Chair of Mechanics (400)

Organisational unit: Chair

101 - 150 out of 809Page size: 50

Research output

  1. 2021
  2. Published

    Numerical model for predicting liquid metal cracking during resistance spot welding of advanced high strength steels

    Prabitz, K. M., 2021, 12th International Conference on Zinc & Zinc Alloy Coated Steel Sheet - Galvatech.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Simulation der thermischen Belastung blockgebremster Eisenbahnräder

    Scheinast, D., 2021

    Research output: Thesis › Master's Thesis

  4. Published

    Thermodynamic and kinetic modelling of the dissolution process of lime particles in BOF slags

    Ogris, D. M., Schenk, J. & Gamsjäger, E., 2021.

    Research output: Contribution to conference › Paper › peer-review

  5. Published

    Virtual System Evaluation of High Sensitive Pressure Sensor in Interaction with Printed Circuit Boards

    Veerappa Yalagach, M., 2021

    Research output: Thesis › Doctoral Thesis

  6. Published

    Wärmebehandlungssimulation von massiven Werkzeugen

    Schemmel, M., 2021

    Research output: Thesis › Doctoral Thesis

  7. 2020
  8. Published

    Transient phase fraction and dislocation density estimation from in-situ X-ray diffraction data with a low signal-to-noise ratio using a Bayesian approach to the Rietveld analysis

    Wiessner, M., Angerer, P., van der Zwaag, S. & Gamsjäger, E., 25 Dec 2020, In: Materials characterization. 172.2021, February, 9 p., 110860.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Numerical analysis of a MEMS sensor's deformation behavior considering dynamic moisture conditions

    Yalagach, M., Fuchs, P. F., Antretter, T., Qi, T. & Weber, M., 2 Dec 2020, 2020 IEEE 22nd Electronics Packaging Technology Conference, EPTC 2020. Institute of Electrical and Electronics Engineers, p. 380-385 6 p. 9315091. (2020 IEEE 22nd Electronics Packaging Technology Conference, EPTC 2020).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    On the treatment of non-reciprocal rate-independent kinetics via thermodynamic extremal principles

    Hackl, K., Fischer, F.-D. & Svoboda, J., Dec 2020, In: Journal of the mechanics and physics of solids. 145, p. 104149-1-7 7 p., 104149.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Coupled damage variable based on fracture locus: Prediction of ductile failure in a complex structure

    Baltic, S., Magnien, J., Gänser, H.-P., Antretter, T. & Hammer, R., 23 Oct 2020, In: International journal of solids and structures. 207.2020, December, p. 132-144 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Too much to ask for oder Wie ein Moodle Server bei laufender Prüfung in die Knie gezwungen wird

    Orthaber, M. & Antretter, T., 8 Oct 2020, <fnma> Magazin 03|2020. Graz, Vol. 03/2020.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Education

  13. Published

    On an alternative approach for simulating chemically induced crack pattern evolutions in a single crystal

    Predan, J., Kegl, M., Abart, R., Fischer, F.-D. & Rammerstorfer, F. G., 1 Oct 2020, In: International journal of solids and structures. 202, p. 575-586 12 p., 202.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Cycled hydrogen permeation through Armco iron – A joint experimental and modeling approach

    Drexler, A., Siegl, W., Ecker, W., Tkadletz, M., Klösch, G., Schnideritsch, H., Mori, G. K., Svoboda, J. & Fischer, F.-D., 23 Sept 2020, In: Corrosion science. 176.2020, November, 11 p., 109017.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Evolution of a generic two-dimensional grain structure as a model for grain growth in microalloyed steels

    Gamsjäger, E. & Svoboda, J., 22 Sept 2020.

    Research output: Contribution to conference › Presentation › Research › peer-review

  16. Published

    Constraints in thermodynamic extremal principles for non-local dissipative processes

    Hackl, K., Fischer, F.-D. & Svoboda, J., 1 Sept 2020, In: Continuum Mechanics and Thermodynamics. 32, 5, p. 1337-1345 9 p., 32.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Modelling of short-range ordering kinetics in dilute multicomponent substitutional solid solutions

    Svoboda, J., Holec, D., Popov, M., Zickler, G. & Fischer, F.-D., 2 Aug 2020, In: Philosophical magazine. 100.2020, 15, p. 1942-1961 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    EXAM-ON-DEMAND: SCHRIFTLICHE ONLINE-PRÜFUNGEN ALS ANTWORT AUF DEN LOCKDOWN

    Orthaber, M. & Antretter, T., 31 Jul 2020, fnma Magazin 02/2020 - E-Assessment und E-Examinations . Graz, Vol. 02/2020. p. 47 - 49 3 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Education

  19. Published

    Concepts for E-Assessments in STEM on the Example of Engineering Mechanics: How to Assess Complex EngineeringProblemsElectronically

    Orthaber, M., Stütz, D., Antretter, T. & Ebner, M., 26 Jun 2020, In: International journal emerging technologies in learning : iJET. 15.2020, 12, p. 136-152 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Local approach for coarsening of precipitates

    Svoboda, J., Shan, Y. V., Zickler, G. A., Kozeschnik, E. & Fischer, F.-D., 15 Mar 2020, In: Scripta materialia. 178.2020, 15 March, p. 232-235 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Surface Energy of Au Nanoparticles Depending on Their Size and Shape

    Holec, D., Dumitraschkewitz, P., Vollath, D. & Fischer, F.-D., 8 Mar 2020, In: Nanomaterials. 10.2020, 3, p. 1-15 15 p., 484.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Influence of Finite Mobilities of Triple Junctions on the Grain Morphology and Kinetics of Grain Growth

    Gamsjäger, E., Gschöpf, B. & Svoboda, J., 27 Jan 2020, In: Metals : open access journal . 10.2020, 18 p., 185.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Model-Based Residual Stress Design in Multiphase Seamless Steel Tubes

    Leitner, S., Winter, G., Klarner, J., Antretter, T. & Ecker, W., 16 Jan 2020, In: Materials. 13.2020, 2, 12 p., 439.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    On solute depletion zones along grain boundaries during segregation

    Scheiber, D., Jechtl, T., Svoboda, J., Fischer, F.-D. & Romaner, L., 1 Jan 2020, In: Acta materialia. 182.2022, 1 January, p. 100-107 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    A Modeling Framework for Enhanced Reliability of Printed Circuit Boards and Power Electronics

    Gschwandl, M., 2020

    Research output: Thesis › Doctoral Thesis

  26. Published

    Bewertung numerischer Methoden für die Simulation von induktivem Erwärmen von Maschinenbauteilen

    Gschwentner, A., 2020

    Research output: Thesis › Master's Thesis

  27. Published

    Crossings – Deformation, Damage and Optimization

    Wiedorn, J., 2020

    Research output: Thesis › Doctoral Thesis

  28. Published

    Dilatometer experiments to determine the phase transformation kinetics and TRIP behavior for predeformed 20MnB8 steel sheets

    Tomasch, M., Ecker, W., Antretter, T. & Stockinger, M. (Publisher), 2020, XXXIX. Verformungskundliches Kolloquium, Tagungsband. Vol. 39. p. 72-77

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Numerical analysis of a high speed large engine connecting rod

    Gschwandl, T. J., 2020

    Research output: Thesis › Master's Thesis

  30. Published

    Numerical Simulation of Crack Propagation during the Deformation of Galvanized PHS Sheets

    Hammer, P. J., 2020

    Research output: Thesis › Master's Thesis

  31. Published

    Residual stress evolution in low-alloyed seamless steel tubes: A simulation based approach on three different length scales

    Leitner, S., 2020

    Research output: Thesis › Doctoral Thesis

  32. 2019
  33. Published

    Constitutive modeling of anisotropic plasticity with application to fiber-reinforced composites

    Nagaraja, S. G., Pletz, M. & Schuecker, C., 15 Dec 2019, In: International journal of solids and structures. 180-181.2019, 15 December, p. 84-96 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. E-pub ahead of print

    The Emergence of Complexity from a Simple Model for Tissue Growth

    Dunlop, J. W. C., Zickler, G., Weinkamer, R., Fischer, F.-D. & Fratzl, P., 14 Dec 2019, (E-pub ahead of print) In: Journal of statistical physics. 2019, December, p. 1-15 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Coupled damage variable based on fracture locus: Modelling and calibration

    Baltic, S., Magnien, J., Gänser, H.-P., Antretter, T. & Hammer, R., 23 Nov 2019, In: International journal of plasticity. 126.2020, March, 24 p., 102623.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    E-ASSESSMENT IN ENGINEERING MECHANICS: HOW DOES IT COMPARE TO CLASSICAL PAPER-PENCIL EXAMS?

    Orthaber, M., Antretter, T., Jurisits, R. & Schemmel, M., 11 Nov 2019, 12TH INTERNATIONAL CONFERENCE OF EDUCATION, RESEARCH AND INNOVATION (ICERI2019). p. 9381-9390

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    EXPERIENCES WITH A BLENDED LEARNING CONCEPT IN A FIRST YEAR ENGINEERING MECHANICS COURSE

    Orthaber, M., 11 Nov 2019, 12TH INTERNATIONAL CONFERENCE OF EDUCATION, RESEARCH AND INNOVATION (ICERI2019). p. 9229-9239

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. E-pub ahead of print

    Driving Forces on Dislocations - An Analytical and Finite Element Study

    Kolednik, O., Ochensberger, W., Predan, J. & Fischer, F.-D., 9 Nov 2019, (E-pub ahead of print) In: International journal of solids and structures. 190.2020, May, p. 181-198 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. E-pub ahead of print

    Are Onsager's reciprocal relations necessary to apply Thermodynamic Extremal Principles?

    Hackl, K., Fischer, F.-D., Zickler, G. & Svoboda, J., 8 Nov 2019, (E-pub ahead of print) In: Journal of the mechanics and physics of solids. 135.2020, February, 6 p., 103780.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    The creep behavior of a fully lamellar γ-TiAl based alloy

    Burtscher, M., Klein, T., Mayer, S., Clemens, H. & Fischer, F. D., 1 Nov 2019, In: Intermetallics. 114.2019, November, 9 p., 106611.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Thermodynamic and mechanical stability of Ni3X-type intermetallic compounds

    Kulo, N., He, S., Ecker, W., Pippan, R., Antretter, T. & Razumovskiy, V. I., Nov 2019, In: Intermetallics. 114.2019, November, 9 p., 106604.

    Research output: Contribution to journal › Article › Research › peer-review

  42. E-pub ahead of print

    Damage tolerance of lamellar bone

    Razi, H., Predan, J., Fischer, F.-D. & Fratzl, P., 24 Oct 2019, (E-pub ahead of print) In: Bone. 130.2020, January, 7 p., 115102.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Cyclic plastic deformation of rails in rolling/sliding contact –quasistatic FE calculations using different plasticity models

    Pletz, M., Meyer, K. A., Künstner, D., Scheriau, S. & Daves, W., 15 Oct 2019, In: Wear. 436-437.2019, 15 October, 10 p., 202992.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Surface tension determines tissue shape and growth kinetics

    Ehrig, S., Schamberger, B., Bidan, C. M., West, A., Jacobi, C., Lam, K., Kollmannsberger, P., Petersen, A., Tomancak, P., Kommareddy, K., Fischer, F.-D., Fratzl, P. & Dunlop, J. W. C., 11 Sept 2019, In: Science Advances. 5.2019, 9, 8 p., eaav9394.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Unifcation of the non-linear geometric transformation theory of martensite and crystal plasticity - Application to dislocated lath martensite in steels

    Petersmann, M., Antretter, T., Cailletaud, G., Sannikov, A., Ehlenbröker, U. & Fischer, F.-D., Aug 2019, In: International journal of plasticity. 119.2019, August, p. 140-155 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Influence of misfit stress relaxation by power-law creep and plasticity on kinetics of coarsening of precipitates

    Svoboda, J., Yao, S., Kozeschnik, E. & Fischer, F.-D., 15 Jul 2019, In: Scripta materialia. 2019, Vol.168, p. 81-85 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Investigation of deformation mechanisms in manganese steel crossings using FE models

    Wiedorn, J., Daves, W., Ossberger, U., Ossberger, H. & Pletz, M., 13 Jun 2019, In: Tribology International. 138.2019, October, p. 424-434 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    The Effect of Loading during Martensitic Transformation of a Margaging Steel after Prior Austenite Grain Size Refinement by Thermal Cycling

    Petersmann, M., Antretter, T., Sannikov, A., Sartory, B. & Ehlenbröker, U., 30 May 2019, In: Practical metallography = Praktische Metallographie. 56.2019, 6, p. 360-372 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Kinetics of grain arrangements controlled by grain boundary and triple junction migration – Experiments and Modeling

    Gamsjäger, E. & Svoboda, J., 20 May 2019.

    Research output: Contribution to conference › Presentation › Research › peer-review

  50. Published

    Real-Time Measurement of Dynamic Wheel-Rail Contacts Using Ultrasonic Reflectometry

    Zhou, L., Brunskill, H., Pletz, M., Daves, W., Scheriau, S. & Lewis, R., 16 Apr 2019, In: Journal of Tribology. 141.2019, 6, 9 p., 061401.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Debye-Einstein models for heat capacities of crystalline solids

    Gamsjäger, E. & Wießner, M., 8 Apr 2019.

    Research output: Contribution to conference › Presentation › Research › peer-review

  52. Published

    An improved engineering approach to assess crack arrays: an Addendum to Arch. Appl. Mech. 84 (2014) 1325–1337

    Kienzler, R., Fischer, F.-D. & Wessel, A., Apr 2019, In: Archive of applied mechanics. 89.2019, 4, p. 731 - 736 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Deformation-induced phase transformation in a Co-Cr-W-Mo alloy studied by high-energy X-ray diffraction during in-situ compression tests

    Weißensteiner, I., Petersmann, M., Erdely, P., Stark, A., Antretter, T., Clemens, H. & Maier-Kiener, V., Feb 2019, In: Acta materialia. 164.2019, February, p. 272-282 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...17 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18/III, 8700 Leoben
  • Main phone number: +43 3842 402 4001