Chair of Ferrous Metallurgy (220)
Organisational unit: Chair
Research output
- 2011
- Published
Investigation of the implications of the current conductive mold technology with respect to the internal and surface quality of ESR ingots
Holzgruber, H., Scheriau, A., Knabl, M., Kubin, M., Korp, J. & Pierer, R., 2011, INTERNATIONAL SYMPOSIUM ON LIQUID METAL PROCESSING AND CASTING. p. 57-64Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Measuring mechanical behavior of steel during solidification: Modeling the SSCC test
Rowan, M., Thomas, B., Pierer, R. & Bernhard, C., 2011, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 42, 4, p. 837-851Research output: Contribution to journal › Article › Research › peer-review
- Published
Modification of non-metallic inclusions in the ESR process by steel-slag interaction: Thermodynamic and experimental considerations
Michelic, S., Tanzer, R., Schützenhöfer, W. & Bernhard, C., 2011, Proceedings of the 2011 International Symposium on Liquid Metal Processing and Casting. p. 81-88Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Modification of Oxide Inclusions due to Steel-Slag Interactions with Special Focus on the Electroslag Remelting Process
Michelic, S. K., 2011, 174 p.Research output: Thesis › Doctoral Thesis
- Published
Möglichkeiten und Grenzen der experimentellen Bestimmung des Schrumpf- und Kontraktionsverhaltes bei Stahl mit Hilfe des SSCC Versuches
Schneller, F., 2011Research output: Thesis › Master's Thesis
- Published
On the Representativeness of Automated SEM/EDS Analyses for Inclusion Characterisation with Special Regard to the Measured Sample Area
Michelic, S., Wieser, G. & Bernhard, C., 2011, In: ISIJ international. 51, p. 769-775Research output: Contribution to journal › Article › Research › peer-review
- Published
Pool Profile Formation and Homogeneity of Remelted Ingots using the Electroslag Current Conductive Mold Technology
Kubin, M., Korp, J. & Pierer, R., 2011.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Recent status of fluidized bed technologies for producing iron input materials for steelmaking
Schenk, J., 2011, In: Particuology. 9, 1, p. 14-23Research output: Contribution to journal › Article › Research › peer-review
- Published
Reduction Technologies for the Recycling of Iron and Steel Residues
Schenk, J., 2011, 3. Seminar Networking between Zinc and Steel. p. 63-76Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
The formation of hot tear segregations in the continuous casting process
Ilie, S., Reisinger, P., Bernhard, C. & Pierer, R., 2011, 3rd Chinese-German Metallurgy Seminar on Fundamentals of Iron and Steelmaking. p. Paper-10Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Thermodynamic and Experimental Study on the Modification of Nonmetallic Inclusions Through the Contact with CaO-Al2O3-MgO Slags
Michelic, S., Bernhard, C. & Hartl, M., 2011, AIST Proceedings 2011. p. 617-626Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Thermodynamic and Kinetic Modelling of the Devan adization Process in the Steelmaking Converter
Lytvynyuk, Y., Schenk, J., Hiebler, M. & Mizelli, H., 2011, 6th European Oxygen Steelmaking Conference 2011 (EOSC 2011). p. 657-664Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Thermodynamische Berechnung des Einflusses des FeOn Gehaltes auf die MgO-Löslichkeit von Pfannenschlacken.
Goriupp, J., 2011.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Thermodynamische Modellierung des quarternären Systems CaO-SiO2-Al2O3-MgO zur Vorhersage der MgO-Sättigung von Pfannenschlacken.
Goriupp, J., 2011.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Thermo-Mechanical Properties of an Fe–Mn–Si–Cr–Ni–VC Shape Memory Alloy with Low Transformation Temperature
Leinenbach, C., Kramer, H., Bernhard, C. & Eifler, D., 2011, In: Advanced engineering materials.Research output: Contribution to journal › Article › Research › peer-review
- Published
Untersuchung des Gießverhaltens peritektischer Stähle mit Hilfe des Kokillenmonitors
Panhofer, H., 2011, 114 p.Research output: Thesis › Master's Thesis
- Published
Usage of FINEX® LRI (low reduced iron) in the blast furnace
Thaler, C., Tappeiner, T., Schenk, J., Kepplinger, W., Plaul, J. F. & Schuster, S., 2011, 2nd International Conference and Exhibition on Clean Technologies in the Steel Industry. p. 1-12Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Vergleich von Analyseverfahren zur Bestimmung von Eisenoxiden
Gruber, C., Voller, N., Bäck, E. & Skorianz, M., 2011Research output: Book/Report › Commissioned report › Transfer › peer-review
- 2010
- Published
- Published
Verfahren zur Herstellung von hochfestem, niedrig legiertem Stahl
Arth, G. (Inventor), Bernhard, C. (Inventor), Eckerstorfer, G. (Inventor), Hohenbichler, G. (Inventor) & Linzer, B. (Inventor), 2 Dec 2010, Patent No. 10193403.2-2122Research output: Patent
- Published
Verfahren und Vorrichtung zum Abtrennen von partikelförmigen Feststoffen von einem Gasstrom
Schenk, J. (Inventor), Eder, T. (Inventor), Millner, R. (Inventor) & Rein, N. (Inventor), 15 Nov 2010, Patent No. A 1659/2008Research output: Patent
- Published
Verfahren zur Herstellung von Agglomeraten
Schenk, J. (Inventor), Böhm, C. (Inventor), Heckmann, H. (Inventor) & Stiasny, H. H. (Inventor), 15 Sept 2010, Patent No. A 1419/2008Research output: Patent
- Published
Instalacion y procedimiento para la depuracion de gas de proceso para una instalacion de fusion por reduccion, que comprende una instalacion conjunta para la separacion por goteo en la que desembocan tanto el primer sistema de lavado que conduce el gas de alto horno como tambien el segundo sistema de lavado que conduce el gas generador.
Martin, S. (Inventor), Kurt, W. (Inventor), Johann, W. (Inventor), Sin-Myoung, K. (Inventor) & Johannes, L. S. (Inventor), 4 Jun 2010, IPC No. C21B 13/ 14 A I, Patent No. CL2009001489, Priority date 27 Jun 2008, Priority No. AT20080001026Research output: Patent
- Published
Metodo y planta para obtener arrabio o productos de acero liquido que comprende fundir una primera porcion de insumos ferrosos parcilamente reducidos en un reactor de fusion, con aporte de portadores de carbono y gas que contiene oxigeno, y alimentar una segunda porcion de insumos ferrosos parcialmente reducidos a un reactor a un reactor de reduccion de fusion.
Christian, B. (Inventor), Jan-Friedemann, P. (Inventor) & Johannes, L. S. (Inventor), 4 Jun 2010, IPC No. F27B 1/ 00 A I, Patent No. CL2009001362, Priority date 6 Jun 2008, Priority No. AT20080000920Research output: Patent
- Published
Procedimiento para el analisis microscopico de sustancias añadidas para un proceso de transformacion, para producir productos metalurgicos empleando gases de proceso, en una o varias etapas, con ondas electro-magneticas polarizadas o no polarizadas, o microscopia electronica, empleando en el analisis multietapas luz polarizada en direcciones diferentes.
Johannes, S. (Inventor), Kurt, W. (Inventor), Harald, F. (Inventor), Heinrich, M. (Inventor), Stefan, S. (Inventor), Bernhard, S. (Inventor) & Franz, W. (Inventor), 4 Jun 2010, IPC No. G05D 21/ 00 A I, Patent No. CL2009001374, Priority date 6 Jun 2008, Priority No. AT20080000921Research output: Patent
- Published
Nozzle for injecting gas containing oxygen into a pig iron device having an injector insertion pipe
Johann, W. (Inventor), Stefan, L. (Inventor), Marinko, L.-N. (Inventor), Georg, A. (Inventor), Franz, B. (Inventor), Jan-Friedemann, P. (Inventor), Johannes, L. S. (Inventor), Martin, S. (Inventor), Thomas, S. (Inventor), Bogdan, V. (Inventor) & Kurt, W. (Inventor), 3 Jun 2010, IPC No. F27D 3/ 16 A I, Patent No. AU2009319139, Priority date 5 Nov 2009, Priority No. WO2009EP64685Research output: Patent
- Published
Verfahren zur Steuerung eines Transformationsverfahrens
Schenk, J. (Inventor), Fischer, H. (Inventor), Mali, H. (Inventor), Schuster, S. (Inventor), Spuida, B. H. (Inventor), Wieder, K. (Inventor) & Winter, F. (Inventor), 15 May 2010, Patent No. A 921/2008Research output: Patent
- Published
Method and device for operating a smelting reduction process
Robert, M. (Inventor), Schenk, J. L. (Inventor) & Kurt, W. (Inventor), 29 Apr 2010, IPC No. F02C 6/ 00 A I, Patent No. AU2009306565, Priority date 29 Sept 2009, Priority No. WO2009EP62607Research output: Patent
- Published
Method and device for separating particulate solids from a gas flow
Eder, T. (Inventor), Robert, M. (Inventor), Rein, N. (Inventor) & Johannes, L. S. (Inventor), 29 Apr 2010, IPC No. B01D 50/ 00 A I, Patent No. AU2009306564, Priority date 29 Sept 2009, Priority No. WO2009EP62605Research output: Patent
- Published
Process for producing agglomerates of finely particulate iron carriers
Heckmann, H. (Inventor), Christian, B. (Inventor), Johannes, L. S. (Inventor) & Stiasny, H. H. (Inventor), 18 Mar 2010, IPC No. C22B 5/ 14 A I, Patent No. AU2009291046, Priority date 17 Aug 2009, Priority No. WO2009EP60609Research output: Patent
- Published
Prozessgas-Reinigungseinrichtung für eine Schmelzreduktionsanlage zur Gewinnung von Roheisen
Schenk, J. (Inventor), Kang, S. M. (Inventor), Schmidt, M. (Inventor) & Wurm, J. (Inventor), 15 Mar 2010, Patent No. A 1026/2008Research output: Patent
- Published
Verfahren und Vorrichtung zur Herstellung von Roheisen und flüssigen Stahlvorprodukten
Schenk, J. (Inventor), Böhm, C. (Inventor) & Jan-Friedemann, P. (Inventor), 15 Mar 2010, Patent No. A 920/2008Research output: Patent
- Published
Experimental and morphological investigations of the reduction from coarse hematite to magnetite and wustite under fluidized bed conditions
Weiss, B., Sturn, J., Voglsam, S., Strobl, S., Mali, H., Winter, F. & Schenk, J., 1 Feb 2010, In: Steel research international. 81, 2, p. 93-99 7 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Method and device for producing molten material
Hauzenberger, F. (Inventor), Rein, N. (Inventor), Wieder, K. (Inventor), Schenk, J. (Inventor), Vuletic, B. (Inventor), Schmidt, M. (Inventor), Wurm, J. (Inventor) & Millner, R. (Inventor), 27 Jan 2010, IPC No. C21B 13/ 14 A I, Patent No. CN101636510, Priority date 1 Oct 2007, Priority No. WO2007EP08515Research output: Patent
- Published
ARVEDI ESP – REAL ENDLESS STRIP PRODUCTION: THE NEXT GENERATION OF PRODUCING HIGH-VALUE STEELS STARTED UP
Bernhard, C., Bragin, S., Gelder, S., Linzer, B., Jungbauer, A., Venturini, R. & Guindani, A., 2010, ARVEDI ESP – REAL ENDLESS STRIP PRODUCTION: THE NEXT GENERATION OF PRODUCING HIGH-VALUE STEELS STARTED UP. p. ---Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Automatisierte REM/EDX Partikelanalyse zur Bestimmung von nichtmetallischen Einschlüssen in Stahlproben - Ringversuch zur Vergleichbarkeit der Ergebnisse an unterschiedlichen Messsystemen
Reischl, M., Martinez, C., Aigner, S., Lederhaas, B. & Michelic, S., 2010, Automatisierte REM/EDX Partikelanalyse zur Bestimmung von nichtmetallischen Einschlüssen in Stahlproben - Ringversuch zur Vergleichbarkeit der Ergebnisse an unterschiedlichen Messsystemen. Werkstoff-Informationsges., p. 365-370Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Bestimmung des Eigenschaftsspektrums beschleunigt erstarrter Proben von HSLA Stählen
Arth, G., 2010.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Bilanzmodell des FINEX®-Prozesses zur Abschätzung von CO2-Emissionen
Thaler, C., Schenk, J. & Plaul, J. F., 2010, DepoTech 2010. p. 649-653Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Bilanzmodell des FINEX®-Prozesses zur Abschätzung von CO2-Emissionen
Thaler, C., Plaul, J. F. & Schenk, J., 2010.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Ca-Behandlung bei Si-freien Stahlgüten
Ramaseder, D. R., 2010Research output: Thesis › Master's Thesis
- Published
Characterisation of raw materials for use in the FINEX process
Karasangabo, A., Skorianz, M. & Thaler, C., 2010Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Charakterisierung der Erstarrungsstruktur von Stranggussbrammen
Hadler, M., 2010Research output: Thesis › Master's Thesis
- Published
Charakterisierung peritektischer Stähle: DTA/DSC-Simulation und Signalkorrektur, Legierungsinstabilität bei DTA-Messungen, DSC-Aufrüstung und Potential von DSC-Messungen
Presoly, P., 2010Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Charakterisierung peritektischer Stähle: Ergebnisse der Dilatometer Methodenentwicklung, Strategie – Legierungssysteme von Interesse & Thermodynamik – Al Variation.
Presoly, P., 2010Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Charakterisierung peritektischer Stähle: Ergebnisse der DTA-Methodenentwicklung, Schwerpunkt: Temperaturkalibrierung, DTA-Signale von Legierungen links/rechs von cA/cB, Probenherstellung mittels HFU
Presoly, P., 2010Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Einfluss der Konvertergeometrie auf die Metallurgie des LD Prozesses
Ortner, M., 2010, 121 p.Research output: Thesis › Master's Thesis
- Published
EINFLUSS DER STRECKENENERGIE UND SCHWEISZGESCHWINDIGKEIT AUF DAS ERSTARRUNGSVERHALTEN VON HÖCHSTFESTEN MAG UND MAG-FD NÄHTEN
Vanovsek, W., Strauss, C. & Bernhard, C., 2010, join-ex 2010: Zusatzwerkstoffe und Gase. p. 15-21Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Einfluss von nichtmetallischen Einschlüssen und Ausscheidungen auf die Korrosionsbeständigkeit hoch legierter CrMnN-Austenite
Wöls, M., 2010Research output: Thesis › Master's Thesis
- Published
Experimental characterisation of new peritectic steel grades
Presoly, P. & Pierer, R., 2010.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Experimental simulation of crack formation of steels in the temperature range of second ductility through
Krajewski, P. & Pierer, R., 2010.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Inbetriebnahme einer Druck-Thermogravimetrischen Apparatur und Überprüfung deren Eignung für die Durchführung von Verzunderungs- und Erzreduktionsversuchen
Wundersamer, J., 2010, 87 p.Research output: Thesis › Master's Thesis
- Published
Influence of Auxiliary Fuel Injection to Tuyeres on Flame Temperature and Flooding Limits in the FINEX® Process: A Theoretical Investigation
Schenk, J., Ahn, S.-G. & Thaler, C., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 518-522Research output: Contribution to journal › Article › Research › peer-review
- Published
Influence of bottom purging on the metallurgical results and the BOF process
Kollmann, T., 2010, 149 p.Research output: Thesis › Master's Thesis
- Published
Investigation of the Expected Advantages with Respect to the Electroslag Current Conductive Mold Technology
Kubin, M., 2010Research output: Thesis › Master's Thesis
- Published
Kinetics and Control of Scaling for Reduced Surface Decarburization of Spring Steels
Anghelina, D., Kienreich, R., Zamberger, S., Zamberger, J., Kozeschnik, E. & Schneider, R., 2010, In: Metalurgia international. XV, p. 5-8Research output: Contribution to journal › Article › Research › peer-review
- Published
Kokillenmetallurgie des konventionellen Brammenstranggießens von Stahl
Xia, G., 2010Research output: Thesis › Habilitation thesis › peer-review
- Published
Kombinierter Einsatz analytischer und statistischer Methoden zur quantitativen und qualitativen Bestimmung des Reinheitsgrads von Stählen
Michelic, S., Hartl, M., Wieser, G. & Bernhard, C., 2010, Kombinierter Einsatz analytischer und statistischer Methoden zur quantitativen und qualitativen Bestimmung des Reinheitsgrads von Stählen. Werkstoff-Informationsges., p. 359-364Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
- Published
Linking of Computer Assisted Thermodynamics with Automated SEM/EDS Measurements for the Characterization of Non-Metallic Inclusions in Steel
Wiener, J., Wieser, G. & Schenk, J., 2010.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Metallurgische Einflüsse auf die Umformbarkeit von Stählen
Buchmayr, B. & Bernhard, C., 2010, XXIX. Verformungskundliches Kolloquium. p. 5-11Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Modelling Solidification Microstructure and Microsegregation in Multicomponent Alloys
Michelic, S. C., 2010Research output: Thesis › Doctoral Thesis
- Published
Optimierung der Gießparameter für niedrig- und hochlegierte Stähle an einer Brammenstranggießanlage
Fleischl, M., 2010Research output: Thesis › Master's Thesis
- Published
Polydimensional modelling of dendritic growth and microsegregation in multicomponent alloys
Michelic, S., Thuswaldner, J. & Bernhard, C., 2010, In: Acta materialia. 58, p. 2738-2751Research output: Contribution to journal › Article › Research › peer-review
- Published
Research and Engineering Work for Enhancement of Competitiveness of FINEX® Technology - Phase 1
Thaler, C., 2010Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Sekundärmetallurgische Aspekte der Herstellung hoch manganhaltiger Stähle
Wiener, J., 2010, 193 p.Research output: Thesis › Doctoral Thesis
- Published
The Nature of Internal Defects in Continuously Cast Steel and their Impact on Final Product Quality
Pierer, R. & Bernhard, C., 2010, AIST Proceedings 2010. p. 193-203Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Thermodynamic Description of the System Steel-Slag-Inclusion for Different Metallurgical Processes using FactSage
Michelic, S., Hartl, M. & Bernhard, C., 2010.Research output: Contribution to conference › Poster › Research › peer-review
- Published
The Working Group "Continuous Casting: Metallurgy and Materials" (M²CC) at Leoben University
Bernhard, C., Pierer, R. & Michelic, S., 2010, Proceedings of the AISTech 2010. p. 01-08Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Über die Bildung von Heißrissseigerungen in Stahl: Vergleichende Untersuchungen an Stranggussbrammen und Laborversuchsproben
Reiter, J., Pierer, R., Ilie, S., Presslinger, H., Fluch, J. & Bernhard, C., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 129-135Research output: Contribution to journal › Article › Research › peer-review
- 2009
- Published
Process gas purification device for a melt reduction system for extracting pig iron
Johann, W. (Inventor), Schmidt, M. (Inventor), Sin-Myoung, K. (Inventor), Johannes, L. S. (Inventor), Schmidt, M. (Inventor) & Kang, S.-M. (Inventor), 30 Dec 2009, IPC No. F27B 1/ 18 A I, Patent No. AU2009262387, Priority date 27 May 2009, Priority No. WO2009EP56417Research output: Patent
- Published
Method of controlling a transformation process
Stefan, S. (Inventor), Spuida, B. H. (Inventor), Wieder, K. (Inventor), Johannes, L. S. (Inventor), Mali, H. R. (Inventor), Kurt, W. (Inventor), Winter, F. (Inventor) & Fischer, H. (Inventor), 10 Dec 2009, IPC No. C21B 5/ 00 A I, Patent No. AU2009254074, Priority date 7 May 2009, Priority No. WO2009EP55545Research output: Patent
- Published
Process and device for producing pig iron or liquid steel precursors
Schenk, J. L. (Inventor), Jan-Friedemann, P. (Inventor) & Christian, B. (Inventor), 10 Dec 2009, IPC No. C21B 13/ 00 A I, Patent No. AU2009254062, Priority date 27 Apr 2009, Priority No. WO2009EP55047Research output: Patent
- Published
Obituary for Prof. Wilfried Krieger
Schenk, J., Dec 2009, In: Steel research international. 80, 12, p. 866-866Research output: Contribution to journal › Article › Research › peer-review
- Published
Method and device for producing liquid pig iron or liquid steel precursor products
Georg, A. (Inventor), Wieder, K. (Inventor), Schenk, J. L. (Inventor), Hado, H. (Inventor), Martin, S. (Inventor), Wurm, J. (Inventor), Hado, H. (Inventor), Eder, T. (Inventor), Robert, M. (Inventor) & Johann, W. (Inventor), 24 Sept 2009, IPC No. F27D 17/ 00 A I, Patent No. AU2009226806, Priority date 30 Jan 2009, Priority No. WO2009EP51058Research output: Patent
- Published
Method and device for producing molten material
Hauzenberger, F. (Inventor), Millner, R. (Inventor), Rein, N. (Inventor), Schenk, J. (Inventor), Schmidt, M. (Inventor), Vuletic, B. (Inventor), Wieder, K. (Inventor) & Wurm, J. (Inventor), 9 Sept 2009, IPC No. C21B 13/ 00 A I, Patent No. CN101528948, Priority date 13 Oct 2006, Priority No. DE20061048601Research output: Patent
- Published
VERFAHREN UND VORRICHTUNG ZUR HERSTELLUNG VON GESCHMOLZENEM MATERIAL
Schenk, J. (Inventor), Hauzenberger, F. (Inventor), Millner, R. (Inventor), Rein, N. (Inventor), Schmidt, M. (Inventor), Vuletic, B. (Inventor), Wieder, K. (Inventor) & Wurm, J. (Inventor), 29 Jul 2009, Patent No. 07818595.6Research output: Patent
- Published
METHOD AND DEVICE FOR PRODUCING MOLTEN MATERIAL.
Bogdan, V. (Inventor), Kurt, W. (Inventor), Johann, W. (Inventor), Franz, H. (Inventor), Robert, M. (Inventor), Norbert, R. (Inventor), Martin, S. (Inventor) & Johannes, L. S. (Inventor), 22 Apr 2009, IPC No. C21B 13/ 14 A I, Patent No. MX2009003725, Priority date 1 Oct 2007, Priority No. WO2007EP08514Research output: Patent
- Published
METHOD AND DEVICE FOR PRODUCING MOLTEN MATERIAL.
Bogdan, V. (Inventor), Kurt, W. (Inventor), Johann, W. (Inventor), Franz, H. (Inventor), Robert, M. (Inventor), Norbert, R. (Inventor), Martin, S. (Inventor) & Johannes, L. S. (Inventor), 22 Apr 2009, IPC No. C21B 13/ 00 A I, Patent No. MX2009003732, Priority date 1 Oct 2007, Priority No. WO2007EP08515Research output: Patent
- Published
Empirical reduction diagrams for reduction of iron ores with H2 and CO gas mixtures considering non-stoichiometries of oxide phases
Weiss, B., Sturn, J., Winter, F. & Schenk, J. L., Apr 2009, In: Ironmaking and steelmaking. 36.2009, 3, p. 212-216 5 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Evaluation of the Limiting Regime in Iron Ore Fines Reduction with H2-Rich Gases in Fluidized Beds: Fe2O3 to Fe3O4
Sturn, J., Voglsam, S., Weiss, B., Schenk, J. & Winter, F., 25 Feb 2009, In: Chemical Engineering & Technology. 32.2009, 3, p. 392-397 6 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Fluidized-bed technology for the production of iron products for steelmaking
Plaul, F. J., Böhm, C. & Schenk, J. L., 1 Feb 2009, In: Journal of the Southern African Institute of Mining and Metallurgy. 109, 2, p. 121-128 8 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Method and device for producing metals and/or metals initial products
Schmidt, M. (Inventor), Schenk, J. (Inventor), Hauzenberger, F. (Inventor), Stockinger, J. (Inventor) & Wurm, J. (Inventor), 28 Jan 2009, IPC No. F27D 3/ 00 A I, Patent No. ZA200705780, Priority date 23 Dec 2004, Priority No. AT20040002168Research output: Patent
- Published
processo e aparelho para produzir metais e/ou produtos metÁlicos primÁrios
Franz, H. (Inventor), Johannes, S. (Inventor), Martin, S. (Inventor), Josef, S. (Inventor) & Johann, W. (Inventor), 20 Jan 2009, IPC No. F27D 3/ 00 A I, Patent No. BRPI0519403, Priority date 6 Dec 2005, Priority No. WO2005EP13042Research output: Patent
- Published
Application of cyclic steam stimulation by horizontal wells in iranian heavy oil reservoirs
Razavi, S. D. & Kharrat, R., 2009, In: Scientia Iranica. 16, 2 C, p. 125-139 15 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
AS2A Software - A new tool for Automatic Solidification Structure Analysis
Griesser, S., O'Leary, P., Stangl, S. & Pierer, R., 2009.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Automatic Determination of Primary Grain Size using Dendrites Orientation in Metallurgical Micrographs
Griesser, S., O'Leary, P. & Pierer, R., 2009, Quality Control by Artificial Vision. p. 1-2Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Bestimmung der Fließeigenschaften von Schüttgütern
Ellersdorfer, M. & Thaler, C., 2009, Tagungsband zum 5. Minisymposium Verfahrenstechnik an der TU Wien. p. 103-110Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Bestimmung des Eigenschaftspektrums von beschleunigt erstarrten Proben aus HSLA-Stählen
Arth, G., 2009Research output: Thesis › Master's Thesis
- Published
Characterisation of phase transformation and damage during the solidification of steel
Presoly, P. & Pierer, R., 2009.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Charakterisierung Heißrissbildung
Pierer, R., 2009.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Charakterisierung peritektischer Stähle: Herstellung der Modelllegierungen, Ergebnisse der Dilatometer Versuche, DTA Entwicklungsarbeit & Weiterentwicklung des SSCC-Versuches.
Presoly, P., 2009Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Charakterisierung peritektischer Stähle: Vorstellung des Versuchsprogramms, Modelllegierungen, thermodynamische Berechnungen, theoretische Beschreibung der publizierten Reaktionsmechanismen.
Presoly, P., 2009Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Der Hochofen am Pyhrnbach in Liezen-im 19. Jahrhundert ein Versuchsaggregat für die Geologen
Presslinger, H., 2009, In: Da schau her. p. 15-18Research output: Contribution to journal › Article › Research › peer-review
- Published
Determination of Primary Grain Boundaries in Metallurgical Micrographs via Discontinuities in the Dendrite Orientation
Griesser, S., O'Leary, P. & Pierer, R., 2009, In: Journal of electronic imaging.Research output: Contribution to journal › Article › Research › peer-review
- Published
Development of a digital image processing software to evaluate the solidification structure in steel
Griesser, S., 2009Research output: Thesis › Master's Thesis
- Published
Die Stranggießforschung am Lehrstuhl für Metallurgie: Entwicklung, Status und Ausblick
Bernhard, C., 2009, In: Berg- und hüttenmännische Monatshefte : BHM. 154, p. 20-26Research output: Contribution to journal › Article › Research › peer-review
- Published
Elektrolytische Extraktion von nichtmetallischen Einschlüssen
Hartl, M., 2009.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Erstarrung peritektischer Stähle
Presoly, P., 2009.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Experimental Simulation of the Solidification of Steel at Higher Cooling Rate
Linzer, B., Hohenbichler, G., Bragin, S., Arth, G. & Bernhard, C., 2009, 3rd International Conference on Simulation and Modelling of Metallurgical Processes in Steelmaking (Steelsim 2009). p. Paper -CC17Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Experimental Simulation of the Solidification of Steel at Higher Cooling Rates
Linzer, B., Hohenbichler, G., Bragin, S., Arth, G. & Bernhard, C., 2009, In: Berg- und hüttenmännische Monatshefte : BHM. 154, p. 498-503Research output: Contribution to journal › Article › Research › peer-review
