Florian Grün

1 - 392 out of 392Page size: 500

Research output

  1. 2025
  2. Published

    Wasserstoff als nachhaltiger Energieträger – Dimensionieren im Maschinenbau

    Grun, F., Oberreiter, P. & Renhart, P., 4 Mar 2025, 20. Kraftfahrzeug – Symposium - Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Hydrodynamic performance testing of artificial textures using a novel pin-on-disc test method

    Pusterhofer, M., Maier, M., Scharf, R., Haumer, F. & Grün, F., 17 Feb 2025, In: Frontiers in Mechanical Engineering. 11.2025, 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Impact of tensile specimen properties on hydrogen embrittlement testing using hollow specimens

    Oberreiter, P., Winter, G., Grun, F. & Drexler, A., 12 Feb 2025.

    Research output: Contribution to conference › Presentation › Research › peer-review

  5. Published

    Fatigue Assessment of Precorroded AlSi9Cu3 Specimens Incorporating Short Crack Propagation

    Oberreiter, P., Schönowitz, M., Maier, B. & Grün, F., 9 Feb 2025, In: Fatigue and Fracture of Engineering Materials and Structures. ??? Stand: 27. März 2025, ??? Stand: 27. März 2025, 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. 2024
  7. Published

    Development of a novel aerosol-lubricated ring-on-liner test methodology

    Gussmagg, J., Pusterhofer, M., Breitegger, M. & Grün, F., 31 Dec 2024, In: Tribologia : Finnish Journal of Tribology. 41.2024, 3-4, p. 49-51 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Investigation of fracture mechanical properties of a brass alloy with microstructural variations

    Klaushofer, M., Stoschka, M., Maier, B. & Grün, F., 25 Nov 2024, In: Engineering Fracture Mechanics. 311.2024, 25 November, 22 p., 110564.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Neue Ansätze zur Berücksichtigung des Korrosionseinflusses auf die Schwingfestigkeit von Aluminium-Bauteilen

    Schönowitz, M., Oberreiter, P., Maier, B. & Grun, F., 9 Oct 2024.

    Research output: Contribution to conference › Presentation › Research › peer-review

  10. Published

    Fatigue Life Assessment of Corroded AlSi10MgMn Specimens

    Schönowitz, M., Fladischer, S., Oberreiter, P., Maier, B., Grün, F. & Bauer-Troßmann, K., 5 Oct 2024, In: Metals : open access journal . 14.2024, 10, 20 p., 1135.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    An Investigation into the Optimal Dimple Geometry in a Single-Dimple Sliding Contact

    Scharf, R., Pusterhofer, M., Gussmagg, J. & Grün, F., 5 Sept 2024, In: Machines : open access journal . 12.2024, 9, 16 p., 622.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    FATIGUE LIMIT ASSESSMENT OF INTERACTING SMALL DEFECTS BY CYCLIC R-CURVE ANALYSIS

    Fladischer, S., Stoschka, M. & Grun, F., 26 Aug 2024.

    Research output: Contribution to conference › Abstract › peer-review

  13. Published

    EHD simulation study on the influence of measured ICE compression piston ring profiles on the lubrication film formation

    Gussmagg, J., Maier, M., Pusterhofer, M. & Grün, F., 20 Jul 2024, In: Tribology International. 199.2024, November, 10 p., 110015.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Emergence of Coated Piston Ring Scuffing Behavior on an Application-Oriented Tribological Model Test System

    Markut, T., Summer, F., Pusterhofer, M. & Grün, F., 14 Jun 2024, In: Lubricants. 12.2024, 6, 25 p., 218.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Service Strength Assessment of Macroscopic Imperfections in Cast Steel Alloys

    Stoschka, M., Horvath, M., Mössler, W. & Grun, F., 13 Jun 2024.

    Research output: Contribution to conference › Paper › peer-review

  16. Published

    Influence of corrosion fatigue on the stress gradient effect of the aluminium alloy EN AW-6082 T6

    Schönowitz, M., Maier, B. & Grün, F., 9 Apr 2024, In: International Journal of Fatigue. 184.2024, July, 10 p., 108322.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    A Comprehensive Numerical Study of a Wedge-Shaped Textured Convergent Oil Film Gap

    Scharf, R., Maier, M., Pusterhofer, M. & Grün, F., 5 Apr 2024, In: Lubricants. 12.2024, 4, 20 p., 121.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Development of a novel aerosol-lubricated ring-on-liner test methodology

    Gussmagg, J., Pusterhofer, M. & Grun, F., 2024.

    Research output: Contribution to conference › Presentation › Research › peer-review

  19. Published

    Werkstoffkennwerte aus dem Tabellenbuch – Quo vadis?

    Grun, F., 2024, Kfz-Symposium 2024: Neue Technologien und Innovationen in der Fahrzeugtechnik XIX.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. 2023
  21. Published

    In-depth study of direct and derived acoustic emission parameters and their information content for classifying lubricated tribological sliding contacts

    Strablegg, C., Summer, F., Renhart, P., Pusterhofer, M. & Grün, F., Dec 2023, In: Tribology International. 2023, Vol.190*December, 17 p., 109028.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Fretting Wear of Thermoplastic Polyurethane (TPU): The Role of Environmental Conditions

    Tockner, M., Staudinger, P., Fasching, M., Schwarz, T., Summer, F., Grun, F. & Hausberger, A., 30 Sept 2023, Proceedings of 9th International Tribology Conference, ITC Fukuoka 2023.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    The Interaction of Two Amorphous Carbon Coatings (ta-C and a-C) on Polymer Substrates and the Consequences of the Tribological Contact Situation

    Stiller, T., Tervakangas, S., Manning, N., Jarry, O., Slapnik, J., Cerne, B., Grun, F. & Hausberger, A., 30 Sept 2023, Proceedings of 9th International Tribology Conference, ITC Fukuoka 2023.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    On the condition monitoring of rolling element bearings in rotating electrical machines

    Kraffczyk, F., Floh, F., Renhart, P. & Grun, F., 29 Sept 2023.

    Research output: Contribution to conference › Poster › Research

  25. Published

    Thermomechanische Ermüdung von warmfesten Stählen

    Winter, G. & Grun, F., 20 Sept 2023.

    Research output: Contribution to conference › Presentation › Research

  26. Published

    Low-Cycle Fatigue Behavior of Wire and Arc Additively Manufactured Ti-6Al-4V Material

    Springer, S., Leitner, M., Gruber, T., Oberwinkler, B., Lasnik, M. & Grün, F., 5 Sept 2023, In: Materials. 16.2023, 18, 21 p., 6083.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Impacts of nano-clay particles and heat-treating on out-of-phase thermo-mechanical fatigue characteristics in piston aluminum-silicon alloys

    Bahmanabadi, H., Azadi, M., Dadashi, A., Torkian, J., Parast, M. S. A., Winter, G. & Grün, F., 22 Jun 2023, In: Frattura ed Integrita Strutturale. 17.2023, 65, p. 224-245 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Influence of corrosion fatigue on the fatigue strength of an AlSi10MgMn high-pressure die-casting alloy with regard to the surface condition

    Schönowitz, M., Maier, B., Grün, F. & Bauer-Troßmann, K., 25 May 2023, In: Materials and Corrosion. 74.2023, 9, p. 1382-1389 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. E-pub ahead of print

    Experimental visualization of the wear and scuffing evolution of a flake graphite cast iron cylinder liner

    Gussmagg, J., Pusterhofer, M., Summer, F. & Grun, F., 3 May 2023, (E-pub ahead of print) In: Wear. 526-527.2023, 15 August, 12 p., 204948.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Multiscale Wear Simulation in Textured, Lubricated Contacts

    Maier, M., Pusterhofer, M. & Grün, F., 29 Mar 2023, In: Coatings. 13.2023, 4, 15 p., 697.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    On the Wear Behaviour of Bush Drive Chains: Part II—Performance Screening of Pin Materials and Lubricant Effects

    Summer, F., Bergmann, P. & Grün, F., 25 Mar 2023, In: Lubricants. 11.2023, 4, 24 p., 157.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Chaboche viscoplastic material model for process simulation of additively manufactured Ti-6Al-4 V parts

    Springer, S., Seisenbacher, B., Leitner, M., Grün, F., Gruber, T., Lasnik, M. & Oberwinkler, B., 11 Mar 2023, In: Welding in the world. 67.2023, April, p. 997-1007 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. E-pub ahead of print

    Wear simulation in lubricated contacts considering wear-dependent surface topography changes

    Maier, M., Pusterhofer, M. & Grün, F., 18 Feb 2023, (E-pub ahead of print) In: Materials Today: Proceedings. 93.2023, 4, p. 563-570 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    On the Wear Behavior of Bush Drive Chains: Part I—Characterization of Engine Damage Processes and Development of a Model Test Setup for Pin Wear

    Summer, F., Bergmann, P. & Grün, F., 16 Feb 2023, In: Lubricants. 11.2023, 2, 20 p., 85.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Prediction of Friction Power via Machine Learning of Acoustic Emissions from a Ring-on-Disc Rotary Tribometer

    Strablegg, C., Summer, F., Renhart, P. & Grün, F., 19 Jan 2023, In: Lubricants. 11.2023, 2, 17 p., 37.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Additive Fertigung - Designkriterien und Anwendungen

    Grun, F. & Tittler, M., 2023, Kfz-Symposium 2023: Neue Technologien und Innovationen in der Fahrzeugtechnik XVIII.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. 2022
  38. Published

    Influence of T6 heat-treating and over-ageing on out-of-phase thermo-mechanical fatigue behaviors of Al-Si-Cu alloy

    Khisheh, S., Azadi, M., Hendoabadi, V. Z., Parast, M. S. A., Winter, G., Seisenbacher, B., Grün, F. & Khalili, K., Dec 2022, In: Materials Today Communications. 33.2022, December, 12 p., 104803.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Modelling Approaches of Wear-Based Surface Development and Their Experimental Validation

    Maier, M., Pusterhofer, M. & Grün, F., 26 Nov 2022, In: Lubricants. 10.2022, 12, 21 p., 335.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Very high cycle fatigue assessment at elevated temperature of 100 µm thin structures made of high-strength steel X5CrNiCuNb16-4

    Himmelbauer, F., Winter, G., Seisenbacher, B., Grün, F. & Kiesling, C., 12 Oct 2022, In: Journal of Materials Research and Technology. 21.2022, November-December, p. 1811-1829 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Wear simulation in lubricated contacts considering wear-dependent surface topography changes

    Maier, M., Pusterhofer, M. & Grün, F., 21 Sept 2022.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    On the Transferability of Fatigue and Cyclic Deformation Data to 100 µm Thin Structures

    Himmelbauer, F., Winter, G., Grün, F. & Kiesling, C., 15 Sept 2022, In: Metals. 12.2022, 9, 22 p., 1524.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Tribological characterization of coatings for their suitability as protective coatings for rollers using two-disc model investigations

    Grün, F. & Gódor, I., 14 Jul 2022, 7th World Tribology Congress, WTC2022, Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Influence of viscoelasticity on fatigue behaviour of short fibre reinforced polymers depending on mean stress and fibre orientation

    Stadler, G., Primetzhofer, A., Pinter, G. G. & Grün, F., 26 Jun 2022.

    Research output: Contribution to conference › Presentation › Research

  45. Published

    Optimization of disc geometry and hardness distribution for better transferability of fatigue life prediction from disc to FZG tests

    Trausmuth, A., Stoschka, M. & Grün, F., 15 Jun 2022, In: Wear. 498-499.2022, 15 June, 13 p., 204329.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Fatigue Assessment of Wire and Arc Additively Manufactured Ti-6Al-4V

    Springer, S., Leitner, M., Gruber, T., Oberwinkler, B., Lasnik, M. & Grün, F., 4 May 2022, In: Metals. 12.2022, 5, 17 p., 795.

    Research output: Contribution to journal › Article › Research › peer-review

  47. E-pub ahead of print

    Methodology, validation & signal processing of acoustic emissions for selected lubricated tribological contacts

    Strablegg, C., Renhart, P., Summer, F. & Grün, F., 2 May 2022, (E-pub ahead of print) In: Materials Today: Proceedings. 2022, 5, p. 2604-2610 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    VHCF properties and assessment of specimens and thin-walled component-like structures made of high-strength steel X5CrNiCuNb16-4

    Himmelbauer, F., Winter, G., Grün, F. & Kiesling, C., 19 Feb 2022, In: International Journal of Fatigue. 156.2022, March, 10 p., 106645.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Cyclic hardening/softening experimental data in nano-clay-composite and aluminum alloy under high-temperature strain-controlled loading

    Azadi, M., Bahmanabadi, H., Grün, F., Winter, G. & Seisenbacher, B., 9 Feb 2022, In: Experimental Results. 3.2022, e6, 32 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Evaluation and consideration of local specimen material properties in lifetime prediction of short fiber-reinforced PA6T/6I

    Stadler, G., Primetzhofer, A., Pinter, G. & Grün, F., 1 Feb 2022, In: Fatigue and Fracture of Engineering Materials and Structures. 45.2022, 4, p. 980-990 11 p., 13634.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Artificial intelligence assisted fatigue failure prediction

    Schneller, W., Leitner, M., Maier, B., Grün, F., Jantschner, O., Leuders, S. & Pfeifer, T., Feb 2022, In: International Journal of Fatigue. 155.2022, February, 7 p., 106580.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Validation of statistic and deterministic asperity contact models using experimental Stribeck data

    Maier, M., Pusterhofer, M., Summer, F. & Grün, F., Jan 2022, In: Tribology International. 165.2022, January, 11 p., 107329.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Fatigue life assessment and modelling of the cyclic material behaviour of a high-strength martensitic steel

    Himmelbauer, F., Seisenbacher, B., Winter, G., Grün, F. & Kiesling, C., 2022, LCF9 Ninth International Conference on Low Cycle Fatigue.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Implementation of a viscoplastic substrate creep model in the thermomechanical simulation of the WAAM process

    Springer, S., Röcklinger, A., Leitner, M., Grün, F., Gruber, T., Lasnik, M. & Oberwinkler, B., 2022, In: Welding in the world.

    Research output: Contribution to journal › Article › Research › peer-review

  55. 2021
  56. Published

    Novel S-N curve for different hardened layers in point and line contact

    Trausmuth, A. & Grün, F., Dec 2021, In: International Journal of Fatigue. 153.2021, December, 16 p., 106439.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Monitoring Tribological Events by Acoustic Emission Measurements for Bearing Contacts

    Renhart, P., Maier, M., Strablegg, C., Summer, F., Grün, F. & Eder, A., 10 Nov 2021, In: Lubricants. 9.2021, 11, 14 p., 109.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    The tribological performance of silver in aircraft turbine load cases

    Renhart, P., Summer, F., Grün, F., Posch, C. & Eder, A., Nov 2021, In: Tribology International. 163.2021, November, 15 p., 107184.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Improving the Tribological Properties of Technical Polymers with Metal Sulphide Compounds

    Hausberger, A., Stiller, T., Kappl, C., Hensgen, L. & Grün, F., 13 Sept 2021, In: Lubricants. 9.2021, 9, 13 p., 91.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Effect of nano-clay addition and heat treatment on tensile and stress-controlled low-cycle fatigue behaviors of aluminum-silicon alloy

    Azadi, M., Dadashi, A., Winter, G., Seisenbacher, B. & Grün, F., Jul 2021, In: Frattura ed Integrità Strutturale . 15.2021, 57, p. 373-397 25 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Effect of Surface Layer on the Fatigue Strength of Selectively Laser Melted 17-4 PH Steel

    Leitner, M., Schneller, W., Springer, S. & Grün, F., Jul 2021, In: Journal of Materials Engineering and Performance. 30, 7, p. 5383-5391 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    A novel high-frequency fatigue testing methodology for small thin-walled structures in the HCF/VHCF regime

    Himmelbauer, F., Tillmanns, M., Winter, G., Grün, F. & Kiesling, C., May 2021, In: International Journal of Fatigue. 146, 146, 10 p., 106146.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Phenomenological wear model of case-hardened 20MnCr5 under cyclic line rolling contact

    Trausmuth, A., Godor, I. & Grün, F., 15 Apr 2021, In: Wear. 470, 15 April, 16 p., 203607.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Fatigue strength assessment of additively manufactured metallic structures considering bulk and surface layer characteristics

    Schneller, W., Leitner, M., Pomberger, S., Grün, F., Leuders, S., Pfeifer, T. & Jantschner, O., Apr 2021, In: Additive Manufacturing. 40.2021, April, 12 p., 101930.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Model Calibration and Data Set Determination Considering the Local Micro-Structure for Short Fiber Reinforced Polymers

    Primetzhofer, A., Stadler, G., Pinter, G. & Grün, F., 27 Jan 2021, In: Journal of composites science. 5.2021, 2, 11 p., 40.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    On an experimental-computational approach for localised durability assessment of sliding contacts

    Pusterhofer, M. & Grün, F., 2021, In: Wear. 486-487.2021, 15 December, 18 p., 204068.

    Research output: Contribution to journal › Article › Research › peer-review

  67. 2020
  68. Published

    Investigation of the influence of viscoelastic behaviour on the lifetime of short fibre reinforced polymers

    Stadler, G., Primetzhofer, A., Jerabek, M., Pinter, G. & Grün, F., Dec 2020, In: Polymers. 12, 12, p. 1-13 13 p., 2874.

    Research output: Contribution to journal › Article › Research › peer-review

  69. E-pub ahead of print

    Fatigue strength estimation methodology of additively manufactured metallic bulk material

    Schneller, W., Leitner, M., Leuders, S., Sprauel, J. M., Grün, F., Pfeifer, T. & Jantschner, O., 4 Nov 2020, (E-pub ahead of print) In: Additive Manufacturing. 39.2021, March, 13 p., 101688.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Precise Correlation of Contact Area and Forces in the Unstable Friction between a Rough Fluoroelastomer Surface and Borosilicate Glass

    Wang, C., Bonyadi, S. Z., Grün, F., Pinter, G., Hausberger, A. & Dunn, A. C., 16 Oct 2020, In: Materials. 13.2020, 20, p. 1-16 16 p., 4615.

    Research output: Contribution to journal › Article › Research › peer-review

  71. E-pub ahead of print

    Investigation and simulation of the age-dependent behaviour of an aluminium alloy under thermomechanical loading

    Seisenbacher, B., Winter, G. & Grün, F., 15 Oct 2020, (E-pub ahead of print) In: Mechanics of materials. 151.2020, December, 11 p., 103612.

    Research output: Contribution to journal › Article › Research › peer-review

  72. E-pub ahead of print

    Cumulative damage assessment of tribological durability limits

    Pusterhofer, M., Summer, F., Gódor, I. & Grün, F., 6 Jul 2020, (E-pub ahead of print) In: Wear. 456-457.2020, 15 September, 15 p., 203318.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Evaluation of tensile and low-cycle fatigue properties at elevated temperatures in piston aluminum-silicon alloys with and without nano-clay-particles and heat treatment

    Azadi, M., Bahmanabadi, H., Grün, F. & Winter, G., 11 May 2020, In: Materials Science and Engineering A. 788.2020, 24 June, 16 p., 139497.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Modelling the effect of ageing on the yield strength of an aluminium alloy under cyclic loading at different ageing temperatures and test temperatures

    Seisenbacher, B., Winter, G. & Grün, F., 13 Apr 2020, In: International Journal of Fatigue. 137.2021, August, 9 p., 105635.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg

    Schneller, W., Leitner, M., Springer, S., Grün, F. & Taschauer, M., 1 Apr 2020, Selective Laser Melting: Materials and Applications. p. 4-12

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  76. Published

    Influence of specimen diameter size on the deformation behaviour and short-term strength range of an aluminum alloy

    Seisenbacher, B., Klösch, R., Winter, G. & Grün, F., Apr 2020, In: MP materials testing : Materialprüfung . 62.2020, 4, p. 345-350 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Tribologie im Maschinenbau: In Mobilität und anderen Bereichen

    Grün, F., 2 Mar 2020, Neue Technologien und Innovationen in der Fahrzeugtechnik XVII.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Investigation of fibre orientation and notch support of short glass fibre lot reinforced thermoplastics

    Stadler, G., Primetzhofer, A., Pinter, G. & Grün, F., 1 Feb 2020, In: International Journal of Fatigue. 131.2020, February, 8 p., 105284.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Tribological investigations with near eutectic AlSi alloys found in engine vane pumps – Characterization of the material tribo-functionalities

    Summer, F., Pusterhofer, M., Grün, F. & Gódor, I., 1 Feb 2020, In: Tribology International. 146.2020, June, 13 p., 106236.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Assessment of Shaft Surface Structures on the Tribological Behavior of Journal Bearings by Physical and Virtual Simulation

    Pusterhofer, M., Summer, F., Maier, M. & Grün, F., 15 Jan 2020, In: Lubricants. 8.2020, 1, 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Close-to-Application Test Methodology Validated by a Baseline Study for Novel Bearing Developments in Aircraft Turbines

    Renhart, P., Summer, F., Grün, F. & Eder, A., 1 Jan 2020, In: Lubricants. 8, 1, p. 1-14 14 p., 7.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Friction and Wear Performance of Various Polymer Coatings for Journal Bearings under Stop Start Sliding

    Summer, F., Grün, F. & Ravenhill, E. R., 1 Jan 2020, In: Lubricants. 8.2020, 1, 14 p., 1.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Material behaviour of a dual hardening steel under thermomechanical loading

    Seisenbacher, B., Hofinger, M., Winter, G. & Grün, F., Jan 2020, In: Fatigue & fracture of engineering materials & structures : Fatigue and fracture of engineering materials and structures. 43.2020, 1, p. 191-200 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Effect of surface layer on the fatigue strength of additively manufactured 17-4 PH steel

    Leitner, M., Schneller, W., Springer, S. & Grün, F., 2020.

    Research output: Contribution to conference › Paper

  85. Published

    Numerical Fatigue Analysis of Induction-Hardened and Mechanically Post-Treated Steel Components

    Leitner, M., Aigner, R. & Grün, F., 2020, Advances in CAD/CAM/CAE Technologies. Multidisciplinary Digital Publishing Institute (MDPI)

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  86. 2019
  87. Published

    Development of a Model Test System for a Piston Ring/Cylinder Liner-Contact with Focus on Near-to-Application Seizure Behaviour

    Pusterhofer, M., Summer, F., Wuketich, D. & Grün, F., 22 Nov 2019, In: Lubricants. 7.2019, 12, p. 104-115 12 p., 104.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Influencing factors on the fatigue strength of selectively laser melted structures

    Schneller, W., Leitner, M., Springer, S., Beter, F. & Grün, F., 20 Nov 2019.

    Research output: Contribution to conference › Poster › Research

  89. Published

    Effect of Post Treatment on the Microstructure, Surface Roughness and Residual Stress Regarding the Fatigue Strength of Selectively Laser Melted AlSi10Mg Structures

    Schneller, W., Leitner, M., Pomberger, S., Springer, S., Beter, F. & Grün, F., 16 Oct 2019, In: Journal of Manufacturing and Materials Processing. 3.2019, 4, 21 p., 89.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Influence of surface roughness on additively manufactured aluminum components

    Springer, S., Schneller, W., Leitner, M. & Grün, F., 26 Sept 2019.

    Research output: Contribution to conference › Poster › Research

  91. Published

    Influence of surface roughness on additively manufactured aluminum components

    Springer, S., Schneller, W., Leitner, M. & Grün, F., 24 Sept 2019, 36th Danubia Adria Symposium on Advances in Experimental Mechanics: Extended Abstracts. Plzen, Czech Republic, p. 105-106

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. Published

    Fretting behavior of thermoplastic polyurethanes

    Wang, C., Hausberger, A., Berer, M., Pinter, G., Grün, F. & Schwarz, T., 23 Aug 2019, In: Lubricants. 7.2019, 9, 24 p., 73.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Correlation of Tribological Behavior and Fatigue Properties of Filled and Unfilled TPUs

    Wang, C., Stiller, T., Hausberger, A., Pinter, G., Grün, F. & Schwarz, T., 20 Jul 2019, In: Lubricants. 7.2019, p. 1-18 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Damage models of different hardness layers subjected to point contact

    Trausmuth, A., Godor, I. & Grün, F., 15 Jul 2019, In: Wear. 430-431.2019, July, p. 157-168 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    A baseline study for developing novel coatings for high performance journal bearings in aircraft-turbines

    Renhart, P., Summer, F. & Grün, F., 13 Jun 2019, ECOTRIB 2019. Österreichische Tribologische Gesellschaft, p. 70 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Development of a model test system for a piston ring/cylinder liner-contact with focus on near-to-application seizure behaviour

    Pusterhofer, M., Wuketich, D., Summer, F. & Grün, F., 13 Jun 2019, ECOTRIB 2019. Österreichische Tribologische Gesellschaft, p. 1 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Challenges of friction reduction of engine plain bearings – Tackling the problem with novel bearing materials

    Summer, F., Grün, F., Offenbecher, M. & Taylor, S., 1 Mar 2019, In: Tribology International. 131.2019, March, p. 238-250 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Lifetime assessment of anisotropic materials by the example short fibre reinforced plastic

    Primetzhofer, A., Stadler, G., Pinter, G. & Grün, F., 1 Mar 2019, In: International Journal of Fatigue. 120.2019, March, p. 294-302 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg

    Schneller, W., Leitner, M., Springer, S., Grün, F. & Taschauer, M., 1 Feb 2019, In: Journal of Manufacturing and Materials Processing. 3.2019, 1, 9 p., 16.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg

    Schneller, W., Leitner, M., Springer, S., Grün, F. & Taschauer, M., 1 Feb 2019, In: Journal of Manufacturing and Materials Processing. 3.2019, 1, 9 p., 16.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Data set determination for lifetime assessment of short fibre reinforced polymers

    Primetzhofer, A., Stadler, G., Pinter, G. G. & Grun, F., 1 Jan 2019, In: Zeitschrift Kunststofftechnik : Journal of plastics technology. 15.2019, 1, 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Datensatzermittlung zur lebensdauervorhersage kurzfaserverstärkter kunststoffe

    Primetzhofer, A., Stadler, G., Grün, F. & Pinter, G., 1 Jan 2019, In: Zeitschrift Kunststofftechnik/Journal of Plastics Technology. 15.2019, 1, 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Study of notch effect and fibre orientation on fatigue strength of short glass fibre reinforced polyamide

    Stadler, G., Primetzhofer, A., Pinter, G. & Grün, F., 1 Jan 2019, ECCM 2018 - 18th European Conference on Composite Materials. (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  104. Published

    Auslegung thermomechanisch gefertigter Strukturen

    Grün, F. & Leitner, M., 2019, Proceedings zu Neue Technologien und Innvoationen in der Fahrzeugtechnik XVI. Steyr, p. 1 30 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  105. Published

    Consideration of ageing effects during the TMF test on the stress-strain behaviour of an aluminium alloy

    Seisenbacher, B., Winter, G. (Co-editor) & Grün, F. (Co-editor), 2019.

    Research output: Contribution to conference › Abstract

  106. Published

    Effect of surface condition on the fatigue strength of selectively laser melted metallic structures

    Leitner, M., Schneller, W., Springer, S., Beter, F. & Grün, F., 2019, 72nd IIW Annual Assembly and International Conference: IIW Document XIII-WG4-171-19.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  107. Published

    Fatigue strength of welded joints and additively manufactured structures

    Grün, F. & Leitner, M., 2019, Proceedings International FEMFAT User Meeting 2019: Fatigue Analysis of Joint Connections.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  108. Published

    Influencing factors on the fatigue strength of selectively laser melted structures

    Schneller, W., Leitner, M., Springer, S., Beter, F. & Grün, F., 2019, Procedia Structural Integrity: Fatigue Design 2019, International Conference on Fatigue Design, 8th Edition. Vol. 19. p. 556 - 565 10 p. (Procedia Structural Integrity).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  109. Published

    Novel model test configuration for investigation of cam/tappet contacts

    Grün, F., Gódor, I., Summer, F. & Moizan, S., 2019, p. 1-2.

    Research output: Contribution to conference › Abstract › peer-review

  110. Published

    Numerical Fatigue Analysis of Induction-Hardened and Mechanically Post-Treated Steel Components

    Leitner, M., Aigner, R. & Grün, F., 2019, In: Machines : open access journal . 7.2019, 1, 1.

    Research output: Contribution to journal › Article › Research › peer-review

  111. Published

    Tribological performance of polymer bearings under stop start operation

    Summer, F., Grün, F., Offenbecher, M. & Taylor, S., 2019, Ecotrib 2019 - Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  112. 2018
  113. Published

    Lubrication Regime classification of hydrodynamic journal bearings by machine learning using Torque Data

    Moder, J., Bergmann, P. & Grün, F., 14 Dec 2018, In: Lubricants. 6, 4, 108.

    Research output: Contribution to journal › Article › Research › peer-review

  114. Published

    An investigation of fretting behavior of thermoplastic polyurethane for mechanical seal application

    Wang, C., Hausberger, A., Berer, M., Pinter, G., Grün, F. & Schwarz, T., 1 Dec 2018, In: Polymer Testing. 72, p. 271-284 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  115. Published

    Application of a √ area -Approach for Fatigue Assessment of Cast Aluminum Alloys at Elevated Temperature

    Aigner, R., Garb, C., Leitner, M., Stoschka, M. & Grün, F., Dec 2018, In: Metals : open access journal . 8, 12

    Research output: Contribution to journal › Article › Research › peer-review

  116. Published

    Relationship between fatigue and tribological performance of Thermoplastic Polyurethanes (TPU)

    Wang, C., Stiller, T., Hausberger, A., Grün, F., Pinter, G. G. & Schwarz, T., 25 Sept 2018, Proceedings of the 3rd International conference on Polymer Tribology.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  117. Published

    Fatigue and Fracture Behavior of Induction-Hardened and Superimposed Mechanically Post-treated Steel Surface Layers

    Leitner, M., Grün, F., Tuncali, Z. & Chen, W., Sept 2018, In: Journal of Materials Engineering and Performance. 27, 9, p. 4881-4892

    Research output: Contribution to journal › Article › Research › peer-review

  118. Published

    Evaluation of wear phenomena of journal bearings by close to component testing and application of a numerical wear assessment

    Bergmann, P., Grün, F., Summer, F. & Gódor, I., 26 Jul 2018, In: Lubricants. 2018, 3, 25 p., 65.

    Research output: Contribution to journal › Article › Research › peer-review

  119. Published

    Implementation of veriable amplitude tests in lifetime assecessment so short fibre reinforced polymeres

    Primetzhofer, A., Stadler, G., Pinter, G. & Grun, F., 4 Jul 2018, Proceeding of 7th International conference of composite materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  120. Published

    Effect of temperature on wear and tribofilm formation in highly loaded DLC-steel line contacts

    Moder, J., Grün, F., Summer, F., Gasperlmair, T. & Andritschky, M., 1 Jul 2018, In: Tribology International. 123, p. 120-129 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  121. Published

    Validation of a new high frequency testing technique in the VHCF regime – Fatigue properties of a 42CrMoS4 and X5CrNiCuNb16-4 steel

    Milošević, I., Renhart, P., Winter, G., Grün, F. & Kober, M., 1 Jul 2018, In: International Journal of Fatigue. 112, p. 198-205 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  122. Published

    Study of notch effect and fibre orientation on fatigue strength of short glass fibre reinforced polyamide

    Stadler, G., Primetzhofer, A., Pinter, G. G. & Grun, F., 27 Jun 2018.

    Research output: Contribution to conference › Presentation › Research

  123. Published

    Application of modified Kitagawa-Takahashi diagram for fatigue strength assessment of cast Al-Si-Cu alloys

    Garb, C., Leitner, M., Stauder, B., Schnubel, D. & Grün, F., 1 Jun 2018, In: International Journal of Fatigue. 111, p. 256-268 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  124. Published

    Fatigue life assessment regarding different influences on the HCF/VHCF behavior of a martensitic steel

    Milosevic, I., Seisenbacher, B., Winter, G., Grün, F. & Kober, M., 25 May 2018, In: MATEC Web of Conferences . 165, p. 20004 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  125. Published

    AT516367 (B1) - Prüfstand und Prüfverfahren mit verstellbarem Achsabstand zwischen Übertragungsprüfkörpern

    Grun, F. (Inventor) & Gódor, I. (Inventor), 15 May 2018, IPC No. G01M13/02 (2006.01), Patent No. AT516367(B1), 15 May 2018, Priority date 18 Sept 2014, Priority No. A50659/2014

    Research output: Patent

  126. Published

    Improved Approach to Determine the Material Parameters for a Combined Hardening Model

    Seisenbacher, B., Winter, G. & Grun, F., 16 Apr 2018, In: Materials sciences and applications : MSA.

    Research output: Contribution to journal › Article › Research › peer-review

  127. Published

    A modelling framework for the simulation of lubricated and dry line contacts

    Moder, J., Grün, F. & Gódor, I., 1 Apr 2018, In: Tribology International. 120, p. 34-46 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  128. Published

    Application of high performance composite polymers with steel counterparts in dry rolling/sliding contacts

    Moder, J., Grün, F., Summer, F., Kohlhauser, M. & Wohlfahrt, M., 1 Apr 2018, In: Polymer Testing. 66, p. 371-382 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  129. E-pub ahead of print

    On the modelling of mixed lubrication of conformal contacts

    Bergmann, P., Grun, F., Gódor, I., Stadler, G. & Maier-Kiener, V., 26 Mar 2018, (E-pub ahead of print) In: Tribology International. 125.2018, September, p. 220-236 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  130. Published

    A novel approach for modeling surface effects in hydrodynamic lubrication

    Pusterhofer, M., Bergmann, P., Summer, F., Grün, F. & Brand, C., 12 Mar 2018, In: Lubricants. 6, 1, 27.

    Research output: Contribution to journal › Article › Research › peer-review

  131. Published

    Auslegung von Kunststoffbauteilen für den Einsatz im Automobil

    Grun, F. & Primetzhofer, A., 5 Mar 2018, Seminarunterlagen zu Kfz-Symposium 2018. p. 1-29 29 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  132. Published

    Experimental determination of highly dynamic forces during wood trunk comminution with a drum chipper

    Pichler, P., Leitner, M., Grun, F. & Guster, C., 11 Jan 2018, In: Journal of Agricultural Engineering. p. 1-16 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  133. Published

    Evaluation of wood material models for the numerical assessment of cutting forces in chipping processes

    Pichler, P., Leitner, M., Grün, F. & Guster, C., Jan 2018, In: Wood Science and Technology. 52, 1, p. 281-294 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  134. Published

    Effect of Tungsten Carbides on Abrasive Wear of Hardfacing Coatings

    Pichler, P., Leitner, M., Grün, F. & Haßler, J., 2018, In: Advances in tribology. 2018, 4047818.

    Research output: Contribution to journal › Article › Research › peer-review

  135. Published

    In-situ crack propagation measurement of high-strength steels including overload effects

    Simunek, D., Leitner, M. & Grün, F., 2018, In: Procedia Engineering. 213, p. 335-345 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  136. Published

    Numerical and analytical studies of a shaker test system for fatigue testing

    Renhart, P., Milosevic, I. & Grun, F., 2018, 34th Danubia Adria Symposium on Advances in Experimental Mechanics, 19 - 22 September 2017, Trieste, Italy. Eberhardsteiner, J., Růžička, M. & Cosmi, F. (eds.). 5 ed. Elsevier Ltd, Vol. 2018. p. 26733-26738 6 p. (Materials Today: Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  137. Published

    Short glass fibre reinforced polyamide under low cycle fatigue

    Primetzhofer, A., Stadler, G., Pinter, G. G. & Grün, F., 2018, Proceedings ECCM 18.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  138. Published

    Study of notch effect and fibre orientation on fatigue strength of short glass fibre reinforced polyamide

    Primetzhofer, A., Stadler, G., Schneider, C., Pinter, G. G. & Grün, F., 2018, Proceedings ECCM 18.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  139. 2017
  140. Published

    Damage Equivalent Test Methodologies as Design Elements for Journal Bearing Systems

    Summer, F., Bergmann, P. & Grün, F., 14 Dec 2017, In: Lubricants. 5.2017, 4, 16 p., 47.

    Research output: Contribution to journal › Article › Research › peer-review

  141. Published

    Effect of elevated temperature on the fatigue strength of casted AlSi8Cu3 aluminium alloys

    Garb, C., Leitner, M. & Grun, F., 12 Dec 2017, In: Procedia structural integrity / ESIS. 7.2017, p. 497-504 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  142. E-pub ahead of print

    Effects of Inclusions on the Very High Cycle Fatigue Properties of a High Strength Martensitic Steel within the Transition Area

    Milosevic, I., Garb, C., Winter, G., Grun, F. & Kober, M., 12 Dec 2017, (E-pub ahead of print) In: Procedia Structural Integrity. 7.2017, p. 327-334 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  143. Published

    In-situ crack propagation measurement of high-strength steels including overload effects

    Simunek, D., Leitner, M. & Grun, F., 29 Nov 2017.

    Research output: Contribution to conference › Poster › Research

  144. Published

    CN107366570 (A) - TURBOCHARGER ASSEMBLY

    Hettinger, R. (Inventor), DAGUIN , F. (Inventor), BOILEAU , R. (Inventor), CAPELLI, M. (Inventor), Simon, P. (Inventor), GAINETON, N. (Inventor), BLUMENSCHEIN, E. (Inventor), REICHHART, M. (Inventor), Risch, G. (Inventor), Steinwender, L. (Inventor), Grun, F. (Inventor) & Gódor, I. (Inventor), 21 Nov 2017, IPC No. F01D25/16; F01D25/18; F01D25/24; F02B39/00; F02B39/14, Patent No. CN107366570 (A), Priority date 13 May 2016, Priority No. US201615154673

    Research output: Patent

  145. Published

    US10316742 (B2) - Turbocharger assembly

    Hettinger, R. (Inventor), DAGUIN , F. (Inventor), BOILEAU , R. (Inventor), CAPELLI, M. (Inventor), Simon, P. (Inventor), GAINETON, N. (Inventor), BLUMENSCHEIN, E. (Inventor), REICHHART, M. (Inventor), Risch, G. (Inventor), Steinwender, L. (Inventor), Grün, F. (Inventor) & Gódor, I. (Inventor), 16 Nov 2017, IPC No. F01D25/12; F01D25/16; F01D25/18; F01D25/24; F02B33/40; F02B39/14 , Patent No. US10316742 (B2), Priority date 13 May 2016, Priority No. US201615154673

    Research output: Patent

  146. Published

    US2017328273 (A1) - TURBOCHARGER ASSEMBLY

    Hettinger, R. (Inventor), DAGUIN , F. (Inventor), BOILEAU , R. (Inventor), CAPELLI, M. (Inventor), Simon, P. (Inventor), GAINETON, N. (Inventor), BLUMENSCHEIN, E. (Inventor), REICHHART, M. (Inventor), Risch, G. (Inventor), Steinwender, L. (Inventor), Grun, F. (Inventor) & Gódor, I. (Inventor), 16 Nov 2017, IPC No. F01D25/12; F01D25/16; F01D25/18; F01D25/24; F02B33/40; F02B39/14 , Patent No. US2017328273 (A1), Priority date 16 May 2016, Priority No. US201615154673

    Research output: Patent

  147. Published

    EP3244027 (A1) - TURBOCHARGER ASSEMBLY

    Hettinger, R. (Inventor), DAGUIN , F. (Inventor), BOILEAU , R. (Inventor), CAPELLI, M. (Inventor), Simon, P. (Inventor), GAINETON, N. (Inventor), BLUMENSCHEIN, E. (Inventor), REICHHART, M. (Inventor), Risch, G. (Inventor), Steinwender, L. (Inventor), Grun, F. (Inventor) & Gódor, I. (Inventor), 15 Nov 2017, IPC No. F01D25/16; F01D25/18; F02C6/12, Patent No. EP3244027 (A1), Priority date 13 May 2016, Priority No. EP20170166958

    Research output: Patent

  148. Published

    LEBENSDAUERBERECHNUNG - KONZEPTE FÜR PROZESSABHÄNGIGE MATERIALIEN AM BEISPIEL FASERVERSTÄRKTER KUNSTSTOFFE

    Primetzhofer, A., Stadler, G., Pinter, G. G. & Grün, F., 11 Oct 2017. 16 p.

    Research output: Contribution to conference › Poster › Research

  149. Published

    LEBENSDAUERBERECHNUNG - KONZEPTE FÜR PROZESSABHÄNGIGE MATERIALIEN AM BEISPIEL FASERVERSTÄRKTER KUNSTSTOFFE

    Primetzhofer, A., Stadler, G., Pinter, G. G. & Grün, F., 11 Oct 2017, (R)Evolution des Antriebs - Auswirkungen auf die Betriebsfestigkeit der Bauteile in der Wirkungskette. 44 ed. Berlin, Vol. DVM_Arbeitskreis Betriebsfestigkeit. 16 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  150. Published

    Influence of the stress gradient on the fatigue life calculation of a martensitic high strength steel

    Milosevic, I., Winter, G., Grün, F. & Kober, M., 1 Oct 2017, In: Frattura ed Integrità Strutturale . 2017, 42, 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  151. Published

    Influence of tribofilm formation in DLC-steel line contacts on friction

    Moder, J., Grun, F., Summer, F., Gasperlmair, T. & Andritschky, M., 5 Sept 2017, p. 63. 1 p.

    Research output: Contribution to conference › Abstract › peer-review

  152. E-pub ahead of print

    Simulation of lamellar cast iron components under TMF-loads

    Strohhäussl, B., Stoschka, M., Winter, G. & Grün, F., 24 Aug 2017, (E-pub ahead of print) In: Materials Today: Proceedings. 4.2017, 5, Part 1, p. 5957-5962 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  153. Published

    Expansion of the metrological visualization capability by the implementation of acoustic emission analysis

    Bergmann, P., Grün, F., Summer, F., Gódor, I. & Stadler, G., 1 Aug 2017, In: Advances in tribology. 2017, 17 p., 3718924.

    Research output: Contribution to journal › Article › Research › peer-review

  154. E-pub ahead of print

    A new high frequency testing method for steels under tension/compression loading in the VHCF regime

    Milosevic, I., Renhart, P., Winter, G., Grün, F. & Kober, M., 17 Jul 2017, (E-pub ahead of print) In: International Journal of Fatigue. 104.2017, November, p. 150-157 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  155. Published

    Multiaxial fatigue strength assessment of electroslag remelted 50CrMo4 steel crankshafts

    Leitner, M., Tuncali, Z., Steiner, R. & Grün, F., 1 Jul 2017, In: International Journal of Fatigue. 100.2017, July, Part 1, p. 159-175 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  156. Published

    Tribology of journal bearings: Start stop operation as life-time factor

    Summer, F., Grün, F., Offenbecher, M., Taylor, S. & Lainé, E., Jul 2017, In: Tribologie und Schmierungstechnik. 64.2017, 4, p. 44-54 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  157. Published

    A Novel Two-Disc Machine for High Precision Friction Assessment

    Moder, J., Grün, F., Stoschka, M. & Gódor, I., 28 Jun 2017, In: Advances in tribology. 2017, 1, 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  158. Published

    NOVEL LEAD FREE BEARING OVERLAY SOLUTIONS WITH LOW FRICTION PERFORMANCE

    Summer, F., Grün, F., Offenbecher, M., Taylor, S. & Lainé, E., 7 Jun 2017, Proceedings of the 6th European COnference on TRIBology. Ljubljana, Slovenia

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  159. E-pub ahead of print

    Application of √area-concept to assess fatigue strength of AlSi7Cu0.5Mg casted components

    Garb, C., Leitner, M. & Grün, F., 15 Mar 2017, (E-pub ahead of print) In: Engineering Fracture Mechanics. 185.2017, November, p. 61-71 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  160. Published

    A first proposal of a new high frequency testing method for high strength steels under tension / compression loading in the VHCF regime

    Milosevic, I., Winter, G., Grun, F. & Kober, M., 2017, VHCF7 - Seventh International Conference on Very High Cycle Fatigue.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  161. Published

    Fretting wear behavior of thermoplastic polyurethane (TPU)

    Wang, C., Hausberger, A., Pinter, G. G., Grun, F. & Schwarz, T., 2017, Proceedings WTC 2017.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  162. Published

    In-situ Testing of Wear and Fatigue on Gear Segments

    Grun, F., Koblmiller, T., Gódor, I. & Schadler, W., 2017, Proceedings of the 6th World Tribology Congress. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  163. Published

    Novel Gear Test Methodology to evaluate efficiency and durability

    Grun, F., Maier, B., Gódor, I. & Steinwender, F., 2017, Proceedings of the 6th European COnference on TRIBology. 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  164. Published

    Numerical and analytical studies of a shaker test system for fatigue testing

    Renhart, P., Milosevic, I. & Grun, F., 2017, DAS 34 - Proceedings. 3 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  165. Published

    Numerische und analytische Untersuchungen eines Shaker- Prüfsystems zur Ermüdungsprüfung

    Renhart, P., Milosevic, I., Himmelbauer, F. & Grun, F., 2017, Fortschritte in der Werkstoffprüfung für Forschung und Praxis: Prüftechnik - Kennwertermittlung - Schadensvermeidung. p. 91-96 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  166. Published

    Tribologische Kontaktsimulation elastomerer Dichtungswerkstoffe

    Hausberger, A., Krampl, H., Grün, F., Gódor, I., Pinter, G. G. & Schwarz, T., 2017, In: Tribologie und Schmierungstechnik. 64.2017, 1, p. 15-24 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  167. Published

    Untersuchung der lokalen Reibungsmechanismen von Polymer-Glas kontakten mittels in-situ Tribologie

    Stiller, T., Hausberger, A., Wang, C., Pinter, G. G., Gódor, I., Grun, F. & Schwarz, T., 2017, ÖTG 2017 Tagungsband. 2017, p. 55 68 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  168. 2016
  169. Published

    Journal bearing systems: Effect of lubricant viscosity on frictional losses and lifetime performance

    Summer, F., Grün, F., Godor, I., Offenbecher, M., Lainé, E. & Taylor, S., 23 Nov 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  170. Published

    Journal bearing systems: Effect of lubricant viscosity on frictional losses and lifetime performance

    Summer, F., Grün, F., Godor, I., Offenbecher, M., Lainé, E. & Taylor, S., 23 Nov 2016, Conference proceedings of ÖTG Symposium 2016. p. 127-134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  171. Published

    SIMULATIVE INVESTIGATIONS OF HIGHLY LOADED CONTACTS CONSIDERING SURFACE ROUGHNESS

    Moder, J. & Grün, F., 23 Nov 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  172. Published

    An elastohydrodynamic lubrication model considering surface roughness and mixed friction

    Moder, J., Grün, F. & Godor, I., 13 Oct 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  173. Published

    Herausforderungen und Potentiale bei der Auslegung von kurzfaserverstärkten Spritzgusskomponenten

    Mösenbacher, A. & Grün, F., 11 Oct 2016.

    Research output: Contribution to conference › Presentation › Research

  174. Published

    Laboratory Test Methodologies for Journal Slide Bearing Life Time Assessment

    Bergmann, P., Summer, F. & Grün, F., 22 Sept 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  175. Published

    Laboratory Test Methodologies for Journal Slide Bearing Life Time Assessment

    Summer, F., Bergmann, P. & Grün, F., 22 Sept 2016, Proceedings of 33rd Danubia-Adria Symposium. Portoroz, Slowenien, p. 106-107

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  176. Published

    Laboratory Test Methodologies for Journal Slide Bearing Life Time Assessment

    Summer, F., Bergmann, P. & Grün, F., 22 Sept 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  177. Published

    Parameter Optimization of a Deformation Model for Grey Cast iron

    Strohhäussl, B., Milosevic, I., Winter, G. & Grün, F., 21 Sept 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  178. Published

    Parameter Optimization of a Deformation Model for Grey Cast iron

    Strohhäussl, B., Winter, G. & Grün, F., 20 Sept 2016, The 33rd Danubia Adria Symposium: Advances in Experimental Mechanics. p. 50-51 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  179. Published

    Fatigue Strength Assessment of AlSi7Cu0.5Mg T6W Castings Supported by Computed Tomography Microporosity Analysis

    Garb, C., Leitner, M. & Grün, F., 17 Sept 2016, In: Procedia Engineering. 160.2016, p. 53-60 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  180. Published

    Fatigue Strength Assessment of AlSi7Cu0.5Mg T6W Castings Supported by Computed Tomography Microporosity Analysis

    Garb, C., Leitner, M. & Grün, F., 5 Sept 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  181. Published

    Reibung und Verschleiß technischer Kunststoffe "Möglichkeiten und Herausforderungen"

    Hausberger, A., Godor, I., Grün, F. & Pinter, G., 1 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  182. Published

    Thermo-mechanical fatigue influence of copper and silicon on hypo-eutectic Al–Si–Cu and Al–Si–Mg cast alloys used in cylinder heads

    Huter, P., Oberfrank, S., Grün, F. & Stauder, B., Jul 2016, In: International Journal of Fatigue. 88.2016, July, p. 144-155 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  183. Published

    Sind mittels laboratorischer Modellprüftechnik erzielte Ergebnisse verwertbar ?

    Grün, F., Godor, I., Moder, J., Bergmann, P. & Summer, F., 11 May 2016, p. 1-43.

    Research output: Contribution to conference › Presentation › Research

  184. Published

    Contact models for mixed friction simulation

    Moder, J. & Grün, F., 21 Apr 2016, MicroCAD: International Multidisciplinary Scientific Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  185. Published

    Methodology development for numerical evaluation of wear in tribological contacts

    Moder, J., Bergmann, P., Grün, F. & Godor, I., 21 Apr 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  186. Published

    Methodology development for numerical evaluation of wear in tribological contacts

    Bergmann, P., Grün, F., Godor, I. & Herbst, K., 21 Apr 2016, The Publications of the MultiScience - XXX. microCAD International Multidisciplinary Scientific Conference University of Miskolc, 21-22 April, 2016. 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  187. Published

    AT516367 (A1) - Prüfstand und Prüfverfahren mit verstellbarem Achsabstand zwischen Übertragungsprüfkörpern

    Grun, F. (Inventor) & Gódor, I. (Inventor), 15 Apr 2016, IPC No. G01M13/02, Patent No. AT516367, 18 Jan 2018, Priority date 18 Sept 2014, Priority No. AT20140050659

    Research output: Patent

  188. Published

    DE102015115719 (A1) - Prüfstand und Prüfverfahren mit verstellbarem Achsabstand zwischen Übertragungsprüfkörpern

    Grun, F. (Inventor) & Gódor, I. (Inventor), 24 Mar 2016, IPC No. G01M13/02, Patent No. DE102015115719 (A1), Priority date 18 Sept 2014, Priority No. AT20140050659

    Research output: Patent

  189. Published

    Reibungsreduktion ins hochbelasteten, geschmierten Kontatken durch Kugelstrahlen

    Moder, J. & Grün, F., 20 Mar 2016, GETLUB 2016: Tribologie- und Schmierstoffkongress. p. 391 403 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  190. Published

    High- and low-cycle fatigue influence of silicon, copper, strontium and iron on hypo-eutectic Al-Si-Cu and Al-Si-Mg cast alloys used in cylinder heads

    Huter, P., Renhart, P., Oberfrank, S., Schwab, M., Grün, F. & Stauder, B., 1 Jan 2016, In: International Journal of Fatigue. 82.2016, January, Part 3, p. 588-601 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  191. Published

    Contact models for mixed friction simulation

    Moder, J. & Grün, F., 2016, In: Design of Machines and Structures. 6, 1, p. 48-55 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  192. Published

    Contact models for mixed friction simulation

    Moder, J. & Grün, F., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  193. Published

    Experimental evaluation of cutting forces for chipping process and developement of wood material model

    Pichler, P., Leitner, M., Grün, F. & Guster, C., 2016, CD-ROM Proceedings of the World Conference on Timber Engineering: WCTE 2016. Eberhardsteiner, J., Winter, W., Fadai, A. & Pöll, M. (eds.). 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  194. Published

    Experimental evaluation of cutting forces for chipping process and development of wood material model

    Pichler, P., Leitner, M., Grün, F. & Guster, C., 2016, WCTE 2016 - World Conference on Timber Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  195. Published

    Influence of size effect and stress gradient on the high-cycle fatigue strength of a 1.4542 steel

    Milosevic, I., Winter, G., Grun, F. & Kober, M., 2016, In: Procedia Engineering. 160, p. 61-68

    Research output: Contribution to journal › Article › Research › peer-review

  196. Published

    Influence of Size Effect and Stress Gradient on the High-cycle Fatigue Strength of a 1.4542 Steel

    Milosevic, I., Winter, G., Grün, F. & Kober, M., 2016, In: Procedia Engineering. 160, p. 61-68

    Research output: Contribution to journal › Article › Research › peer-review

  197. Published

    Influence of Size Effect and Stress Gradient on the High-cycle Fatigue Strength of a 1.4542 Steel

    Milosevic, I., Winter, G., Grün, F. & Kober, M., 2016, p. 61-68.

    Research output: Contribution to conference › Presentation › Research › peer-review

  198. Published

    Mechanical post-treatment of induction-hardened surface layers to optimize fatigue strength of crankshafts

    Leitner, M., Tuncali, Z., Chen, W. & Grün, F., 2016.

    Research output: Contribution to conference › Presentation › Research

  199. Published

    Methodology development for numerical evaluation of wear in tribological contacts

    Bergmann, P., Grün, F., Godor, I. & Herbst, K., 2016, In: Design of Machines and Structures. 6, 1, p. 5-14 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  200. Published

    Modeling Wear of Journal Bearings

    Bergmann, P. & Grün, F., 2016. 6 p.

    Research output: Contribution to conference › Paper

  201. Published

    Modeling Wear of Journal Bearings

    Bergmann, P. & Grün, F., 2016.

    Research output: Contribution to conference › Poster › Research

  202. Published

    Multiaxial fatigue assessment of crankshafts by local stress and critical plane approach

    Leitner, M., Grün, F., Tuncali, Z., Steiner, R. & Chen, W., 2016, In: Frattura ed Integrità Strutturale .

    Research output: Contribution to journal › Article › Research › peer-review

  203. Published

    Multiaxial fatigue assessment of crankshafts by local stress approaches

    Leitner, M., Tuncali, Z., Steiner, R., Chen, W. & Grün, F., 2016.

    Research output: Contribution to conference › Presentation › Research

  204. Published

    Multiaxial fatigue assessment of crankshafts by local stress approaches

    Leitner, M., Tuncali, Z., Steiner, R., Chen, W. & Grün, F., 2016, 11th International Conference on Multiaxial Fatigue & Fracture.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  205. Published

    Reibungsreduktion ins hochbelasteten, geschmierten Kontatken durch Kugelstrahlen

    Moder, J. & Grün, F., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  206. Published

    SIMULATIVE INVESTIGATIONS OF HIGHLY LOADED CONTACTS CONSIDERING SURFACE ROUGHNESS

    Moder, J. & Grün, F., 2016, Tagungsband ÖTG Symposium 2016.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  207. Published

    Sind mittels laboratorischer Modellprüftechnik erzielte Ergebnisse verwertbar ?

    Grün, F., Godor, I., Moder, J., Bergmann, P. & Summer, F., 2016, Proceedings des DVM Arbeitskreises Zuverlässigkeit tribologischer Systeme. p. 1-43

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  208. Published

    Validation of Experimental Tests and Simulations of Cutting Forces during Woodworking

    Pichler, P., Leitner, M. & Grün, F., 2016, WCCM XII & APCOM VI. p. 1220 1224 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  209. Published

    Validation of Experimental Tests and Simulations of Cutting Forces during Woodworking

    Pichler, P., Leitner, M. & Grün, F., 2016, p. 1220. 1224 p.

    Research output: Contribution to conference › Presentation › Research

  210. Published

    Wear detection by acoustic emissions

    Bergmann, P., Grün, F. & Stadler, G., 2016, Tribologie in Industrie und Forschung: Vortragsunterlagen. Franek, F., Pauschitz, A. & Badisch, E. (eds.). 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  211. Published

    Wear detection by acoustic emissions

    Bergmann, P., Grün, F. & Stadler, G., 2016.

    Research output: Contribution to conference › Presentation › Research

  212. 2015
  213. Published

    START-STOP OPERATION AS INFLUENCE FACTOR ON PLAIN BEARING LIFETIME

    Summer, F., Grün, F., Offenbecher, M. & Lainé, E., 4 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  214. Published

    Tribological study of crankshaft bearing systems: Comparison of forged steel and cast iron counterparts under start–stop operation

    Summer, F., Grün, F., Schiffer, J., Godor, I. & Papadimitriou, I., 8 Jul 2015, In: Wear. 338-339, p. 232-241

    Research output: Contribution to journal › Article › Research › peer-review

  215. Published

    Simulative Investigations of a Close-to-Component Journal Bearing System and Comparison with Test Data

    Bergmann, P., Grün, F., Godor, I. & Hager, G., 5 Jun 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  216. Published

    Tribometric assessment of start stop journal bearing wear with the aid of a component close test methodology

    Summer, F., Grün, F., Godor, I., Offenbecher, M. & Lainé, E., 3 Jun 2015, Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  217. Published

    Influence of Manufacturing Technology on the Loadability of Gear Systems

    Grün, F., Godor, I. & Dietrich, A., 17 Apr 2015, Proceedings of the European All-Wheel Drive Congress 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  218. Published

    Development of Ring on Disc Tests for Elastomeric Sealing Materials

    Hausberger, A., Grün, F., Godor, I., Pinter, G. & Schwarz, T., 2015, Proceedings of the International Tribology Conference 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  219. Published

    Fatigue assessment of universal cardan joint based on laboratory specimen tests

    Palma, P., Leitner, M. & Grün, F., 2015.

    Research output: Contribution to conference › Paper

  220. Published

    Integration of Local Material Properties into Fatigue Design for Engineering Materials

    Kainzinger, P., Grün, F., Redik, S. & Mösenbacher, A., 2015.

    Research output: Contribution to conference › Presentation › Research

  221. Published

    Investigation of Influences on the Material Behavior of sgfr Plastics based on a Local S/N-curves Concept

    Primetzhofer, A., Mösenbacher, A., Grün, F. & Koblmiller, T., 2015.

    Research output: Contribution to conference › Poster › Research

  222. Published

    Technische Polymere für Tribo-Anwendungen Möglichkeiten und Herausforderungen

    Hausberger, A., Godor, I., Grün, F. & Pinter, G., 2015.

    Research output: Contribution to conference › Presentation › Research

  223. Published

    Tribological in-situ evaluation of lubricated contacts of real-life engineering materials

    Grün, F., Godor, I., Summer, F., Bergmann, P. & Moder, J., 2015, Proceedings of 3rd OilDoc Conference and Exhibition. Rosenheim

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  224. Published

    Tribologie im Motorenbau

    Grün, F., 2015, Neue Technologien und Innovationen in der Fahrzeugtechnik XII - Proceedings. Steyr

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  225. 2014
  226. E-pub ahead of print

    Einfluss der lokalen Gefügeausbildung auf die Schwingfestigkeit von Gusseisen mit Kugelgraphit

    Kainzinger, P., Wohlfahrt, M. & Grün, F., 6 Dec 2014, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 160.2015, 1, p. 2-8 7 p.

    Research output: Contribution to journal › Article › Research

  227. Published

    Tribological modeltesting in powertrains

    Grün, F., Godor, I. & Krampl, H., 7 Nov 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  228. Published

    Auslegung von Bauteilen mit "realen" Werkstoffen

    Kainzinger, P., Grün, F., Redik, S. & Mösenbacher, A., 24 Oct 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  229. Published

    Mean Stress Sensitivity of Ductile Iron with respect to Technological and Statistical Size Effect Considerung Defects

    Kainzinger, P. & Grün, F., 13 Jun 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  230. Published

    Mechanisms of fatigue-crack initiation and their impact on fatigue life of AlSi7 die-cast-components

    Redik, S., Tauscher, M. & Grün, F., 13 Jun 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  231. Published

    Assessment of the effect of tensile Overloads on the Fatigue Behaviour of quenched and tempered Steel

    Garb, C., Strohhaüssl, B., Winter, G. & Grün, F., 1 Jan 2014, 31st Danubia-Adria Symposium on Advances in Experimental Mechanics, DAS 2014 - Proceedings. p. 30-31 2 p. (31st Danubia-Adria Symposium on Advances in Experimental Mechanics, DAS 2014 - Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  232. Published

    Assessment of the effect of tensile overloads on the fatigue behaviour of quenched and tempered steel

    Garb, C., Grün, F., Winter, G. & Strohhäussl, B., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  233. Published

    Comparison of microstructural crack paths between hypo-eutectic Al-Si-Cu and Al-Si-Mg cast alloys in high plasticity regimes under rotating bending

    Huter, P., Winter, G., Renhart, P., Schwab, M., Oberfrank, S., Grün, F. & Stauder, B., 2014, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 618, p. 578-585

    Research output: Contribution to journal › Article › Research › peer-review

  234. Published

    Contact fatigue life investigations and wear mechanisms of gears with different steels and hardening process

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2014, 5th World Tribology Congress, WTC 2013. Vol. 3. p. 2620-2623 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  235. Published

    Efficient material development for elastomeric sealing materials via the correlation between tribological model tests and component testing

    Hausberger, A., Godor, I. & Grün, F., 2014, Book of Abstracts of Asiatrib 2014. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  236. Published

    Leichtbau durch optimale Ausnutzung des Werkstoffs am Beispiel von Gusseisen mit Kugelgraphit

    Kainzinger, P. & Grün, F., 2014, In: Gießerei-Rundschau. 61, p. 347-352

    Research output: Contribution to journal › Article › Research › peer-review

  237. Published

    Leichtbau durch optimale Ausnutzung des Werkstoffs am Beispiel von Gusseisen mit Kugelgraphit

    Kainzinger, P. & Grün, F., 2014, Gießen als Innovatsionsträger bei der Bauteilentwicklung: Material- und Energieeffizienz. p. 27-27

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  238. Published

    Maschinenbau, Werkstoffkompetenz und Werkstoffanwendung - Tribologische Aufgabenstellungen

    Grün, F., Galler, R., Prenner, M., Supancic, P., Mitterer, C., Ebner, R., Hausberger, A., Schlögl, S., Buchmayr, B., Godor, I., Leitner, M. & Krampl, H., 2014, Tribologie in Industrie und Forschung: Werkstoffe, Konstruktion und Technologie. p. 3-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  239. Published

    Maschinenbau, Werkstoffkompetenz und Werkstoffanwendung - Tribologische Aufgabenstellungen

    Grün, F., Galler, R., Prenner, M., Supancic, P., Mitterer, C., Ebner, R., Hausberger, A., Schlögl, S., Buchmayr, B., Godor, I., Leitner, M. & Krampl, H., 2014.

    Research output: Contribution to conference › Presentation › Research

  240. Published

    Methodology for Design and Evaluation of highly loaded Hertzian Contacts

    Grün, F., Krampl, H., Godor, I. & Trausmuth, A., 2014, Proceedings of 19th International Colloquium Tribology. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  241. Published

    Numerical and experimental investigation of non-conformal lubricated contacts

    Moder, J., Krampl, H. & Grün, F., 2014.

    Research output: Contribution to conference › Presentation › Research

  242. Published

    Optimierung tribologischer Testmethoden für die Dichtungstechnik

    Hausberger, A., Godor, I., Grün, F., Pinter, G. & Schwarz, T., 2014, Tribologie in Industrie und Forschung: Werkstoffe, Konstruktion und Technologie. p. 17-24

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  243. Published

    Tribological analysis of lubricated non-conforming contacts

    Moder, J., Krampl, H. & Grün, F., 2014, Tribologie in Industrie und Forschung: Werkstoffe, Konstruktion und Technologie. p. 137-142

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  244. Published

    Tribological Contact Loadings of Sealing Materials

    Hausberger, A., Krampl, H., Godor, I., Grün, F. & Schwarz, T., 2014, Proceedings of 19th International Colloquium Tribology. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  245. Published

    Tribological investigations of journal bearings by means of a close to component test methodology

    Bergmann, P., Summer, F., Grün, F., Godor, I., Offenbecher, M. & Lainé, E., 2014, Tribologie in Industrie und Forschung. Werkstoffe, Konstruktion und Technologie. Vortragsunterlagen. p. 113-121

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  246. Published

    Tribological performance of forged steel and cast iron crankshafts on model scale

    Summer, F., Grün, F., Schiffer, J., Gódor, I. & Papadimitriou, I., 2014, 5th World Tribology Congress, WTC 2013. Vol. 3. p. 2155-2158 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  247. Published

    Tribometric performance of polymer overlays by contrast with other bearing materials

    Summer, F., Grün, F., Godor, I., Offenbecher, M. & Lainé, E., 2014, Symposium 2014 - Tribologie in Industrie und Forschung. p. 159-166

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  248. 2013
  249. Published

    Applicability of ring-on-disc and pin-on-plate test methods for Cu-steel and Al-steel systems for large area conformal contacts

    Pondicherry, K. S., Grün, F., Gódor, I., Bertram, R. & Offenbecher, M., Apr 2013, In: Lubrication science. 25, 3, p. 231-247 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  250. Published

    Applicability of Ring-on-Disc and Pin-on-Plate Test Methods for Cu-Steel and Al-Steel Systems for Lare Area Conformal Contacts

    Pondicherry, K., Grün, F., Godor, I., Bertram, R. & Offenbecher, M., 2013, In: Lubrication science. p. 1-1

    Research output: Contribution to journal › Article › Research › peer-review

  251. Published

    BERECHNUNGSANSATZ FÜR REIBDAUERERMÜDUNG

    Christiner, T., Reiser, J., Maier, B., Grün, F., Godor, I., Trieb, F., Stühlinger, R. & Herbst, K., 2013, In: Automobiltechnische Zeitschrift : ATZ . 115, 12, p. 1000-1006

    Research output: Contribution to journal › Article › Research › peer-review

  252. Published

    Calculation Approach for the Assessment of Fretting

    Christiner, T., Reiser, J., Maier, B., Grün, F., Godor, I., Trieb, F., Stühlinger, R. & Herbst, K., 2013, In: ATZ worldwide. 115, 12, p. 39-43

    Research output: Contribution to journal › Article › Research › peer-review

  253. Published

    Comprehensive Study of ZDDP-tribofilms Formed under Soft Contact Conditions

    Pondicherry, K., Grün, F., Summer, F., Godor, I., Lainé, E. & Offenbecher, M., 2013, Proceedings of 5th World Tribology Congress (WTC). p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  254. Published

    Contact fatigue life and wear mechanisms of case hardened and nidrided steels

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2013, Proceedings of Baltmatrib 2013. p. 18-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  255. Published

    Contact fatigue life investigations and wear mechanisms of different case hardened surfaces under rolling contact loading for gears

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2013, VDI Berichte 2199.1. p. 497-509

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  256. Published

    Damage oriented tribological model testing for internal combustion engines – Design of laboratory test strategies

    Grün, F., Godor, I., Schiffer, J., Trausmuth, A. & Krampl, H., 2013, In: Tribologie und Schmierungstechnik. 60, p. 5-12

    Research output: Contribution to journal › Article › Research › peer-review

  257. Published

    Investigations of Wear on System Camshaft/Tappet

    Wohlfahrt, M., Grün, F. & Godor, I., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  258. Published

    Kontaktermüdung und Verschleiß von einsatzgehärteten Stählen und Nitrierschichten

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2013, Proceedings der Tribologie Fachtagung 2013 der Gesellschaft für Tribologie (GfT). p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  259. Published

    Nano-Mechanical and Chemical Characterization of Tribofilms Formed Under Conformal Contact Conditions

    Pondicherry, K., Schöberl, T., Grün, F., Summer, F., Godor, I., Lainé, E. & Offenbecher, M., 2013, Proceedings of 68th Annual STLE Meeting. p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  260. Published

    Novel trends in journal slide bearing technology - active use of tribochemical effects

    Offenbecher, M., Li, H., Lainé, E., Grün, F. & Pondicherry, K., 2013, Proceedings of CIMAC World Congress on Combustion Engine Technology. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  261. Published

    Optimization of the piston ring - cylinder liner system in gas-engines for power generation

    Schiffer, J., Krampl, H., Godor, I., Grün, F., Betz, M. & Laiminger, S., 2013, 27th CIMAC World Congress on Combustion Engine Technology. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  262. Published

    Tribological performance of forged steel and cast iron crankshafts on model scale

    Summer, F., Grün, F., Schiffer, J., Godor, I. & Papadimitriou, I., 2013, World Tribology Congress 2013. p. 753-756

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  263. Published

    Tribological performance of forged steel and cast iron crankshafts on model scale

    Summer, F., Grün, F., Schiffer, J., Godor, I. & Papadimitriou, I., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  264. Published

    Tribological test principles for power train applications

    Grün, F., Godor, I., Schiffer, J., Krampl, H. & Trausmuth, A., 2013, Proceedings of 2nd Oildoc Conference and Exhibition. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  265. Published

    Tribometric Development Tools for Journal Bearings – a novel test adapter

    Grün, F., Krampl, H., Schiffer, J., Moder, J., Godor, I. & Offenbecher, M., 2013, Proceedings of 5th World Tribology Congress (WTC). p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  266. Published

    Vom tribologischen Modellversuch zur Bauteilprüfung

    Hausberger, A., Godor, I., Grün, F., Pinter, G. & Schwarz, T., 2013, 22. Leobener Kunststoff-Kolloquium: Oberflächen und Grenzflächen in der Polymertechnologie. p. 150-157

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  267. 2012
  268. Published

    Tribological functionality of aluminium sliding materials with hard phases under lubricated conditions

    Grün, F., Summer, F., Pondicherry, K. S., Gódor, I., Offenbecher, M. & Lainé, E., 1 Dec 2012, In: Wear. 298-299.2013, 15 February, p. 127-134 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  269. Published

    3rd Fatigue Sypmposium, Lightweight Design

    Eichlseder, W. (Editor) & Grün, F. (Editor), 2012, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  270. Published

    Comparison of Fatigue Behavior of Different Materials under Rolling Contact Fatigue

    Magritzer, M., Wohlfahrt, M., Guster, C., Godor, I. & Grün, F., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  271. Published

    Damage oriented tribological model testing for internal combustion engines - Design of laboratory test strategies

    Grün, F., Godor, I., Schiffer, J., Pondicherry, K., Trausmuth, A. & Krampl, H., 2012, Technische Akademie Esslingen. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  272. Published

    Design of test methodologies for fretting investigations

    Strohhäussl, B., Reiser, J., Godor, I. & Grün, F., 2012, 3rd Fatigue Symposium - Lightweight Design. p. 287-294

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  273. Published

    Effect of counterpart material on the tribological performances of Al- and Cu-based sliding materials

    Summer, F., Grün, F., Pondicherry, K., Godor, I., Offenbecher, M. & Lainé, E., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  274. Published

    Effect of counterpart material on the tribological performances of Al- and Cu-based sliding materials

    Summer, F., Grün, F., Pondicherry, K., Godor, I., Offenbecher, M. & Lainé, E., 2012, 3rd Fatigue Symposium Leoben Conference Transcript. p. 311-314

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  275. Published

    Fatigue Life Investigations of Different Case Hardened Specimens under Rolling Contact Loading for Gears

    Trausmuth, A., Godor, I., Stoschka, M., Dietrich, A., Grün, F. & Eichlseder, W., 2012, 3rd Fatigue Sypmposium. p. 295-310

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  276. Published

    Fatigue Life Investigations of Differently Hardened Specimens in Lubricated Tribological Rolling Contacts

    Trausmuth, A., Godor, I., Grün, F., Stoschka, M., Dietrich, A. & Eichlseder, W., 2012, Technische Akademie Esslingen. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  277. Published

    Numerical and experimental investigation of non-conformal lubricated contects

    Krampl, H., Grün, F. & Godor, I., 2012, Nordic Symposium on Tribology. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  278. Published

    Optimierung geschmierter Tribokontakte auf Basis tribometrischer und numerischer Untersuchungen

    Krampl, H., Grün, F. & Godor, I., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  279. Published

    Rechnerische und experimentelle Untersuchung der Schmierfilmbildung in Tribokontakten mittels kommerzieller Softwarepakete

    Krampl, H., Grün, F. & Godor, I., 2012, In: Tribologie und Schmierungstechnik. 59, p. 7-12

    Research output: Contribution to journal › Article › Research › peer-review

  280. Published

    Simulation of tribological functionality of heterogeneous tribomaterials

    Grün, F., Godor, I., Sailer, W. & Gänser, H.-P., 2012, In: Tribology International. 46, p. 119-127

    Research output: Contribution to journal › Article › Research › peer-review

  281. Published

    Synergy between secondary phases in aluminium based tribomaterials and lubrucant additives

    Pondicherry, K., Grün, F., Summer, F., Godor, I., Lainé, E. & Offenbecher, M., 2012, 15th Nordic Symposium on Tribology. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  282. Published

    Tribological funtionality of aluminium sliding materials with hard phases under lubricated conditions

    Grün, F., Summer, F., Pondicherry, K., Godor, I., Lainé, E. & Offenbecher, M., 2012, In: Wear. p. 127-134

    Research output: Contribution to journal › Article › Research › peer-review

  283. Published

    Tribological testing of lubricated mechanical contacts

    Grün, F., Godor, I., Schiffer, J., Krampl, H. & Pondicherry, K., 2012, 3rd Fatigue Sypmposium. p. 266-267

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  284. Published

    Visualization of the processes taking place in the contact zone with in-situ tribometry

    Grün, F., Sailer, W. & Godor, I., 2012, In: Tribology International. 48, p. 44-53

    Research output: Contribution to journal › Article › Research › peer-review

  285. 2011
  286. Published

    Aluminum Based Sliding Materials with Soft Phases-Intrinsic For-giving Overload Behavior?

    Grün, F., Gódor, I. & Eichlseder, W., 3 Feb 2011, Friction, Wear and Wear Protection: International Symposium on Friction, Wear and Wear Protection 2008 Aachen, Germany. Wiley-VCH , p. 45-51 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  287. Published

    AP3: Optimierung der Ventiltriebe von Großmotoren hinsichtlich Lebensdauer und Optimierung der Reibungsverluste

    Godor, I., Grün, F. & Magritzer, M., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  288. Published

    Describing different operating regimes of journal bearing materials by pressure velocity diagrams derived from ring-on-disc model testing

    Grün, F., Godor, I., Gärtner, W. & Eichlseder, W., 2011, In: Proceedings of the Institution of Mechanical Engineers. Part J, Journal of engineering tribology. p. 617-626

    Research output: Contribution to journal › Article › Research › peer-review

  289. Published

    Functionality of heterogeneous sliding materials for conformal contacts

    Grün, F., 2011

    Research output: Thesis › Habilitation thesis › peer-review

  290. Published

    Interactions between heterogeneous aluminium sliding materials and lubricants

    Grün, F., Summer, F., Pondicherry, K., Godor, I., Lainé, E. & Offenbecher, M., 2011, Proceedings of ECOTRIB Conference 2011. p. 703-708

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  291. Published

    Microscopy study of tribofilms formed on lubricated surfaces under different contact conditions

    Pondicherry, K., Grün, F., Godor, I., Krampl, H., Lainé, E. & Offenbecher, M., 2011, Proceedings of ECOTRIB Conference 2011. p. 575-580

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  292. Published

    Novel methodology for the calculation of local loadings in lubricated heterogeneous tribosystems

    Krampl, H., Grün, F. & Godor, I., 2011, Proceedings of ECOTRIB Conference 2011. p. 709-714

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  293. Published

    Rheologische Flüssigkeitsmodelle für Hertzsche Kontakte und deren messtechnische Validierung

    Krampl, H., Grün, F. & Godor, I., 2011, Proceedings Symposium 2011 der Österreichischen Tribologischen Gesellschaft. p. 97-104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  294. Published

    Tribological performance of thin overlays for journal bearings

    Grün, F., Godor, I., Gärtner, W. & Eichlseder, W., 2011, In: Tribology International. 44, p. 1271-1280

    Research output: Contribution to journal › Article › Research › peer-review

  295. Published

    Tribologische Versuche an Gleitwerkstoffen

    Grün, F., Summer, F. & Godor, I., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  296. Published

    Tribologische Wirkungsweisen sekundärer Hart- und Weichphasen in geschmierten, aluminiumbasierten Gleitsystemen

    Summer, F., Grün, F., Pondicherry, K., Godor, I., Lainé, E. & Offenbecher, M., 2011, Proceedings Symposium 2011 der Österreichischen Tribologischen Gesellschaft. p. 57-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  297. Published

    Visualization of the processes taking place in the contact zone with in-situ tribometry

    Grün, F., Sailer, W. & Godor, I., 2011, In: Tribology International. p. 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  298. 2010
  299. Published

    Tribologische funktionsweise von ungefüllten und gefüllten TPU-dictungsmaterialen - Ein erfahrungsbericht

    Gódor, I., Schiffer, J., Grün, F., Major, Z. & Schwarz, T., 1 Dec 2010, In: Tribologie und Schmierungstechnik. 57, 4, p. 21-27 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  300. Published

    A Model Scale Test Method for the Piston Ring - Cylinder Liner Tribosystem of Internal Combustion Engines

    Schiffer, J., Godor, I., Grün, F. & Eichlseder, W., 2010, In: The archive of mechanical engineering : quarterly (Archiwum budowy maszyn). 57, p. 331-341

    Research output: Contribution to journal › Article › Research › peer-review

  301. Published

    Analyse der Schmierfilmbildung tribologischer Modellsysteme mithilfe kommerzieller Softwarepakete

    Krampl, H., Grün, F. & Godor, I., 2010, Wettbewerbsvorsprung durch tribologische Innovationen Beherrschung von Reibung und Verschleiß durch Oberflächen- u. Schmierstofftechnik. p. 127-136

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  302. Published

    Bewertung des tribologischen Verhaltens von unterschiedlich modifizierten Grauguss-Zylinderlaufbahnen auf Modellmaßstab

    Schiffer, J., Godor, I., Grün, F., Eichlseder, W., Dibiasi, W. & Strobl, V., 2010, Zylinderlaufbahn, Kolben, Pleuel - Innovative Systeme im vergleich; VDI-Berichte 2109. p. 297-300

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  303. Published

    Bewertung des tribologischen Verhaltens von unterschiedlich modifizierten Grauguß-Zylinderlaufbuchsen auf Modellmaßstab

    Schiffer, J., Godor, I., Grün, F., Eichlseder, W., Dibiasi, W. & Strobl, V., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  304. Published

    Characterization and simulation of tribological functionality of heterogeneous tribomaterials

    Grün, F., Godor, I., Sailer, W. & Schiffer, J., 2010, 37th Leeds-Lyon Symposium 2010 - Synopses. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  305. Published

    Design of a novel methodology for in-situ-investigation of contact conditions

    Sailer, W., Grün, F., Godor, I. & Gänser, H.-P., 2010, Design of a novel methodology for in-situ-investigation of contact conditions. p. 55-55

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  306. Published

    Elucidating the Differences between Ring-on-Disc and Pin-on-Plate Tribometric Test Approaches

    Pondicherry, K., Grün, F., Godor, I., Bertram, R. & Offenbecher, M., 2010, 37th Leeds-Lyon Symposium 2010 - Synopses. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  307. Published

    Experimental Definition of a Failure Model for the Tribological Behavior of PTFE Bronze Compounds

    Godor, I., Major, Z., Grün, F. & Vezer, S., 2010, In: Journal of tribology (Transactions of the ASME). p. 807-815

    Research output: Contribution to journal › Article › Research › peer-review

  308. Published

    Investigation of operating ranges for lubricated large-area contacts using ring-on-disc test configuration

    Grün, F., Godor, I., Gärtner, W. & Eichlseder, W., 2010, 14th Nordic Symposium on Tribology - Abstracts. p. 70-70

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  309. Published

    Investigation of tribological damage mechanisms of various slide bearing materials used in medium speed and low speed diesel engines on the microscopic and macroscopic scale

    Offenbecher, M., Gärtner, W., Gumpoldsberger, R., Aufischer, R., Grün, F. & Godor, I., 2010, Proceedings of CIMAC Congress 2010. p. 276/1-276/12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  310. Published

    Model scale generation and microscopic characterisation of tribofilms formed on Fe and Cu alloys

    Grün, F., Godor, I., Javidi, A., Pondicherry, K., Offenbecher, M. & Bertram, R., 2010, In: Lubrication science. 22, 6-7, p. 237-250

    Research output: Contribution to journal › Article › Research › peer-review

  311. Published

    Schädigungsäquivalente Prüfmethodik für das Tribosystem Kolbenring-Zylinderlaufbahn von Großmotoren

    Schiffer, J., Godor, I., Grün, F. & Eichlseder, W., 2010, In: Tribologie und Schmierungstechnik. 57, p. 37-42

    Research output: Contribution to journal › Article › Research › peer-review

  312. Published

    Tribological behaviour of unfilled and filled TPU materials

    Godor, I., Schiffer, J., Grün, F., Schwarz, T. & Major, Z., 2010, 14th Nordic Symposium on Tribology - Abstracts. p. 59-59

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  313. Published

    Tribologische Funktionsweise von ungefüllten und gefüllten TPU-Dichtungsmaterialien - ein Erfahrungsbericht

    Godor, I., Schiffer, J., Major, Z., Grün, F. & Schwarz, T., 2010, In: Tribologie und Schmierungstechnik. 57, p. 21-27

    Research output: Contribution to journal › Article › Research › peer-review

  314. Published

    Tribometrie von Grenzschichten in großflächigen Kontakten - Methodik zur Erzeugung von Tribofilmen und begleitende Analytik

    Grün, F., Godor, I., Javidi, A. & Pondicherry, K., 2010, In: Tribologie und Schmierungstechnik. 57, p. 5-11

    Research output: Contribution to journal › Article › Research › peer-review

  315. 2009
  316. Published

    Anwendung einer Prüfmethodik zur tribologischen Untersuchung des Systems Kolbenring-Zylinderlaufbahn von Großmotoren

    Schiffer, J., Godor, I., Grün, F., Krampl, H., Eichlseder, W., Dibiasi, W. & Strobl, V., 2009, Tribologie Fachtagung 2009: Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  317. Published

    Application of conductive AFM technique to measure electrical conductance of tribofilms

    Pondicherry, K., Beinik, I., Grün, F., Godor, I. & Teichert, C., 2009, Proceedings of 26th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 205-206

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  318. Published

    Application of conductive AFM technique to measure electrical conductance of tribofilms

    Pondicherry, K., Beinik, I., Grün, F., Godor, I. & Teichert, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  319. Published

    Development of a test methodology for the system piston ring - cylinder liner

    Schiffer, J., Godor, I., Grün, F. & Eichlseder, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  320. Published

    Development of a test methodology for the system piston ring - cylinder liner

    Schiffer, J., Godor, I., Grün, F. & Eichlseder, W., 2009, Proceedings of 26th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 199-200

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  321. Published

    Einige Gesetzmäßigkeiten über das tribologische Verhalten von ungefüllten und gefüllten TPU-Materialien

    Godor, I., Schiffer, J., Grün, F., Major, Z. & Schwarz, T., 2009, Tribologie Fachtagung 2009: Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  322. Published

    Experimental definition of a failure model for the tribological behaviour of polytetrafluorethylene bronze compounds

    Godor, I., Major, Z., Vezér, S. & Grün, F., 2009, In: Proceedings of the Institution of Mechanical Engineers. Part J, Journal of engineering tribology. 223, p. 807-815

    Research output: Contribution to journal › Article › Research › peer-review

  323. Published

    Experimental methods to investigate the run-ning-in properties of soft coatings

    Grün, F., Godor, I. & Eichlseder, W., 2009, Proceedings of 26th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 273-274

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  324. Published

    Experimental methods to investigate the run-ning-in properties of soft coatings

    Grün, F., Godor, I. & Eichlseder, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  325. Published

    Experimental methods to investigate the running-in properties of soft coatings

    Grün, F., Gódor, I. & Eichlseder, W., 2009, 26th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 273-274 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  326. Published

    Fundamentals of optimizing Aluminium-based journal bearing materials

    Grün, F., Godor, I. & Eichlseder, W., 2009, In: Proceedings of the Institution of Mechanical Engineers. Part J, Journal of engineering tribology. 223, p. 777-785

    Research output: Contribution to journal › Article › Research › peer-review

  327. Published

    Funktionsweise und Gebrauchsdauer von Gleitlagerwerkstoffen

    Grün, F., Godor, I., Gärtner, W. & Eichlseder, W., 2009, Lebensdauer und Energieeffizienz. p. 127-135

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  328. Published

    Gleitlagerspezifische Werkstoffeigenschaften und ihre Charakterisierung (material properties specific to journal bearings and their characterisation)

    Gärtner, W., Grün, F. & Godor, I., 2009, VDI Bericht 2069. p. 197-208

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  329. Published

    Influence of overlays on the tribological behavior of journal bearing materials

    Grün, F., Godor, I., Gärtner, W. & Eichlseder, W., 2009, Proceedings of World Tribology Conference (WTC) 2009. p. 131-131

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  330. Published

    Influence of the microstructure on the tribological properties of TPU seal materials

    Godor, I., Grün, F., Major, Z., Hausberger, A. & Schwarz, T., 2009, Proceedings of European Polymer Congress, 2009. p. 197-197

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  331. Published

    New insight into tribofilm formation and its tribometric visualization

    Grün, F., Godor, I., Javidi, A. & Pondicherry, K., 2009, Proceedings of Europeen Conference on Tribology (Ecotrib) 2009. p. 541-546

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  332. Published

    Schädigungsäquivalente tribologische Untersuchungen zur Erhöhung der Zuverlässigkeit des Systems Kolbenring/Zylinderlaufbahn

    Schiffer, J., Godor, I., Grün, F., Dibiasi, W., Strobl, V. & Eichlseder, W., 2009, Lebensdauer und Energieeffizienz. p. 89-96

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  333. Published

    Towards understanding of interactions and layer formation between lubricated mating surfaces

    Pondicherry, K., Grün, F. & Godor, I., 2009, Lebensdauer und Energieeffizienz. p. 169-179

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  334. Published

    Tribologisches Verhalten einer Gleitschicht (1)

    Grün, F. & Godor, I., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  335. Published

    Tribologisches Verhalten einer Gleitschicht (2)

    Grün, F. & Godor, I., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  336. Published

    Tribologisches Verhalten einer Gleitschicht (3)

    Grün, F. & Godor, I., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  337. Published

    Tribologisches Verhalten einer Gleitschicht (4)

    Grün, F. & Godor, I., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  338. Published

    Tribologisches Verhalten einer Gleitschicht (5)

    Grün, F. & Godor, I., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  339. Published

    Tribologisches Verhalten eines Cu-Basis Gleitwerkstoffes

    Grün, F. & Godor, I., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  340. Published

    Vergleichende Losreißversuche an einem tribologischen Ersatzmodell Block-on-Plate - Teil 2

    Grün, F., Sailer, W. & Godor, I., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  341. 2008
  342. Published

    A novel test methodology for optimizing metallic journal bearing materials

    Grün, F., Godor, I., Gärtner, W. & Eichlseder, W., 2008, Nordtrib 2008; 13th Nordic Symposium on Tribology. p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  343. Published

    Charakterisierung von tribologischen Grenzschichten mittels Rasterelektronenmikroskopie

    Grün, F., Godor, I. & Sailer, W., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  344. Published

    Designing Test Methods and Deriving the Events Taking Place in Differently Designed Tribomaterials

    Grün, F., Godor, I. & Eichlseder, W., 2008, Lubricants, Materials and Lubrication Engineering. p. 76-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  345. Published

    Fricton behavior of unfilled and filled thermoplastic polyurethane materials

    Godor, I., Grün, F. & Major, Z., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  346. Published

    Jahresbericht 2007 - CD Labor

    Eichlseder, W., Grün, F., Köberl, H., Stoschka, M., Winter, G. & Fröschl, J., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  347. Published

    Methodik zur in-situ Messung der Interaktionen zwischen Werkstoff, Schmierstoff und Beanspruchungskollektiv

    Grün, F., Godor, I. & Javidi, A., 2008, Symposium 2008 - Innovationen bei Werk- und Schmierstoffen für moderne, umweltorientierte Tribosysteme. p. 53-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  348. Published

    Schadensanalytische Untersuchungen von ausgewählten Schichten

    Grün, F., Godor, I. & Sailer, W., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  349. Published

    Tätigkeitsbericht CD-Labor

    Eichlseder, W., Fröschl, J., Grün, F., Stoschka, M., Leitgeb, A., Köberl, H. & Winter, G., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  350. Published

    Test Methods for the Characterisation of Different Designed Tribomaterials

    Grün, F., 2008, In: TriboTest. 14, p. 159-176

    Research output: Contribution to journal › Article › Research › peer-review

  351. Published

    Test methods to visualize the break-down behaviour of sliding bearing materials

    Grün, F., Godor, I., Eichlseder, W. & Gaertner, W., 2008, 2007 Proceedings of the ASME/STLE International Joint Tribology Conference, IJTC 2007. Vol. PART A. p. 413-414 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  352. Published

    Tribological and material properties of PTFE-Bz-Compounds - Do the correspond?

    Godor, I., Grün, F., Major, Z., Vezer, S. & Leitgeb, A., 2008, 13th Nordic Symposium on Tribology. p. 1-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  353. Published

    Tribologische Funktionsweise von metallischen Gleitwerkstoffen im Motorenbau

    Grün, F., Godor, I. & Eichlseder, W., 2008, Tagungsunterlagen - Forum für Metallurgie und Werkstofftechnik. p. 22-23

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  354. Published

    Tribologisches Verhalten eines Al-Basis Gleitschicht

    Grün, F. & Godor, I., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  355. Published

    Tribologisches Verhalten eines Al-Basis Gleitwerkstoffes

    Grün, F. & Godor, I., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  356. Published

    Tribologisches Verhalten eines Al-Basis Gleitwerkstoffes (2)

    Grün, F. & Godor, I., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  357. Published

    Tribologisches Verhalten eines Al-Basis Gleitwerkstoffes (3)

    Grün, F. & Godor, I., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  358. Published

    Tribologisches Verhalten eines Al-Basis Gleitwerkstoffes (4)

    Grün, F. & Godor, I., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  359. Published

    Tribologisches Verhalten eines Al-Basis Gleitwerkstoffes (5)

    Grün, F. & Godor, I., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  360. Published

    Tribologisches Verhalten eines Cu-Basis Gleitwerkstoffes

    Grün, F. & Godor, I., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  361. Published

    Tribologisches Verhalten eines Kunststoff-Basis Gleitschicht

    Grün, F. & Godor, I., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  362. Published

    Tribologisches Verhalten eines Sn-Basis Gleitwerkstoffes

    Grün, F. & Godor, I., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  363. Published

    Tribosystem journal bearing: what are the benefits of damage equivalent model tests?

    Grün, F., Godor, I. & Eichlseder, W., 2008, 2nd Fatigue Symposium Leoben. p. 468-487

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  364. Published

    Unterschied Modell- und Bauteilprüfung

    Grün, F. & Godor, I., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  365. Published

    Vergleichende Losreißversuche an einem tribologischem Ersatzmodell Block-on-Plate

    Grün, F., Godor, I. & Sailer, W., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  366. Published

    Vergleichende tribometrische Untersuchungen an Polymer-Beschichtungen

    Grün, F., Godor, I., Sailer, W. & Krampl, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  367. Published

    Vergleichende tribometrische Untersuchungen von Schichten

    Grün, F., Godor, I. & Sailer, W., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  368. Published

    Vergleichende tribometrische Untersuchungen von Schichten -Teil 2

    Godor, I., Sailer, W. & Grün, F., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  369. Published

    Vergleichende tribometrische Untersuchungen von Stählen

    Grün, F. & Godor, I., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  370. 2007
  371. Published

    Aluminium-base bearings – performance, limitations, new developments

    Mergen, R., Gumpoldsberger, G., Grün, F., Godor, I. & Langbein, F., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  372. Published

    CD-Laboratory: Evaluation Report 2007

    Eichlseder, W., Fröschl, J., Grün, F., Leitgeb, A., Stoschka, M. & Winter, G., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  373. Published

    Entwicklung von Prüfmethoden zur Charakterisierung von zweiphasigen Tribomaterialien

    Grün, F., 2007, 145 p.

    Research output: Thesis › Doctoral Thesis

  374. Published

    Grundlagenforschung von tribologischen System im Antriebsstrang hinsichtlich Reibung und Verschleiß

    Godor, I., Grün, F., Leitner, H. & Oberwinkler, C., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  375. Published

    Jahresbericht 09/2006 - 08/2007 des Forschungsprojektes P154

    Godor, I., Grün, F. & Fröschl, J., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  376. Published

    Neue Erkenntnisse des tribologischen Verhaltens dreier TPU-Dichtungswerkstoffe

    Godor, I., Grün, F. & Major, Z., 2007, Reliability Engineering - Simulation und Monitoring von verschleißgefährdeten Systemen. p. 63-73

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  377. Published

    Numerischer Vergleich des Kontaktverhaltens verschiedener Prüfverfahren

    Stoschka, M., Grün, F., Godor, I. & Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  378. Published

    Schadensorientierte Prüfmethoden und abgeleitete Funktionsmodelle für Gleitwerkstoffe

    Grün, F., Godor, I. & Eichlseder, W., 2007, In: Tribologie und Schmierungstechnik. 54, p. 26-30

    Research output: Contribution to journal › Article › Research › peer-review

  379. Published

    Test Methods for the Characterisation of Different Designed Tribomaterials

    Godor, I., Grün, F. & Eichlseder, W., 2007, Proceedings of the European Conference on Tribology ECOTRIB 2007. p. 1123-1134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  380. Published

    Tribologische Charakterisierung von Materialien

    Godor, I., Grün, F. & Stoschka, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  381. Published

    Tribowerkstoffe auf der Basis von Aluminium

    Grün, F., Godor, I. & Eichlseder, W., 2007, Reliability Engineering - Simulation und Monitoring von verschleißgefährdeten Systemen. p. 93-103

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  382. Published

    Vergleichende tribometrische Korrosionsuntersuchungen

    Grün, F. & Godor, I., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  383. Published

    Verschleißverhalten von Beschichtungen unter Hertzschen Kontaktbedingungen

    Grün, F. & Godor, I., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  384. 2006
  385. Published

    Calibrating Tribological Tests on the Basis of Simulation Models

    Grün, F., Godor, I., Vitek, T. & Eichlseder, W., 2006, Winter Workshop of Applied Mechanics. p. 8-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  386. Published

    Characterisation of Tribomaterials by Simulation and Tribological Tests

    Grün, F., Godor, I., Leitgeb, A., Köberl, H. & Eichlseder, W., 2006, Characterisation of Tribomaterials by Simulation and Tribological Tests. p. 73-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  387. Published

    Characterisation of Tribomaterials by Simulation and Tribological Tests

    Grün, F., Godor, I., Leitgeb, A., Köberl, H. & Eichlseder, W., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  388. Published

    Compound Material Friction Temperature Dependency-Development of Finite Element Model

    Vitek, T., Grün, F. & Leitgeb, A., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  389. Published

    Development of ABAQUS Model for Compound Material Friction Temperature Dependency Simulation

    Vitek, T., Grün, F., Leitgeb, A., Stoschka, M., Godor, I. & Eichlseder, W., 2006, Winter Workshop of Applied Mechanics. p. 46-51

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  390. Published

    Messdatenerfassung an einer Prüfmaschine mit LabVIEW Komplexe Datenerfassung an einem Tribometer (Reibprüfstand)

    Lang, A. & Grün, F., 2006, Virtuelle Instrumente in der Praxis. p. 52-58

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  391. Published

    Messdatenerfassung an einer Prüfmaschine mit LabVIEW - Komplexe Datenerfassung an einem Tribometer (Reibprüfstand) - Zeitbasierte oder drehwinkelgesteuerte Messung bis 3.000 U/min

    Lang, A. & Grün, F., 2006, Virtuelle Instrumente in der Praxis, Begleitband zum Kongress VIP 2006. p. 52-58

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  392. Published

    Schadensanalytik als Basis für tribometrische Untersuchungen am Beispiel eines Gleitlagers

    Grün, F., Godor, I. & Eichlseder, W., 2006, Reibung Schmierung und Verschleiß-Forschung und praktische Anwendung. p. 44/1-44/10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  393. Published

    Schadensorientierte Prüfmethodenentwicklung am Beispiel eines Gleitlagers

    Grün, F., Godor, I. & Eichlseder, W., 2006, 1. Leobener Betriebsfestigkeitstage. p. 45-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  394. Published

    Tribological Studies on Sliding Bearings on the Basis of Damage Analysis

    Grün, F., Godor, I. & Eichlseder, W., 2006, Advanced Problems in Mechanics (APM). p. 200-211

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  395. Published

    Tribological test engineering - Comparison of component tests of sliding bearings with tribological model tests

    Grün, F., Gódor, I. & Eichlseder, W., 2006, In: Transactions of FAMENA. 30, 1, p. 37-44 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  396. Published

    Tribological Test Engineering-Comparsion of Sliding Bearings with Tribological Model Tests

    Grün, F., Godor, I. & Eichlseder, W., 2006, In: Transactions of FAMENA. p. 37-44

    Research output: Contribution to journal › Article › Research › peer-review

  397. Published

    Tribologische Prüftechnik-Vergleich Bauteilprüfung von Gleitlagern mit Prüfung an einem tribologischem Ersatzmodell

    Grün, F., Godor, I. & Eichlseder, W., 2006, In: Österreichische Ingenieur- und Architekten-Zeitschrift : ÖIAZ. 151 Jg, p. 34-41

    Research output: Contribution to journal › Article › Research › peer-review

  398. Published

    Tribologisches Werkstoffverhalten von Thermoplastischen Polyurethan Dichtungswerkstoffen

    Godor, I., Major, Z. & Grün, F., 2006, Tribologisches Werkstoffverhalten von Thermoplastischen Polyurethan Dichtungswerkstoffen. p. 57-64

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  399. Published

    Tribometric Analysis of two tribo-materials with different contact geometries-critical reflection and simulation of the results

    Grün, F., Godor, I., Araujo, B. & Eichlseder, W., 2006, Analysis and Simulation of Contact Problems. p. 387-388

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  400. Published

    Vergleich der Funktionsweise von Tribomaterialien unterschiedlichen Aufbaus in Gleitanwendungen

    Grün, F., Godor, I., Eichlseder, W. & Gärtner, W., 2006, Vergleich der Funktionsweise von Tribomaterialien unterschiedlichen Aufbaus in Gleitanwendungen. p. 89-96

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  401. 2005
  402. Published

    Development of Tribological Test Methods

    Grün, F., Godor, I., Eichlseder, W., Köberl, H. & Lang, H., 2005, Development of Tribological Test Methods. p. 192-193

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  403. Published

    Entwicklung von tribologischen Prüfmethoden für geschmierte Bauteile

    Grün, F., Godor, I., Araujo, B. & Eichlseder, W., 2005, Entwicklung von tribologischen Prüfmethoden für geschmierte Bauteile. p. 101-108

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  404. Published

    Tribometric Analysis of two Tribo-Materials with different Contact Geometries-Critical Reflection and Simulation of the Results

    Grün, F., Godor, I., Araujo, B. & Eichlseder, W., 2005, Tribometric Analysis of two Tribo-Materials with different Contact Geometries-Critical Reflection and Simulation of the Results. p. 45-45

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  405. 2004
  406. Published

    Kritische Betrachtung von Tribometeranwendungen

    Grün, F., Godor, I., Stoschka, M. & Eichlseder, W., 2004, Symposium 2004. p. 67-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  407. Published

    Optimization of Casted Components Regarding Fatigue Strength

    Eichlseder, W., Grün, F. & Fröschl, J., 2004, Proceedings of the 44th Foundry Conference. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  408. Published

    Parameterfreie Gestaltoptimierung auf Basis einer Lebensdaueranalyse

    Meske, R., Lauber, B., Puchner, K. & Grün, F., 2004, In: Konstruktion. p. 82-85

    Research output: Contribution to journal › Article › Research › peer-review

  409. 2003
  410. Published

    Bauteilentwicklung auf Basis von Lebensdauergrößen

    Grün, F. & Eichlseder, W., 2003.

    Research output: Contribution to conference › Poster › Research › peer-review

  411. Published

    Computerunterstützte Auslegung von Gussbauteilen in Leichtbauweise

    Grün, F., Fröschl, J., Eichlseder, W. & Puchner, K., 2003, In: Gießerei-Rundschau. p. 154-158

    Research output: Contribution to journal › Article › Research › peer-review

  412. Published

    Effects of Shape on Fatigue Properties

    Grün, F. & Eichlseder, W., 2003, Proceedings of the 20th Danubia Adria Symposium on Experimental Methods in Solid Mechanics. p. 216-217

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  413. Published

    Effects of Shape on Fatigue Properties

    Grün, F. & Eichlseder, W., 2003.

    Research output: Contribution to conference › Poster › Research › peer-review

  414. Published

    Form- und Topologieoptimierung unter Berücksichtigung der Betriebsfestigkeit

    Grün, F., Eichlseder, W. & Puchner, K., 2003, Tagungsband zum XXII. Verformungskundlichen Kolloquium. p. 6-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  415. Published

    Shape- and Topology Optimization Regarding Fatigue Analysis

    Grün, F., Eichlseder, W. & Puchner, K., 2003, Cumulative Fatigue Damage Conference (CFD) 2003. p. 93-96

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

View graph of relations

Contact

Phone: 1450

Latest Research Output

View more (392)