Chair of Materials Physics (430)

Organisational unit: Chair

1601 - 1650 out of 1,986Page size: 50

Research output

  1. 2008
  2. Published

    Thermal Stresses and Microstructure of Tungsten Films on Copper

    Kapp, M., Martinschitz, K. J., Keckes, J., Lackner, J. M., Zizak, I. & Dehm, G., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 517, p. 273-277

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Trends in the Development of New Mg Alloys

    Bamberger, M. & Dehm, G., 2008, In: Annual review of materials research. 38, p. 505-533

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Tribological behavior of TiN/Ag nanocomposite coatings

    Köstenbauer, H., Fontalvo, G., Mitterer, C. & Keckes, J., 2008, In: Tribology Letters. p. 53-60

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Ultimate strength of a tungsten heavy alloy after severe plastic deformation at quasi-static and dynamic loading

    Meyer, L. W., M., H., Hohenwarter, A. & Schneider, S., 2008, In: Materials Science Forum . 584-586, p. 405-410

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Visualizing the Behavior of Dislocations - Seeing Is Believing

    Robertson, I. M., Ferreira, P. J., Dehm, G., Hull, R. & Stach, E. A., 2008, In: MRS Bulletin. 33, p. 122-131

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2007
  8. Published

    A comparison of different distributions of azimuth angles in the sin(2) psi-method

    Ortner, B., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 98, p. 87-90

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    A Comparison of the Electronic Structure of N-K in TiN and VN using EELS and ab-initio Calculations

    Rashkova, B., Kothleitner, G., Sturm, S., Scheu, C., Kutschej, K., Mitterer, C., Lazar, P., Redinger, J., Podloucky, R. & Dehm, G., 2007, Microscopy and Microanalysis. p. 414-415

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    A direct method of determining complex depth profiles of residual stresses in thin films on a nanoscale

    Massl, S., Keckes, J. & Pippan, R., 2007, In: Acta materialia. 55, p. 4835-4844

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    A micromechnics-based model for micro-toughness estimation from dimple geometry measurements

    Srinivasan, K., Kolednik, O. & Siegmund, T., 2007, In: Engineering Fracture Mechanics. 74, p. 1323-1343

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Analysis of roughness-induced crack closure based on asymmetric crack-wake plasticity and size ratio effect

    Pippan, R. & Pokluda, J., 2007, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. A462, p. 355-358

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Annealing of intrinsic stresses in sputtered TiN films: The role of thickness-dependent gradients of point defect density

    Köstenbauer, H., Fontalvo, G., Kapp, M., Keckes, J. & Mitterer, C., 2007, In: Surface & coatings technology. 201, p. 4777-4780

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Application of material forces to fracture of inhomogeneous materials: illustrative examples

    Fischer, F. D., Predan, J., Kolednik, O. & Simha, N. K., 2007, In: Archive of applied mechanics. 77, p. 95-112

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Aufklärung der Verformungsvorgänge bei der Hochverformung

    Hafok, M., 2007, 179 p.

    Research output: Thesis › Doctoral Thesis

  16. Published

    Changes in the mechanical properties of a pearlitic steel due to large shear deformation

    Wetscher, F., Stock, R. & Pippan, R., 2007, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 445-446, p. 237-243

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Characteristics of an Optimised Active Metal Cast Joint between Copper and C/C

    Schedler, B., Huber, T., Friedrich, T., Eidenberger, E., Kapp, M., Scheu, C., Pippan, R. & Clemens, H., 2007, In: Physica scripta. T128, p. 200-2003

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Characterization of mechanical properties on the micron size. Bericht 1

    Kiener, D. & Dehm, G., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    Characterization of mechanical properties on the micron size. Bericht 2

    Kiener, D. & Dehm, G., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Combination of ab-initio and N-K, Ti-L2,3, V-L2,3 electron energy-loss near edge structure studies for TiN and VN films

    Rashkova, B., Lazar, P., Redinger, J., Podloucky, R., Kothleitner, G., Sturm, S., Kutschej, K., Mitterer, C., Scheu, C. & Dehm, G., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 98, p. 1060-1065

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Comparison of single crystalline and polycrystalline behavior under high pressure torsion

    Hafok, M. & Pippan, R., 2007, In: Materials Science Forum . 550, p. 227-282

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Conventional TEM investigation of the FIB damage in copper

    Kiener, D., Jörg, T., Rester, M., Motz, C. & Dehm, G., 2007, In: Microscopy and microanalysis. 13, p. 100-101

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Conventional TEM Investigation of the FIB Damage in Copper

    Kiener, D., Jörg, T., Rester, M., Motz, C. & Dehm, G., 2007, Microscopy Conference, International Forum for Advanced Microscopy. p. 100-101

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Crack initiation and growth in CrN coated tool steels

    Daniel, R., Endler, S., Ebner, R. & Kolednik, O., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  25. Published

    Damage development during cyclic loading - from micro to macro properties. Bericht 1

    Yang, B. & Dehm, G., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    Damage development during cyclic loading - from micro to macro properties. Bericht 2

    Yang, B. & Dehm, G., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    Damage evolution in a chromium nitride coated tool steel under monotonic and cyclic loading

    Endler, S. B., Daniel, R., Schöngrundner, R., Ebner, R. & Kolednik, O., 2007, International Symposium on Reactive Sputter Deposition. p. 53-53

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Development of texutre in polycrystalline CrN coatings: The role of a Cr interlayer

    Daniel, R., Martinschitz, K. J., Keckes, J. & Mitterer, C., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    Discrete dislocation simulation of nanoindentation: Indentation size effect and the influence of slip band orientation

    Kreuzer, H. G. M. & Pippan, R., 2007, In: Acta materialia. 55, p. 3229-3235

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Drawing of self-reinforced cellulose films

    Gindl, W. & Keckes, J., 2007, In: Journal of Applied Polymer Science. 103, p. 2703-2708

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Dynamical growth of Cu–Pt nanowires with a nanonecklace morphology

    Inkson, B. J., Dehm, G. & Pen, Y., 2007, In: Nanotechnology. 18, p. 601-606

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Effect of alloying on HPT deformed metals

    Hafok, M. & Pippan, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Ermüdungsrisswachstum in submikrokristallinen Materialien

    Hohenwarter, A. & Pippan, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  34. Published

    Ermüdungsverhalten von hochfesten PM - Werkzeugstählen für die Kaltmassivumformung

    Jesner, G., 2007, 171 p.

    Research output: Thesis › Doctoral Thesis

  35. Published

    Examination of C/C flat tile mock-ups with hypervapotron cooling after high heat flux testing

    Schedler, B., Friedrich, T., Traxler, H., Eidenberger, E., Scheu, C., Clemens, H., Pippan, R. & Escourbiac, F., 2007, In: Fusion engineering and design. 82, p. 299-305

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Experimental studies on epitaxially grown TiN and VN films

    Kutschej, K., Rashkova, B., Shen, J., Edwards, D., Mitterer, C. & Dehm, G., 2007, In: Thin solid films. 516, p. 369-373

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Experimental studies on epitaxially grown TiN and VN films

    Kutschej, K., Rashkova, B., Shen, J., Mitterer, C. & Dehm, G., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    FIB damage of Cu and possible consequences for miniaturized mechanical tests

    Kiener, D., Motz, C., Rester, M., Jenko, M. & Dehm, G., 2007, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 459, p. 262-272

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Fracture of poly(vinylidene fluoride): a combined synchrotron and laboratory in-situ X-ray scattering study

    Maier, G. A., Wallner, G., Lang, R., Keckes, J., Amentisch, H. & Fratzl, P., 2007, In: Journal of applied crystallography. 40, Supplement April, p. s564-s567

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Fracture toughness and crack propagation measurements in ultrafine-grained materials

    Hohenwarter, A. & Pippan, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. Published

    Fracture toughness investigations of tungsten alloys and SPD tungsten alloys

    Faleschini, M., Kreuzer, H., Kiener, D. & Pippan, R., 2007, In: Journal of nuclear materials. 367-370, p. 800-805

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    HASYLAB-User Meeting

    Zickler, G., Jähnert, S., Wagermaier, W., Funari, S. S., Findenegg, G. H. & Paris, O., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    High-temperature residual stresses in thin films characterized by x-ray diffraction substrate curvature method

    Keckes, J., Eiper, E., Martinschitz, K. J., Köstenbauer, H., Daniel, R. & Mitterer, C., 2007, In: Review of scientific instruments. 78, p. 036103-01-036103-03

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Hindered Crack Propagation in Materials with Periodically Varying Young's Modulus - Lessons from Biological Materials

    Fratzl, P., Gupta, H., Fischer, F. D. & Kolednik, O., 2007, In: Advanced materials. 19, p. 2657-2661

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Influence of External and Internal Length Scale of the Flow Stress of Copper

    Kiener, D., Rester, M., Scheriau, S., Yang, B., Pippan, R. & Dehm, G., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 98, p. 1047-1053

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Influence of external and internal length scale on the flow stress of copper

    Kiener, D., Rester, M., Scheriau, S., Yang, B., Pippan, R. & Dehm, G., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 98, p. 1047-1053

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    In situ annealing of severe plastic deformed OFHC copper

    Scheriau, S., Vorhauer, A. & Pippan, R., 2007, In: Materials Science Forum . 558-559, p. 1345-1351

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    In-situ annealing of SPD-OFHC Copper

    Scheriau, S. & Pippan, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  49. Published

    In situ TEM straining of single crystal Au films on polyimide: Change of deformation mechanisms at the nanoscale

    Oh, S. H., Legros, M., Kiener, D., Gruber, P. A. & Dehm, G., 2007, In: Acta materialia. 55, p. 5558-5571

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    In situ-Untersuchung des Wachstums kurzer Risse

    Zelger, C. J., 2007

    Research output: Thesis › Diploma Thesis

  51. Published

    Leaking of Unanchored Tanks Subjected to Cyclic Loading

    Wasicek, M., Fischer, F. D. & Kolednik, O., 2007, Proc. COMPDYN 2007. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Lokales Verformungsverhalten von hochfesten PM-Werkzeugstählen

    Gruber, P., Jesner, G. & Kolednik, O., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1...29 30 31 32 33 34 35 36 ...40 Next
View graph of relations

Contact information

Jahnstrasse 12/I, 8700 Leoben
  • Main phone number: +43 3842 804 112