Michael Burtscher

1 - 33 out of 33Page size: 50

Research output

  1. 2025
  2. Published

    Phase stability and enhanced mechanical properties of nanocrystalline PVD CrCu coatings

    Burtscher, M., Kainz, C., Dorner, P., Fellner, S., Terziyska, V., Alfreider, M. & Kiener, D., 8 Jan 2025, In: Journal of Materials Research and Technology. 35.2025, March-April, p. 369-378 10 p., 35.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2024
  4. Published

    Assessing the fracture toughness in Tungsten-based nanocomposites: A micro-mechanical approach

    Schmuck, K. S., Burtscher, M., Alfreider, M. & Kiener, D., 6 Nov 2024, In: Materials and Design. 247.2024, November, 11 p., 113433.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Chemical vapor deposited TiCN/TiC multilayer coatings: On the interplay between coating architecture and mechanical properties

    Kainz, C., Tkadletz, M., Maier-Kiener, V., Völker, B., Burtscher, M., Waldl, H., Schiester, M., Thurner, J., Czettl, C. & Schalk, N., 14 Sept 2024, In: International journal of refractory metals & hard materials. 125.2024, December, 6 p., 106890.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    On the fatigue crack growth behavior of nanocrystalline CrMnFeCoNi

    Pillmeier, S., Burtscher, M., Laplanche, G., Pippan, R., Eckert, J. & Hohenwarter, A., 31 Jul 2024, In: International Journal of Fatigue. 188.2024, November, 11 p., 108530.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Mechanical processing and thermal stability of the equiatomic high entropy alloy TiVZrNbHf under vacuum and hydrogen pressure

    Schweiger, L., Römer, F., Gizer, G., Burtscher, M., Kiener, D., Pistidda, C., Schökel, A., Spieckermann, F. & Eckert, J., 10 Jun 2024, In: Applied physics letters. 124.2024, 24, 241903.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Micro-Mechanical Fracture Investigations on Grain Size Tailored Tungsten-Copper Nanocomposites

    Schmuck, K. S., Burtscher, M., Alfreider, M., Wurmshuber, M. & Kiener, D., 9 Jan 2024, In: JOM. 76.2024, 5, p. 2302-2314 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. 2023
  10. Published

    Deformation and failure behavior of nanocrystalline WCu

    Burtscher, M., Alfreider, M., Kainz, C. & Kiener, D., 6 Nov 2023, In: Materials Science and Engineering A. 887.2023, 6 November, 9 p., 145760.

    Research output: Contribution to journal › Article › Research › peer-review

  11. E-pub ahead of print

    From unlikely pairings to functional nanocomposites: FeTi–Cu as a model system

    Schweiger, L., Kiener, D., Burtscher, M., Schafler, E., Mori, G. K., Spieckermann, F. & Eckert, J., 17 Oct 2023, (E-pub ahead of print) In: Materials today advances. 2023, 20, 13 p., 100433.

    Research output: Contribution to journal › Article › Research › peer-review

  12. E-pub ahead of print

    Precipitation behavior of hexagonal carbides in a C containing intermetallic γ-TiAl based alloy

    Burtscher, M., Weißensteiner, I., Wartbichler, R., Kirchheimer, K., Bernhard, C., Kiener, D. & Clemens, H., 4 Oct 2023, (E-pub ahead of print) In: Journal of alloys and compounds. 2023, 969, 7 p., 172400.

    Research output: Contribution to journal › Article › Research › peer-review

  13. E-pub ahead of print

    Effect of wire-arc directed energy deposition on the microstructural formation and age-hardening response of the Mg-9Al-1Zn (AZ91) alloy

    Graf, G., Spörk-Erdely, P., Maawad, E., Burtscher, M., Kiener, D., Clemens, H. & Klein, T., 30 Jun 2023, (E-pub ahead of print) In: Journal of magnesium and alloys. 2023, 11, p. 1944-1958 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. E-pub ahead of print

    On the stability of Ti(Mn,Al)2 C14 Laves phase in an intermetallic Ti–42Al–5Mn alloy

    Graf, G., Seyffertitz, M., Spörk-Erdely, P., Clemens, H., Stark, A., Hatzenbichler, L., Holec, D., Burtscher, M., Kiener, D., Li, X. & Liu, K., 11 Jun 2023, (E-pub ahead of print) In: Intermetallics. 2023, 161, 9 p., 107962.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Decomposition of CrN induced by laser-assisted atom probe tomography

    Waldl, H., Hans, M., Schiester, M., Primetzhofer, D., Burtscher, M., Schalk, N. & Tkadletz, M., Apr 2023, In: Ultramicroscopy. 246.2023, April, 8 p., 113673.

    Research output: Contribution to journal › Article › Research › peer-review

  16. E-pub ahead of print

    Small-scale fracture mechanical investigations on grain boundary doped ultrafine-grained tungsten

    Wurmshuber, M., Alfreider, M., Wurster, S., Burtscher, M., Pippan, R. & Kiener, D., 28 Mar 2023, (E-pub ahead of print) In: Acta Materialia. 2023, 250, 12 p., 118878.

    Research output: Contribution to journal › Article › Research › peer-review

  17. 2022
  18. Published

    Publisher Correction: In situ fracture observations of distinct interface types within a fully lamellar intermetallic TiAl alloy (Journal of Materials Research, (2021), 36, 12, (2465-2478), 10.1557/s43578-020-00088-z)

    Burtscher, M., Alfreider, M., Schmuck, K. S., Clemens, H., Mayer, S. & Kiener, D., 14 Nov 2022, In: Journal of Materials Research. 37.2021, p. 3855 1 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  19. Published

    Mechanical performance of doped W–Cu nanocomposites

    Wurmshuber, M., Burtscher, M., Doppermann, S., Bodlos, R., Scheiber, D., Romaner, L. & Kiener, D., 1 Nov 2022, In: Materials Science and Engineering A. 857.2022, 1 November, 12 p., 144102.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    In situ micromechanical analysis of a nano-crystalline W-Cu composite

    Burtscher, M., Alfreider, M., Kainz, C., Schmuck, K. S. & Kiener, D., Aug 2022, In: Materials and Design. 220.2022, August, 9 p., 110848.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Oxidation resistance of cathodic arc evaporated Cr0.74Ta0.26N coatings

    Kainz, C., Saringer, C., Burtscher, M., Tkadletz, M., Stark, A., Schell, N., Pohler, M., Czettl, C., Kiener, D. & Schalk, N., 1 Apr 2022, In: Scripta materialia. 211.2022, 1 April, 5 p., 114492.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Effect of the wire and arc additive manufacturing process on microstructure and aging behavior of a magnesium alloy studied by HEXRD

    Graf, G., Klein, T., Maawad, E., Burtscher, M., Kiener, D., Clemens, H. & Spörk-Erdely, P., 2022.

    Research output: Contribution to conference › Poster › Research

  23. Published

    Oxidation resistance of arc-evaporated Cr0.74Ta0.26N coatings

    Kainz, C., Saringer, C., Burtscher, M., Tkadletz, M., Stark, A., Schell, N., Pohler, M., Czettl, C., Kiener, D. & Schalk, N., 2022.

    Research output: Contribution to conference › Poster › Research

  24. 2021
  25. Published

    High-Temperature Nanoindentation of an Advanced Nano-Crystalline W/Cu Composite

    Burtscher, M., Zhao, M., Kappacher, J., Leitner, A., Wurmshuber, M., Pfeifenberger, M. J., Maier-Kiener, V. & Kiener, D., 3 Nov 2021, In: Nanomaterials. 11, 11, 14 p., 2951.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    In-situ fracture determination of a W-Cu nanocomposite

    Burtscher, M., Schmuck, K. S., Wurmshuber, M., Alfreider, M. & Kiener, D., 14 Sept 2021.

    Research output: Contribution to conference › Poster › Research

  27. 2020
  28. Published

    In situ fracture observations of distinct interface types within a fully lamellar intermetallic TiAl alloy

    Burtscher, M., Alfreider, M., Schmuck, K., Clemens, H., Mayer, S. & Kiener, D., 11 Nov 2020, In: Journal of Materials Research. 2021, 12, p. 2465-2478 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    An Advanced TiAl Alloy for High-Performance Racing Applications

    Burtscher, M., Klein, T., Lindemann, J., Lehmann, O., Fellmann, H., Güther, V., Clemens, H. & Mayer, S., 22 Oct 2020, In: Materials. 13.2020, 21, p. 1-14 14 p., 4720.

    Research output: Contribution to journal › Article › Research › peer-review

  30. 2019
  31. Published

    The creep behavior of a fully lamellar γ-TiAl based alloy

    Burtscher, M., Klein, T., Mayer, S., Clemens, H. & Fischer, F. D., 1 Nov 2019, In: Intermetallics. 114.2019, November, 9 p., 106611.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Mikrostrukturelle Charakterisierung einer pulvermetallurgisch hergestellten mehrphasigen TiAl-Legierung

    Burtscher, M., Pürstl, F., Schloffer, M., Mayer, S. & Clemens, H., 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 5, p. 210 - 214 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Optimierung von intermetallischen TiAl Legierungen in Hinblick auf die Erhöhung der Anwendungstemperatur

    Burtscher, M., 2019

    Research output: Thesis › Doctoral Thesis

  34. 2018
  35. Published

    H-carbide precipitation behaviour in a C-containing β-solidifying TiAl alloy

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Klein, T., Mayer, S. & Clemens, H., 2018.

    Research output: Contribution to conference › Poster › Research

  36. Published

    Investigation of the Precipitation Behavior of H-Carbides in a TiAl Alloy containing Carbon by means of in- and ex-situ Characterization

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 10, p. 693-703 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Mikrostrukturelle Charakterisierung einer pulvermetallurgisch hergestellten mehrphasigen TiAl-Legierung

    Burtscher, M., Pürstl, F., Schloffer, M., Mayer, S. & Clemens, H., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 151-156

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. 2017
  39. Published

    Untersuchungen des Ausscheidungsverhaltens von H-Karbiden in einer kohlenstoffhaltigen TiAl Legierung mittels in- und ex-situ Experimenten

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 2017, Praktische Metallographie Sonderband 51. p. 55-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. 2016
  41. Published

    Creep Behavior of a β-solidifying TiAl Alloy with Fully Lamellar Microstructure

    Burtscher, M., Klein, T., Mayer, S. & Clemens, H., 28 Nov 2016.

    Research output: Contribution to conference › Presentation › Research

  42. Published

    Microstructural and mechanical characterization of a hot-extruded TiAl alloy for high-performance racing applications

    Lehmann, O., Burtscher, M., Klein, T., Lindemann, J., Güther, V., Fellmann, H. & Clemens, H., 2016.

    Research output: Contribution to conference › Presentation › Research

  43. 2015
  44. Published

    Mikrostrukturelle und mechanische Charakterisierung von TiAl Rennsportventilen

    Burtscher, M., 2015

    Research output: Thesis › Diploma Thesis

View graph of relations

Latest Research Output

View more (33)