Chair of Automation and Measurement (530)
Organisational unit: Chair
Research output
- 2012
- Published
Automated thermographic non-destructive testing
Oswald-Tranta, B., 2012Research output: Thesis › Habilitation thesis › peer-review
- Published
Cross Development for Real-Time Systems and Embedded Automation
Zhuang, Y., 2012, 96 p.Research output: Thesis › Diploma Thesis › peer-review
- Published
Discrete Inverse Problems in Mechatronics
Harker, M., 2012.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Embedded Simulation
Probst, G. & Rath, G., 2012.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Embedded Simulation for Automation of Material Manipulators in a PVD Coating Process
Rath, G., Lackner, J. M. & Waldhauser, W., 2012, Proceeding of the 2012 Winter Simulation Conference. p. con281-1-con281-10Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Endbericht Innovationsscheck 835313
Pucher, M., 2012Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Fusion of geometric and thermographic data for automated defect detection
Oswald-Tranta, B. & O'Leary, P., 2012, In: Journal of electronic imaging. 21, p. 021108-1-8Research output: Contribution to journal › Article › Research › peer-review
- Published
Laser Guided Mining Machine PR1: Principle of Operation / Feasibility Study
Gugg, C., 2012Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Laser Guided Mining Machine PR2: Target Evaluation
Gugg, C., 2012Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Laser Guided Mining Machine PR3: Weighted Least Squares Polynomial Fitting
Gugg, C., 2012Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Laser Guided Mining Machine PR4: Multi-Camera Mapping Function
Gugg, C., 2012Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Least-Squares Polynomial Approximation for the Reduction of Frequency Spreading and Gibbs Error in Fourier Analysis
O'Leary, P. & Harker, M., 2012, In: IEEE transactions on instrumentation and measurement. p. 1-27Research output: Contribution to journal › Article › Research › peer-review
- Published
Maximum Likelihood Circle Fitting by Optimized Path Integration
Harker, M., 2012.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Maximum Likelihood Circle Fitting by Optimized Path Integration
Harker, M. & O'Leary, P., 2012, Proceedings of the 15th International Conference on Geometry and Graphics. p. 1-10Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Messungen von Drahtproben im Labor
Oswald-Tranta, B. & Schmidt, R., 2012Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Navigation via Optical Fiber Cables PR1: Principle of Operation / Feasibility Study
Gugg, C., 2012Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
New Approaches to Machine Vision Based Displacement Analysis
Neumayr, R., 2012.Research output: Contribution to conference › Poster › Research › peer-review
- Published
New Approaches to Machine Vision Based Displacement Analysis
Neumayr, R., Harker, M. & O'Leary, P., 2012, Proceedings 2012 IEEE I2MTC. p. 979-984Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Opto-Electronic Perpendicular
Gugg, C., 2012.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Polynomial Basis Functions and their Application to Hierarchical Image Processing
Badshah, A., 2012, 127 p.Research output: Thesis › Doctoral Thesis
- Published
Probenehmer GZ1253 - Druckfestigkeit und Dichtheit von Vials
Pucher, M., 2012Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Probenehmer GZ1253 - Druckfestigkeit und Probenahmemöglichkeiten
Pucher, M., 2012Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Probenehmer GZ1253 - Laboraufbau des Probenahmesystems
Pucher, M., 2012Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Probenehmer GZ1253 - Laboraufbau Gesamtsystem
Pucher, M., 2012Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Probenehmer GZ1253 - Möglichkeiten zur Probenahme
Pucher, M., 2012Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Probenehmer GZ1253 - Möglichkeiten zur Probenahme durch Durchstechen einer Membran
Pucher, M., 2012Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Scanning Pulse Phase Thermografie mit induktiver linearer Heizung
Oswald-Tranta, B., 2012, DGZfP Berichtsband 136-CD, DACH Jahrestagung 2012.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Scanning Pulse Phase Thermography with inductive line source
Oswald-Tranta, B. & Sorger, M., 2012, 11th International Conference on Quantitative Infrared Thermography. p. 264-1-264-10Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Scanning pulse phase thermography with line heating
Oswald-Tranta, B. & Sorger, M., 2012, In: Quantitative infra red thermography (QIRT Journal). 9, p. 103-122Research output: Contribution to journal › Article › Research › peer-review
- Published
Schalungsdruckmessung
Probst, G. & Rath, G., 2012.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Simulation for Operator Training in Production Machinery
Rath, G., 2012, Real-time Simulation Technologies: Principles, Methodologies, and Applications. p. 439-499Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
- Published
Spectral Analysis
Gugg, C., 2012.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Steuerung und Aufbau des Prototyps
Pucher, M., 2012Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Strain Analysis by Regularized Non-Rigid Registration
Badshah, A., O'Leary, P., Harker, M. & Tscharnuter, D., 2012, Eleltronic Imaging 2012. SPIE, The Internat. Soc. for Optical Engineering, p. 8300D-1-8300D-6Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Surface Modelling using Discrete Basis Functions for Real-Time Automatic Inspection
O'Leary, P. & Harker, M., 2012, 3-D Surface Geometry and Reconstruction: Developing Concepts and Applications. Chandra Pati, U. (ed.). p. 216-264Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
- Published
Thermografie - Zerstörungsfreie Prüfung
Oswald-Tranta, B. & Sorger, M., 2012.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Thermografische Rissprüfung von Metallteilen, Zwischenbericht
Oswald-Tranta, B. & Sorger, M., 2012Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Thermo-induktive Prüfung von Turbogehäusen, Ergebnisse
Oswald-Tranta, B., Schmidt, R. & Probst, G., 2012Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Vom Prototyp zum Serienprodukt
Probst, G. & Rath, G., 2012.Research output: Contribution to conference › Poster › Research › peer-review
- 2011
- Published
THERMOGRAFISCHE PRÜFVORRICHTUNG
Oswald-Tranta, B. (Inventor), O'Leary, P. (Inventor) & Wally, G. (Inventor), 15 Nov 2011, IPC No. G01N 25/ 72 A I, Patent No. AT530897T, Priority date 30 Jun 2008, Priority No. EP20080011811Research output: Patent
- Published
Precise pose measurement with single camera calibration for planar parallel manipulators
Neumayr, R., Zsombor-Murray, P. & O'Leary, P., 24 Oct 2011, In: Transactions of the Canadian Society for Mechanical Engineering. 35, 2, p. 201-213 13 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Verfahren und Vorrichtung zum Ermitteln einer Sollbewegung, zum Bewegen und zum Modifizieren eines verfahrbaren Bauteils
Lang, J. (Inventor), Haselwanter, A. (Inventor), Bindar, G. (Inventor), Mayr, J. (Inventor), Harrich, A. (Inventor), Hirz, M. (Inventor) & Gfrerrer, A. (Inventor), 13 Oct 2011, IPC No. B60J 1/ 12 A I, Patent No. DE102010003882, Priority date 12 Apr 2010, Priority No. DE20101003882Research output: Patent
- Published
6 DOF Motion Control of a Robot-Driven Camera and its Application in Virtual Scenes
Li, Y., 2011, 83 p.Research output: Thesis › Diploma Thesis
- Published
Active Laser Target, Abmessungen Messbox, Bewertung Kompensation Kameralinse f=3.6mm
Neumayr, R., 2011Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Active Laser Target / Auslegung aktiver Messbereich bei max Längsneigung und Gierwinkel-optimaler Abstand der Targets
Neumayr, R., 2011Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Active Laser Target + Bewertung Targets + Bewertung Halbspiegel, Kamera mittig in Aluplatte integriert + Bewertung Kalibration Kameralinsen f=2.1mm –5.7mm+ Vorschlag Abmessungen/ geeignete Komponenten
Neumayr, R., 2011Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Active Laser Target / Inbetriebnahme xy-Tisch, Kalibrationsaufbau-Kalibrierungsmessung
Neumayr, R., 2011Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Active Laser Target / Kalibrieren der Messbox mit xy-Tisch
Neumayr, R., 2011Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Active Laser Target / Kamerakalibierung / Targetsuche
O'Leary, P., Neumayr, R. & Gugg, C., 2011Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Active Laser Target / Kamerakalibrierung
Neumayr, R., O'Leary, P. & Gugg, C., 2011Research output: Book/Report › Commissioned report › Transfer › peer-review
