Materials and Design, ‎0264-1275

Journal

ISSNs0264-1275, 0261-3069
Additional searchable ISSN (electronic)1873-4197
1 - 50 out of 104Page size: 50

Research output

  1. 2025
  2. Published

    3D multi-site hydrogen evolution reaction catalysts on nanoimprinted surfaces, structured via multi-photon lithography derived masks

    Jelinek, A., Neumüller, D., Gammer, C., Eckert, J. & Kiener, D., Apr 2025, In: Materials and Design. 252, 113809.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Combined X-ray microdiffraction and micromechanical testing for direct measurement of thin film elastic constants

    Janknecht, R., Hahn, R., Koutná, N., Todt, J., Meindlhumer, M., Davidok, A., Riedl, H., Keckes, J. & Mayrhofer, P. H., 15 Feb 2025, In: Materials and Design. 252.2025, April, 11 p., 113720.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    A high-throughput framework for pile-up correction in high-speed nanoindentation maps

    Rossi, E., Duranti, D., Rashid, S., Zitek, M., Daniel, R. & Sebastiani, M., 11 Feb 2025, In: Materials and Design. 251.2025, March, 18 p., 113708.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    20 kHz X-ray diffraction on Cu thin films explores thermomechanical fatigue at high strain-rates

    Ziegelwanger, T., Reisinger, M., Vedad, B., Hlushko, K., Van Petegem, S., Todt, J., Meindlhumer, M. & Keckes, J., 31 Jan 2025, In: Materials and Design. 251.2025, March, 9 p., 113664.

    Research output: Contribution to journal › Article › Research › peer-review

  6. 2024
  7. Published

    Enhanced hydrogen evolution via nano-patterned Pt-based metallic glass and dynamic copper oxide foam formation

    Cai, F.-F., Sarac, B., Akman, A., Londoño, J. J., Gümrükcü, S., Schweiger, L., Hantusch, M., Schroers, J., Blatter, A., Gebert, A., Spieckermann, F. & Eckert, J., 12 Dec 2024, In: Materials and Design. 249.2025, January, 11 p., 113530.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Assessing the fracture toughness in Tungsten-based nanocomposites: A micro-mechanical approach

    Schmuck, K. S., Burtscher, M., Alfreider, M. & Kiener, D., 6 Nov 2024, In: Materials and Design. 247.2024, November, 11 p., 113433.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Dispersoid evolution in Al–Zn–Mg alloys by combined addition of Hf and Zr: A mechanistic approach

    Wessely, V., Töpfer, U., Basu, I., Schäublin, R. E., Pogatscher, S., Uggowitzer, P. & Löffler, J. F., 6 Oct 2024, In: Materials and Design. 247.2024, November, 17 p., 113366.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Glass and nanocrystalline phase formation in CuZrAg alloys: Insights from combinatorial thin film libraries studied by mapping synchrotron X-ray diffraction

    Putz, B., Milkovič, O., Mohanty, G., Ipach, R., Pethö, L., Milkovičová, J., Saksl, K. & Michler, J., Aug 2024, In: Materials and Design. 244, 113144.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Automatic and time-resolved determination of fracture characteristics from in situ experiments

    Schmuck, K. S., Antenreiter, M., Alfreider, M. & Kiener, D., Jul 2024, In: Materials & design. 243.2024, July, 12 p., 113038.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Probing local adhesion: A miniaturized multi-photon lithography design demonstrated on silanized vs. untreated surfaces

    Jelinek, A., Rossegger, E., Schlögl, S., Kiener, D. & Alfreider, M., Jun 2024, In: Materials and Design. 242.2024, June, 13 p., 112994.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Additive manufacturing of 3D yttria-stabilized zirconia microarchitectures

    Winczewski, J. P., Zeiler, S., Gabel, S., Maestre, D., Merle, B., Gardeniers, J. G. E. & Susarrey-Arce, A., 1 Feb 2024, In: Materials and Design. 238.2024, February, 11 p., 112701.

    Research output: Contribution to journal › Article › Research › peer-review

  14. 2023
  15. Published

    Nanoscale printed tunable specimen geometry enables high-throughput miniaturized fracture testing

    Jelinek, A., Žák, S., Cordill, M. J., Kiener, D. & Alfreider, M., Oct 2023, In: Materials and Design. 234.2023, October, 17 p., 112329.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Microstructural refinement by spontaneous recrystallization without prior deformation of a 15-5 PH steel alloy and its mechanism

    Ressel, G., Brandl, D., Hönigmann, T., Lukas, M., Stark, A., Gruber, C., Lukas, S., Stockinger, M. & Kozeschnik, E., 27 Sept 2023, In: Materials and Design. 234.2023, October, 11 p., 112370.

    Research output: Contribution to journal › Article › Research › peer-review

  17. E-pub ahead of print

    Mapping strain across Co80Ta7B13 / Co62Ta6B32 glassy interfaces

    Evertz, S., Zalesak, J., Hans, M., Jansen, H. C., Keckes, J., Sheng, H., Eckert, J. & Gammer, C., 15 Sept 2023, (E-pub ahead of print) In: Materials and Design. 234.2023, October, 7 p., 112327.

    Research output: Contribution to journal › Article › Research › peer-review

  18. E-pub ahead of print

    Design of high-strength martensitic steels by novel mixed-metal nanoprecipitates for high toughness and suppressed hydrogen embrittlement

    Moshtaghi, M., Maawad, E., Bendo, A., Krause, A., Todt, J., Keckes, J. & Safyari, M., 14 Sept 2023, (E-pub ahead of print) In: Materials & design. 234.2023, October, 15 p., 112323.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Direct observation of crack arrest after bridge notch failure: A strategy to increase statistics and reduce FIB-artifacts in micro-cantilever testing

    Zhang, Y., Bartosik, M., Brinckmann, S., Lee, S. & Kirchlechner, C., Sept 2023, In: Materials and Design. 233.2023, September, 7 p., 112188.

    Research output: Contribution to journal › Article › Research › peer-review

  20. E-pub ahead of print

    Ti40Zr10Cu36Pd14 bulk metallic glass as oral implant material

    Rezvan, A., Sharifikolouei, E., Soprunyuk, V., Schranz, W., Todt, J., Lassnig, A., Gammer, C., Sifferlinger, N. A., Asci, A., Okulov, I., Schlögl, S., Keckes, J., Najmi, Z., Cochis, A., Scalia, A. C., Rimondini, L., Sarac, B. & Eckert, J., 16 Aug 2023, (E-pub ahead of print) In: Materials and Design. 233.2023, 10 p., 112256.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Exploring the high-temperature deformation behavior of monocrystalline silicon – An advanced nanoindentation study

    Schaffar, G., Tscharnuter, D. & Maier-Kiener, V., 29 Jul 2023, In: Materials and Design. 2023, 233, 10 p., 112198.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Exploring the mechanical properties of additively manufactured carbonrich zirconia 3D microarchitectures

    Winczewski, J. P., Zeiler, S., Gabel, S., Susarrey-Arce, A., Gardeniers, J. G. E. & Merle, B., 11 Jul 2023, In: Materials and Design. 232.2023, August, 11 p., 112142.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Nanoindentation creep of supercrystalline nanocomposites

    Yan, C., Bor, B., Plunkett, A., Domenech, B., Maier-Kiener, V. & Giuntini, D., Jul 2023, In: Materials and Design. 231.2023, July, 14 p., 112000.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Precious metal amorphous AgAuSi: Alloy design by swapping gold for silver

    Weniger, L.-M., Gammer, C., Niewczas, M., Cordill, M. J., Spieckermann, F., Djemia, P., Faurie, D., Li, C.-H., Lassnig, A., Terziyska, V., Mitterer, C., Eckert, J. & Glushko, O., 17 Jun 2023, In: Materials and Design. 232.2023, August, 11 p., 112099.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    In situ fragmentation of Al/Al2O3 multilayers on flexible substrates in biaxial tension

    Putz, B., Edwards, T. E. J., Huszar, E., Pethö, L., Kreiml, P., Cordill, M. J., Thiaudière, D., Chiroli, S., Faurie, D., Renault, P.-O. & Michler, J., 12 Jun 2023, In: Materials and Design. 232.2023, August, 15 p., 112081.

    Research output: Contribution to journal › Article › Research › peer-review

  26. E-pub ahead of print

    Evaluation of combinatorial algorithms for optimizing highly nonlinear structural problems

    Rettl, M., Pletz, M. & Schuecker, C., 28 Apr 2023, (E-pub ahead of print) In: Materials and Design. 230.2023, June, 15 p., 111958.

    Research output: Contribution to journal › Article › Research › peer-review

  27. E-pub ahead of print

    Inverse parameter determination for metal foils in multifunctional composites

    Trost, C. O. W., Krobath, M., Žák, S., Hammer, R., Krivec, T., Gänser, H.-P., Trost, T. W., Hohenwarter, A. & Cordill, M. J., 9 Feb 2023, (E-pub ahead of print) In: Materials and Design. 227.2023, March, 13 p., 111711.

    Research output: Contribution to journal › Article › Research › peer-review

  28. 2022
  29. E-pub ahead of print

    An improved process scan strategy to obtain high-performance fatigue properties for Scalmalloy®

    Schimbäck, D., Mair, P., Kaserer, L., Perfler, L., Palm, F., Leichtfried, G. & Pogatscher, S., 22 Nov 2022, (E-pub ahead of print) In: Materials and Design. 224.2022, December, 11 p., 111410.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Design of oxygen-doped TiZrHfNbTa refractory high entropy alloys with enhanced strength and ductility

    Iroc, L. K., Tukac, O. U., Tanrisevdi, B. B., El-Atwani, O., Tunes, M., Kalay, Y. E. & Aydogan, E., Nov 2022, In: Materials and Design. 223.2022, November, 12 p., 111239.

    Research output: Contribution to journal › Article › Research › peer-review

  31. E-pub ahead of print

    Interface mediated deformation and fracture of an elastic–plastic bimaterial system resolved by in situ transmission scanning electron microscopy

    Alfreider, M., Balbus, G., Wang, F., Zechner, J., Gianola, D. S. & Kiener, D., 14 Sept 2022, (E-pub ahead of print) In: Materials and Design. 223.2022, November, 17 p., 111136.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    New-generation biocompatible Ti-based metallic glass ribbons for flexible implants

    Yüce, E., Zarazúa-Villalobos, L., Ter-Ovanessian, B., Sharifikolouei, E., Najmi, Z., Spieckermann, F., Eckert, J. & Sarac, B., 13 Sept 2022, In: Materials and Design. 223.2022, November, 13 p., 111139.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    In situ micromechanical analysis of a nano-crystalline W-Cu composite

    Burtscher, M., Alfreider, M., Kainz, C., Schmuck, K. S. & Kiener, D., Aug 2022, In: Materials and Design. 220.2022, August, 9 p., 110848.

    Research output: Contribution to journal › Article › Research › peer-review

  34. E-pub ahead of print

    Residual stress distribution of a locally and inductively quenched and tempered 50CrMo4 steel analysed by synchrotron transmission techniques

    Jászfi, V., Prevedel, P., Raninger, P., Todt, J., Mevec, D., Godai, Y., Maawad, E. & Ebner, R., 16 Jul 2022, (E-pub ahead of print) In: Materials & design. 221.2022, September, 9 p., 110936.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Influence of layer architecture on fracture toughness and specimen stiffness in polymer multilayer composites

    Wiener, J., Arbeiter, F., Kolednik, O. & Pinter, G., Jul 2022, In: Materials and Design. 219.2022, July, 10 p., 110828.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Structural characterisation of Cu-Zr thin film combinatorial libraries with synchrotron radiation at the limit of crystallinity

    Putz, B., Milkovič, O., Mohanty, G., Ipach, R., Pethö, L., Milkovičová, J., Maeder, X., Edwards, T. E. J., Schweizer, P., Coduri, M., Saksl, K. & Michler, J., Jun 2022, In: Materials and Design. 218.2022, June, 12 p., 110675.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Influence of grain aspect-ratio on the fracture properties of ultrafine-grained tantalum

    Hohenwarter, A., Rockenschaub, M. & Renk, O., Apr 2022, In: Materials and Design. 216.2022, April, 11 p., 110545.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Reactive interdiffusion of an Al film and a CoCrFeNi high-entropy alloy

    Zhang, Z., Ketov, S. V., Fellner, S., Sheng, H., Mitterer, C., Song, K. K., Gammer, C. & Eckert, J., 10 Mar 2022, In: Materials and Design. 216.2022, April, 8 p., 110530.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Effect of crystal orientation on the hardness and strength of piezoelectric LiNbO3 substrates for microelectronic applications

    Gruber, M., Leitner, A., Kiener, D., Supancic, P. & Bermejo, R., 2022, In: Materials and Design. 213, 110306.

    Research output: Contribution to journal › Article › Research › peer-review

  40. 2021
  41. Published

    How electron beam melting tailors the Al-sensitive microstructure and mechanical response of a novel process-adapted y-TiAl based alloy

    Wimler, D., Käsznar, K., Musi, M., Breuning, C., Markl, M., Keckes, J., Clemens, H., Körner, C. & Mayer, S., 15 Dec 2021, In: Materials and Design. 212.2021, 15 December, 13 p., 110187.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Porosity and thickness effect of Pd–Cu–Si metallic glasses on electrocatalytic hydrogen production and storage

    Sarac, B., Karazehir, T., Yüce, E., Mühlbacher, M., Sarac, A. S. & Eckert, J., 7 Sept 2021, In: Materials and Design. 210.2021, 15 November, 9 p., 110099.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Correlating point defects with mechanical properties in nanocrystalline TiN thin films

    Zhang, Z., Ghasemi, A., Koutná, N., Xu, Z., Grünstäudl, T., Song, K., Holec, D., He, Y., Mayrhofer, P. H. & Bartosik, M., Sept 2021, In: Materials and Design. 207.2021, September, p. 1-10 109844.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Direct observation of nanocrystal-induced enhancement of tensile ductility in a metallic glass composite

    Gammer, C., Rentenberger, C., Beitelschmidt, D., Minor, A. M. & Eckert, J., 9 Jul 2021, In: Materials and Design. 209.2021, 1 November, 6 p., 109970.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Observations of crystal strains in filler and QI particles through TEM examination – Effect of processing and grain size

    Arregui-Mena, J. D., Worth, R. N., Tunes, M. & Edmondson, P. D., Jun 2021, In: Materials and Design. 204.2021, June, 7 p., 109673.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Assessment of grain boundary cohesion of technically pure and boron micro-doped molybdenum via meso-scale three-point-bending experiments

    Jakob, S., Hohenwarter, A., Lorich, A., Knabl, W., Pippan, R., Clemens, H. & Maier-Kiener, V., 24 May 2021, In: Materials and Design. 207.2021, September, 8 p., 109848.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Machine learning assisted calibration of a ductile fracture locus model

    Baltic, S., Asadzadeh, M. Z., Hammer, P., Magnien, J., Gänser, H. P., Antretter, T. & Hammer, R., May 2021, In: Materials and Design. 203.2021, May, 15 p., 109604.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Enhanced fracture toughness in ceramic superlattice thin films: On the role of coherency stresses and misfit dislocations

    Wagner, A., Holec, D., Mayrhofer, P. H. & Bartosik, M., Apr 2021, In: Materials and Design. 2021, 202, 10 p., 109517.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Strength ranking for interfaces between a TiN hard coating and microstructural constituents of high speed steel determined by micromechanical testing

    Gsellmann, M., Klünsner, T., Mitterer, C., Krobath, M., Wurmshuber, M., Leitner, H., Ecker, W., Marsoner, S., Maier-Kiener, V., Kiener, D. & Ressel, G., 31 Mar 2021, In: Materials and Design. 204.2021, June, 11 p., 109690.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Adhesion evaluation of thin films to dielectrics in multilayer stacks: A comparison of four-point bending and stressed overlayer technique.

    Lassnig, A., Putz, B., Hirn, S., Többens, D., Mitterer, C. & Cordill, M. J., 15 Feb 2021, In: Materials and Design. 200, 15 February, 8 p., 109451.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    The MoN–TaN system: Role of vacancies in phase stability and mechanical properties

    Klimashin, F., Lobmaier, L., Koutná, N., Holec, D. & Mayerhofer, P. H., 9 Feb 2021, In: Materials and Design. 202.2021, April, 12 p., 109568.

    Research output: Contribution to journal › Article › Research › peer-review

  52. E-pub ahead of print

    Laser powder bed fusion of an engineering intermetallic TiAl alloy

    Schimbäck, D., Braun, J., Leichtfried, G., Clemens, H. & Mayer, S., 22 Jan 2021, (E-pub ahead of print) In: Materials and Design. 201.2021, March, 11 p., 109506.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    An understanding of hydrogen embrittlement in nickel grain boundaries from first principles

    Mai, H. L., Cui, X.-Y., Scheiber, D., Romaner, L. & Ringer, S. P., 2021, In: Materials and Design. 2021, 212, p. 1-16

    Research output: Contribution to journal › Article › Research › peer-review

  54. 2020
  55. E-pub ahead of print

    Evolution of stress fields during crack growth and arrest in a brittle-ductile CrN-Cr clamped-cantilever analysed by X-ray nanodiffraction and modelling

    Meindlhumer, M., Brandt, L. R., Zalesak, J., Rosenthal, M., Hruby, H., Kopecek, J., Salvati, E., Mitterer, C., Daniel, R., Todt, J., Keckes, J. & Korsunsky, A. M., 28 Nov 2020, (E-pub ahead of print) In: Materials and Design. 2021, 198, 16 p., 109365.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Multi-scale interface design of strong and damage resistant hierarchical nanostructured materials

    Daniel, R., Meindlhumer, M., Zalesak, J., Baumegger, W., Todt, J., Ziegelwanger, T., Keckes, J., Mitterer, C. & Keckes, J., Nov 2020, In: Materials and Design. 196, November, p. 1-11 109169.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 Next
View graph of relations