Florian Grün

1 - 100 out of 392Page size: 100

Research output

  1. 2025
  2. Published

    Wasserstoff als nachhaltiger Energieträger – Dimensionieren im Maschinenbau

    Grun, F., Oberreiter, P. & Renhart, P., 4 Mar 2025, 20. Kraftfahrzeug – Symposium - Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Hydrodynamic performance testing of artificial textures using a novel pin-on-disc test method

    Pusterhofer, M., Maier, M., Scharf, R., Haumer, F. & Grün, F., 17 Feb 2025, In: Frontiers in Mechanical Engineering. 11.2025, 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Impact of tensile specimen properties on hydrogen embrittlement testing using hollow specimens

    Oberreiter, P., Winter, G., Grun, F. & Drexler, A., 12 Feb 2025.

    Research output: Contribution to conference › Presentation › Research › peer-review

  5. Published

    Fatigue Assessment of Precorroded AlSi9Cu3 Specimens Incorporating Short Crack Propagation

    Oberreiter, P., Schönowitz, M., Maier, B. & Grün, F., 9 Feb 2025, In: Fatigue and Fracture of Engineering Materials and Structures. ??? Stand: 27. März 2025, ??? Stand: 27. März 2025, 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. 2024
  7. Published

    Development of a novel aerosol-lubricated ring-on-liner test methodology

    Gussmagg, J., Pusterhofer, M., Breitegger, M. & Grün, F., 31 Dec 2024, In: Tribologia : Finnish Journal of Tribology. 41.2024, 3-4, p. 49-51 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Investigation of fracture mechanical properties of a brass alloy with microstructural variations

    Klaushofer, M., Stoschka, M., Maier, B. & Grün, F., 25 Nov 2024, In: Engineering Fracture Mechanics. 311.2024, 25 November, 22 p., 110564.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Neue Ansätze zur Berücksichtigung des Korrosionseinflusses auf die Schwingfestigkeit von Aluminium-Bauteilen

    Schönowitz, M., Oberreiter, P., Maier, B. & Grun, F., 9 Oct 2024.

    Research output: Contribution to conference › Presentation › Research › peer-review

  10. Published

    Fatigue Life Assessment of Corroded AlSi10MgMn Specimens

    Schönowitz, M., Fladischer, S., Oberreiter, P., Maier, B., Grün, F. & Bauer-Troßmann, K., 5 Oct 2024, In: Metals : open access journal . 14.2024, 10, 20 p., 1135.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    An Investigation into the Optimal Dimple Geometry in a Single-Dimple Sliding Contact

    Scharf, R., Pusterhofer, M., Gussmagg, J. & Grün, F., 5 Sept 2024, In: Machines : open access journal . 12.2024, 9, 16 p., 622.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    FATIGUE LIMIT ASSESSMENT OF INTERACTING SMALL DEFECTS BY CYCLIC R-CURVE ANALYSIS

    Fladischer, S., Stoschka, M. & Grun, F., 26 Aug 2024.

    Research output: Contribution to conference › Abstract › peer-review

  13. Published

    EHD simulation study on the influence of measured ICE compression piston ring profiles on the lubrication film formation

    Gussmagg, J., Maier, M., Pusterhofer, M. & Grün, F., 20 Jul 2024, In: Tribology International. 199.2024, November, 10 p., 110015.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Emergence of Coated Piston Ring Scuffing Behavior on an Application-Oriented Tribological Model Test System

    Markut, T., Summer, F., Pusterhofer, M. & Grün, F., 14 Jun 2024, In: Lubricants. 12.2024, 6, 25 p., 218.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Service Strength Assessment of Macroscopic Imperfections in Cast Steel Alloys

    Stoschka, M., Horvath, M., Mössler, W. & Grun, F., 13 Jun 2024.

    Research output: Contribution to conference › Paper › peer-review

  16. Published

    Influence of corrosion fatigue on the stress gradient effect of the aluminium alloy EN AW-6082 T6

    Schönowitz, M., Maier, B. & Grün, F., 9 Apr 2024, In: International Journal of Fatigue. 184.2024, July, 10 p., 108322.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    A Comprehensive Numerical Study of a Wedge-Shaped Textured Convergent Oil Film Gap

    Scharf, R., Maier, M., Pusterhofer, M. & Grün, F., 5 Apr 2024, In: Lubricants. 12.2024, 4, 20 p., 121.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Development of a novel aerosol-lubricated ring-on-liner test methodology

    Gussmagg, J., Pusterhofer, M. & Grun, F., 2024.

    Research output: Contribution to conference › Presentation › Research › peer-review

  19. Published

    Werkstoffkennwerte aus dem Tabellenbuch – Quo vadis?

    Grun, F., 2024, Kfz-Symposium 2024: Neue Technologien und Innovationen in der Fahrzeugtechnik XIX.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. 2023
  21. Published

    In-depth study of direct and derived acoustic emission parameters and their information content for classifying lubricated tribological sliding contacts

    Strablegg, C., Summer, F., Renhart, P., Pusterhofer, M. & Grün, F., Dec 2023, In: Tribology International. 2023, Vol.190*December, 17 p., 109028.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Fretting Wear of Thermoplastic Polyurethane (TPU): The Role of Environmental Conditions

    Tockner, M., Staudinger, P., Fasching, M., Schwarz, T., Summer, F., Grun, F. & Hausberger, A., 30 Sept 2023, Proceedings of 9th International Tribology Conference, ITC Fukuoka 2023.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    The Interaction of Two Amorphous Carbon Coatings (ta-C and a-C) on Polymer Substrates and the Consequences of the Tribological Contact Situation

    Stiller, T., Tervakangas, S., Manning, N., Jarry, O., Slapnik, J., Cerne, B., Grun, F. & Hausberger, A., 30 Sept 2023, Proceedings of 9th International Tribology Conference, ITC Fukuoka 2023.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    On the condition monitoring of rolling element bearings in rotating electrical machines

    Kraffczyk, F., Floh, F., Renhart, P. & Grun, F., 29 Sept 2023.

    Research output: Contribution to conference › Poster › Research

  25. Published

    Thermomechanische Ermüdung von warmfesten Stählen

    Winter, G. & Grun, F., 20 Sept 2023.

    Research output: Contribution to conference › Presentation › Research

  26. Published

    Low-Cycle Fatigue Behavior of Wire and Arc Additively Manufactured Ti-6Al-4V Material

    Springer, S., Leitner, M., Gruber, T., Oberwinkler, B., Lasnik, M. & Grün, F., 5 Sept 2023, In: Materials. 16.2023, 18, 21 p., 6083.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Impacts of nano-clay particles and heat-treating on out-of-phase thermo-mechanical fatigue characteristics in piston aluminum-silicon alloys

    Bahmanabadi, H., Azadi, M., Dadashi, A., Torkian, J., Parast, M. S. A., Winter, G. & Grün, F., 22 Jun 2023, In: Frattura ed Integrita Strutturale. 17.2023, 65, p. 224-245 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Influence of corrosion fatigue on the fatigue strength of an AlSi10MgMn high-pressure die-casting alloy with regard to the surface condition

    Schönowitz, M., Maier, B., Grün, F. & Bauer-Troßmann, K., 25 May 2023, In: Materials and Corrosion. 74.2023, 9, p. 1382-1389 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. E-pub ahead of print

    Experimental visualization of the wear and scuffing evolution of a flake graphite cast iron cylinder liner

    Gussmagg, J., Pusterhofer, M., Summer, F. & Grun, F., 3 May 2023, (E-pub ahead of print) In: Wear. 526-527.2023, 15 August, 12 p., 204948.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Multiscale Wear Simulation in Textured, Lubricated Contacts

    Maier, M., Pusterhofer, M. & Grün, F., 29 Mar 2023, In: Coatings. 13.2023, 4, 15 p., 697.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    On the Wear Behaviour of Bush Drive Chains: Part II—Performance Screening of Pin Materials and Lubricant Effects

    Summer, F., Bergmann, P. & Grün, F., 25 Mar 2023, In: Lubricants. 11.2023, 4, 24 p., 157.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Chaboche viscoplastic material model for process simulation of additively manufactured Ti-6Al-4 V parts

    Springer, S., Seisenbacher, B., Leitner, M., Grün, F., Gruber, T., Lasnik, M. & Oberwinkler, B., 11 Mar 2023, In: Welding in the world. 67.2023, April, p. 997-1007 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. E-pub ahead of print

    Wear simulation in lubricated contacts considering wear-dependent surface topography changes

    Maier, M., Pusterhofer, M. & Grün, F., 18 Feb 2023, (E-pub ahead of print) In: Materials Today: Proceedings. 93.2023, 4, p. 563-570 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    On the Wear Behavior of Bush Drive Chains: Part I—Characterization of Engine Damage Processes and Development of a Model Test Setup for Pin Wear

    Summer, F., Bergmann, P. & Grün, F., 16 Feb 2023, In: Lubricants. 11.2023, 2, 20 p., 85.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Prediction of Friction Power via Machine Learning of Acoustic Emissions from a Ring-on-Disc Rotary Tribometer

    Strablegg, C., Summer, F., Renhart, P. & Grün, F., 19 Jan 2023, In: Lubricants. 11.2023, 2, 17 p., 37.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Additive Fertigung - Designkriterien und Anwendungen

    Grun, F. & Tittler, M., 2023, Kfz-Symposium 2023: Neue Technologien und Innovationen in der Fahrzeugtechnik XVIII.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. 2022
  38. Published

    Influence of T6 heat-treating and over-ageing on out-of-phase thermo-mechanical fatigue behaviors of Al-Si-Cu alloy

    Khisheh, S., Azadi, M., Hendoabadi, V. Z., Parast, M. S. A., Winter, G., Seisenbacher, B., Grün, F. & Khalili, K., Dec 2022, In: Materials Today Communications. 33.2022, December, 12 p., 104803.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Modelling Approaches of Wear-Based Surface Development and Their Experimental Validation

    Maier, M., Pusterhofer, M. & Grün, F., 26 Nov 2022, In: Lubricants. 10.2022, 12, 21 p., 335.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Very high cycle fatigue assessment at elevated temperature of 100 µm thin structures made of high-strength steel X5CrNiCuNb16-4

    Himmelbauer, F., Winter, G., Seisenbacher, B., Grün, F. & Kiesling, C., 12 Oct 2022, In: Journal of Materials Research and Technology. 21.2022, November-December, p. 1811-1829 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Wear simulation in lubricated contacts considering wear-dependent surface topography changes

    Maier, M., Pusterhofer, M. & Grün, F., 21 Sept 2022.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    On the Transferability of Fatigue and Cyclic Deformation Data to 100 µm Thin Structures

    Himmelbauer, F., Winter, G., Grün, F. & Kiesling, C., 15 Sept 2022, In: Metals. 12.2022, 9, 22 p., 1524.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Tribological characterization of coatings for their suitability as protective coatings for rollers using two-disc model investigations

    Grün, F. & Gódor, I., 14 Jul 2022, 7th World Tribology Congress, WTC2022, Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Influence of viscoelasticity on fatigue behaviour of short fibre reinforced polymers depending on mean stress and fibre orientation

    Stadler, G., Primetzhofer, A., Pinter, G. G. & Grün, F., 26 Jun 2022.

    Research output: Contribution to conference › Presentation › Research

  45. Published

    Optimization of disc geometry and hardness distribution for better transferability of fatigue life prediction from disc to FZG tests

    Trausmuth, A., Stoschka, M. & Grün, F., 15 Jun 2022, In: Wear. 498-499.2022, 15 June, 13 p., 204329.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Fatigue Assessment of Wire and Arc Additively Manufactured Ti-6Al-4V

    Springer, S., Leitner, M., Gruber, T., Oberwinkler, B., Lasnik, M. & Grün, F., 4 May 2022, In: Metals. 12.2022, 5, 17 p., 795.

    Research output: Contribution to journal › Article › Research › peer-review

  47. E-pub ahead of print

    Methodology, validation & signal processing of acoustic emissions for selected lubricated tribological contacts

    Strablegg, C., Renhart, P., Summer, F. & Grün, F., 2 May 2022, (E-pub ahead of print) In: Materials Today: Proceedings. 2022, 5, p. 2604-2610 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    VHCF properties and assessment of specimens and thin-walled component-like structures made of high-strength steel X5CrNiCuNb16-4

    Himmelbauer, F., Winter, G., Grün, F. & Kiesling, C., 19 Feb 2022, In: International Journal of Fatigue. 156.2022, March, 10 p., 106645.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Cyclic hardening/softening experimental data in nano-clay-composite and aluminum alloy under high-temperature strain-controlled loading

    Azadi, M., Bahmanabadi, H., Grün, F., Winter, G. & Seisenbacher, B., 9 Feb 2022, In: Experimental Results. 3.2022, e6, 32 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Evaluation and consideration of local specimen material properties in lifetime prediction of short fiber-reinforced PA6T/6I

    Stadler, G., Primetzhofer, A., Pinter, G. & Grün, F., 1 Feb 2022, In: Fatigue and Fracture of Engineering Materials and Structures. 45.2022, 4, p. 980-990 11 p., 13634.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Artificial intelligence assisted fatigue failure prediction

    Schneller, W., Leitner, M., Maier, B., Grün, F., Jantschner, O., Leuders, S. & Pfeifer, T., Feb 2022, In: International Journal of Fatigue. 155.2022, February, 7 p., 106580.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Validation of statistic and deterministic asperity contact models using experimental Stribeck data

    Maier, M., Pusterhofer, M., Summer, F. & Grün, F., Jan 2022, In: Tribology International. 165.2022, January, 11 p., 107329.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Fatigue life assessment and modelling of the cyclic material behaviour of a high-strength martensitic steel

    Himmelbauer, F., Seisenbacher, B., Winter, G., Grün, F. & Kiesling, C., 2022, LCF9 Ninth International Conference on Low Cycle Fatigue.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Implementation of a viscoplastic substrate creep model in the thermomechanical simulation of the WAAM process

    Springer, S., Röcklinger, A., Leitner, M., Grün, F., Gruber, T., Lasnik, M. & Oberwinkler, B., 2022, In: Welding in the world.

    Research output: Contribution to journal › Article › Research › peer-review

  55. 2021
  56. Published

    Novel S-N curve for different hardened layers in point and line contact

    Trausmuth, A. & Grün, F., Dec 2021, In: International Journal of Fatigue. 153.2021, December, 16 p., 106439.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Monitoring Tribological Events by Acoustic Emission Measurements for Bearing Contacts

    Renhart, P., Maier, M., Strablegg, C., Summer, F., Grün, F. & Eder, A., 10 Nov 2021, In: Lubricants. 9.2021, 11, 14 p., 109.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    The tribological performance of silver in aircraft turbine load cases

    Renhart, P., Summer, F., Grün, F., Posch, C. & Eder, A., Nov 2021, In: Tribology International. 163.2021, November, 15 p., 107184.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Improving the Tribological Properties of Technical Polymers with Metal Sulphide Compounds

    Hausberger, A., Stiller, T., Kappl, C., Hensgen, L. & Grün, F., 13 Sept 2021, In: Lubricants. 9.2021, 9, 13 p., 91.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Effect of nano-clay addition and heat treatment on tensile and stress-controlled low-cycle fatigue behaviors of aluminum-silicon alloy

    Azadi, M., Dadashi, A., Winter, G., Seisenbacher, B. & Grün, F., Jul 2021, In: Frattura ed Integrità Strutturale . 15.2021, 57, p. 373-397 25 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Effect of Surface Layer on the Fatigue Strength of Selectively Laser Melted 17-4 PH Steel

    Leitner, M., Schneller, W., Springer, S. & Grün, F., Jul 2021, In: Journal of Materials Engineering and Performance. 30, 7, p. 5383-5391 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    A novel high-frequency fatigue testing methodology for small thin-walled structures in the HCF/VHCF regime

    Himmelbauer, F., Tillmanns, M., Winter, G., Grün, F. & Kiesling, C., May 2021, In: International Journal of Fatigue. 146, 146, 10 p., 106146.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Phenomenological wear model of case-hardened 20MnCr5 under cyclic line rolling contact

    Trausmuth, A., Godor, I. & Grün, F., 15 Apr 2021, In: Wear. 470, 15 April, 16 p., 203607.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Fatigue strength assessment of additively manufactured metallic structures considering bulk and surface layer characteristics

    Schneller, W., Leitner, M., Pomberger, S., Grün, F., Leuders, S., Pfeifer, T. & Jantschner, O., Apr 2021, In: Additive Manufacturing. 40.2021, April, 12 p., 101930.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Model Calibration and Data Set Determination Considering the Local Micro-Structure for Short Fiber Reinforced Polymers

    Primetzhofer, A., Stadler, G., Pinter, G. & Grün, F., 27 Jan 2021, In: Journal of composites science. 5.2021, 2, 11 p., 40.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    On an experimental-computational approach for localised durability assessment of sliding contacts

    Pusterhofer, M. & Grün, F., 2021, In: Wear. 486-487.2021, 15 December, 18 p., 204068.

    Research output: Contribution to journal › Article › Research › peer-review

  67. 2020
  68. Published

    Investigation of the influence of viscoelastic behaviour on the lifetime of short fibre reinforced polymers

    Stadler, G., Primetzhofer, A., Jerabek, M., Pinter, G. & Grün, F., Dec 2020, In: Polymers. 12, 12, p. 1-13 13 p., 2874.

    Research output: Contribution to journal › Article › Research › peer-review

  69. E-pub ahead of print

    Fatigue strength estimation methodology of additively manufactured metallic bulk material

    Schneller, W., Leitner, M., Leuders, S., Sprauel, J. M., Grün, F., Pfeifer, T. & Jantschner, O., 4 Nov 2020, (E-pub ahead of print) In: Additive Manufacturing. 39.2021, March, 13 p., 101688.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Precise Correlation of Contact Area and Forces in the Unstable Friction between a Rough Fluoroelastomer Surface and Borosilicate Glass

    Wang, C., Bonyadi, S. Z., Grün, F., Pinter, G., Hausberger, A. & Dunn, A. C., 16 Oct 2020, In: Materials. 13.2020, 20, p. 1-16 16 p., 4615.

    Research output: Contribution to journal › Article › Research › peer-review

  71. E-pub ahead of print

    Investigation and simulation of the age-dependent behaviour of an aluminium alloy under thermomechanical loading

    Seisenbacher, B., Winter, G. & Grün, F., 15 Oct 2020, (E-pub ahead of print) In: Mechanics of materials. 151.2020, December, 11 p., 103612.

    Research output: Contribution to journal › Article › Research › peer-review

  72. E-pub ahead of print

    Cumulative damage assessment of tribological durability limits

    Pusterhofer, M., Summer, F., Gódor, I. & Grün, F., 6 Jul 2020, (E-pub ahead of print) In: Wear. 456-457.2020, 15 September, 15 p., 203318.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Evaluation of tensile and low-cycle fatigue properties at elevated temperatures in piston aluminum-silicon alloys with and without nano-clay-particles and heat treatment

    Azadi, M., Bahmanabadi, H., Grün, F. & Winter, G., 11 May 2020, In: Materials Science and Engineering A. 788.2020, 24 June, 16 p., 139497.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Modelling the effect of ageing on the yield strength of an aluminium alloy under cyclic loading at different ageing temperatures and test temperatures

    Seisenbacher, B., Winter, G. & Grün, F., 13 Apr 2020, In: International Journal of Fatigue. 137.2021, August, 9 p., 105635.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg

    Schneller, W., Leitner, M., Springer, S., Grün, F. & Taschauer, M., 1 Apr 2020, Selective Laser Melting: Materials and Applications. p. 4-12

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  76. Published

    Influence of specimen diameter size on the deformation behaviour and short-term strength range of an aluminum alloy

    Seisenbacher, B., Klösch, R., Winter, G. & Grün, F., Apr 2020, In: MP materials testing : Materialprüfung . 62.2020, 4, p. 345-350 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Tribologie im Maschinenbau: In Mobilität und anderen Bereichen

    Grün, F., 2 Mar 2020, Neue Technologien und Innovationen in der Fahrzeugtechnik XVII.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Investigation of fibre orientation and notch support of short glass fibre lot reinforced thermoplastics

    Stadler, G., Primetzhofer, A., Pinter, G. & Grün, F., 1 Feb 2020, In: International Journal of Fatigue. 131.2020, February, 8 p., 105284.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Tribological investigations with near eutectic AlSi alloys found in engine vane pumps – Characterization of the material tribo-functionalities

    Summer, F., Pusterhofer, M., Grün, F. & Gódor, I., 1 Feb 2020, In: Tribology International. 146.2020, June, 13 p., 106236.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Assessment of Shaft Surface Structures on the Tribological Behavior of Journal Bearings by Physical and Virtual Simulation

    Pusterhofer, M., Summer, F., Maier, M. & Grün, F., 15 Jan 2020, In: Lubricants. 8.2020, 1, 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Close-to-Application Test Methodology Validated by a Baseline Study for Novel Bearing Developments in Aircraft Turbines

    Renhart, P., Summer, F., Grün, F. & Eder, A., 1 Jan 2020, In: Lubricants. 8, 1, p. 1-14 14 p., 7.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Friction and Wear Performance of Various Polymer Coatings for Journal Bearings under Stop Start Sliding

    Summer, F., Grün, F. & Ravenhill, E. R., 1 Jan 2020, In: Lubricants. 8.2020, 1, 14 p., 1.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Material behaviour of a dual hardening steel under thermomechanical loading

    Seisenbacher, B., Hofinger, M., Winter, G. & Grün, F., Jan 2020, In: Fatigue & fracture of engineering materials & structures : Fatigue and fracture of engineering materials and structures. 43.2020, 1, p. 191-200 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Effect of surface layer on the fatigue strength of additively manufactured 17-4 PH steel

    Leitner, M., Schneller, W., Springer, S. & Grün, F., 2020.

    Research output: Contribution to conference › Paper

  85. Published

    Numerical Fatigue Analysis of Induction-Hardened and Mechanically Post-Treated Steel Components

    Leitner, M., Aigner, R. & Grün, F., 2020, Advances in CAD/CAM/CAE Technologies. Multidisciplinary Digital Publishing Institute (MDPI)

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  86. 2019
  87. Published

    Development of a Model Test System for a Piston Ring/Cylinder Liner-Contact with Focus on Near-to-Application Seizure Behaviour

    Pusterhofer, M., Summer, F., Wuketich, D. & Grün, F., 22 Nov 2019, In: Lubricants. 7.2019, 12, p. 104-115 12 p., 104.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Influencing factors on the fatigue strength of selectively laser melted structures

    Schneller, W., Leitner, M., Springer, S., Beter, F. & Grün, F., 20 Nov 2019.

    Research output: Contribution to conference › Poster › Research

  89. Published

    Effect of Post Treatment on the Microstructure, Surface Roughness and Residual Stress Regarding the Fatigue Strength of Selectively Laser Melted AlSi10Mg Structures

    Schneller, W., Leitner, M., Pomberger, S., Springer, S., Beter, F. & Grün, F., 16 Oct 2019, In: Journal of Manufacturing and Materials Processing. 3.2019, 4, 21 p., 89.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Influence of surface roughness on additively manufactured aluminum components

    Springer, S., Schneller, W., Leitner, M. & Grün, F., 26 Sept 2019.

    Research output: Contribution to conference › Poster › Research

  91. Published

    Influence of surface roughness on additively manufactured aluminum components

    Springer, S., Schneller, W., Leitner, M. & Grün, F., 24 Sept 2019, 36th Danubia Adria Symposium on Advances in Experimental Mechanics: Extended Abstracts. Plzen, Czech Republic, p. 105-106

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. Published

    Fretting behavior of thermoplastic polyurethanes

    Wang, C., Hausberger, A., Berer, M., Pinter, G., Grün, F. & Schwarz, T., 23 Aug 2019, In: Lubricants. 7.2019, 9, 24 p., 73.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Correlation of Tribological Behavior and Fatigue Properties of Filled and Unfilled TPUs

    Wang, C., Stiller, T., Hausberger, A., Pinter, G., Grün, F. & Schwarz, T., 20 Jul 2019, In: Lubricants. 7.2019, p. 1-18 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Damage models of different hardness layers subjected to point contact

    Trausmuth, A., Godor, I. & Grün, F., 15 Jul 2019, In: Wear. 430-431.2019, July, p. 157-168 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    A baseline study for developing novel coatings for high performance journal bearings in aircraft-turbines

    Renhart, P., Summer, F. & Grün, F., 13 Jun 2019, ECOTRIB 2019. Österreichische Tribologische Gesellschaft, p. 70 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Development of a model test system for a piston ring/cylinder liner-contact with focus on near-to-application seizure behaviour

    Pusterhofer, M., Wuketich, D., Summer, F. & Grün, F., 13 Jun 2019, ECOTRIB 2019. Österreichische Tribologische Gesellschaft, p. 1 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Challenges of friction reduction of engine plain bearings – Tackling the problem with novel bearing materials

    Summer, F., Grün, F., Offenbecher, M. & Taylor, S., 1 Mar 2019, In: Tribology International. 131.2019, March, p. 238-250 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Lifetime assessment of anisotropic materials by the example short fibre reinforced plastic

    Primetzhofer, A., Stadler, G., Pinter, G. & Grün, F., 1 Mar 2019, In: International Journal of Fatigue. 120.2019, March, p. 294-302 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg

    Schneller, W., Leitner, M., Springer, S., Grün, F. & Taschauer, M., 1 Feb 2019, In: Journal of Manufacturing and Materials Processing. 3.2019, 1, 9 p., 16.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg

    Schneller, W., Leitner, M., Springer, S., Grün, F. & Taschauer, M., 1 Feb 2019, In: Journal of Manufacturing and Materials Processing. 3.2019, 1, 9 p., 16.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Data set determination for lifetime assessment of short fibre reinforced polymers

    Primetzhofer, A., Stadler, G., Pinter, G. G. & Grun, F., 1 Jan 2019, In: Zeitschrift Kunststofftechnik : Journal of plastics technology. 15.2019, 1, 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Datensatzermittlung zur lebensdauervorhersage kurzfaserverstärkter kunststoffe

    Primetzhofer, A., Stadler, G., Grün, F. & Pinter, G., 1 Jan 2019, In: Zeitschrift Kunststofftechnik/Journal of Plastics Technology. 15.2019, 1, 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Study of notch effect and fibre orientation on fatigue strength of short glass fibre reinforced polyamide

    Stadler, G., Primetzhofer, A., Pinter, G. & Grün, F., 1 Jan 2019, ECCM 2018 - 18th European Conference on Composite Materials. (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  104. Published

    Auslegung thermomechanisch gefertigter Strukturen

    Grün, F. & Leitner, M., 2019, Proceedings zu Neue Technologien und Innvoationen in der Fahrzeugtechnik XVI. Steyr, p. 1 30 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  105. Published

    Consideration of ageing effects during the TMF test on the stress-strain behaviour of an aluminium alloy

    Seisenbacher, B., Winter, G. (Co-editor) & Grün, F. (Co-editor), 2019.

    Research output: Contribution to conference › Abstract

  106. Published

    Effect of surface condition on the fatigue strength of selectively laser melted metallic structures

    Leitner, M., Schneller, W., Springer, S., Beter, F. & Grün, F., 2019, 72nd IIW Annual Assembly and International Conference: IIW Document XIII-WG4-171-19.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  107. Published

    Fatigue strength of welded joints and additively manufactured structures

    Grün, F. & Leitner, M., 2019, Proceedings International FEMFAT User Meeting 2019: Fatigue Analysis of Joint Connections.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 Next
View graph of relations

Contact

Phone: 1450

Latest Research Output

View more (392)