Chair of Mechanics (400)

Organisational unit: Chair

151 - 200 out of 809Page size: 50

Research output

  1. 2019
  2. Published

    A numerical modeling strategy for the damage-relevant evaluation of metrologically inaccessible thermo-mechanical milling tool loads

    Nemetz, A., 2019

    Research output: Thesis › Doctoral Thesis

  3. Published

    A Sequential Finite Volume Method / Finite Element Analysis of a Power Electronic Semiconductor Chip

    Gschwandl, M., Fuchs, P. F., Antretter, T., Pfost, M., Mitev, I., Tao, Q., Krivec, T., Schingale, A. & Decker, M., 2019, p. 1509-1514.

    Research output: Contribution to conference › Paper › peer-review

  4. Published

    Cyclic heat-up and damage-relevant substrate plastification of single- and bilayer coated milling inserts evaluated numerically

    Nemetz, A., Daves, W., Klünsner, T., Ecker, W., Schäfer, J., Czettl, C. & Antretter, T., 2019, In: Surface & coatings technology. 360.2019, February, p. 39-49 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Development of a Simulation Method for the Evaluation of the Driving Dynamics of a Commercial Vehicle with Integrated E-Axle and Leaf Springs

    Bergmayr, T., 2019

    Research output: Thesis › Master's Thesis

  6. Published

    Diffusion-controlled crack propagation in alkali feldspar

    Petrishcheva, E., Rieder, M., Predan, J., Fischer, F.-D., Giester, G. & Abart, R., 2019, In: Physics and Chemistry of Minerals. 46.2019, 1, p. 15-26 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Evolution of grain arrangements with finite grain boundary and triple junction mobility

    Gamsjäger, E. & Svoboda, J., 2019.

    Research output: Contribution to conference › Presentation › Research › peer-review

  8. Published

    Finite element model for predicting the initiation of subsurface damage in railway crossings—A parametric study

    Wiedorn, J., Daves, W., Ossberger, U., Ossberger, H. & Pletz, M., 2019, In: Proceedings of the Institution of Mechanical Engineers. Part F, Journal of rail and rapid transit. 2019, 6, p. Pages 614-628

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Improvement of the rail milling process & Evaluation of its potential for the reduction of rail defects

    Kubin, W., 2019

    Research output: Thesis › Doctoral Thesis

  10. Published

    Influence of bulk energy and triple junction mobility on interface kinetics - A tool for interpretation of experiments

    Hackl, K., Khan, A. U., Fischer, F.-D. & Svoboda, J., 2019, In: Acta materialia. 174.2019, August, p. 310-318 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Kristallplastizitätsbasierte Finite Elemente Modellierung mikromechanischer Experimente

    Waldl, H., 2019

    Research output: Thesis › Master's Thesis

  12. Published

    Modelling of the post-treatment of coating/substrate architectures

    Faksa, L., 2019

    Research output: Thesis › Doctoral Thesis

  13. Published

    Multiphysics finite element simulation of resistance spot welding to evaluate liquid metal embrittlement in advanced high strength steels

    Prabitz, K. M., 2019, Mathematical Modelling of Weld Phenomena 12.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Nonlinear material modeling and simulation of thermoplastics

    Morak, M. M., 2019

    Research output: Thesis › Doctoral Thesis

  15. Published

    Peak-Profilanalyse für In-situ-Hochtemperaturröntgenbeugung

    Ogris, D., 2019

    Research output: Thesis › Master's Thesis

  16. Published

    Residual stress and microstructure evolution in steel tubes for different cooling conditions – Simulation and verification

    Brunbauer, S., Winter, G., Antretter, T., Staron, P. & Ecker, W., 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 747, p. 73-79

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Shot peening-induced plastic deformation of individual phases within a coated WC-Co hard metal composite material including WC plastification

    Faksa, L., Daves, W., Klünsner, T., Maier, K., Antretter, T., Czettl, C. & Ecker, W., 2019, In: Surface & coatings technology. 380.2019, 25 December, 11 p., 125026.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Simulation des dynamischen/akustischen Verhaltens von Steuerkettentrieben

    Grinschgl, M., 2019

    Research output: Thesis › Doctoral Thesis

  19. Published

    Simulation of Phase Transformation and Material Plasticity for Press Hardening

    Tomasch, M., Ecker, W. & Antretter, T., 2019, Proceedings of NUMIFORM 2019: the 13th International Conference on Numerical Methods in Industrial Forming Processes. p. 362-365

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Structure and surface energies of nanoparticles

    Holec, D., Fischer, F.-D. & Vollath, D., 2019.

    Research output: Contribution to conference › Presentation › Research › peer-review

  21. Published

    Thermally induced stress evolution in a Ti-43.5Al-4Nb-1Mo-0.1B electrode during melting in an atomization process

    Bialowas, J., 2019

    Research output: Thesis › Master's Thesis

  22. Published

    Wear of dry-running piston rod sealing rings: modelling and experiments

    Kaufmann, A., 2019

    Research output: Thesis › Doctoral Thesis

  23. 2018
  24. Published

    Crack arrest in thin metallic film stacks due to material- and residual stress inhomogeneities

    Kozic, D., Gänser, H.-P., Brunner, R., Kiener, D., Antretter, T. & Kolednik, O., 31 Dec 2018, In: Thin solid films. p. 14-22 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Kinetics of interaction of impurity interstitials with dislocations revisited

    Svoboda, J., Ecker, W., Razumovskiy, V. I., Zickler, G. A. & Fischer, F.-D., Oct 2018, In: Progress in materials science. 101.2019, April, p. 172-206 35 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    The effect of loading during martensitic transformation of a maraging steel after prior austenite grain size refinement by thermal cycling

    Petersmann, M., Antretter, T. & Sannikov, A., 19 Sept 2018, Sonderbände der Praktischen Metallographie Band 52. p. 207-212 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Sucker Rod String Design Optimization Using an Innovative Finite Element Simulation Approach

    Langbauer, C., Antretter, T. & Hofstätter, H., 1 Sept 2018, In: Oil gas European magazine. 44.2018, III, p. 126-132 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Modelling blast fragmentation of cylinders of mortar and rock

    Iravani, A., Kukolj, I., Ouchterlony, F., Antretter, T. & Åström, J., Jun 2018, Fragblast 12: 12th International Symposium on Rock Fragmentation by Blasting. Schunnesson, H. & Johansson, D. (eds.). Luleå: Luleå Univ. of Technology, p. 597-610 15 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Sucker Rod String Design Optimization using an Innovative Finite Elements Simulation Approach

    Langbauer, C., Hofstätter, H. & Antretter, T., 24 Apr 2018, NAFEMS Nordic Tagungsband 2018. p. 71-73

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Sucker Rod String Design Optimization using an Innovative Finite Elements Simulation Approach

    Langbauer, C., Hofstätter, H. & Antretter, T., 19 Apr 2018, DGMK Tagungsbericht 2018. p. 227 237 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Stress–strain analysis of the antiplane shear problem for an infinite cylindrical inclusion with eigenstrain: an addendum to Arch. Appl. Mech. 2018

    Fischer, F.-D., Zickler, G. A. & Svoboda, J., 2 Apr 2018, In: Archive of applied mechanics. 88.2018, 7, p. 1209-1211 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Influence of accounting for translational motion of grains on grain growth kinetics and size distribution

    Svoboda, J. & Fischer, F.-D., 15 Mar 2018, In: Scripta Materialia. 146.2018, 15 March, p. 255-259 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Low temperature heat capacities and thermodynamic functions described by Debye–Einstein integrals

    Gamsjäger, E. & Wießner, M., 25 Jan 2018, In: Monatshefte für Chemie = Chemical monthly. 149, p. 357-368 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    An innovative concept for interstitial diffusion in stressed crystals

    Svoboda, J., Zickler, G. A. & Fischer, F.-D., 2018, In: International journal of solids and structures. p. 173-180

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    An In-Situ LSCM Study on Bainite Formation in a Fe-0.2C-1.5Mn-2.0Cr Alloy

    Sainis, S., Farahani, H., Gamsjäger, E. & van der Zwaag, S., 2018, In: Metals : open access journal . 8, 498, p. 1-22 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Anisotropy of Interstitial Diffusion in bcc-crystals due to Stress-Induced Unequal Occupancies of Different Types of Sites

    Svoboda, J. & Fischer, F.-D., 2018, In: International journal of solids and structures. 152-153, p. 66-70

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Crystallography-microstructure-relations of hierarchical lath martensite from a micromechanical point of view

    Petersmann, M., 2018

    Research output: Thesis › Doctoral Thesis

  38. Published

    Deep drawing of press hardening steels

    Tomasch, M., Ecker, W., Kaiser, R. & Antretter, T., 2018, Journal of Physics: Conference Series. IOP Publishing Ltd., Vol. 1063. 012038

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Designing nanoindentation simulation studies by appropriate indenter choices: Case study on single crystal tungsten

    Goel, S., Cross, G., Stukowski, A., Gamsjäger, E., Beake, B. & Agrawal, A., 2018, In: Computational materials science. 152, p. 196-210 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Development of an automated preprocessor for the micromechanical modeling of foundry sands

    Ralph, B., 2018

    Research output: Thesis › Master's Thesis

  41. Published

    Elastic stress-strain analysis of an infinite cylindrical inclusion with eigenstrain

    Fischer, F.-D., Zickler, G. & Svoboda, J., 2018, In: Archive of applied mechanics. 88, p. 453-460

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Evaluation of Digital Image Correlation Techniques for the Determination of Coefficients of Thermal Expansion for Thin Reinforced Polymers

    Gschwandl, M., Frewein, M., Fuchs, P. F., Antretter, T., Pinter, G. G. & Novàk, P., 2018.

    Research output: Contribution to conference › Poster › Research

  43. Published

    Evaluation of Digital Image Correlation Techniques for the Determination of Coefficients of Thermal Expansion for Thin Reinforced Polymers

    Gschwandl, M., Frewein, M., Fuchs, P. F., Antretter, T., Pinter, G. G. & Novàk, P., 2018, EMAP 2018 Conference Proceedings. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Gradient polymer composites for optimum heat dissipation

    Marx, P., Morak, M., Gschwandl, M., Fuchs, P., Antretter, T., Pfost, M., Kern, W. & Wiesbrock, F., 2018, In: Journal of the American Chemical Society. 2, 1 p., PMSE-772.

    Research output: Contribution to journal › Meeting Abstract

  45. Published

    Grain growth controlled by grain boundary and boundary junction migration

    Ogris, D. & Gamsjäger, E., 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  46. Published

    Influene of accounting for translational motion of grains on grain growth kinetics and size distribution

    Svoboda, J. & Fischer, F.-D., 2018, In: Scripta materialia. 146, p. 225-259

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Kinetics of grain boundary networks controlled by triple junction and grain boundary mobility

    Gamsjäger, E., Ogris, D. & Svoboda, J., 2018, In: Metals : open access journal . 8, 977, p. 1 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Kinetics of Grain Boundary Segregation in Multicomponent Systems – The Example of a Mo-C-B-O System

    Scheiber, D., Romaner, L., Fischer, F.-D. & Svoboda, J., 2018, In: Scripta materialia. 150, p. 110-114 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Model Free Kinetics coupled with Finite Element Method for curing simulation of thermosetting epoxy resins

    Tao, Q., Pinter, G. G., Antretter, T., Krivec, T. & Fuchs, P., 2018, In: Journal of Applied Polymer Science. p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Modeling Dry Wear of Piston Rod Sealing Elements of Reciprocating Compressors Considering Gas Pressure Drop Across the Dynamic Sealing Surface

    Kaufmann, A., Lindner-Silwester, T. & Antretter, T., 2018, In: Journal of tribology (Transactions of the ASME).

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Numerical Analysis of Residual Stress and Crack Networks in CVD Multilayer Coated Cutting Tools

    Velic, D., 2018

    Research output: Thesis › Master's Thesis

  52. Published

    Surface energy of nanoparticles - influence of particle size and structures

    Vollath, D., Fischer, F.-D. & Holec, D., 2018, In: Beilstein journal of nanotechnology (Online-Ressource). 2018, 9, p. 2265-2276 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...17 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18/III, 8700 Leoben
  • Main phone number: +43 3842 402 4001