Chair of Mechanical Engineering (140)

Organisational unit: Chair

1 - 50 out of 1,377Page size: 50

Research output

  1. 2025
  2. Published

    Wasserstoff als nachhaltiger Energieträger – Dimensionieren im Maschinenbau

    Grun, F., Oberreiter, P. & Renhart, P., 4 Mar 2025, 20. Kraftfahrzeug – Symposium - Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Hydrodynamic performance testing of artificial textures using a novel pin-on-disc test method

    Pusterhofer, M., Maier, M., Scharf, R., Haumer, F. & Grün, F., 17 Feb 2025, In: Frontiers in Mechanical Engineering. 11.2025, 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Impact of tensile specimen properties on hydrogen embrittlement testing using hollow specimens

    Oberreiter, P., Winter, G., Grun, F. & Drexler, A., 12 Feb 2025.

    Research output: Contribution to conference › Presentation › Research › peer-review

  5. Published

    Fatigue Assessment of Precorroded AlSi9Cu3 Specimens Incorporating Short Crack Propagation

    Oberreiter, P., Schönowitz, M., Maier, B. & Grün, F., 9 Feb 2025, In: Fatigue and Fracture of Engineering Materials and Structures. ??? Stand: 27. Februar 2025, ??? Stand: 27. Februar 2025, 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Finite Element Investigation of the Dynamic Behavior of High-Speed Turnouts with Swing-Nose Crossing

    Sistaninia, M., Daves, W., Bucher, C., Antretter, T. & Gänser, H. P., 2025, Advances in Dynamics of Vehicles on Roads and Tracks III - Proceedings of the 28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023, Rail Vehicles. Huang, W. & Ahmadian, M. (eds.). p. 1047-1058 12 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    On the Road Towards Understanding Squats - Metallographic Investigations of Rails

    Gschwandl, T., Spalek, A., Antretter, T. & Daves, W., 2025, Advances in Dynamics of Vehicles on Roads and Tracks III - Proceedings of the 28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023, Rail Vehicles. Huang, W. & Ahmadian, M. (eds.). p. 314-323 10 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. 2024
  9. Published

    Development of a novel aerosol-lubricated ring-on-liner test methodology

    Gussmagg, J., Pusterhofer, M., Breitegger, M. & Grün, F., 31 Dec 2024, In: Tribologia : Finnish Journal of Tribology. 41.2024, 3-4, p. 49-51 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Investigation of fracture mechanical properties of a brass alloy with microstructural variations

    Klaushofer, M., Stoschka, M., Maier, B. & Grün, F., 25 Nov 2024, In: Engineering Fracture Mechanics. 311.2024, 25 November, 22 p., 110564.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Neue Ansätze zur Berücksichtigung des Korrosionseinflusses auf die Schwingfestigkeit von Aluminium-Bauteilen

    Schönowitz, M., Oberreiter, P., Maier, B. & Grun, F., 9 Oct 2024.

    Research output: Contribution to conference › Presentation › Research › peer-review

  12. Published

    Fatigue Life Assessment of Corroded AlSi10MgMn Specimens

    Schönowitz, M., Fladischer, S., Oberreiter, P., Maier, B., Grün, F. & Bauer-Troßmann, K., 5 Oct 2024, In: Metals : open access journal . 14.2024, 10, 20 p., 1135.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    An Investigation into the Optimal Dimple Geometry in a Single-Dimple Sliding Contact

    Scharf, R., Pusterhofer, M., Gussmagg, J. & Grün, F., 5 Sept 2024, In: Machines : open access journal . 12.2024, 9, 16 p., 622.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    FATIGUE LIMIT ASSESSMENT OF INTERACTING SMALL DEFECTS BY CYCLIC R-CURVE ANALYSIS

    Fladischer, S., Stoschka, M. & Grun, F., 26 Aug 2024.

    Research output: Contribution to conference › Abstract › peer-review

  15. Published

    EHD simulation study on the influence of measured ICE compression piston ring profiles on the lubrication film formation

    Gussmagg, J., Maier, M., Pusterhofer, M. & Grün, F., 20 Jul 2024, In: Tribology International. 199.2024, November, 10 p., 110015.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Emergence of Coated Piston Ring Scuffing Behavior on an Application-Oriented Tribological Model Test System

    Markut, T., Summer, F., Pusterhofer, M. & Grün, F., 14 Jun 2024, In: Lubricants. 12.2024, 6, 25 p., 218.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Service Strength Assessment of Macroscopic Imperfections in Cast Steel Alloys

    Stoschka, M., Horvath, M., Mössler, W. & Grun, F., 13 Jun 2024.

    Research output: Contribution to conference › Paper › peer-review

  18. Published

    Detection of characteristic frequencies of roller bearing deflections

    Kraffczyk, F., 23 May 2024.

    Research output: Contribution to conference › Poster › Research

  19. Published

    Fatigue investigations under complex loading conditions in the elasto-plastic material regime

    Oberreiter, P., 23 May 2024.

    Research output: Contribution to conference › Poster › Research

  20. Published

    Impact of microstructural features on the fatigue strength of cast alloys by means of a layer-based approach

    Oberreiter, M., 23 May 2024.

    Research output: Contribution to conference › Poster › Research

  21. Published

    Influence of corrosion on the service life of aluminium alloys

    Schönowitz, M., 23 May 2024.

    Research output: Contribution to conference › Poster › Research

  22. Published

    Local fatigue strength assessment of cast steel components considering manufacturing effects

    Horvath, M., 23 May 2024.

    Research output: Contribution to conference › Poster › Research

  23. Published

    Numerical fatigue crack growth simulation considering crack closure and interaction effects

    Fladischer, S., 23 May 2024.

    Research output: Contribution to conference › Poster › Research

  24. Published

    Textured surfaces in tribology: Surface modifications in full film and mixed lubrication

    Scharf, R., 23 May 2024.

    Research output: Contribution to conference › Poster › Research

  25. Published

    Effect of mechanical recycling on short glass fibre reinforced polyamide 6,6 from post-industrial waste

    Salvi, A., Lucyshyn, T., Marano, C., Ostrowska, M., Vangosa, F. B., Dotelli, G. & Holzer, C., 8 May 2024, In: AIP Conference Proceedings. 3158, 1, 120005.

    Research output: Contribution to journal › Conference article › peer-review

  26. Published

    Multi-Material Implant Structures with Medical-Grade Polyurethane via Additive Manufacturing

    Hentschel, L., Petersmann, S., Gradischar, A., Lebschy, C., Lindenmann, J., Smolle-Juettner, F., Gonzalez-Gutierrez, J., Dias, A., Kynast, F., Hammer, N., Schäfer, U. & Holzer, C., 8 May 2024, In: AIP Conference Proceedings. 3158, 1, 150005.

    Research output: Contribution to journal › Conference article › peer-review

  27. Published

    Influence of corrosion fatigue on the stress gradient effect of the aluminium alloy EN AW-6082 T6

    Schönowitz, M., Maier, B. & Grün, F., 9 Apr 2024, In: International Journal of Fatigue. 184.2024, July, 10 p., 108322.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    A Comprehensive Numerical Study of a Wedge-Shaped Textured Convergent Oil Film Gap

    Scharf, R., Maier, M., Pusterhofer, M. & Grün, F., 5 Apr 2024, In: Lubricants. 12.2024, 4, 20 p., 121.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    A comprehensive methodology for criticality assessment of microvias in printed circuit board assemblies

    Kamble, V. G., Patel, D. R., Schipfer, C., Thalhamer, A., Zuendel, J., Krivec, T., Antretter, T. & Fuchs, P. F., 2024, 2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024. Institute of Electrical and Electronics Engineers, (2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Capability of microstructure simulation to study cyclic behaviour of aluminium cast alloys

    Smit, T., 2024

    Research output: Thesis › Master's Thesis

  31. Published

    Concept development of a body-integrated battery housing

    Riahi Samani, A., 2024

    Research output: Thesis › Master's Thesis

  32. Published

    Development of a novel aerosol-lubricated ring-on-liner test methodology

    Gussmagg, J., Pusterhofer, M. & Grun, F., 2024.

    Research output: Contribution to conference › Presentation › Research › peer-review

  33. Published

    Einflüsse der Betriebsparameter auf den Hochtemperaturverschleiß von Walzstraßenkomponenten

    Hofbauer, T., 2024

    Research output: Thesis › Master's Thesis

  34. Published

    Enhanced simulation methodology and assessment for efficient Ti-6Al-4V WAAM component manufacturing

    Springer, S., 2024

    Research output: Thesis › Doctoral Thesis

  35. Published

    Experimentelle Evaluierung der Fresstragfähigkeit von Kolbenringen mit verschiedenen chrombasierten Schichten

    Breitegger, M., 2024

    Research output: Thesis › Master's Thesis

  36. Published

    Exploring the Impact of Laser Drilling on Material Thermal Decomposition: A Computational Study Using KratosMultiphysics

    Peng, C., Tao, Q., Krivec, T., Casas, G., Latorre, S., Antretter, T., Macher, J. & Fuchs, P., 2024, 2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024. Institute of Electrical and Electronics Engineers, (2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Impact of microstructural features on the fatigue strength of cast alloys by means of a layer-based approach

    Oberreiter, M., 2024

    Research output: Thesis › Doctoral Thesis

  38. Published

    Influence of Carbon Material Properties on Slag-Foaming Dynamics in Electric Arc Furnaces: A Review

    Kieush, L. & Schenk, J., 2024, In: Steel research international. ??? Stand: 11. Februar 2025, ??? Stand: 11. Februar 2025

    Research output: Contribution to journal › Review article › peer-review

  39. Published

    In-Situ Vibrationsmessung an Hydraulikaggregaten zur Inbetriebnahme eines Condition Monitoring Systems

    Raffl, S., 2024

    Research output: Thesis › Master's Thesis

  40. Published

    Investigation and digital system characterization of acoustic emission signals from selected tribological contacts

    Strablegg, C., 2024

    Research output: Thesis › Doctoral Thesis

  41. Published

    Konstruktion und Auslegung eines Brennstoffzellensystems für ein Side-by-Side-Fahrzeug

    Jörg, V., 2024

    Research output: Thesis › Master's Thesis

  42. Published

    Konzeptionierung und Evaluierung einer in-situ Verschleißmessung an experimentellen Gleitlagermodellprüfungen

    Ball, T., 2024

    Research output: Thesis › Master's Thesis

  43. Published

    Local fatigue strength assessment of cast steel components considering manufacturing effects

    Horvath, M., 2024

    Research output: Thesis › Doctoral Thesis

  44. Published

    Oberflächenmodifikationen in geschmierten Kontakten - ein Multiskalenansatz zur Verschleiß- und Reibungsbewertung

    Maier, M., 2024

    Research output: Thesis › Doctoral Thesis

  45. Published

    PLASMA MODIFICATION OF POLYACRYLONITRILE POWDER OR SOLUTION PRIOR ELECTROSPINNING

    Pijáková, B., Elbataioui, A., Rafailovic, L., Bautista, A. D., Schlögl, S., Dvořáková, E., Mühlbacher, I. & Ráheľ, J., 2024, NANOCON 2023 - 15th International Conference on Nanomaterials - Research and Application, Conference Proceedings. p. 154-159 6 p. (NANOCON Conference Proceedings - International Conference on Nanomaterials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Single and Multi-material Topology Optimization of Continuum Structures: ABAQUS Plugin

    Patel, D., Rockenbauer, T., Schlögl, S. & Lang, M., 2024, Mathematical Modeling in Physical Sciences - 12th IC-MSQUARE, 2023. Vlachos, D. (ed.). Springer, p. 3-17 15 p. (Springer Proceedings in Mathematics and Statistics; vol. 446).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Untersuchung des Einflusses von Einschlüssen auf die Schwingfestigkeit von 26NiCrMoV14-5 in Schmiedeteilen für den Schwermaschinenbau

    Sampl, R., 2024

    Research output: Thesis › Master's Thesis

  48. Published

    Untersuchung des Rissfortschritts an bauteilähnlichen Strukturen einer Al-Si-Gusslegierung unter Schwingbeanspruchung

    Korenjak, A., 2024

    Research output: Thesis › Master's Thesis

  49. Published

    Werkstoffkennwerte aus dem Tabellenbuch – Quo vadis?

    Grun, F., 2024, Kfz-Symposium 2024: Neue Technologien und Innovationen in der Fahrzeugtechnik XIX.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Werkstoffliche Charakterisierung einer Messinglegierung in Komponenten des Schwermaschinenbaus

    Vollnhofer, M., 2024

    Research output: Thesis › Master's Thesis

  51. 2023
  52. Published

    In-depth study of direct and derived acoustic emission parameters and their information content for classifying lubricated tribological sliding contacts

    Strablegg, C., Summer, F., Renhart, P., Pusterhofer, M. & Grün, F., Dec 2023, In: Tribology International. 2023, Vol.190*December, 17 p., 109028.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Fretting Wear of Thermoplastic Polyurethane (TPU): The Role of Environmental Conditions

    Tockner, M., Staudinger, P., Fasching, M., Schwarz, T., Summer, F., Grun, F. & Hausberger, A., 30 Sept 2023, Proceedings of 9th International Tribology Conference, ITC Fukuoka 2023.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 6 7 8 ...28 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 1401