Chair of Materials Physics (430)

Organisational unit: Chair

1201 - 1300 out of 1,986Page size: 100

Research output

  1. 2013
  2. Published

    Adhesion measurements of printed circuit boards using four point bending

    Cordill, M., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  3. Published

    Advanced beta-solidiying titanium aluminides – Development status and perspectives

    Clemens, H., Schloffer, M., Schwaighofer, E., Werner, R., Gaitzenauer, A., Rashkova, B., Schmölzer, T., Pippan, R. & Mayer, S., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 3-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Advanced cross-sectional characterization of hard coatings

    Tkadletz, M., Mitterer, C., Keckes, J., Rebelo De Figueiredo, M., Hosemann, P., Burghammer, M., Sartory, B. & Czettl, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  5. Published

    An improved long-term nanoindentation creep testing approach for studying the local deformation processes in nanocrystalline metals at room and elevated temperatures

    Maier, V., Merle, B., Göken, M. & Durst, K., 2013, In: Journal of materials research (JMR). 28, p. 1177-1188

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    An in-situ high-energy X-ray diffraction study on the hot-deformation behavior of a beta-phase containing TiAl alloy

    Schmölzer, T., Liss, K.-D., Kirchlechner, C., Mayer, S., Stark, A., Peel, M. & Clemens, H., 2013, In: Intermetallics. 39, p. 25-33

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Annual report I 1020-N20

    Kiener, D., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  8. Published

    Annual report P 25325-N20

    Kiener, D., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  9. Published

    A testing apparatus for SEM in-situ fatigue testing of small scale specimens and a derived application

    Reiser, J., Maier, B., Guster, C., Gänser, H.-P. & Pippan, R., 2013,

    Proceedings of the ASME 2013 Pressure Vessels & Piping Division Conference

    .     p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Auswirkung der Porenform und der Umformbedingungen auf das Porenschließverhalten

    Grundner, K. T., 2013

    Research output: Thesis › Diploma Thesis

  11. Published

    Bias- and temperature-dependent strain evolution across nanocrystalline TiAlN films studied by X-ray nanodiffraction

    Riedl, A., Todt, J., Daniel, R., Steffenelli, M., Holec, D., Krywka, C., Mitterer, C. & Keckes, J., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  12. Published

    Cross-sectional X-ray nanobeam diffraction analysis of a compositionally graded CrNx thin film

    Bartosik, M., Daniel, R., Mitterer, C., Matko, I., Burghammer, M., Mayrhofer, P. H. & Keckes, J., 2013, In: Thin solid films. 542, p. 1-4

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Detailed Modelling of Delamination Buckling of Thin Film Under Global Tension

    Toth, F., Rammerstorfer, F. G., Cordill, M. & Fischer, F. D., 2013, In: Acta materialia. 61, p. 2425-2433

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Diffusion studies in epitaxial TiN/Cu layers on MgO(001)

    Mühlbacher, M., Sartory, B., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    Diffusive and massive phase transformations in Ti-Al-Nb alloys - Modelling and experiments

    Gamsjäger, E., Liu, Y., Rester, M., Puschnig, P., Draxl, C., Clemens, H., Dehm, G. & Fischer, F. D., 2013, In: Intermetallics. 38, p. 126-138

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Effects of structure and interfaces on fracture toughness of CrN/AlN multilayer coatings

    Schlögl, M., Kirchlechner, C., Paulitsch, J., Keckes, J. & Mayrhofer, P., 2013, In: Scripta materialia. 68, p. 917-920

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Elastoplastic Buckling as Source of Misinterpretation of Micropillar-Tests

    Daum, B., Dehm, G., Clemens, H., Rester, M., Fischer, F. D. & Rammerstorfer, F. G., 2013, In: Acta materialia. 61, p. 4996-5007

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Enhanced fatigue endurance of metallic glasses through a staircase-like fracture mechanism

    Gludovatz, B., Demetriou, M. D., Floyd, M., Hohenwarter, A., Johnson, W. L. & Ritchie, R. O., 2013, In: Proceedings of the National Academy of Sciences of the United States of America (PNAS). 110, p. 18419-18424

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Fabrication and thermo-mechanical behavior of nanoporous copper

    Kreuzeder, M., 2013, 85 p.

    Research output: Thesis › Diploma Thesis

  20. Published

    Fatigue crack growth investigations on ultrafine-grained metals produced by high pressure torsion

    Leitner, T., Hohenwarter, A. & Pippan, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  21. Published

    Fracture of ECAP-deformed iron and the role of extrinsic toughening mechanisms

    Hohenwarter, A. & Pippan, R., 2013, In: Acta materialia. 61, p. 2973-2983

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    High temperature mechanical testing of novel Cu-Nb nanocomposites

    Primorac, M.-M., 2013, 78 p.

    Research output: Thesis › Diploma Thesis

  23. Published

    Influence of AlN layers on mechanical properties and thermal stability of Cr-based nitride coatings

    Schlögl, M., Paulitsch, J., Keckes, J. & Mayrhofer, P. H., 2013, In: Thin solid films. 531, p. 113-118

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Influence of bulk pre-straining on the size effect in nickel compression pillars

    Schneider, A. S., Kiener, D., Yakacki, C. M., Maier, H. J., Gruber, P. A., Tamura, N., Kunz, M., Minor, A. M. & Frick, C. P., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 559, p. 147-158 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Influence of grain shape and orientation on the mechanical properties of high pressure deformed nickel

    Rathmayr, G. B., Hohenwarter, A. & Pippan, R., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 560, p. 224-231

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Influence of morphology and structural size on the fracture behavior of a nanostructured pearlitic steel

    Kammerhofer, C., Hohenwarter, A., Scheriau, S., Brantner, H. P. & Pippan, R., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, p. 190-196

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Insights into the atomic and electronic structure triggered by ordered nitrogen vacancies in CrN

    Zhang, Z., Li, H., Daniel, R., Mitterer, C. & Dehm, G., 2013, In: Physical review : B, Condensed matter and materials physics. 87, p. 0141041-0141049

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    In-situ microcompression experiments on a nanocrystalline pearlitic steel

    Kapp, M., Hohenwarter, A., Kammerhofer, C., Wurster, S. & Pippan, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    In-situ observation of stress-induced stochastic twin boundary motion in off stoichiometric NiMnGa single crystals

    Barabash, R., Kirchlechner, C., Robach, O., Ulrich, O., Micha, J.-S., Sozinov, A. & Barabash, O., 2013, In: Applied physics letters. 103, p. 219091-219095

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Interfacial and inter- diffusion studies of epitaxial TiN/Cu layers on MgO (001) - A comprehensive approach by high resolution TEM and APT

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Keckes, J., Lu, J., Lars, H. & Mitterer, C., 2013.

    Research output: Contribution to conference › Presentation › Research › peer-review

  31. Published

    Near-threshold propagation of mode II and mode III fatigue cracks in ferrite and austenite

    Vojtek, T., Pippan, R., Hohenwarter, A., Holan, L. & Pokluda, J., 2013, In: Acta materialia. 61, p. 4625-4635

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Novel TiAlN nanostructured CVD coatings with superior oxidation resistance

    Keckes, J., Todt, J., Daniel, R., Mitterer, C., Köpf, A., Weißenbacher, R. & Pitonak, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Orientation sensitive in-situ testing of nanostructured pearlitic micropillars in a scanning electron microscope

    Kapp, M., Wurster, S., Hohenwarter, A., Kammerhofer, C. & Pippan, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  34. Published

    Origins of microstructure and stress gradients in nanocrystalline thin films: The role of growth parameters and self-organization

    Daniel, R., Keckes, J., Matko, I., Burghammer, M. & Mitterer, C., 2013, In: Acta materialia. 61, p. 6255-6266

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Oxidation Behaviour of a Novel Nanolamellar Ti0.05Al0.95N Coating

    Todt, J., 2013, 41 p.

    Research output: Thesis › Diploma Thesis

  36. Published

    Revealing local deformation mechanisms in the steady state regime of severely cold rolled copper

    Renk, O., Hohenwarter, A. & Pippan, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    Revealing local deformation mechanisms in the steady state regime of severely cold rolled copper

    Renk, O., Hohenwarter, A. & Pippan, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Self-organized periodic soft-hard nanolamellae in polycrystalline TiAlN thin films

    Keckes, J., Daniel, R., Mitterer, C., Matko, I., Sartory, B., Köpf, A., Weißenbacher, R. & Pitonak, R., 2013, In: Thin solid films. 545, p. 29-32

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    The role of an interlayer in titanium coatings on polyimide

    Cordill, M., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  40. Published

    The TiO2(100)||(0001)Al2O3 interface: A density-functional study

    Popov, M., 2013

    Research output: Thesis › Doctoral Thesis

  41. Published

    Three-dimensional morphology of fracture surfaces generated by modes II and III fatigue loading in ferrite and austenite

    Vojtek, T., Pokluda, J., Hohenwarter, A. & Pippan, R., 2013, In: Engineering Fracture Mechanics. 108, p. 285-293

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Transmission electron microscopy characterization of CrN films on MgO(001)

    Harzer, T. P., Daniel, R., Mitterer, C., Dehm, G. & Zhang, Z. L., 2013, In: Thin solid films. 545, p. 154-160 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Triaxial Residual Stresses in Thermomechanically Rolled Seamless Tubes characterized by High-Energy Synchrotron X-Ray diffraction

    Winter, G., Stefenelli, M., Klarner, J., Staron, P., Fischer, T., Keckes, J. & Buchmayr, B., 2013,

    Proceedings of the2013 ASME Pressure Vessels & Piping Conference

    .     p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Understanding nanoscale plasticity using quantitative in situ TEM

    Kiener, D., 2013

    Research output: Thesis › Habilitation thesis › peer-review

  45. Published

    Untersuchung von alternativen Legierungskonzepten für presshärtende Stähle

    Arnold, E., 2013

    Research output: Thesis › Diploma Thesis

  46. Published

    X-ray analysis of residual stress gradients in TiN coatings by a Laplace space approach and cross-sectional nanodiffraction: a critical comparison

    Steffenelli, M., Todt, J., Riedl, A., Ecker, W., Müller, T., Daniel, R., Burghammer, M. & Keckes, J., 2013, In: Journal of applied crystallography. 46, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  47. 2012
  48. E-pub ahead of print

    Impact of hydrogen-assisted heat treatments on microstructure and transformation path in a Ni-rich NiTi shape memory alloy

    Kuběnová, M., Zálešák, J., Čermák, J. & Dlouhý, A., 13 Aug 2012, (E-pub ahead of print) In: Journal of alloys and compounds. 577.2013, Supplement 1, p. S287-S290 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    On the stability of the Higher Manganese Silicides

    Allam, A., Nunes, C. A., Zalesak, J. & Record, M. C., 25 Jan 2012, In: Journal of alloys and compounds. 512, 1, p. 278-281 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    A comprehensive study on the damage tolerance of ultrafine-grained copper

    Hohenwarter, A. & Pippan, R., 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 540, p. 89-96

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Advanced nanomechanics in the TEM: effects of thermal annealing on FIB prepared Cu samples

    Kiener, D., Zhang, Z., Sturm, S., Cazottes, S., Imrich, P. J., Kirchlechner, C. & Dehm, G., 2012, In: Philosophical magazine. 92, p. 3269-3289

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    All-cellulose composites prepared from flax and lyocell fibres compared to epoxy–matrix composites

    Gindl-Altmutter, W., Keckes, J., Plackner, J., Liebner, F., Englund, K. & Laborie, M.-P., 2012, In: Composites science and technology. p. 1304-1309

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    A new SEM in-situ fatigue testing apparatus and its application for evaluation of fatigue damage at higher load cycles

    Reiser, J., Maier, B., Gänser, H.-P., Guster, C. & Pippan, R., 2012, Proceedings of ECF 19. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Annual report I 1020-N20

    Kiener, D., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  55. Published

    A novel approach for determining fracture toughness of hard coatings on the micrometer scale

    Riedl, A., Daniel, R., Steffenelli, M., Schöberl, T., Kolednik, O., Mitterer, C. & Keckes, J., 2012, In: Scripta materialia. 67, p. 708-711

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Application of small-scale testing for investigation of ion-beam-irradiated materials

    Kiener, D., Minor, A. M., Anderoglu, O., Wang, Y., Maloy, S. A. & Hosemann, P., 2012, In: Journal of materials research (JMR). 27, p. 2724-2736

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Atomic-resolution electron microscopy: going beyond imaging

    Zhang, Z., 2012

    Research output: Thesis › Habilitation thesis › peer-review

  58. Published

    A two-dimensional waveguide beam for X-ray nanodiffraction

    Krywka, C., Neubauer, H., Priebe, M., Salditt, T., Keckes, J., Buffet, A., Roth, S. V., Doehrmann, R. & Mueller, M., 2012, In: Journal of applied crystallography. 45.20212 , Part 1, p. 85-92 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Biomimetik design for cell-contacting surfaces-The topographical influences on cell-biomaterial interaction and plasma-based fabrication methods for self-adapted nanostructures

    Lackner, J. M., Waldhauser, W., Schmied, F., Teichert, C., Keckes, J. & Kreith, J., 2012, Nanostructural materials for implants and cardiovascular biomedical devices. p. 33-66

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  60. Published

    Bis ins kleinste Atom

    Kiener, D., 2012, In: Thema. 11, 15.01.2012, p. 40-41

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Bruchmechanische Untersuchungen an vier TNM Gefügen

    Leitner, T., 2012

    Research output: Thesis › Diploma Thesis

  62. Published

    Characterization of CrN films on MgO by Transmission Electron Microscopy

    Kormout, K., 2012, 64 p.

    Research output: Thesis › Diploma Thesis › peer-review

  63. Published

    Connecting in situ TEM mechanical testing with bulk properties of irradiated materials

    Minor, A. M., Hosemann, P. & Kiener, D., 2012, In: Microscopy and microanalysis. 18, p. 1344-1345

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Crystal orientation changes: a comparison of crystal plasticity finite element study and experimental results

    Rehrl, C., Völker, B., Kleber, S., Antretter, T. & Pippan, R., 2012, In: Acta materialia. p. 2379-2386

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Ermüdungseigenschaften und Mikrostrukturevolution von mikro- und nanokristallinen Mikrobiegeproben

    Kremmer, T., 2012

    Research output: Thesis › Diploma Thesis

  66. Published

    Expected and unexpected plastic behavior at the micron scale: An in situ μLaue tensile study

    Kirchlechner, C., Imrich, P., Grosinger, W., Kapp, M., Keckes, J., Micha, J.-S., Ulrich, O., Thomas, O., Labat, S., Motz, C. & Dehm, G., 2012, In: Acta materialia. 60, p. 1252-1258

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Extraordinary transmission in metal hole array - photonic crystal hybrid structures

    Glushko, O., Brunner, R., Meisels, R., Kalchmair, S. & Strasser, G., 2012, In: Optics express. 20, p. 17174-17182

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    First-principles study of the thermodynamic and elastic properties of eutectic Fe-Ti alloys

    Zhu, L.-F., Friák, M., Dick, A., Grabowski, B., Hickel, T., Liot, F., Holec, D., Schlieter, A., Kühn, U., Eckert, J., Ebrahimi, Z., Emmerich, H. & Neugebauer, J., 2012, In: Acta materialia. 60, p. 1594-1602

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Fracture and fatigue of inhomogeneous materials

    Zechner, J., 2012, 167 p.

    Research output: Thesis › Doctoral Thesis

  70. Published

    Fritz Grasenick Preis 2012 an Leobener Materialphysiker: TU Austria

    Kiener, D., 2012

    Research output: Non-textual form › Web publication/site › Transfer

  71. Published

    Fritz-Kohlrausch-Preis für Leobener Materialwissenschafter: TU Austria

    Kiener, D., 2012

    Research output: Non-textual form › Web publication/site › Transfer

  72. Published

    Influence of grain shape and orientation on the mechanical properties of high pressure torsion deformed nickel

    Renk, O., Hohenwarter, A. & Pippan, R., 2012, In: Advanced engineering materials. 11, p. 948-954

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Influence of impurity elements on the nucleation and growth of Si in high purity melt-spun Al–Si-based alloys

    Li, J., Zarif, M. Z., Dehm, G. & Schumacher, P., 2012, In: Philosophical magazine. 92, p. 3789-3805

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Influence of interrupted quenching on artificial aging of Al–Mg–Si alloys

    Pogatscher, S., Antrekowitsch, H., Leitner, H., Pöschmann, D., Zhang, Z. & Uggowitzer, P. J., 2012, In: Acta materialia. 60, p. 4496-4505

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Influence of residual stresses and grain size on the spinodal decomposition of metastable Ti1-xAlxN coatings

    Schalk, N., Mitterer, C., Keckes, J., Penoy, M. & Michotte, C., 2012, In: Surface & coatings technology. 209, p. 190-196

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Influence of texture on the strength and fracture behavior of severely plastically deformed nickel

    Hohenwarter, A., Rathmayr, G. B. & Pippan, R., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  77. Published

    Influencing rolling contact fatigue and wear by different rail grades and contact conditions

    Stock, R. F., 2012, 126 p.

    Research output: Thesis › Doctoral Thesis

  78. Published

    In-situ Electron Microscopy,

    Dehm, G., 2012

    Research output: Book/Report › Book › Research

  79. Published

    In-situ fracture study of thin Cu films on polyimide substrate

    Marx, V. M., Kirchlechner, C., Zizak, I., Dehm, G. & Cordill, M. J., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  80. Published

    In Situ Study of Gamma-TiAl Lamellae Formation in Supersaturated alpha 2-Ti3Al Grains

    Cha, L., Schmölzer, T., Zhang, Z., Mayer, S., Clemens, H., Staron, P. & Dehm, G., 2012, In: Advanced engineering materials. 14, p. 299-303

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    In-situ TEM Straining Experiments: Recent Progress in Stages and Small-Scale Mechanics

    Dehm, G., Legros, M. & Kiener, D., 2012, In-situ Electron Microscopy. p. 227-254

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  82. Published

    Investigation of reversible plasticity in a micron-sized, single crystalline copper bending beam by X-ray µLaue diffraction

    Kirchlechner, C., Grosinger, W., Kapp, M. W., Imrich, P. J., Micha, J.-S., Ulrich, O., Keckes, J., Dehm, G. & Motz, C., 2012, In: Philosophical magazine. p. 3231-3242

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Issues to consider using nano indentation on shallow ion beam irradiated materials

    Hosemann, P., Kiener, D., Wang, Y. & Maloy, S. A., 2012, In: Journal of nuclear materials. 425, p. 136-139

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Lateral gradients of phases, residual stress and hardness in a laser heated Ti0.52Al0.48N coating on hard metal

    Bartosik, M., Daniel, R., Zhang, Z., Deluca, M., Ecker, W., Steffenelli, M., Klaus, M., Genzel, C., Stefenelli, M., Mitterer, C. & Keckes, J., 2012, In: Surface & coatings technology. 206, p. 4502-4510 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Leobener Forscher ganz vorne dabei

    Kiener, D., 2012, In: Kleine Zeitung / Steiermark - Leoben und rund um den Erzberg. 24.02.2012, p. 21-21

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Leobener Wissenschafter als Top Cited Author 2011 ausgezeichnet: TU Austria

    Kiener, D., 2012

    Research output: Non-textual form › Web publication/site › Transfer

  87. Published

    Leobener Wissenschafter als Top Cited Author 2011 ausgezeichnet: Leobennews

    Kiener, D., 2012

    Research output: Non-textual form › Web publication/site › Transfer

  88. Published

    Lokale Verformungsanalyse an einem TRIP-Stahl

    Kasberger, R., 2012

    Research output: Thesis › Diploma Thesis

  89. Published

    Lokale Verformungsanalyse an einkristallinen Cu- und Au-Mikrozugproben mit Hilfe von Bildkorrelationsverfahren und AFM-Messungen

    Konetschnik, R., 2012

    Research output: Thesis › Diploma Thesis

  90. Published

    Mechanical behaviour of ultrafine-grained nickel: The role of purity and strain path

    Rathmayr, G. B., 2012, 133 p.

    Research output: Thesis › Doctoral Thesis

  91. Published

    Mechanical Testing of Micron and Sub-Micron Samples Using In-Situ Electron Microscopy

    Kiener, D., 2012, DETERMINATION OF MECHANICAL PROPERTIES OF MATERIALS BY SMALL PUNCH AND OTHER MINIATURE TESTING TECHNIQUES, 2ND INTERNATIONAL CONFERENCE SSTT. p. 239-244

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  92. Published

    Microstructure evolution and grain refinement processes in the intermetallic TiAl-Mo alloy system

    Rashkova, B., Sailer, C., Clemens, H., Schöberl, T., Spiradek-Hahn, K., Brabetz, M., Dehm, G. & Mayer, S., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  93. Published

    Montanist ausgezeichnet

    Kiener, D., 2012, In: Kleine Zeitung / Steiermark - Leoben und rund um den Erzberg. p. 25-25

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Near threshold fatigue crack propgation under mixed-mode II+III in armco iron

    Vojtek, T., Pokluda, J., Sandera, P., Hornikova, J., Slamecka, K., Hohenwarter, A. & Pippan, R., 2012, Proceedings of the European Conference on Fracture 19. p. 106-112

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    NEW APPROACH FOR TESTING AND MODELLING OF FATIGUE BEHAVIOUR

    Reiser, J., Maier, B., Gänser, H.-P., Guster, C. & Pippan, R., 2012, Proceedings of World Congress on Computational Mechanics. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Non-homogeneous structural and mechanical properties of nanocrystalline thin films characterized by advanced X-ray diffraction techniques

    Bartosik, M., 2012, 134 p.

    Research output: Thesis › Doctoral Thesis

  97. Published

    On Configurational Forces at Boundaries in Fracture Mechanics

    Fischer, F. D., Simha, N. K., Predan, J., Schöngrundner, R. & Kolednik, O., 2012, In: International Journal of Fracture. 174, p. 61-74

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    On the reversibility of dislocation pile-ups at the micron scale: a µLaue diffraction study

    Kapp, M., 2012, 78 p.

    Research output: Thesis › Diploma Thesis › peer-review

  99. Published

    Preis für Forscher

    Kiener, D., 2012, In: Kleine Zeitung / Steiermark - Leoben und rund um den Erzberg. 24.02.2012, p. 14-14

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Quantitative Approaches for in situ SEM and TEM Deformation Studies

    Dehm, G., Kiener, D., Motz, C., Pippan, R. & Smolka, M., 2012, In: Microscopy and microanalysis. 18, p. 736-737

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Quantum mechanically guided design of Co43Fe20Ta5.5X31.5 (X=B, Si, P, S) metallic glasses

    Hostert, C., Music, D., Bednarcik, J., Keckes, J. & Schneider, J. M., 2012, In: Journal of physics (Condensed matter). p. 175402-175411

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Sample Preparation by Metallography and Focused Ion Beam for Nanomechanical Testing

    Moser, G., Felber, H., Rashkova, B., Imrich, P. J., Kirchlechner, C., Grosinger, W., Motz, C., Dehm, G. & Kiener, D., 2012, In: Practical metallography = Praktische Metallographie. 49, p. 343-355

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...9 10 11 12 13 14 15 16 ...20 Next
View graph of relations

Contact information

Jahnstrasse 12/I, 8700 Leoben
  • Main phone number: +43 3842 804 112