Ewald Fauster

1 - 129 out of 129Page size: 500

Research output

  1. 2025
  2. Published

    The Fossil, the Green, and the In-Between: Life Cycle Assessment of Manufacturing Composites with Varying Bio-Based Content

    Kirschnick, U., Ravindran, B., Sieberer, M., Fauster, E. & Feuchter, M., 20 Feb 2025, In: Journal of composites science. 9.2025, 3, 18 p., 93.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2024
  4. Published

    A new ISO standard for the experimental characterization of in-plane permeability of fibrous reinforcements

    May, D., Advani, S. G., Duhovic, M., Endruweit, A., Fauster, E., George, A., Liotier, P. J., Lira, C., Lomov, S. V., Pucci, M. F., Schmeer, S., Abliz, D., Berg, D. C., Binetruy, C., Bodaghi, M., Comas-Cardona, S., Etchells, M., Govignon, Q., Koorevaar, A. & Michaud, V. & 9 others, Park, C. H., Schubnel, R., Sousa, P., Ravel, R., Rouhi, M., Syerko, E., Umer, R., Vollmer, M. & Yong, A., 20 Nov 2024, In: Composites Part A: Applied Science and Manufacturing. 190.2025, March, 13 p., 108592.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Characterisation of the Mechanical Properties of Natural Fibre Polypropylene Composites Manufactured with Automated Tape Placement

    Legenstein, A., Haiden, L., Feuchter, M. & Fauster, E., 1 Oct 2024, In: Journal of composites science. 8.2024, 10, 21 p., 396.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Manufacturing bio-based fiber-reinforced polymer composites: Process performance in RTM and VARI processes

    Kirschnick, U., Feuchter, M., Ravindran, B., Salzmann, M., Duretek, I., Fauster, E. & Schledjewski, R., 19 Jul 2024, In: Advanced Manufacturing: Polymer and Composites Science. 10.2024, 1, 12 p., 2379205.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    INFLUENCE OF FLUID PROPERTIES ON TRANSVERSE FABRIC COMPRESSIBILITY DURING IN-SITU IMPREGNATION

    Bender, M. & Fauster, E., 5 Jul 2024, Proceedings of the 21st European Conference on Composite Materials: Volume 3 - Material and Structural Behavior – Simulation & Testing. 1 ed. Nantes, Vol. 3. p. 1140 - 1147 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Near-infrared spectroscopy in resin transfer molding—determination of the degree of cure

    Salzmann, M., Märzinger, W., Teuchtmann, M., Ravindran, B., Kirschnick, U. & Fauster, E., Jun 2024, In: International Journal of Advanced Manufacturing Technology. 132.2024, 11-12, p. 5557-5565 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Effect of Flashlamp Heating System Parameters on the Wedge Peel Strength of Thermoplastic Carbon Fiber Tape in the Automated Tape Placement Process

    Legenstein, A. & Fauster, E., 29 Apr 2024, In: Journal of Manufacturing and Materials Processing. 8.2024, 3, 17 p., 91.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Impact Characteristics and Repair Approaches of Distinct Bio-Based Matrix Composites: A Comparative Analysis

    Ravindran, B., Agathocleous, T., Oswald-Tranta, B., Fauster, E. & Feuchter, M., 29 Mar 2024, In: Journal of composites science. 8.2024, 4, 20 p., 126.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Circular Economy Potential of Sustainable Bio-Based Composites: Repair, Recycle and Reuse

    Ravindran, B. & Fauster, E., 2024.

    Research output: Contribution to conference › Poster › Research

  12. Published

    INLINE PROCESS MONITORING AND FAILURE MANAGEMENT CONCEPT FOR ATL

    Yadav, N., Schledjewski, R. & Fauster, E., 2024, Proceedings of the 21st European Conference on Composite Materials: Volume 5 - Manufacturing. p. 497-502 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. 2023
  14. E-pub ahead of print

    Experimental validation of a new adaptable LCM mold filling software

    Obertscheider, C., Fauster, E. & Stieber, S., 12 Dec 2023, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 9.2023, 1, 19 p., 2282310.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Novel test-rig for compaction behaviour analysis of textile reinforcements for improved RTM-process replication

    Bender, M. & Fauster, E., 1 Nov 2023, In: Advanced Manufacturing: Polymer and Composites Science. 9.2023, 1, 5 p., 2263828.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Inferring material properties from FRP processes via sim-to-real learning

    Stieber, S., Schröter, N., Fauster, E., Bender, M., Schiendorfer, A. & Reif, W., 27 Jul 2023, In: International Journal of Advanced Manufacturing Technology. 128.2023, September, p. 1517–1533 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Resin avatar for Industry 4.0

    Lira, C., Etchells, M., Wolfahrt, M., Fauster, E., Daforno, R. & Koorevaar, A., May 2023.

    Research output: Contribution to conference › Abstract › peer-review

  18. Published

    Resin avatar for Industry 4.0

    Lira, C., Etchells, M., Wolfahrt, M., Fauster, E., Daforno, R. & Koorevaar, A., May 2023.

    Research output: Contribution to conference › Presentation › Research

  19. Published

    RTMsim - A Julia module for filling simulations in Resin Transfer Moulding with the Finite Area Method

    Obertscheider, C. & Fauster, E., 15 Apr 2023, In: The journal of open source software. 8.2023, 8 p., 4763.

    Research output: Contribution to journal › Article › Research › peer-review

  20. 2022
  21. Published

    Gel Point Determination in Resin Transfer Molding Process with Fiber Bragg Grating Inscribed in Side-Hole Elliptical Core Optical Fiber

    Wachtarczyk, K., Bender, M., Fauster, E., Schledjewski, R., Gąsior, P. & Kaleta, J., 19 Sept 2022, In: Materials. 15.2022, 18, 14 p., 6497.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Compressibility and Relaxation Characteristics of Bindered Non-Crimp-Fabrics Under Temperature and Injection Fluid Influence

    Bender, M. & Fauster, E., 29 Aug 2022, Proceedings of the Munich Symposium on Lightweight Design 2021: Tagungsband zum Münchner Leichtbauseminar 2021. 1 ed. Heidelberg: Springer Vieweg, p. 44-58 14 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    DETERMINATION OF A RACETRACKING PASS-FAIL CRITERION FOR EDGE FLOW PERMEABILITY MEASUREMENT

    George, A., Huntsman, M., Koorevaar, A., Fauster, E. & May, D., 2022, Characterization. Vassilopoulos, A. P. & Michaud, V. (eds.). p. 733-740 8 p. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    EXPERIMENTAL CHARACTERIZATION OF TRANSVERSE FABRIC COMPRESSIBILITY BY MEANS OF IN-SITU-IMPREGNATION

    Bender, M. & Fauster, E., 2022.

    Research output: Contribution to conference › Paper

  25. 2021
  26. Published

    Instrumentation of an Inspection Test Rig for Geometry Measurement of Fiber Bundles in Automated Composite Manufacturing

    Neunkirchen, S., Fauster, E., Lehner, S. & O'Leary, P., 13 Dec 2021, In: IEEE transactions on instrumentation and measurement. 71

    Research output: Contribution to journal › Special issue › Research › peer-review

  27. Published

    Methodenentwicklung zur kohärenten Charakterisierung bebinderter Verstärkungstextilen bei erhöhter Temperatur

    Bender, M. & Fauster, E., 15 Sept 2021.

    Research output: Contribution to conference › Poster › Research

  28. Published

    Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise

    Yong, A., Aktas, A., May, D., Endruweit, A., Advani, S. G., Hubert, P., Abaimov, S. G., Abliz, D., Akhatov, I., Ali, M. A., Allen, T., Berg, D. C., Bickerton, S., Brauner, C., Brütsch, D., Caglar, B., Causse, P., Chiminelli, A., Cohades, A. & Comas-Cardona, S. & 32 others, Danzi, M., Dittmann, J., Dransfeld, C., Ermanni, P., Fauster, E., Garcia-Manrique, J. A., Grishaev, V., Guilloux, A., Hancioglu, M., Harazi, W., Herman, T., Huang, W., Kabachi, M. A., Keller, A., Kind, K., Laspalas, M., Lebedev, O. V., Lizaranzu, M., Long, A., Masania, K., Michaud, V., Middendorf, P., Salvatori, D., Schubnel, R., Sharp, N., Sozer, E. M., Thomas, J., Trochu, F., Umer, R., Valette, J., Wang, J. H. & Willenbacher, B., Sept 2021, In: Composites Part A: Applied Science and Manufacturing. 148.2021, September, 16 p., 106480.

    Research output: Contribution to journal › Article › Research › peer-review

  29. E-pub ahead of print

    Equation for modelling energy transfers in multi-phase flows through porous media, optimised for liquid composite moulding processes

    Sebastian, R. G., Obertscheider, C., Fauster, E. & Schledjewski, R., 20 Aug 2021, (E-pub ahead of print) In: International journal of heat and mass transfer. 181.2021, December, 8 p., 121856.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Instrumentation of a Roving Inspection Test Rig with Surface Geometry Measurement of Fiber Bundles

    Lehner, S., Neunkirchen, S., Fauster, E. & O'Leary, P., 17 May 2021, I2MTC 2021 - IEEE International Instrumentation and Measurement Technology Conference, Proceedings. IEEE Xplore (online): Institute of Electrical and Electronics Engineers, 9459889. (Conference Record - IEEE Instrumentation and Measurement Technology Conference; vol. 2021-May).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    ACTIVE RTM PROCESS MANAGEMENT BASED ON PHENOMENOLOGICAL MODELS

    Fauster, E., Hergan, P. & Schledjewski, R., 2021.

    Research output: Contribution to conference › Paper › peer-review

  32. Published

    PermeabilityNets: Comparing Neural Network Architectures on a Sequence-to-Instance Task in CFRP Manufacturing

    Stieber, S., Schroter, N., Fauster, E., Schiendorfer, A. & Reif, W., 2021, Proceedings - 20th IEEE International Conference on Machine Learning and Applications, ICMLA 2021. Wani, M. A., Sethi, I. K., Shi, W., Qu, G., Raicu, D. S. & Jin, R. (eds.). Institute of Electrical and Electronics Engineers, p. 694-697 4 p. (Proceedings - 20th IEEE International Conference on Machine Learning and Applications, ICMLA 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Processing of Fibre-Reinforced Polymer Composites Based on Phenomenological Models

    Fauster, E., Hergan, P. & Schledjewski, R., 2021, Polymer Meeting 14: Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. 2020
  35. Published

    Experimental characterisation of textile compaction response: a benchmark exercise

    Young, A., Aktas, A., May, D., Endruweit, A., Lomov, S. V., Advani, S. G., Hubert, P., Abaimov, S. G., Abliz, D., Akhatov, I., Ali, M. A., Allaoui, S., Allen, T., Berg, D. C., Bickerton, S., Caglar, B., Causse, P., Chiminelli, A., Comas-Cardona, S. & Danzi, M. & 30 others, Dittmann, J., Dransfeld, C., Ermanni, P., Fauster, E., George, A., Gillibert, J., Govignon, Q., Graupner, R., Grishaev, V., Guilloux, A., Kabachi, M. A., Keller, A., Kind, K., Large, D., Laspalas, M., Lebedev, O. V. L., Lizaranzu, M., Long, A. C., López, C., Masania, K., Michaud, V., Middendorf, P., Mitschang, P., van Oosterom, S., Schubnel, R., Sharp, N., Sousa, P., Trochu, F., Umer, R. & Wang, J. H., Dec 2020, In: Composites Part A: Applied Science and Manufacturing.

    Research output: Contribution to journal › Article › Research › peer-review

  36. E-pub ahead of print

    Flow-speed-controlled quality optimisation for one-shot-hybrid RTM parts

    Hergan, P., Fauster, E., Perkonigg, D., Pinter, G. & Schledjewski, R., 11 Feb 2020, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 6.2020, 1, p. 29-37 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Elliptic paraboloid flow front modelling for in-plane permeability characterization of textile fabrics by the radial flow technique

    Fauster, E., Berg, D. C., May, D., Endruweit, A., Blößl, Y. & Schledjewski, R., 2020, ECCM 2018 - 18th European Conference on Composite Materials. (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. 2019
  39. E-pub ahead of print

    A reference specimen for compaction tests of fiber reinforcements

    May, D., Kühn, F., Etchells, M., Fauster, E., Endruweit, A. & Lira, C., 13 Dec 2019, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 5.2019, 4, p. 230-233 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Influence of test fluids on the permeability of epoxy powder bindered non-crimp fabrics

    Tonejc, M., Ebner, C., Fauster, E. & Schledjewski, R., 1 Aug 2019, In: Advanced Manufacturing: Polymer and Composites Science. 5.2019, 3, p. 128-139 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Investigation on the Influence of Pressure Terms in a Volume-Averaged Energy Balance in the Modelling of Liquid Composite Moulding Processes

    Sebastian, R. G., Obertscheider, C., Fauster, E. & Schledjewski, R., 27 Jun 2019, Key Engineering Materials. Hausmann, J. (ed.). Vol. 809. p. 480-486 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    In-plane permeability characterization of engineering textiles based on radial flow experiments: A benchmark exercise

    May, D., Aktas, A., Advani, S. G., Berg, D. C., Endruweit, A., Fauster, E., Lomov, S. V., Long, A., Mitschang, P., Abaimov, S., Abliz, D., Akhatov, I., Ali, M. A., Allen, T. D., Bickerton, S., Bodaghi, M., Caglar, B., Caglar, H., Chiminelli, A. & Correia, N. & 35 others, Cosson, B., Danzi, M., Dittmann, J., Ermanni, P., Francucci, G., George, A., Grishaev, V., Hancioglu, M., Kabachi, M. A., Kind, K., Deléglise-Lagardère, M., Laspalas, M., Lebedev, O. V., Lizaranzu, M., Liotier, P. J., Middendorf, P., Morán, J., Park, C. H., Pipes, R. B., Pucci, M. F., Raynal, J., Rodriguez, E. S., Schledjewski, R., Schubnel, R., Sharp, N., Sims, G., Sozer, E. M., Sousa, P., Thomas, J., Umer, R., Wijaya, W., Willenbacher, B., Yong, A., Zaremba, S. & Ziegmann, G., 1 Jun 2019, In: Composites Part A: Applied Science and Manufacturing. 121.2019, June, p. 100-114 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    LIQUID COMPOSITE MOLDING – A BROAD RANGE OF PROCESSING TECHNIQUES BEING VERSATILE AND CHALLENGING

    Schledjewski, R., Hergan, P. & Fauster, E., 15 May 2019, Proceedings of Polymer Composites 2019.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Custom OpenFOAM solver for modelling Liquid Composite Moulding processes

    Sebastian, R. G., Obertscheider, C., Fauster, E. & Schledjewski, R., 13 Mar 2019.

    Research output: Contribution to conference › Abstract

  45. Published

    Minimum invasive production-related SLS specimen manufacturing for interface characterization of hybrid materials made by RTM

    Hergan, P., Lechner, C., Fauster, E., Pilz, G. & Schledjewski, R., 15 Jan 2019, In: International Journal of Advanced Manufacturing Technology. 102.2019, 5-8, p. 1963-1972 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    A methodology for determining preform compaction in bladder-assisted resin transfer molding with elastomeric bladders for tubular composite parts

    Schillfahrt, C., Fauster, E. & Schledjewski, R., Jan 2019, In: International journal of material forming. 12.2019, 1, p. 1-15 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Model Based Processing of Hybrid RTM Parts

    Hergan, P., Fauster, E. & Schledjewski, R., 2019.

    Research output: Contribution to conference › Paper › peer-review

  48. 2018
  49. Published

    An experimental method for characterizing unsaturated 1D flow in tubular braided preforms during bladder-assisted resin transfer molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 1 Dec 2018, In: Polymer Composites. 39.2018, 12, p. 4666-4677 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Peel strength characterisation on ply/ply interface using wedge and T-peel/pull-type tests

    Satheesh, B., Tonejc, M., Potakowskyj, L., Pletz, M., Fauster, E., Kaynak, B. & Schledjewski, R., 8 Nov 2018, In: Polymers & Polymer Composites (Polymers and polymer composites). 26.2018, 8-9, p. 431-435 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Experimental characterization of single ply out-of-plane permeability through gaseous flow

    Fauster, E., Vierkötter, C., Appel, L., Lugo, J., Schijve, W. & Heider, D., Sept 2018, In: Polymer Composites. 39.2018, 9, p. 3247-3258 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Real-time tensor polynomial approximation of crosshatch measured geometric surface data

    Harker, M., O'Leary, P., Plessing, L., Hergan, P. & Fauster, E., 10 Jul 2018, I2MTC 2018 - 2018 IEEE International Instrumentation and Measurement Technology Conference: Discovering New Horizons in Instrumentation and Measurement, Proceedings. Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Application of vibrating vents to control void content of RTM parts

    Hergan, P., Fauster, E. & Schledjewski, R., Jul 2018, Proceedings of SAMPE Europe Conference 2018. 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Image processing and data evaluation algorithms for reproducible optical in-plane permeability characterization by radial flow experiments

    Fauster, E., Berg, D. C., Abliz, D., Grössing, H., Meiners, D., Ziegmann, G. & Schledjewski, R., 17 Jun 2018, In: Journal of composite materials. 53.2019, 1, p. 45-63 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Using (VA)RTM with a Rigid Mould to Produce Fibre Metal Laminates with Proven Impact Strength

    Hergan, P., Li, Y., Zaloznik, L., Kaynak, B., Arbeiter, F., Fauster, E. & Schledjewski, R., 11 Jun 2018, In: Journal of Manufacturing and Materials Processing. 2.2018, 2, 12 p., 38.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Forming of complex-shaped composite tubes using optimized bladder-assisted resin transfer molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 2 May 2018, Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. Vol. 1960. 020027

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. E-pub ahead of print

    Robust evaluation of flow front data for in-plane permeability characterization by radial flow experiments

    Fauster, E., Berg, D. C., May, D., Blößl, Y. & Schledjewski, R., 5 Mar 2018, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 4.2018, 1, p. 24-40 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Influence of processing parameters on quality factors of one-shot hybrid structures made by RTM

    Hergan, P., Beter, J., Stelzer, S., Fauster, E. & Schledjewski, R., 21 Feb 2018, In: Production Engineering : research and development. 12.2018, 2, p. 185-194 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Experimental Process Pressure Analysis for Model-Based Manufacturing of Composites by Resin Transfer Moulding

    Fauster, E., Thirunavukkarasu, J., Hergan, P. & Schledjewski, R., 2018, IOP Conference Series: Materials Science and Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Permeability of textile fabrics for fibre-reinforced polymer composites: Experimental methods, data analytics and application

    Fauster, E., 2018

    Research output: Thesis › Habilitation thesis › peer-review

  61. Accepted/In press

    POLYNOMIAL SURFACE MODELLING OF FLOW FRONT DATA FOR IN-PLANE PERMEABILITY CHARACTERIZATION OF TEXTILE FABRICS BY RADIAL FLOW EXPERIMENTS

    Fauster, E., Berg, D. C., May, D., Blößl, Y. & Schledjewski, R., 2018, (Accepted/In press).

    Research output: Contribution to conference › Paper › peer-review

  62. Published

    Quality controlled manufacturing of Hybrid-Metal CRFP Composites by Resin Transfer Moulding

    Fauster, E., Hergan, P. & Schledjewski, R., 2018, Proceedings ICMAC 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. 2017
  64. Published

    Permeability Customisation through Preform Manipulation Utilising 3D-Printing Technology

    Tonejc, M., Pletz, M., Fauster, E. & Schledjewski, R., 1 Nov 2017, In: Polymers and Polymer Composites. 25.2017, 9, p. 651-660 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Permeability Customisation Through Preform Manipulation Utilizing 3D-Printing Technology

    Tonejc, M., Pletz, M., Fauster, E. & Schledjewski, R., 1 Nov 2017, In: Polymers & Polymer Composites (Polymers and polymer composites). 25.2017, 9, p. 643-652 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. E-pub ahead of print

    Influence of process pressures on filling behavior of tubular fabrics in bladder-assisted resin transfer molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 30 Oct 2017, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 3.2017, 4, p. 148-158 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    INFLUENCE OF PROCESSING TEMPERATURES ON THE DEFLECTION OF HYBRID-METAL-CARBON COMPOSITES MADE BY RESIN TRANSFER MOULDING

    Hergan, P., Beter, J., Stelzer, S., Fauster, E. & Schledjewski, R., 25 Aug 2017, Proceedings of the 21st International Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Cascade Injection Procedure for Bladder-assisted Resin Transfer Molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 21 Aug 2017. 11 p.

    Research output: Contribution to conference › Paper › peer-review

  69. Published

    HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding

    Fauster, E., Hergan, P., Stelzer, S., Scheiblhofer, S., Cespedes-Gonzales, G., Pfeifer, S., Rittenschober, B., Sieberer, M., Lauermann, M. & Schledjewski, R., 7 Jul 2017.

    Research output: Contribution to conference › Paper › peer-review

  70. Published

    HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding

    Fauster, E., 6 Jul 2017.

    Research output: Contribution to conference › Presentation › Research

  71. Published

    Modell-Basierte FKV-Verarbeitungstechnik an Beispielen der Flüssigimprägnierverfahren

    Fauster, E., Hergan, P., Thirunavukkarasu, J., Vilaca Lourenco, G. & Schledjewski, R., 21 Apr 2017.

    Research output: Contribution to conference › Poster › Research

  72. Published

    Verarbeitung von Verbundwerkstoffen

    Schledjewski, R. & Fauster, E., Apr 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 7. p. 265-266

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Verarbeitung von Verbundwerkstoffen

    Schledjewski, R. & Fauster, E., Apr 2017.

    Research output: Contribution to conference › Poster › Transfer

  74. Published

    Hybride Verbundwerkstoffe: Potenziale und Herausforderungen

    Hergan, P., Fauster, E., Stelzer, S., Pinter, G. & Schledjewski, R., 24 Mar 2017.

    Research output: Contribution to conference › Abstract › peer-review

  75. Published

    Delamination properties of hybrid steel- carbon composite materials produced via resin transfer molding

    Stelzer, S., Brandstetter, D., Hergan, P., Fauster, E. & Pinter, G. G., 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  76. Published

    In-Plane Permeability Characterization of Reinforcing Fabrics Based on Radial-Flow Experiments: Comparative Studies

    Fauster, E., 2017.

    Research output: Contribution to conference › Presentation › Research

  77. Published

    Modell-Basierte FKV-Verarbeitungstechnik an Beispielen der Flüssigimprägnierverfahren

    Fauster, E., Hergan, P., Thirunavukkarasu, J., Vilaca Lourenco, G. & Schledjewski, R., 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. 2016
  79. Published

    Model based processing as possibility for quality assured manufacturing with ARTM

    Schledjewski, R., Hergan, P. & Fauster, E., 27 Oct 2016.

    Research output: Contribution to conference › Presentation › Research

  80. Published

    ROBUST OPTICAL 2D PERMEABILITY CHARACTERIZATION OF REINFORCING FABRICS

    Fauster, E., 29 Jun 2016.

    Research output: Contribution to conference › Presentation › Research

  81. Published

    ROBUST OPTICAL 2D PERMEABILITY CHARACTERIZATION OF REINFORCING FABRICS

    Fauster, E., Grössing, H., Fellner, K. & Schledjewski, R., 26 Jun 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    An evaluation of the reproducibility of ultrasonic sensor-based out-of-plane permeability measurements: a benchmarking study

    Becker, D., Grössing, H., Konstantopoulos, S., Fauster, E., Mitschang, P. & Schledjewski, R., 1 Jun 2016, In: Advanced Manufacturing: Polymer and Composites Science. 2.2016, 1, p. 34-45 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding

    Fauster, E., 21 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  84. Published

    HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding

    Fauster, E., Hergan, P. & Schledjewski, R., 20 Apr 2016, Proceedings of Euro Hybrid 2: Materials and Structures 2016. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Automated profile preforming for structural components

    Fauster, E., Schillfahrt, C., Hueber, C. & Schledjewski, R., 19 Apr 2016, In: Science and Engineering of Composite Materials. 24.2016, 5, p. 631-650 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    A model-based concept for an optimized resin transfer moulding process

    Hergan, P., Fauster, E. & Schledjewski, R., 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. 2015
  88. E-pub ahead of print

    Compaction behavior of continuous carbon fiber tows: an experimental analysis

    Kastanis, D., Steiner, H., Fauster, E. & Schledjewski, R., 12 Nov 2015, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 1.2015, 3, p. 169-174 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Accurate, Reproducible and Robust In-Plane Permeability Characterization with a Low-Budget Test Rig: A Challenge or Straightforward?

    Grössing, H., Fauster, E. & Schledjewski, R., 29 Oct 2015, SAMPE CAMX, Dallas, Tx, USA, 26.-29.10.2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Automatisierte Prozessführung und Qualitätskontrolle in der FKV-Verarbeitung

    Fauster, E., 16 Oct 2015.

    Research output: Contribution to conference › Presentation › Research

  91. Published

    Utilizing Fused Deposition Modeling Techniques in Composite Processing

    Tonejc, M., Grössing, H., Habicher, M., Fauster, E. & Schledjewski, R., 24 Sept 2015, Proceedings Polymer Processing Society Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. Published

    A Comparison of Two Measurement Techniques for Determining the 2D Permeability Characteristics of Reinforcing Textiles

    Fauster, E., 23 Jul 2015.

    Research output: Contribution to conference › Presentation › Research

  93. Published

    Optical Permeability Measurement on Tubular Braided Reinforcing Textiles

    Schillfahrt, C., Fauster, E. & Schledjewski, R., Jul 2015, Proceedings of the 20th International Conference on Composite Materials. 12 p. 3406-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Automated Composite Manufacturing by Means of Model Based Process Control

    Schledjewski, R. & Fauster, E., 24 Jun 2015.

    Research output: Contribution to conference › Poster › Research

  95. Published

    Flow Front Advancement during Composite Processing: Predictions from Numerical Filling Simulation Tools in Comparison with Real-World Experiments

    Grössing, H., Fauster, E., Schledjewski, R., Stadlmajer, N. & Fleischmann, M., 5 May 2015, In: Polymer Composites. p. 1-12 DOI 10.1002/pc.23474.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Efficient Manufacturing of Aeronautic CFRP-Structures through Automated Profile Preforming

    Fauster, E., 24 Apr 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  97. Published

    Efficient Manufacturing of Aeronautic CFRP-Structures through Automated Profile Preforming

    Fauster, E., Schillfahrt, C. & Schledjewski, R., 23 Apr 2015.

    Research output: Contribution to conference › Abstract › peer-review

  98. Published

    splineTEX - Industrielle Fertigung von gekrümmten Faserverbundrohren durch Einsatz von Flüssigimprägnierverfahren

    Schillfahrt, C., Fauster, E., Schledjewski, R., Troi, V. & Schennach, O., 6 Mar 2015.

    Research output: Contribution to conference › Paper › peer-review

  99. Published

    Influence of Textile Parameters on the Preform In-Plane Permeability Characteristics of Non-Crimp Fabric Preforms

    Grössing, H., Fauster, E., Schledjewski, R. & Weninger, M., 1 Feb 2015, In: Polymer Composites. p. 1-10 DOI 10.1002/pc.23360.

    Research output: Contribution to journal › Article › Research › peer-review

  100. E-pub ahead of print

    Influence of textile parameters on the in-plane permeability characteristics of non-crimped fabric preforms

    Grössing, H., Fauster, E., Weninger, M. & Schledjewski, R., 23 Jan 2015, (E-pub ahead of print) In: Polymer Composites. 37.2016, 6, p. 1854-1863 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Automated Profile Preforming for Aerospace Applications

    Schillfahrt, C., Fauster, E. & Schledjewski, R., Jan 2015, In: JEC Composites Magazine. 94, p. 43-45 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Accurate, reproducible and robust in-plane permeability characterization with a lowbudget test rig: A challenge or straightforward?

    Grössing, H., Fauster, E. & Schledjewski, R., 2015, p. 267-283. 17 p.

    Research output: Contribution to conference › Paper › peer-review

  103. Published

    A Comparison of two Measurement Techniques for Determining the 2D Permeability Characteristics of Reinforcing Textiles

    Fauster, E., Grössing, H. & Schledjewski, R., 2015, Proceedings of the 20th International Conference of Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  104. Published

    A Study on Geometrical Parameters Influencing the Mechanical Spreading of Fibre Bundles

    Tonejc, M., Steiner, H., Fauster, E., Konstantopoulos, S. & Schledjewski, R., 2015, Proceedings of the 20th International Conference of Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  105. Published

    Influence of Test Rig Configuation and Evaluation Algorithms on Optical Radial-Flow Permeability Measurement: A Benchmark Exercise

    Berg, D. C., Fauster, E., Abliz, D., Grössing, H., Meiners, D., Schledjewski, R. & Ziegmann, G., 2015, Proceedings of the 20th International Conference of Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  106. Published

    Influence of test rig configuration and evaluation algorithms on optical radial-flow permeability measurement: A benchmark exercise

    Berg, D. C., Fauster, E., Abliz, D., Grössing, H., Meiners, D., Schledjewski, R. & Ziegmann, G., 2015.

    Research output: Contribution to conference › Paper › peer-review

  107. 2014
  108. Published

    Automated Preforming of Profiles for Efficient LCM-Processing of Structural Components in Aeronautic Applications

    Fauster, E., Schillfahrt, C. & Schledjewski, R., 2014, Proceedings of Reinforced Plastics 2014 International BALATON Conference. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  109. Published

    Comparison of Algorithms for 2D Anisotropic Permeability Calculation in Terms of Uncertainty Propagation

    Fauster, E., Grössing, H. & Schledjewski, R., 2014, Proceedings of the 16th European Conference on Composite Materials. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  110. Published

    Effiziente Verarbeitung von Luftfahrt-Strukturbauteilen durch Einsatz automatisierter Profil-Preformfertigung

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 2014, 23. Leobener Kunststoff-Kolloquium: Hocheffiziente Verbundwerkstoffe. Schledjewski, R. (ed.). Eigenverlag, p. 29-39 10 p. (Schriftenreihe Kunststofftechnik Leoben; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  111. Published

    Ganzheitliche Prozessentwicklung im Bereich der Legetechnik

    Tonejc, M., Pazour, P., Fauster, E. & Schledjewski, R., 2014, Schriftenreihe Kunststofftechnik Leoben. p. 17-27

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  112. Published

    Monitoring the production of FRP composites: A review of in-line sensing methods

    Konstantopoulos, S., Fauster, E. & Schledjewski, R., 2014, In: Express Polymer Letters. 8, p. 823-840

    Research output: Contribution to journal › Article › Research › peer-review

  113. Published

    Optische Messtechnik zur Charakterisierung von textilen Verstärkungsstrukturen

    Fauster, E., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  114. 2013
  115. Published

    Accurate 2d permeability measurement: Optical permeability characterization

    Grössing, H., Fauster, E. & Schledjewski, R., 2013, Novel Aspects in Composite Technologies: from Fibre to lightweight Structures. p. 34-40

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  116. Published

    An adaptive modular monitoring & control system for composites manufacturing processes

    Konstantopoulos, S., Fauster, E. & Schledjewski, R., 2013, Processing of fibre composites - challenges for maximum materials performance. p. 261-271

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  117. Published

    In-line cure monitoring of composite materials based on kinetic model analysis assisted by thermal sensing

    Konstantopoulos, S., Tonejc, M., Fauster, E. & Schledjewski, R., 2013, Proceedings of the 5th ICSAAM. p. -

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  118. Published

    Statistical Uncertainty Analysis of Material and Measurement Parameters for Optical Permeability Determination

    Fauster, E., Grössing, H. & Schledjewski, R., 2013, Proceedings of CompositesWeek@Leuven. p. --8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  119. Published

    Statistical Uncertainty Analysis of Material and Measurement Parameters for Optical Permeability Determination

    Fauster, E., Grössing, H. & Schledjewski, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  120. Published

    Uncertainty analysis for optical permeability measurement of reinforcing textiles

    Fauster, E., Grössing, H. & Schledjewski, R., 2013, Composite Materials: The great advance. p. 4685-4694

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  121. 2012
  122. Published

    A Model-Based Processing Concept for Thermoplastic Tape Placement

    Fauster, E. & Schledjewski, R., 2012, SAMPE 2012 Technical Conference Proceedings: Connecting the Advanced Materials Community. p. --8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  123. Published

    A Modular Model-Based Processing Concept for an Optimized Pultrusion Process Management

    Fauster, E., Kastanis, D. & Schledjewski, R., 2012, Proceedings of ECCM 15. p. --8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  124. Published

    Modell-basierte Verarbeitung von Faser-Kunststoff-Verbunden

    Fauster, E., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  125. 2011
  126. Published

    Status und Potentiale der Automation in der Verarbeitung von Faser-Kunststoff-Verbunden

    Fauster, E., Kastanis, D. & Schledjewski, R., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 59-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  127. 2010
  128. Published

    Integrated solutions for a fully-automated grinding of surface flaws on semi-finished steel products

    Richter, G., Ofner, R. & Fauster, E., 2010, In: SEAISI quarterly. 39, 3, p. 31-40 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  129. 2009
  130. Published

    Integrated solutions for a fully-automated grinding of surface flaws on semi-finished products

    Richter, G., Ofner, R. & Fauster, E., 2009, AISTech 2009 - Proceedings of the Iron and Steel Technology Conference. p. 1133-1149 17 p. (AISTech - Iron and Steel Technology Conference Proceedings; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  131. Published

    Thermographic crack detection and failure classification

    Oswald-Tranta, B., Fauster, E., Sorger, M. & O'Leary, P., 2009, Thermographic crack detection and failure classification.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  132. 2008
  133. Published

    Methods of Statistical Uncertainty Analysis Applied to Evaluation Algorithms of a Video Extensometer System

    O'Leary, P. & Fauster, E., 2008, Electronic Imaging: Image Processing: Machine Vision Applications. SPIE, The Internat. Soc. for Optical Engineering, p. 68130O-1-68130O-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  134. Published

    Statistical Uncertainty Analysis for Image Processing Algorithms in Metric Vision Systems

    Fauster, E., 2008

    Research output: Thesis › Doctoral Thesis

  135. 2007
  136. Published

    Magneto-thermische Rissprüfung an Auspuffteilen

    Oswald-Tranta, B., Sorger, M. & Fauster, E., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  137. Published

    Oberflächeninspektion von Stahl- und Kupferblechen

    Schalk, P., Fauster, E. & Ofner, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  138. Published

    Optische Inspektion für die automatische Bearbeitung von Langprodukten

    Ofner, R., Fauster, E., Schalk, P. & Koller, N., 2007, Tagungsband Industrielles Symposium Mechatronik Sensorik. p. 119-129

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  139. Published

    Real-Time Geometric Surface Inspection

    Suesut, T., Schalk, P., O'Leary, P., Harker, M. & Fauster, E., 2007, Proceedings ICEAST 2007. p. 415-418

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  140. 2006
  141. Published

    Optical Inspection of Steel Bars for Automatic Grinding of Surface Defects

    Fauster, E., Koller, N., Ofner, R. & O'Leary, P., 2006, XXV.Verformungskundliches Kolloguium. p. 5-17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  142. Published

    Optical Servoing for Industrial Surface Machining

    Koller, N., Ofner, R., O'Leary, P. & Fauster, E., 2006, Proceeding of Electronic Imaging, Machine Vision Applications in Industrial Inspection XIV. p. 607001-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  143. 2005
  144. Published

    Development and implementation of a video extensometer system

    Fauster, E., Steinberger, R. & Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  145. Published

    Development and implementation of non-contact strain and deformation test methods for polymeric materials and components

    Fauster, E., Steinberger, R., Major, Z., O'Leary, P. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  146. Published

    Evaluation and Calibration Methods for the Application of a Video-Extensometer to Tensile Testing of Polymer Materials

    Fauster, E., Schalk, P. & O'Leary, P., 2005, Machine Vision Applications in Industrial Inspection XIII. p. 187-198

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  147. Published

    High-temperature video-extensometry for material testing of refractories

    Schalk, P., Fauster, E. & O' Leary, P., 2005, Machine Vision Applications in Industrial Inspection XIII, Electronic Imaging, Science and Technology. p. 129-139

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  148. Published

    Non-Destructive material and component testing

    Fauster, E., Steinberger, R. & Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  149. 2004
  150. Published

    Framework for automatic quality control in industrial environments using distributed image processing

    Schalk, P., Fauster, E., O'Leary, P. & Weiss, M., Jul 2004, In: Journal of electronic imaging. 13, 3, p. 504-514

    Research output: Contribution to journal › Article › Research › peer-review

  151. 2003
  152. Published

    Development of a Distributed Vision System for Industrial Conditions

    Weiss, M., Schiller, A., O'Leary, P., Fauster, E. & Schalk, P., 1 Dec 2003, In: Proceedings of SPIE - The International Society for Optical Engineering. 5132, p. 91-102 12 p.

    Research output: Contribution to journal › Conference article › peer-review

View graph of relations

Contact

Phone: 2708

Latest Research Output

View more (129)