Lehrstuhl für Gießereikunde (330)

Organisation: Lehrstuhl

Publikationen

  1. 2024
  2. Veröffentlicht

    Neue quantitative Testmethoden für eine realistische Bestimmung der Schichtbeständigkeit im Dauerformguss

    Berbic, M., Hofer-Hauser, P. & Gschwandtner, R., Dez. 2024, in: Gießerei-Rundschau. 71.2024, 4, S. 6-11 5 S.

    Publikationen: Beitrag in FachzeitschriftArtikelTransfer

  3. Veröffentlicht

    The influence local cooling to heat checking and crack formation in HPDC die inserts

    Hofer-Hauser, P., Gschwandtner, R. & Berbic, M., Dez. 2024, in: Livarski vestnik. 71.2024, 4, S. 176-192 16 S.

    Publikationen: Beitrag in FachzeitschriftArtikelTransfer

  4. Veröffentlicht

    Effect of local loading on microstructure and enhanced mechanical property of large complex castings prepared by Al–Si–Fe–Mn–Mg–Cu alloy during squeeze casting

    Meng, S., Gao, M., Liu, Y., Yang, L., Ma, H., LI, J., Wang, J. & Guan, R., 20 Nov. 2024, in: Journal of Materials Science & Technology. 200.2024, 20 November, S. 215-226 12 S.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  5. Veröffentlicht

    High-pressure-torsion-induced segregation, precipitation and grain refinement of Al-(Si, Mg and Cu) binary alloys

    Feng, M., Wu, Q., Xue, J., Luo, Z., Wang, Z., An, X., Liao, X., LI, J., Jin, S. & Sha, G., 10 Nov. 2024, in: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 199.2024, 10 November, S. 102-113 12 S.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  6. Veröffentlicht

    Achieving Superior Strength-ductility-conductivity Combination in TiB2p 6201 Composites via Particle Rotation and Sub-grain Refinement

    Zhao, K., Li, X., Liu, X., Shi, S., Guo, E., Kang, H., Hao, Z., LI, J., Zhang, Y., Chen, Z. & Wang, T., Juli 2024, in: Advanced engineering materials. 26.2024, 13, 13 S., 2400531.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  7. Veröffentlicht
  8. Veröffentlicht

    Improving the corrosion resistance of 7055 alloy by manipulating passivation film through trace addition of TiB2 nanoparticles

    Li, X., Wang, W., Wu, Y., Kang, H., Guo, E., LI, J., Chen, Z., Xu, Y. & Wang, T., 30 Mai 2024, in: Applied surface science. 656.2024, 30 May, 159722.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  9. Veröffentlicht

    Microstructure Evolution and Mechanical Properties at Ambient and Elevated Temperatures of in-situ TiB2/2219Al Matrix Composites During Cold Rolling

    Li, L., Zhou, D., Wei, C., Han, Z., LI, J., Kang, H., Guo, E., Zhang, Y., Chen, Z. & Wang, T., 7 Mai 2024, in: Metals and materials international. 30.2024, 10, S. 2791-2807 17 S.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  10. Veröffentlicht

    Investigation on the Duration of Action of Mg3N2 as a Grain Refiner for AZ80 Alloy

    Hösele, T., Neunteufl, E. & Li, J., 22 Apr. 2024, in: Metals. 14.2024, 4, 11 S., 485.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  11. Veröffentlicht

    Elucidating effects of Eu and P on solidification and precipitation of Al-7Si-0.3Mg based alloys refined by Ta and TiB2

    Spáčil, I., Gehringer, D., Holec, D., Albu, M. & LI, J., 25 März 2024, in: Journal of alloys and compounds. 978.2024, 25 March, 16 S., 173343.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  12. Veröffentlicht

    Agglomerating behavior of in-situ TiB2 particles and strength-ductility synergetic improvement of in-situ TiB2p/7075Al composites through ultrasound vibration

    Wu, Y., Li, L., Kang, H., Guo, E., LI, J., Du, G., Chen, Z. & Wang, T., Feb. 2024, in: Materials characterization. 208.2024, February, 10 S., 113652.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  13. Veröffentlicht

    Cavitation-induced particle engulfment via enhancing particle-interface interaction in solidification

    Zhao, K., Li, X., Liu, X., Guo, E., Kang, H., Hao, Z., LI, J., Zhang, Y., Chen, Z. & Wang, T., Feb. 2024, in: Ultrasonics sonochemistry. 103.2024, February, 10 S., 106801.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  14. Veröffentlicht

    Microstructure evolution of Al-Cu-Mg based alloy during rolling and annealing

    Moradizadeh, A., 2024

    Publikationen: Thesis / Studienabschlussarbeiten und HabilitationsschriftenMasterarbeit

  15. Veröffentlicht

    Rheocasting von Aluminium-Silizium-Legierungen: der RheoMetal Prozess im Fokus

    Stoisser, T., 2024

    Publikationen: Thesis / Studienabschlussarbeiten und HabilitationsschriftenMasterarbeit

  16. 2023
  17. Veröffentlicht

    Revealing nucleation kinetics of entrained eutectic Si droplets in high purity melt spun Al-5Si based alloys with additions of Ta, TiB2, Eu and P

    Spáčil, I. & LI, J., 15 Dez. 2023, in: Journal of alloys and compounds. 968.2023, 15 December, 14 S., 172032.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  18. Veröffentlicht

    Silicon Poisoning and Effects of Tantalum on AlSi Alloys

    Pammer, M., Pölzl, J. & LI, J., 21 Nov. 2023, in: Metals. 13.2023, 12, 11 S., 1917.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  19. Elektronische Veröffentlichung vor Drucklegung.

    Elucidating the evolution of long-period stacking ordered phase and its effect on deformation behavior in as-cast Mg-6Gd-1Zn-0.6Zr alloy

    Lee, S., Park, Y., Go, J., Kim, Y. M., Sohn, S. S., LI, J. & Choi, P.-P., 9 Sept. 2023, (Elektronische Veröffentlichung vor Drucklegung.) in: Journal of magnesium and alloys. 11.2023, 8, S. 2801-2810 10 S.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  20. Veröffentlicht

    Improving the stress corrosion resistance of 7075 matrix composites through combination of nanoparticle incorporation and retrogression re-aging treatment

    Li, S., Wu, Y., Wang, W., Wang, X., Kang, H., Guo, E., LI, J., Xu, Y., Chen, Z. & Wang, T., Aug. 2023, in: Materials Today Communications. 36.2023, August, 10 S., 106639.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  21. Veröffentlicht

    Revealing effects of solute Ta on solidification and precipitation of Al-7Si-0.3Mg based alloys

    Spacil, I., Holec, D., Albu, M. & LI, J., Aug. 2023, in: Materialia. 30.2023, August, 17 S., 101846.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  22. Elektronische Veröffentlichung vor Drucklegung.

    Decoupling electroplasticity by temporal coordination design of pulse current loading and straining

    Li, H., Jin, F., Zhang, M., Ding, J., Bian, T., LI, J., Ma, J., Zhang, L. & Wang, Y., 10 Juli 2023, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 881.2023, 10 August, 17 S., 145435.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  23. Veröffentlicht

    Effect of Ca and P on the Size and Morphology of Eutectic Mg2Si in High-Purity Al-Mg-Si Alloys

    Zarif, M. Z., Spacil, I., Pabel, T., Schumacher, P. & LI, J., 17 Apr. 2023, in: Metals : open access journal . 13.2023, 4, 16 S., 784.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  24. Veröffentlicht

    Two-Phase Flow Coordination Characteristics of H62 Brass Alloy Prepared by Up-Drawing Continuous Casting

    Li, B., Fu, Q., Yu, R., Lin, Z., Wang, J., Wang, X., Guan, R. & LI, J., 15 März 2023, in: Metals : open access journal . 13.2023, 3, 12 S., 599.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  25. Veröffentlicht

    Multiscale microstructures, mechanical properties and electrical conductivity of in-situ dual-size TiB2 particles reinforced 6201 aluminum matrix composites

    Zhao, K., Liu, X., Fang, Y., Guo, E., Kang, H., Hao, Z., LI, J., Du, G., Liu, L., Chen, Z. & Wang, T., 7 März 2023, in: Journal of Materials Research and Technology. 23.2023, March-April, S. 5459-5473 15 S.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  26. Veröffentlicht

    A Comparison of Microstructure and Casting Defects of Rheocasting and Thixocasting Al-Si-Mg Alloy

    Li, J., Spacil, I., Winklhofer, J., Hofstätter, F. & Griesebner, S., 2023, Solid State Phenomena. Trans Tech Publications, S. 61-66 6 S. (Solid State Phenomena; Band 347).

    Publikationen: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Buch/SammelbandForschung

  27. Veröffentlicht

    A comparison of microstructure and casting defects of rheocasting and thixocasting Al-Si-Mg alloys

    LI, J., Spáčil, I., Winklhofer, J., Hofstätter, F. & Griesebner, S., 2023, Solid State Phenomena. Band 347. S. 61-66 (Solid State Phenomena).

    Publikationen: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Buch/SammelbandForschung

  28. Veröffentlicht
  29. Veröffentlicht

    Effect of Mn addition on microstructure, mechanical properties and die soldering of rheocasting Al-7Si-0.3Mg alloys

    LI, J., Spáčil, I., Winklhofer, J., Hofstätter, F. & Griesebner, S., 2023, Solid State Phenomena. Band 347. S. 67-73 7 S. (Solid State Phenomena).

    Publikationen: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Buch/SammelbandForschung

  30. Veröffentlicht

    Einfluss von Nickel auf die Mikrostruktur und die mechanischen Eigenschaften von AlSi-Legierungen

    Moritsch, P., 2023

    Publikationen: Thesis / Studienabschlussarbeiten und HabilitationsschriftenMasterarbeit

  31. Veröffentlicht
  32. Veröffentlicht

    Influence of trace solutes on the grain refinement and modification of Al-Si based alloys

    Spáčil, I., 2023

    Publikationen: Thesis / Studienabschlussarbeiten und HabilitationsschriftenDissertation

  33. Veröffentlicht

    Optimierte Schutzgasgemische für den Magnesium-Schmelzbetrieb

    Sipek, F., Liepert, P., Zengerer, C., Schindelbacher, G., Hofer-Hauser, P. & Schumacher, P., 2023, in: Gießerei-Rundschau. 70.2023, 2, S. 24-28 5 S.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung

  34. Veröffentlicht

    Precipitation processes of Al-1.7at%Cu and the influence of Au micro-alloying studied by dilatometry

    Brumbauer, F., Brossmann, U., Enzinger, R., LI, J., Sprengel, W. & Würschum, R., 2023, in: Journal of alloys and compounds. 960.2023, 15 October, 8 S., 170699.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  35. 2022
  36. Veröffentlicht

    Elucidation of formation and transformation mechanisms of Ca-rich Laves phase in Mg-Al-Ca-Mn alloys

    LI, J., Zhou, X., Breen, A., Peng, Z., Su, J., Kürnsteiner, P., Correa, M. J. D., Chwałek, M. L., Wang, H., Holec, D., Mayer, J. & Dehm, G., 20 Dez. 2022, in: Journal of alloys and compounds. 928.2022, 20 December, S. 1-12 12 S., 167177.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  37. Veröffentlicht

    Ultrasound-Assisted Solidification of a Cu–Cr Alloy

    Zhang, S., Kang, H., Cheng, M., Chen, Z., Wang, Z., Guo, E., LI, J. & Wang, T., Dez. 2022, in: Acta metallurgica Sinica (English letters). 35.2022, 12, S. 2082-2088 7 S.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  38. Veröffentlicht

    Formation mechanism of TiB2 nanoparticles and development of TiB2p/6201 nanocomposites as a neoteric conducting material

    Zhao, K., Liu, M., Kang, H., Guo, E., Li, J., Liu, L., Chen, Z. & Wang, T., 25 Sept. 2022, in: Journal of alloys and compounds. 916.2022, 25 September, 9 S., 165461.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  39. Elektronische Veröffentlichung vor Drucklegung.

    Elucidating dynamic precipitation and yield strength of rolled Mg-Al-Ca-Mn alloy

    LI, J., Zhou, X., Su, J., Breitbach, B., Chwałek, M. L., Wang, H. & Dehm, G., 14 Sept. 2022, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 856.2022, 20 October, 17 S., 143898.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  40. Veröffentlicht

    Elucidating thermal conductivity mechanism of Al-9Si based alloys with trace transition elements (Mn, Cr, V)

    Zhou, Y., Zhang, X., Zhong, G., Zhang, J., Yang, Y., Kang, D., Li, H., Jie, W., Schumacher, P. & LI, J., 25 Juni 2022, in: Journal of alloys and compounds. 907.2022, 25 June, 13 S., 164446.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  41. Veröffentlicht

    Influence of Zn and/or Ag additions on microstructure and properties of Al-Mg based alloys

    Guo, C., Zhang, H. & LI, J., 25 Mai 2022, in: Journal of alloys and compounds. 904.2022, 25 May, 12 S., 163998.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  42. Veröffentlicht

    Ultrasound-assisted dispersion of TiB2 nanoparticles in 7075 matrix hybrid composites

    Wu, Y., Liu, B., Kang, H., Guo, E., LI, J., Du, G. & Wang, T., 18 Apr. 2022, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 840.2022, 18 April, 9 S., 142958.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  43. Veröffentlicht

    Effects of Si and Sr elements on solidification microstructure and thermal conductivity of Al–Si-based alloys

    Zhang, X., Zhou, Y., Zhong, G., Zhang, J., Chen, Y., Jie, W., Schumacher, P. & LI, J., 8 März 2022, in: Journal of materials science. 57.2022, March, S. 6428-6444 17 S.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  44. Veröffentlicht

    Effect of a Solute Ta on Grain Refinement of Al-7Si-0.3Mg Based Alloys

    Spacil, I., Holec, D., Schumacher, P. & LI, J., 10 Jan. 2022, Solid State Phenomena. Band 327.2022. S. 54-64 (Solid State Phenomena).

    Publikationen: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Buch/SammelbandForschung

  45. Veröffentlicht

    Effect of the Mg3N2 Sub-Micron Particle on the Grain Refinement of AZ80 Alloy

    LI, J., Pammer, M., Neunteufl, E. & Schumacher, P., 10 Jan. 2022, Solid State Phenomena. Band 327.2022. S. 45-53 (Solid State Phenomena).

    Publikationen: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Buch/SammelbandForschung

  46. Veröffentlicht

    Using Recycled Materials for Semi-Solid Processing of Al-Si-Mg Based Alloys

    LI, J., Zhang, X., Winklhofer, J., Griesebner, S., Oberdorfer, B., Jie, W. & Schumacher, P., 10 Jan. 2022, Solid State Phenomena. January Aufl. Trans Tech Publications, Band 327.2022. S. 207-222 16 S. (Solid State Phenomena).

    Publikationen: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Buch/SammelbandForschung

  47. Veröffentlicht

    Effect of Solute Ta on Grain Refinement of Al-7Si-0.3Mg Based Alloys

    Spacil, I., Holec, D., Schumacher, P. & Li, J., 2022, Semi-Solid of Alloys and Composites XVI - Selected peer-reviewed full text papers from the 16th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2021. Li, J. & Rassili, A. (Hrsg.). Trans Tech Publications, S. 54-64 11 S. (Solid State Phenomena; Band 327 SSP).

    Publikationen: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Konferenzband

  48. Veröffentlicht

    In einer Woche zum eigenschaftsoptimierten Gussteil

    Koppensteiner, E., Brait, M., Schindelbacher, G. & Schumacher, P., 2022, in: Giesserei. 109.2022, 7, S. 53-57 5 S.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung

  49. Veröffentlicht

    Siliziumvergiftung und der Einfluss von Tantal auf die Kornfeinung von AlSi-Legierungen

    Pammer, M., 2022

    Publikationen: Thesis / Studienabschlussarbeiten und HabilitationsschriftenMasterarbeit

  50. Veröffentlicht

    Solidification microstructure control in Al-7Si-0.4Mg (wt. %) alloys for improving fatigue properties

    Razavi, S., 2022

    Publikationen: Thesis / Studienabschlussarbeiten und HabilitationsschriftenMasterarbeit

  51. Veröffentlicht

    Temperature and Stress Distribution during Quenching of Al-7Si-0.4Mg: Simulation and Experimental Verification

    Kösemek, C., 2022

    Publikationen: Thesis / Studienabschlussarbeiten und HabilitationsschriftenMasterarbeit

  52. 2021
  53. Veröffentlicht

    Mit innovativen Methoden und Rapid Prototyping zum optimierten Gussteil in einer Woche

    Koppensteiner, E., Brait, M., Schindelbacher, G. & Schumacher, P., Dez. 2021, in: Gießerei-Rundschau. 68.2021, 4, S. 14-18 5 S.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung

  54. Veröffentlicht

    Stainless steel reveals an anomaly in thermal expansion behavior of severely deformed materials

    Renk, O., Enzinger, R. J., Gammer, C., Scheiber, D., Oberdorfer, B., Tkadletz, M., Stark, A., Sprengel, W., Pippan, R., Eckert, J., Romaner, L. & Ruban, A., 30 Nov. 2021, in: Physical review materials . 5.2021, 11, 113609.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Vorherige 1 2 3 4 5 6 7 8 9 Nächste