Multi-method characterization approach to facilitate a strategy to design mechanical and electrical properties of sintered copper

Wijaya, A., Eichinger, B., Chamasemani, F. F., Sartory, B., Hammer, R., Maier-Kiener, V., Kiener, D., Mischitz, M. & Brunner, R., 28 Sept. 2020, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials and Design. 2021, 197, 11 S., 109188.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Open-cell tungsten nanofoams: Scaling behavior and structural disorder dependence of Young's modulus and flow strength

Zhao, M., Schlueter, K., Wurmshuber, M., Reitgruber, M. & Kiener, D., 26 Sept. 2020, in: Materials and Design. 2021, 197, 12 S., 109187.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Nanoscale stress distributions and microstructural changes at scratch track cross-sections of a deformed brittle-ductile CrN-Cr bilayer

Meindlhumer, M., Zalesak, J., Ecker, W., Rosenthal, M., Niese, S., Gawlitza, P., Hruby, H., Mitterer, C., Daniel, R., Keckes, J. & Todt, J., 5 Aug. 2020, in: Materials & design. 195.2020, October, 16 S., 109023.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Warm-forming of pre-aged Al-Zn-Mg-Cu alloy sheet

Österreicher, J. A., Tunes, M. A., Grabner, F., Arnoldt, A., Kremmer, T., Pogatscher, S. & Schlögl, C. M., Aug. 2020, in: Materials and Design. 193, S. 108837 1 S., 108837.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

An analytical solution for the correct determination of crack lengths via cantilever stiffness

Alfreider, M., Kolitsch, S., Wurster, S. & Kiener, D., 27 Juni 2020, in: Materials and Design. 194.2020, September, 3 S., 108914.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Fracture properties of thin film TiN at elevated temperatures

Buchinger, J., Löfler, L., Ast, J., Wagner, A., Chen, Z., Michler, J., Zhang, Z., Mayrhofer, P. H., Holec, D. & Bartosik, M., 13 Juni 2020, in: Materials & design. 194.2020, September, S. 1-10 10 S., 108885.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Room temperature recovery of cryogenically deformed aluminium alloys

Gruber, B., Grabner, F., Falkinger, G., Schökel, A., Spieckermann, F., Uggowitzer, P. J. & Pogatscher, S., 23 Mai 2020, in: Materials & design. 193.2020, August, 108819.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Thermally activated deformation mechanisms and solid solution softening in W-Re alloys investigated via high temperature nanoindentation

Kappacher, J., Leitner, A., Kiener, D., Clemens, H. & Maier-Kiener, V., 1 Apr. 2020, in: Materials and Design. 189.2020, April, 6 S., 108499.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructures, mechanical properties and deformation of near-rapidly solidified low-density Fe-20Mn-9Al-1.2C-xCr steels

Zhang, J., Hu, C., Zhang, Y., LI, J., Song, C. & Zhai, Q., 15 Jan. 2020, in: Materials and Design. 186.2020, 15 January, 13 S., 108307.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of annealing on microstructure and mechanical properties of ultrafine-grained Ti45Nb

Völker, B., Maier-Kiener, V., Werbach, K., Müller, T., Pilz, S., Calin, M., Eckert, J. & Hohenwarter, A., 5 Okt. 2019, in: Materials and Design. 179.2019, 5 October, 11 S., 107864.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of crystal orientation and Berkovich tip rotation on the mechanical characterization of grain boundaries in molybdenum

Jakob, S., Leitner, A., Lorich, A., Eidenberger-Schober, M., Knabl, W., Pippan, R., Clemens, H. & Maier-Kiener, V., 2 Juli 2019, in: Materials & design. 182.2019, 15 November, S. 1-9 9 S., 107998.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Age-hardening of high pressure die casting AlMg alloys with Zn and combined Zn and Cu additions

Stemper, L., Mitas, B., Kremmer, T., Otterbach, S., Uggowitzer, P. J. & Pogatscher, S., 9 Juni 2019, in: Materials & design. 181.2019, 11 S., 107927.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Deformation behavior of aluminum pillars produced by Xe and Ga focused ion beams: Insights from strain rate jump tests

Xiao, Y., Maier-Kiener, V., Michler, J., Spolenak, R. & Wheeler, J. M., 7 Juni 2019, in: Materials and Design. 181.2019, November, 11 S., 107914 .

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Structure-stress relationships in nanocrystalline multilayered Al0.7Cr0.3N/Al0.9Cr0.1N coatings studied by cross-sectional X-ray nanodiffraction

Klima, S., Jäger, N., Hruby, H., Mitterer, C., Keckes, J., Burghammer, M. & Daniel, R., 15 Mai 2019, in: Materials and Design. 170, S. 1-9 107702.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructural origins of the high mechanical damage tolerance of NbTaMoW refractory high-entropy alloy thin films

Tunes, M. A. & Vishnyakov, V. M., 9 Mai 2019, in: Materials and Design. 170.2019, May, 10 S., 107692.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Deformation Behavior of Designed Dual-Phase CuZr Metallic Glasses

Peng, C. X., Sopu, D., Cheng, Y., Song, K. K., Wang, S., Eckert, J. & Wang, L., 16 Feb. 2019, in: Materials and Design. 168.2019, 15 April, 107662.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Anisotropy of fracture toughness in nanostructured ceramics controlled by grain boundary design

Daniel, R., Meindlhumer, M., Baumegger, W., Todt, J., Zalesak, J., Ziegelwanger, T., Mitterer, C. & Keckes, J., 2019, in: Materials and Design. 161.2019, January, S. 80-85 6 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Austenite decomposition and carbon partitioning during quenching and partitioning heat treatments studied via in-situ X-ray diffraction

Ebner, S., Suppan, C., Stark, A., Schnitzer, R. & Hofer, C., 2019, in: Materials and Design. 178.2019, September, 107862.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Impact of interfaces on the radiation response and underlying defect recovery mechanisms in nanostructured Cu-Fe-Ag

Wurmshuber, M., Frazer, D., Bachmaier, A., Wang, Y., Hosemann, P. & Kiener, D., 1 Nov. 2018, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials and Design. 160.2018, 15 December, S. 1148-1157 10 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Fracture mechanics of micro samples: Fundamental considerations

Pippan, R., Wurster, S. & Kiener, D., 5 Sept. 2018, in: Materials and Design. 159.2018, 5 December, S. 252-267

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Incipient plasticity and surface damage in LiTaO₃ and LiNbO₃ single crystals

Gruber, M., Leitner, A., Kiener, D., Supancic, P. & Bermejo, R., 5 Sept. 2018, in: Materials and Design. 153, S. 221-231 11 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Scratch induced thin film buckling for quantitative adhesion measurements

Kleinbichler, A., Pfeifenberger, M. J., Zechner, J., Wöhlert, S. & Cordill, M., 29 Mai 2018, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials and Design. 115.2018, 5 October, S. 203-211 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Essential refinements of spherical nanoindentation protocols for the reliable determination of mechanical flow curves

Leitner, A., Maier-Kiener, V. & Kiener, D., 15 Mai 2018, in: Materials and Design. 146.2018, May, S. 69-80 12 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

In-situ elastic-plastic fracture mechanics on the microscale by means of continuous dynamical testing

Alfreider, M., Kozic, D., Kolednik, O. & Kiener, D., 27 März 2018, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials and Design. 148.2018, 15 June, S. 177-187 11 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Stability and elasticity of metastable solid solutiions and superlattices in the MoN-TaN system: First-principles calculations

Koutná, N., Holec, D., Friák, M., Mayrhofer, P. H. & Šob, M., 14 Feb. 2018, in: Materials and Design. 144.2018, April, S. 310-322 13 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

How grain boundary chemistry controls the fracture mode of molybdenum

Leitner, K., Scheiber, D., Jakob, S., Primig, S., Clemens, H., Povoden-Karadeniz, E. & Romaner, L., 9 Jan. 2018, in: Materials and Design. 142.2018, 15 March, S. 36-43 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Bimetallic diffusion modeling and temperature regulation during ball milling

Aureli, M., Doumanidis, C. C., Gunduz, I. E., Suliman Hussien, A. G., Liao, Y., Kostoglou, N., Rebholz, C. & Doumanidis, C. C., 2018, in: Materials and Design. S. 233-243

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Nanoscale residual stress depth profiling by focused ion beam milling and eigenstrain analysis

Korsunsky, A. M., Salvati, E., Lunt, A. G. J., Sui, T., Mughal, Z. M., Daniel, R., Keckes, J., Bemporad, E. & Sebastiani, M., 2018, in: Materials and Design. 145, S. 55-64

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Novel combustion synthesis of carbon foam‑aluminum fluoride nanocomposite materials

Kostoglou, N., Gunduz, I. E., Isik, T., Ortalan, V., Constantinides, G., Kontos, A. G., Steriotis, T., Ryzhkov, V., Bousser, E., Matthews, A., Doumanidis, C. C., Mitterer, C. & Rebholz, C., 2018, in: Materials and Design. 144, S. 222-228

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Rapid and partial crystallization to design ductile CuZr-based bulk metallic glass composites

Song, K. K., Han, X., Pauly, S., Qin, Y. S., Kosiba, K., Peng, C. X., Gong, J. H., Chen, P. X., Wang, L., Sarac, B., Ketov, S., Mühlbacher, M., Spieckermann, F., Kaban, I. & Eckert, J., 2018, in: Materials and Design. 139.2018, 5 February, S. 132-140 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Thermostructural observation and adaptive control of fractal structure in ball-milled materials

Kostoglou, N., Aureli, M., Alzaabi, A. S. M., Suliman Hussien, A. G., Doumanidis, C. C., Jaffar, S. M., Gunduz, I. E., Rebholz, C., Liao, Y. & Doumanidis, C. C., 2018, in: Materials and Design. S. 772-782

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

High resolution residual stress gradient characterization in W/TiN-stack on Si(100): Correlating in-plane stress and grain size distributions in W sublayer

Hammer, R., Todt, J., Keckes, J., Sartory, B., Parteder, G., Kraft, J. & Defregger, S., 15 Okt. 2017, in: Materials and Design. 132.2017, 15 October, S. 72-78 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Design and control of microstructure and texture by thermomechanical processing of a multi-phase TiAl alloy

Spörk, P., Staron, P., Maawad, E., Schell, N., Klose, J., Clemens, H. & Mayer, S., 5 Okt. 2017, in: Materials and Design. 131.2017, 5 October, S. 286-296 11 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Phase evolution and carbon redistribution during continuous tempering of martensite studied with high resolution techniques

Vieweg, A., Povoden-Karadeniz, E., Ressel, G., Prevedel, P., Wojcik, T., Mendez Martin, F., Stark, A., Keckes, J. & Kozeschnik, E., 4 Okt. 2017, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials and Design. 136.2017, 15 December, S. 214-222 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

On grain boundary segregation in molybdenum materials

Leitner, K., Felfer, P. J., Holec, D., Cairney, J. M., Knabl, W., Lorich, A., Clemens, H. & Primig, S., 11 Sept. 2017, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials and Design. 135.2017, 5 December, S. 204-212 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Processing of Ti-5553 with improved mechanical properties via an in-situ heat treatment combining selective laser melting and substrate plate heating

Schwab, H., Bönisch, M., Giebeler, L., Gustmann, T., Eckert, J. & Kühn, U., Sept. 2017, in: Materials and Design. 130.2017, 15 September, S. 83-89 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The use of femtosecond laser ablation as a novel tool for rapid micro-mechanical sample preparation

Pfeifenberger, M. J., Mangang, M., Wurster, S., Reiser, J., Hohenwarter, A., Pfleging, W., Kiener, D. & Pippan, R., 5 Mai 2017, in: Materials and Design. 121.2017, 5 May, S. 109-118 10 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Micro-patterning by thermoplastic forming of Ni-free Ti-based bulk metallic glasses

Bera, S., Sarac, B., Balakin, S., Ramasamy, P., Stoica, M., Calin, M. & Eckert, J., Apr. 2017, in: Materials and Design. 120.2017, 15 April, S. 204-211 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of testing orientation on mechanical properties of Ti45Nb deformed by high pressure torsion

Völker, B., Jäger, N., Calin, M., Zehetbauer, M. J., Eckert, J. & Hohenwarter, A., 15 Jan. 2017, in: Materials & design. 114.2017, 15 January, S. 40-46 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Nanoindentation testing as a powerful screening tool for assessing phase stability of nanocrystalline high-entropy alloys

Maier-Kiener, V., Schuh, B., George, E. P., Clemens, H. & Hohenwarter, A., 2017, in: Materials and Design. 115.2017, 5 February, S. 479-485 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Hardening of Al-Mg-Si alloys: Effect of trace elements and prolonged natural aging

Werinos, M., Antrekowitsch, H., Ebner, T., Prillhofer, R., Uggowitzer, P. & Pogatscher, S., 5 Okt. 2016, in: Materials & design. 107.2016, 5 October, S. 257-268 12 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and mechanical properties of the near-beta titanium alloy Ti-5553 processed by selective laser melting

Schwab, H., Palm, F., Kühn, U. & Eckert, J., 5 Sept. 2016, in: Materials & design. 105.2016, 5 September, S. 75-80 6 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Fracture toughness enhancement of brittle nanostructured materials by spatial heterogeneity: A micromechanical proof for CrN/Cr and TiN/SiOx multilayers

Daniel, R., Meindlhumer, M., Zalesak, J., Sartory, B., Zeilinger, A., Mitterer, C. & Keckes, J., 13 Mai 2016, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials & design. 104.2016, 15 August, S. 227-234 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and metallic ion release of pure titanium and Ti-13Nb-13Zr alloy processed by high pressure torsion

Dimić, I., Cvijović-Alagić, I., Völker, B., Hohenwarter, A., Pippan, R., Veljović, D., Rakin, M. & Bugarski, B., 5 Feb. 2016, in: Materials & design. 91.2016, 5 February, S. 340-347 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Wetting behaviour of Cu-Ga alloys on 304L steel

Silze, F., Wiehl, G., Kaban, I., Wendrock, H., Gemming, T., Kühn, U., Eckert, J. & Pauly, S., 5 Feb. 2016, in: Materials & design. 91.2016, 5 February, S. 11-18 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and properties of FeCrMoVC tool steel produced by selective laser melting

Sander, J., Hufenbach, J. K., Giebeler, L., Wendrock, H., Kühn, U. & Eckert, J., 5 Jan. 2016, in: Materials & design. 89.2016, 5 January, S. 335-341 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Cross-sectional stress distribution in AlxGa1-xN heterostructure on Si(111) substrate characterized by ion beam layer removal method and precession electron diffraction

Reisinger, M., Zalesak, J., Daniel, R., Tomberger, M., Weiss, J. K., Darbal, A. D., Petrenec, M., Zechner, J., Daumiller, I., Ecker, W., Sartory, B. & Keckes, J., 2016, in: Materials and Design. 106, S. 476-481 6 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Few-step synthesis, thermal purification and structural characterization of porous boron nitride nanoplatelets

Kostoglou, N., Lukovic, J., Babic, B., Matovic, B., Photiou, D., Constantinides, G., Polychronopoulou, K., Ryzhkov, V., Großmann, B., Mitterer, C. & Rebholz, C., 2016, in: Materials & design. 110, S. 540-548 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

On crack propagation in the welded polyolefin pipes with and without the presence of weld beads

Mikula, J., Hutař, P., Nezbedová, E., Lach, R., Arbeiter, F., Ševčík, M., Pinter, G., Grellmann, W. & Náhlík, L., 15 Dez. 2015, in: Materials & design. 87, S. 95-104 10 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)