Chair of Ferrous Metallurgy (220)

Organisational unit: Chair

201 - 300 out of 1,066Page size: 100

Research output

  1. 2021
  2. Published

    Simulation of the reactions in the ladle during the BOF steel tapping

    You, D., Bernhard, C., Mayer, P., Fasching, J., Kloesch, G., Rössler, R. & Ammer, R., 12 Sept 2021.

    Research output: Contribution to conference › Presentation › Research › peer-review

  3. Published

    Potential and limitations of direct austenite grain growth measurement by means of HT-LSCM

    Fuchs, N. & Bernhard, C., Sept 2021, In: Materials Today Communications. 28.2021, September, 12 p., 102468.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Influence of Slag Viscosity and Composition on the Inclusion Content in Steel

    You, D., Bernhard, C., Mayerhofer, A. & Michelic, S. K., 21 Aug 2021, In: ISIJ international. 61.2021, 12, p. 2991-2997 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Simulation of the Refining Process of Ultra-Low Carbon (ULC) Steel

    You, D., Bernhard, C., Viertauer, A. & Linzer, B., 30 Jul 2021, In: Crystals. 11.2021, 8, 13 p., 893.

    Research output: Contribution to journal › Article › Research › peer-review

  6. E-pub ahead of print

    Experimental determination of the MnO activity coefficient in high-manganese slags using the chemical equilibrium method

    Cheremisina, E., Gao, X., Ueda, S., Kitamura, S. Y., Yamashina, R. & Schenk, J., 26 Jul 2021, (E-pub ahead of print) In: Metals. 11.2021, 8, 13 p., 1190.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    An Assessment of Analytical Liquidus Equations for Fe-C-Si-Mn-Al-P-Alloyed Steels Using DSC/DTA Techniques

    Bernhard, M. C., Presoly, P., Bernhard, C., Hahn, S. & Ilie, S., 29 Jun 2021, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52.2021, 5, p. 2821-2830 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Effect of Prior Oxidation on the Reduction Behavior of Magnetite-Based Iron Ore During Hydrogen-Induced Fluidized Bed Reduction

    Zheng, H., Spreitzer, D., Wolfinger, T., Schenk, J. & Xu, R., 1 Jun 2021, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52.2021, 4, p. 1955-1971 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Modeling of the BOF Tapping Process: The Reactions in the Ladle

    You, D., Bernhard, C., Mayer, P., Fasching, J., Kloesch, G., Rössler, R. & Ammer, R., Jun 2021, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52.2021, 3, p. 1854-1865 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. E-pub ahead of print

    Measurements methodologies for basic oxygen furnace cold modeling

    Gonçalves, F., Ribeiro, M. A., Correa, R., Silva, R., Braga, B., Maia, B. T., Tavares, R. P., De Carvalho, D. A. G. & Schenk, J., 4 May 2021, (E-pub ahead of print) In: Journal of Materials Research and Technology. 13.2021, July-August, p. 834-856 23 p.

    Research output: Contribution to journal › Review article › peer-review

  11. E-pub ahead of print

    Review on the Oxidation Behaviors and Kinetics of Magnetite in Particle Scale

    Zheng, H., Schenk, J., Spreitzer, D., Wolfinger, T. & Daghagheleh, O., 3 May 2021, (E-pub ahead of print) In: Steel research international.

    Research output: Contribution to journal › Review article › peer-review

  12. E-pub ahead of print

    Statistical Analysis of the Inclusions in Rare Earth-M (M = Ca and Ti) Treated Steel

    Xie, Y., Song, M., Wang, B., Zhu, H., Xue, Z., Mayerhofer, A., Michelic, S. K., Bernhard, C. & Schenk, J., 29 Apr 2021, (E-pub ahead of print) In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Characterization of the gamma-loop in the Fe-P system by coupling DSC and HT-LSCM with complementary in-situ experimental techniques

    Bernhard, M. C., Fuchs, N., Presoly, P., Angerer, P., Friessnegger, B. & Bernhard, C., Apr 2021, In: Materials characterization. 174, April, 17 p., 111030.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Influence of slag properties on the behavior of nonmetallic inclusions

    You, D., Bernhard, C. & Michelic, S. K., 21 Feb 2021.

    Research output: Contribution to conference › Abstract › peer-review

  15. Published

    Simulation of dynamic and meta-dynamic recrystallization behavior of forged Alloy 718 parts using a multi-class grain size model

    Gruber, C., Raninger, P., Stanojevic, A., Godor, F., Rath, M., Kozeschnik, E. & Stockinger, M., Jan 2021, In: Materials. 14, 1, p. 1-15 15 p., 111.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    An integrated approach for near-process modelling of the continuous casting of steel

    Santos, G., Bernhard, C., Bernhard, M. C., Taferner, M., Preuler, L., Ilie, S. & Laschinger, J., 2021, Proceedings of the 9th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking (STEELSIM 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Auswirkungen intergranularer Oxidation auf die Oberflächenrissbildung beim Stranggießen von Stahl

    Gaiser, G., 2021

    Research output: Thesis › Master's Thesis

  18. Published

    BOF Cold Model: Mixing time study at multiphase conditions

    Godinho de Carvalho, D. A., 2021

    Research output: Thesis › Doctoral Thesis

  19. Published

    Conclusions on AlN-precipitation kinetics in steel from HT-LSCM austenite grain growth observations

    Fuchs, N., 2021

    Research output: Thesis › Doctoral Thesis

  20. Published

    Enhanced Characterization of Non-Metallic Inclusions for (Sub) Micro Steel Cleanness Evaluations

    Mayerhofer, A., 2021

    Research output: Thesis › Doctoral Thesis

  21. Published

    Ermittlung der Grundlagen für die Skalierung von Plasma-Schmelzreduktionsreaktoren für die Eisenherstellung

    Zarl, M. A., 2021

    Research output: Thesis › Doctoral Thesis

  22. Published

    Evaluation of dissolution rate and behaviour of MgO carriers for primary and secondary metallurgical slags

    Cheremisina, E., Schenk, J., Viertauer, A., Nilica, R. & Rössler, R., 2021.

    Research output: Contribution to conference › Paper › peer-review

  23. Published

    Fatigue crack growth of deformed pearlitic rail steels under multiaxial loading

    Schnalzger, G., Maierhofer, J., Daves, W., Pippan, R. & Hohenwarter, A., 2021, In: Procedia Structural Integrity. 39, C, p. 313-326 14 p.

    Research output: Contribution to journal › Conference article › peer-review

  24. Published

    Gibbs energy minimization and particle dissolution

    Ogris, D., Schenk, J. & Gamsjäger, E., 2021.

    Research output: Contribution to conference › Presentation › Research › peer-review

  25. Published

    Influence of phosphorus on high-temperature phase transformations in steel

    Bernhard, M. C., 2021

    Research output: Thesis › Doctoral Thesis

  26. Published

    Iron

    Schenk, J., 2021, Kirk‐Othmer Encyclopedia of Chemical Technology. John Wiley & Sons, Großbritannien, p. 1-41 41 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  27. Published

    Parameterevaluierung für den kontinuierlichen Chargiervorgang von Eisenerzen und Zuschlägen im Wasserstoff-Plasma-Schmelzreduktionsprozess

    Cejka, J., 2021

    Research output: Thesis › Master's Thesis

  28. Published

    Processing and utilization of steelmaking slags in the European Union

    Schenk, J. & Draxler, M., 2021.

    Research output: Contribution to conference › Paper › peer-review

  29. Published

    Static dissolution evaluation of dolomite-based materials in EAF-type slag

    Scheiber, S., Cheremisina, E., Rieger, J., Schenk, J., Firsbach, F., Johnson, W., Chopin, T. & Nispel, M., 2021.

    Research output: Contribution to conference › Paper › peer-review

  30. Published

    Thermische Analyse des Aufschmelzverhaltens von Direct Reduced Iron

    Kern, M., 2021

    Research output: Thesis › Master's Thesis

  31. Published

    Thermodynamic and kinetic modelling of the dissolution process of lime particles in BOF slags

    Ogris, D. M., Schenk, J. & Gamsjäger, E., 2021.

    Research output: Contribution to conference › Paper › peer-review

  32. Published

    Untersuchung ausgewählter Einflüsse auf Kinetik und Morphologie der wasserstoffbasierten Reduktion von Eisenerzkonzentraten

    Engel, J. K., 2021

    Research output: Thesis › Master's Thesis

  33. 2020
  34. Published

    K1-MET—A Success Story Since Almost 20 Years

    Rieger, J., Schenk, J., Buergler, T., Kofler, I., Schatzl, M. & Huemer, G., Dec 2020, In: Steel research international. 91.2020, 12, 4 p., 2000233.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Special Issue: K1‐MET – Competence in Advanced Metallurgical and Environmental Process Development

    Schenk, J. (Guest editor) & Bürgler, T. (Guest editor), Dec 2020, In: Steel research international. 91.2020, 12

    Research output: Contribution to journal › Special issue › Research › peer-review

  36. Published

    Modeling of Ladle Refining Process Considering Mixing and Chemical Reaction

    You, D., Michelic, S. K. & Bernhard, C., 1 Nov 2020, In: Steel research international. 91.2020, 11, 9 p., 2000045.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Evaluation of the Iron Content in Non-Metallic Inclusions in Steel for (Sub)microscopic Steel Cleanness Description

    Mayerhofer, A., Michelic, S. K., Presoly, P. & Bernhard, C., 22 Oct 2020, p. 1-9.

    Research output: Contribution to conference › Paper › peer-review

  38. Published

    Investigation of Fe–C–Cr and Fe–C–Cr–Ni-based systems with the use of DTA and HT-LSCM methods

    Drozdová, Ľ., Smetana, B., Presoly, P., Novák, V., Machů, M., Bernhard, M., Francová, H., Zlá, S., Řeháčková, L. & Bernhard, C., 1 Oct 2020, In: Journal of Thermal Analysis and Calorimetry. 142, 2, p. 535-546 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    A study on the stability fields of arc plasma in the hpsr process

    Zarl, M. A., Farkas, M. A. & Schenk, J., Oct 2020, In: Metals. 10.2020, 10, p. 1-22 22 p., 1394.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Fluidization behavior and reducibility of iron ore fines during hydrogen-induced fluidized bed reduction

    Spreitzer, D. & Schenk, J., Oct 2020, In: Particuology. 52, p. 36-46 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    From henry bessemer’s invention to comprehensive converter process optimization

    Bazhin, V. Y., Schenk, J., Konovalov, G. V. & Kosovtseva, T. R., Oct 2020, In: Cvetnye metally. 2020, 10, p. 88-95 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Study on inclusion evolution through Si/Mn deoxidation in medium-carbon steels

    Kirchheimer, K., Schnitzer, R., Klösch, G., Fasching, J., Bernhard, C. & Michelic, S., 3 Sept 2020, Proceedings of the Iron and Steel Technology Conference, AISTech 2020. p. 1491-1502 12 p. (AISTech - Iron and Steel Technology Conference Proceedings; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    METHOD OF RECYCLING OIL-OILY-CONTAMINATED WASTES, OILY SCALE, COKE-CHEMICAL WASTES

    Хуснутдинов, И. Ш. (Inventor), Хуснутдинов, С. И. (Inventor), Алексеева, А. А. (Inventor), Бажин, В. Ю. (Inventor), Дубовиков, О. А. (Inventor) & Иоганн, Л. Ш. (Inventor), 21 Aug 2020, IPC No. F23G 5/ 027 A I, Patent No. RU2730304, Priority date 19 Mar 2019, Priority No. RU20190107878

    Research output: Patent

  44. Published

    Experimental Study of High Temperature Phase Equilibria in the Iron-Rich Part of the Fe-P and Fe-C-P Systems

    Bernhard, M. C., Presoly, P., Fuchs, N., Bernhard, C. & Kang, Y.-B., 23 Jul 2020, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 51.2020, 10, p. 5351-5364 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Experimental Quantification of Critical Parameters for Prediction of Surface Crack Formation in Continuous Casting

    Krobath, R. & Bernhard, C., 7 Jul 2020, In: Steel research international. 91.2020, 10, 8 p., 2000234.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Microstructural evolution of metallurgical coke: Evidence from Raman spectroscopy

    Rantitsch, G., Bhattacharyya, A., Günbati, A., Schulten, M.-A., Schenk, J., Letofsky-Papst, I. & Albering, J., 1 Jul 2020, In: International journal of coal geology. 227.2020, 1 July, 12 p., 103546.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Study on the Possible Error Due to Matrix Interaction in Automated SEM/EDS Analysis of Nonmetallic Inclusions in Steel by Thermodynamics, Kinetics and Electrolytic Extraction

    Mayerhofer, A., You, D., Presoly, P., Bernhard, C. & Michelic, S. K., 29 Jun 2020, In: Metals : open access journal . 10.2020, 7, p. 1-16 16 p., 860.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Critical evaluation and thermodynamic modeling of the Fe–P and Fe–C–P system

    Bernhard, M. C., Kang, Y.-B., Presoly, P., Gheribi, A. & Bernhard, C., 15 Jun 2020, In: Calphad: Computer Coupling of Phase Diagrams and Thermochemistry. 70.2020, September, 101795.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Structural Features and Combustion Behaviour of Waste Bamboo Chopstick Chars Pyrolysed at Different Temperatures

    Xu, R., Deng, S., Wang, W., Schenk, J. & Wang, F., 1 Jun 2020, In: BioEnergy research . 13.2020, 2, p. 439-451 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Elasto-Viscoplastic Material Model of a Directly-Cast Low-Carbon Steel at High Temperatures

    Krobath, M., Krobath, R., Bernhard, C. & Ecker, W., 15 May 2020, In: Materials. 13.2020, 10, 13 p., 2281.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Tailoring the FeO/SiO2 Ratio in Electric Arc Furnace Slags to Minimize the Leaching of Vanadium and Chromium

    Neuhold, S. F., Algermissen, D., Drissen, P., Adamczyk, B., Presoly, P., Sedlazeck, K. P., Schenk, J., Raith, J., Pomberger, R. & Vollprecht, D., 1 Apr 2020, In: Applied Sciences : open access journal. 10, 7, p. 5249 17 p., 2549.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Utilization of Experimental Data as Boundary Conditions for the Solidification Model Tempsimu-3D

    Preuler, L., Louhenkilpi, S., Bernhard, C., Ilie, S. & Taferner, M., 17 Mar 2020, In: Berg- und hüttenmännische Monatshefte : BHM. 165.2020, 5, p. 237-242 6 p.

    Research output: Contribution to journal › Article › Research

  53. E-pub ahead of print

    The effect of alkali on the reaction kinetics and strength of blast furnace coke

    Dastidar, M. G., Bhattacharyya, A., Sarkar, B. K., Dey, R., Mitra, M. K. & Schenk, J., 21 Feb 2020, (E-pub ahead of print) In: Fuel. 268.2020, May, 10 p., 117388.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Slag Formation during Reduction of Iron Oxide Using Hydrogen Plasma Smelting Reduction

    Naseri Seftejani, M., Schenk, J., Spreitzer, D. & Zarl, M. A., 20 Feb 2020, In: Materials. 13.2020, 4, 24 p., 935.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Novel sintering indexes to evaluate and correlate the crystal characteristics and compressive strength in magnetite pellets

    Wang, Y., Schenk, J., Zhang, J., Liu, Z., Wang, J., Niu, L. & Cheng, Q., 15 Feb 2020, In: Powder Technology. 362.2020, 15 February, p. 517-526 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Effect of CO2 and O2 Mixed Injection on the Decarburization and Manganese Retention in High-Mn Twinning-Induced Plasticity Steels

    Liu, H., Liu, J., Schenk, J., Penz, F. M., Sun, L., Zhang, R. & An, Z., 3 Feb 2020, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 51.2020, 2, p. 756-762 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Aktueller Stand und Perspektiven für eine CO2-freie Stahlerzeugung

    Sormann, A. & Schenk, J., Feb 2020, In: Stahl + Technik. 02, 2020, p. 32-35 4 p.

    Research output: Contribution to journal › Article › Transfer

  58. Published

    Utilization of metallurgical slag with presence of novel CaO-MgO-SiO2-Al2O3 as a composite sorbent for wastewater treatment contaminated by cerium

    Morozova, A. G., Lonzinger, T. M., Skotnikov, V. A., Sahu, J. N., Mikhailov, G. G., Schenk, J., Bhattacharyya, A. & Kapelyushin, Y., 28 Jan 2020, In: Journal of Cleaner Production. 255.2020, 9 p., 120286.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    HT-LSCM as a Tool for Indirect Determination of Precipitates by Real-Time Grain Growth Observations

    Fuchs, N., Bernhard, C., Michelic, S. & Dippenaar, R., 1 Jan 2020, TMS 2020 149th Annual Meeting and Exhibition Supplemental Proceedings. Peng, Z., Hwang, J.-Y., Downey, J., Gregurek, D., Zhao, B., Yucel, O., Keskinkilic, E., Jiang, T., White, J. & Mahmoud, M. (eds.). Springer, p. 47-55 9 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Auflösungsverhalten von Schrott in Roheisen unter Schutzgasatmosphäre

    Halwax, A., 2020

    Research output: Thesis › Master's Thesis

  61. Published

    Auswirkung unterschiedlicher Desoxidationsmaßnahmen über verschiedene Prozessstufen auf den Reinheitsgrad ausgewählter Edel- und Sonderstähle

    Franek, J. E. J., 2020

    Research output: Thesis › Master's Thesis

  62. Published

    Development of characterization methods for the evaluation of the kinetic behavior and the fluidization of iron ore fines during hydrogen-induced fluidized bed reduction

    Spreitzer, D., 2020

    Research output: Thesis › Doctoral Thesis

  63. Published

    Entwicklung von Methoden zur Bewertung und Kontrolle der Alkalienbilanz eines Hochofens

    Spatzker, A., 2020

    Research output: Thesis › Doctoral Thesis

  64. Published

    Experimental investigation of the inclusion behavior in Ti-stabilized interstitial-free steels and its relevance for clogging phenomena in continuous casting processes

    Dorrer, P., 2020

    Research output: Thesis › Doctoral Thesis

  65. Published

    Improvement of laboratory reduction tests to reproduce the industrial reduction behavior of iron ore pellets under MIDREX conditions

    Daghagheleh, O., 2020

    Research output: Thesis › Master's Thesis

  66. Published

    Methods and technologies for the processing of water-hydrocarbon emulsions and technogenic raw materials of metallurgical and petrochemical enterprises: A review

    Khusnutdinov, S. I., Schenk, J., Khusnutdinov, I. S., Safiulina, A. F., Bazhin, V. Y. & Dubovikov, O. A., 2020, Topical Issues of Rational Use of Natural Resources 2019. Litvinenko, V. (ed.). p. 525-532 8 p. (Topical Issues of Rational Use of Natural Resources 2019; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Optimization of welding consumables for arc welding with flux cored wire electrodes

    Özcelik, K., 2020

    Research output: Thesis › Master's Thesis

  68. Published

    Reduction of hematite using hydrogen plasma smelting reduction

    Naseri Seftejani, M., 2020

    Research output: Thesis › Doctoral Thesis

  69. Published

    Structural Improvement of Cast Ingots for Highly Alloyed Steel Grades

    Baumgartner, K., 2020

    Research output: Thesis › Doctoral Thesis

  70. Published

    Sustainable steelmaking - A strategic evaluation of the future potential of hydrogen in the steel industry

    Skorianz, M., Engel, E. & Schenk, J., 2020, Proceedings of the Iron and Steel Technology Conference, AISTech 2020. Association for Iron and Steel Technology, AISTECH, p. 372-381 10 p. (AISTech - Iron and Steel Technology Conference Proceedings; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    Systematic Investigation of Mold Level Fluctuation and its Impacts on the Quality of Slabs and Cold Rolled Strips

    Trindade dos Santos, G., 2020

    Research output: Thesis › Master's Thesis

  72. Published

    Untersuchung des Verhaltens von AHSS Legierungskonzepten in kontinuierlichen Gießwalzprozessen

    Pfeiffer, A., 2020

    Research output: Thesis › Master's Thesis

  73. 2019
  74. Published

    Gasification Characteristics and Kinetics of Unburned Pulverized Coal in Blast Furnaces

    Zan, R., Wang, W., Xu, R., Schenk, J., Zheng, H. & Wang, H., 13 Nov 2019, In: Energies. 12.2019, 22, 14 p., 4324.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    The Role of FeTi Addition to Micro-inclusions in the Production of ULC Steel Grades via the RH Process Route

    Bernhard, C., Dorrer, P., Michelic, S. K. & Rössler, R., 9 Oct 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 11, p. 475-478 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    The Role of FeTi Addition to Micro-inclusions in the Production of ULC Steel Grades via the RH Process Route

    Bernhard, C., Dorrer, P., Michelic, S. K. & Rössler, R., 9 Oct 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 11, p. 475-478 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    The Role of Grain Boundary Oxidation on Surface Crack Formation under Continuous Casting Conditions

    Krobath, R., Bernhard, C., Ilie, S., Six, J., Hahn, S. & Pennerstorfer, P., 2 Oct 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 11, p. 461-465 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    método e disposição para a produção de ferro gusa líquido ou produtos precursores de aço líquido

    Georg, A. (Inventor), Hado, H. (Inventor), Johann, W. (Inventor), Johannes, L. S. (Inventor), Kurt, W. (Inventor), Martin, S. (Inventor), Robert, M. (Inventor) & Thomas, E. (Inventor), 24 Sept 2019, IPC No. F27D 17/ 00 A I, Patent No. BRPI0908724, Priority date 30 Jan 2009, Priority No. WO2009EP51058

    Research output: Patent

  79. Published

    Analyse von Fe,Mn-Oxiden mittels REM/EDX: Bringt die elektrolytische Extraktion was sie verspricht

    Mayerhofer, A., Michelic, S. K. & Bernhard, C., 18 Sept 2019, p. 181-186. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  80. Published

    Analyse von Fe,Mn-Oxiden mittels REM/EDX: Bringt die elektrolytische Extraktion was sie verspricht?

    Mayerhofer, A., 18 Sept 2019.

    Research output: Contribution to conference › Poster › Research › peer-review

  81. Published

    Reduction of Iron Oxides with Hydrogen–A Review

    Spreitzer, D. & Schenk, J., 18 Aug 2019, In: Steel research international. 90.2019, 10, 17 p., 1900108.

    Research output: Contribution to journal › Review article › peer-review

  82. E-pub ahead of print

    Iron Ore Reduction by Hydrogen Using a Laboratory Scale Fluidized Bed Reactor: Kinetic Investigation—Experimental Setup and Method for Determination

    Spreitzer, D. & Schenk, J., 24 Jul 2019, (E-pub ahead of print) In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 50.2019, 5, p. 2471-2484 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    High precious phase diagrams – a roadmap for a successful casting processing

    Presoly, P., Bernhard, M. C., Bernhard, C., Hahn, S., Pennerstorfer, P., Ilie, S. & Six, J., 26 Jun 2019, 4th ESTAD European Steel Technology and Appliciation Days. Steel Institute VDEh, 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    The role of grain boundary oxidation on surface crack formation under continuous casting conditions

    Krobath, R., Bernhard, C., Ilie, S., Six, J., Hahn, S. & Pennerstorfer, P., 26 Jun 2019, Proceedings of the 4th ESTAD . Duesseldorf, Germany: Steel Institute VDEh

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Co-utilization of converter sludge-containing dedust wastewater in iron ore sintering to save fresh water, enhance quality and reduce pollution

    Wang, Y., Zhang, J., Liu, Z., Du, C., Schenk, J., Shao, J. & Zhang, Y., 21 Jun 2019, In: Journal of Cleaner Production. 234.2019, 10 October, p. 157-170 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Cerium Containing Inclusions: Kinetic Model and Experimental Results

    Baumgartner, K., Bernhard, C., You, D. & Michelic, S. K., 20 Jun 2019.

    Research output: Contribution to conference › Poster › Research

  87. Published

    Characterization of coke surface using topographic and specific surface area measurement techniques

    Bhattacharyya, A., Rantitsch, G., Schenk, J., Guenbati, A., Janhsen, U. & Schulten, M., Jun 2019, METEC-ESTAD 2019 Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Reduction of Haematite Using Hydrogen Thermal Plasma

    Naseri Seftejani, M., Schenk, J. & Zarl, M. A., 16 May 2019, In: Materials. 12.2019, 10, 22 p., 1608.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Investigation of water droplet impingement under conditions of the secondary cooling zone of a continuous caster

    Preuler, L., Peyha, M., Weiß, C., Bernhard, C. & Ilie, S., 6 May 2019, Proceedings of the AISTech 2019, Pittsburgh. 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Structural Change of Coke During the Burden Descent in an Experimental Blast Furnace

    Bhattacharyya, A., Rantitsch, G., Wiener, J., Schenk, J., Pethke, J. & Fredriksson, U., May 2019, AISTECH 2019 Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Analytical and numerical determination of the heat transfer coefficient between scrap and hot metal based on small-scale experiments

    Penz, F. M., Tavares, R. P., Weiss, C., Schenk, J., Ammer, R., Pastucha, K. & Klösch, G., 24 Apr 2019, In: International journal of heat and mass transfer. 138.2019, August, p. 640-646 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Kornfeinung ausscheidungsverfestigter Hochtemperaturferrite mittels Ce-haltiger Einschlüsse

    Godor, F. R., Mayerhofer, A., Presoly, P., Clemens, H., Mayer, S. & Bernhard, C., 4 Apr 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 5, p. 220-224 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  93. E-pub ahead of print

    Residual Processing in the European Steel Industry: A Technological Overview

    Rieger, J. & Schenk, J., 3 Apr 2019, (E-pub ahead of print) In: Journal of Sustainable Metallurgy. 5.2019, 3, p. 295-309 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    In-situ Untersuchung von Austenitkornwachstumsprozessen in Stählen mittels Hochtemperatur Laser-Scanning-Konfokal-Mikroskop

    Fuchs, N. & Bernhard, C., 1 Apr 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 5, p. 200-204 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Evaluation of the Influences of Scrap Melting and Dissolution during Dynamic Linz–Donawitz (LD) Converter Modelling

    Penz, F. M., Schenk, J., Ammer, R., Kloesch, G. & Pastucha, K., Apr 2019, In: Processes : open access journal. 7.2019, 4

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Minimising the leaching of V and Cr from electric arc furnace slags by decreasing the FeO/SiO2 ratio

    Neuhold, S. F., Höllen, D., Presoly, P., Adamczyk, B., Drissen, P., van Zomeren, A., Schüler, S. & Mudersbach, D., Apr 2019, Proceedings of the 6th Internation Slag Valorisation Symposium: Science, Innovation & Entrepreneurship in Pursuit of a Sustainable World. Malfiet, A., Peys, A. & Di Maria, A. (eds.). Mechelen, Vol. 6. p. 175-178

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    In-situ observation of non-metallic inclusions in the system steel-slag-refractory: Set-up, limitations and results

    Michelic, S. K., Dieguez Salgado, U. & Bernhard, C., 11 Mar 2019.

    Research output: Contribution to conference › Presentation › Research › peer-review

  98. Published

    A Review of Steel Scrap Melting in Molten Iron-Carbon Melts

    Penz, F. M. & Schenk, J., 1 Jan 2019, In: Steel research international. 2019, 20 p., 1900124.

    Research output: Contribution to journal › Review article › peer-review

  99. Published

    Diffusive steel scrap melting in carbon-saturated hot metal-Phenomenological investigation at the solid-liquid interface

    Penz, F. M., Schenk, J., Ammer, R., Klösch, G., Pastucha, K. & Reischl, M., 1 Jan 2019, In: Materials. 12.2019, 8, 1358.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Evaluation of mixing and mass transfer at ternium Brazil's BOF through cold model experiments

    Silveira, D. C. O., Ribeiro, M. A., Salgado, R. S., Tavares, R. P., Maia, B. T., De Carvalho, D. A. G. & Schenk, J., 1 Jan 2019, Iron and Steel Technology Conference Proceedings. Vol. 2019-May. p. 979-986 8 p. (AISTech - Iron and Steel Technology Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Kinetics and Mechanisms of Dolime Dissolution in Steelmaking Slag

    Cheremisina, E., Schenk, J., Nocke, L., Paul, A. & Wimmer, G., 1 Jan 2019, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 50.2019, 3, p. 1269 - 1276 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Structural change of coke structure during the burden descend in an experimental blast furnace

    Bhattacharyya, A., Rantitsch, G., Wiener, J., Schenk, J., Pethke, J. & Fredriksson, U., 1 Jan 2019, Iron and Steel Technology Conference Proceedings. Vol. 2019-May. p. 263-268 6 p. (AISTech - Iron and Steel Technology Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    Study on the Influence of FeTi‐Addition on the Inclusion Population in Ti‐Stabilized ULC Steels and Its Consequences for SEN‐Clogging

    Dorrer, P., Michelic, S. K., Bernhard, C., Penz, A. & Rössler, R., 1 Jan 2019, In: Steel research international. 2019, 5, 13 p., 1800635.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...11 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 2201