Christian Kukla

(Former)

1 - 100 out of 119Page size: 100

Research output

  1. 2025
  2. Published

    Interaction of Binder and Powder in Processing of Titanium by MEX-AM

    Kukla, C., Gordo, E., Schuschnigg, S., Villemur, J., Luna, P. & Holzer, C., 2025, The 7th Powder Metallurgy and Additive Manufacturing of Titanium (PMTi 2024): Selected peer-reviewed extended articles based on abstracts presented at the 7th International Conference on Powder Metallurgy and Additive Manufacturing of Titanium (PMTi2024). Gordo Odériz, E. & Ruiz-Navas, E. M. (eds.). Trans Tech Publications, p. 93-103

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. 2024
  4. Published

    Feedstock Development for Material Extrusion of Aluminium: Printability and Debinding

    Schuschnigg, S., Momeni, V. & Kukla, C., 21 Nov 2024, 32nd Leoben-Conference on Polymer Engineering and Science: New Materials New Perspectives. Leoben, Vol. 32. p. 132 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Supportless lattice structure of 316L stainless steel fabricated by material extrusion additive manufacturing: Effect of relative density on physical, microstructural and mechanical behaviour

    Parsompech, N., Suwanpreecha, C., Noraphaiphipaksa, N., Hararak, B., Songkuea, S., Schuschnigg, S., Kukla, C., Kanchanomai, C. & Manonukul, A., 14 Sept 2024, In: Materials Science and Engineering: A. 915.2024, November, 14 p., 147270.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Selecting the suitable thermoplastic elastomer as the main component in the feedstock for metal material extrusion of aluminium

    Momeni, V., Shahroodi, Z., Hufnagl, M., Gonzalez-Gutierrez, J., Duretek, I., Schuschnigg, S., Kukla, C. & Holzer, C., 8 Aug 2024, In: Results in Engineering. 23.2024, September, 12 p., 102692.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Binder System Composition on the Rheological and Magnetic Properties of Nd-Fe-B Feedstocks for Metal Injection Molding

    Momeni, V., Luca, S., Gonzalez-Gutierrez, J., Cano, S., Sueur, E., Shahroodi, Z., Schuschnigg, S., Kukla, C. & Holzer, C., Jul 2024, In: Applied Sciences (Switzerland). 14.2024, 13, 15 p., 5638.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Bio-Based Backbone for Highly Reactive Metal Alloys Feedstocks for MEX

    Holzer, C., Momeni, V., Pöhle, G., Riecker, S., Schuschnigg, S. & Kukla, C., 19 May 2024.

    Research output: Contribution to conference › Paper › peer-review

  9. Published

    Production of Permanent Magnets from Recycled NdFeB Powder with Powder Extrusion Moulding

    Rathfelder, S., Schuschnigg, S., Kukla, C., Holzer, C. & Burkhardt, C., 18 Apr 2024, In: Journal of Manufacturing and Materials Processing. 8.2024, 2, 19 p., 81.

    Research output: Contribution to journal › Article › Research › peer-review

  10. E-pub ahead of print

    Comparative analysis of binder systems in copper feedstocks for metal extrusion additive manufacturing and metal injection moulding

    Sadaf, M., Cano Cano, S., Bragaglia, M., Schuschnigg, S., Kukla, C., Holzer, C., Vály, L., Kukla, C., Kitzmantel, M., Nanni, F. & Gonzalez-Gutierrez, J., 21 Feb 2024, (E-pub ahead of print) In: Journal of Materials Research and Technology. 29.2024, March-April, p. 4433-4444 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Polylactic Acid (PLA) as Backbone for the Fused Filament Fabrication (FFF) of Aluminium

    Kukla, C., Momeni, V., Schuschnigg, S. & Holzer, C., 2024, Proceedings - Euro PM 2024 Congress and Exhibition. (Proceedings - Euro PM 2024 Congress and Exhibition).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. 2023
  13. Published

    Susmagpro

    Schuschnigg, S. & Kukla, C., 7 Sept 2023.

    Research output: Contribution to conference › Poster › Research

  14. Published

    Debinding And Sintering Strategies For Fused Filament Fabrication Of Aluminium Alloys

    Poehle, G., Quadbeck, P., Riecker, S., Kukla, C., Momeni, V. & Schuschnigg, S., Sept 2023, Euro Powder Metallurgy 2023 Congress & Exhibition.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Filament Development for Metallic Fused Filament Fabrication of Aluminium Alloys

    Kukla, C., Momeni, V., Poehle, G., Riecker, S. & Schuschnigg, S., Sept 2023, Euro Powder Metallurgy 2023 Congress & Exhibition.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Effects of Different Polypropylene (PP)-Backbones in Aluminium Feedstock for Fused Filament Fabrication (FFF)

    Momeni, V., Shahroodi, Z., Gonzalez-Gutierrez, J., Hentschel, L., Duretek, I., Schuschnigg, S., Kukla, C. & Holzer, C., 11 Jul 2023, In: Polymers. 15.2023, 4, 18 p., 3007.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Current challenges in NdFeB permanent magnets manufacturing by Powder Injection Molding (PIM): A review

    Crozier-Bioud, T., Momeni, V., Gonzalez-Gutierrez, J., Kukla, C., Luca, S. & Rolere, S., May 2023, In: Materials today. Physics. 34.2023, May, 13 p., 101082.

    Research output: Contribution to journal › Review article › peer-review

  18. Published

    Multifunctional Ti3AlC2-Based Composites via Fused Filament Fabrication and 3D Printing Technology

    Liu, D., Hentschel, L., Lin, G., Kukla, C., Schuschnigg, S., Ma, N., Wallis, C., Momeni, V., Kitzmantel, M. & Sui, G., 25 Apr 2023, In: Journal of Materials Engineering and Performance. 32.2023, 20, p. 9174-9181 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Research Progress on Low-Pressure Powder Injection Molding

    Momeni, V., Hufnagl, M., Shahroodi, Z., Gonzalez-Gutierrez, J., Schuschnigg, S., Kukla, C. & Holzer, C., Jan 2023, In: Materials. 16.2023, 1, 44 p., 379.

    Research output: Contribution to journal › Review article › peer-review

  20. Published

    Validation Of Alternative Binders for Pellet Extrusion 3D Printing Of 316L Steels

    de la Camacha, A. G., Tabares, E., Jiménez-Morales, A., Schsuchnigg, S., Kukla, C., Cano, S. & Gordo, E., 2023.

    Research output: Contribution to conference › Paper › peer-review

  21. 2022
  22. Published

    Influence of Binder Composition and Material Extrusion (MEX) Parameters on the 3D Printing of Highly Filled Copper Feedstocks

    Sadaf, M., Cano Cano, S., Gonzalez-Gutierrez, J., Bragaglia, M., Schuschnigg, S., Kukla, C., Holzer, C., Vály , L., Kitzmantel, M. & Nanni, F., 16 Nov 2022, In: Polymers / Molecular Diversity Preservation International. 14.2022, 22, 23 p., 4962.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Effect of Increased Powder-Binder Adhesion by Backbone Grafting on the Properties of Feedstocks for Ceramic Injection Molding

    Ghasemi-Mobarakeh, L., Cano, S., Momeni, V., Liu, D., Duretek, I., Riess, G., Kukla, C. & Holzer, C., 2 Sept 2022, In: Polymers. 14.2022, 17, 15 p., 3653.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Developing a Feedstock for the Fused Filament Fabrication (FFF) of Aluminium

    Momeni, V., Shahroodi, Z., Kukla, C. & Holzer, C., Sept 2022, Conference: 2nd International Conference on Polymer Process Innovation.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Metal fused filament fabrication of the nickel-base superalloy IN 718

    Thompson, Y., Zissel, K., Förner, A., Gonzalez-Gutierrez, J., Kukla, C., Neumeier, S. & Felfer, P., 3 Feb 2022, In: Journal of materials science. 57.2022, June, p. 9541-9555 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Filamentbasierter 3D-Druck für Metalle, Hartmetalle und Cermets

    Kukla, C., Duretek, I. & Lengauer, W., 2022, Pulvermetallurgie in Wissenschaft und Praxis: Pulvermetallurgie - vielfältige Prozesse und Werkstoffe. Broeckmann, C., Danninger, H. & Kaletsch, A. (eds.). Vol. 37. p. 75-103

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. 2021
  28. Published

    Effect of metal particle size and powder volume fraction on the filling performance of powder injection moulded parts with a microtextured surface

    Ammosova, L., Cano Cano, S., Schuschnigg, S., Kukla, C., Mönkkönen, K., Suvanto, M. & Gonzalez-Gutierrez, J., Nov 2021, In: Precision Engineering. 72.2021, November, p. 604-612 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Material extrusion additive manufacturing of multi-material components

    Cano Cano, S., Valy, L., Liu, D., Maurer, P., Ma, N., Czernilofsky, F., Schuschnigg, S., Sui, G., Kitzmantel, M., Kukla, C. & Gonzalez-Gutierrez, J., 15 Sept 2021, 29th Leoben-Conference on Polymer Engineering & Science. p. 184 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Fused Filament Fabrication-Based Additive Manufacturing of Commercially Pure Titanium

    Thompson, Y., Polzer, M., Gonzalez-Gutierrez, J., Kasian, O., Heckl, J. P., Dalbauer, V., Kukla, C. & Felfer, P., 12 Sept 2021, In: Advanced Engineering Materials. 23.2021, 12, 12 p., 2100380.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Bending Properties of Lightweight Copper Specimens with Different Infill Patterns Produced by Material Extrusion Additive Manufacturing, Solvent Debinding and Sintering

    Gonzalez-Gutierrez, J., Cano Cano, S., Ecker, J. V., Kitzmantel, M., Arbeiter, F., Kukla, C. & Holzer, C., 6 Aug 2021, In: Applied Sciences : open access journal. 11, 16, 7262.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Powder content in powder extrusion moulding of tool steel: Dimensional stability, shrinkage and hardness

    Gonzalez-Gutierrez, J., Thompson, Y., Handl, D., Cano Cano, S., Schuschnigg, S., Felfer, P., Kukla, C., Holzer, C. & Burkhardt, C., 15 Jan 2021, In: Materials letters. 283, January 2021, 5 p., 128909.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Effect of backbone selection on the solvent debinding of metal injection moulding feedstocks

    Kukla, C., Cano, S., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 2021, Euro PM2021 Congress Proceedings. (Euro PM2021 Congress Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. 2020
  35. Published

    Rheological Behaviour of Highly Filled Materials for Injection Moulding and Additive Manufacturing: Effect of Particle Material and Loading

    Bek, M., Gonzalez-Gutierrez, J., Kukla, C., Pušnik Crešnar, K., Maroh, B. & Slemenik Perše, L., 2 Nov 2020, In: Applied Sciences : open access journal. 10, 22, p. 1-23 23 p., 7993.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Factors Affecting the Properties of POM-based Feedstocks for Fused Filament Fabrication/FFF

    Kukla, C., Hentschel, L., Cano Cano, S., Kitzmantel, M., Holzer, C. & Gonzalez-Gutierrez, J., 5 Oct 2020. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  37. Published

    Additive Fertigung metallischer und keramischer Bauteile: Einsatz der Materialextrusion insbesondere der Verwendung von Filamenten für Sinterverfahren

    Kukla, C., Schuschnigg, S. & Holzer, C., Aug 2020, In: Industrie 4.0 Management. 36.2020, 4, p. 20-24 5 p.

    Research output: Contribution to journal › Article › Research

  38. Published

    Influence of the Infill Orientation on the Properties of Zirconia Parts Produced by Fused Filament Fabrication

    Cano Cano, S., Lube, T., Huber, P., Gallego, A., Naranjo, J. A., Berges, C., Schuschnigg, S., Herranz, G., Kukla, C., Holzer, C. & Gonzalez-Gutierrez, J., 15 Jul 2020, In: Materials. 13.2020, 14, 19 p., 3158.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Modification of Interfacial Interactions in Ceramic-Polymer Nanocomposites by Grafting: Morphology and Properties for Powder Injection Molding and Additive Manufacturing

    Cano Cano, S., Gooneie, A., Kukla, C., Rieß, G., Holzer, C. & Gonzalez-Gutierrez, J., 21 Feb 2020, In: Applied Sciences : open access journal. 10.2020, 4, 18 p., 1471.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Production of multimaterial components by material extrusion - Fused filament fabrication (ME-FFF)

    Kukla, C., Cano, S., Moritz, T., Müller-Köhn, A., Günther, A., Hampel, S. & Holzer, C., 2020, Euro PM 2018 Congress and Exhibition. (Euro PM 2018 Congress and Exhibition).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. 2019
  42. Published

    Influence of stearic acid in feedstocks for FFF and PIM

    Kukla, C., Cano Cano, S., Holzer, C. & Gonzalez-Gutierrez, J., 16 Oct 2019.

    Research output: Contribution to conference › Paper › peer-review

  43. Published

    Der Filamentdruck als Verfahren zur Herstellung von metallischen Komponenten

    Kukla, C. & Maurath, J., Oct 2019, In: Galvanotechnik : älteste Fachzeitschrift für die Praxis der Oberflächentechnik. 110.2019, 10, p. 1856-1861 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Steel parts produced by material extrusion additive manufacturing, solvent debinding and sintering

    Gonzalez-Gutierrez, J., Thompson, Y., Cano Cano, S., Felfer, P., Kukla, C. & Holzer, C., 30 Sept 2019, Materials Science and Technology 2019 Conference Proceedings. p. 264-266 3 p. 139-137130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Fused filament fabrication, debinding and sintering as a low cost additive manufacturing method of 316L stainless steel

    Thompson, Y., Gonzalez-Gutierrez, J., Kukla, C. & Felfer, P., 9 Sept 2019, In: Additive Manufacturing. 30.2019, December, 8 p., 100861.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Fabrication and properties of extrusion-based 3D-printed hardmetal and cermet components

    Lengauer, W., Duretek, I., Fürst, M., Schwarz, V., Gonzalez-Gutierrez, J., Schuschnigg, S., Kukla, C., Kitzmantel, M., Neubauer, E., Lieberwirth, C. & Morrison, V., 1 Aug 2019, In: International Journal of Refractory Metals and Hard Materials. 82.2019, August, p. 141-149 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Fused Filament Fabrication of Metals and Ceramics for Special Applications

    Cano Cano, S., Holzer, C., Gonzalez-Gutierrez, J., Kukla, C. & Schuschnigg, S., 1 Aug 2019, 9 ed. Leykam Buchverlag. 15 p. (Industrial Management; no. 9)

    Research output: Book/Report › Anthology › Research

  48. Published

    Debinding behaviour of feedstock for material extrusion additive manufacturing of zirconia

    Kukla, C., Cano Cano, S., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 15 May 2019, In: Powder Metallurgy. 2019, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Rheological behaviour of highly-filled polymers for Metal Injection Moulding

    Kukla, C., Slemenik Perše, L., Bek, M., Gonzalez-Gutierrez, J. & Holzer, C., 9 Apr 2019. 1 p.

    Research output: Contribution to conference › Poster › Research

  50. Published

    Rheological behaviour of highly-filled polymers for Metal Injection Moulding

    Bek, M., Gonzalez-Gutierrez, J., Slemenik Perše, L., Holzer, C. & Kukla, C., 8 Apr 2019, p. 117-117. 1 p.

    Research output: Contribution to conference › Abstract

  51. Published

    Tensile properties of sintered 17-4PH stainless steel fabricated by material extrusion additive manufacturing

    Gonzalez-Gutierrez, J., Arbeiter, F., Schlauf, T., Kukla, C. & Holzer, C., 8 Apr 2019, In: Materials letters. 248.2019, 1 August, p. 165-168 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Filament-extrusion 3D printing of hardmetal and cermet parts

    Lengauer, W., Duretek, I., Fürst, M., Gonzalez-Gutierrez, J., Schuschnigg, S. & Kukla, C., 25 Mar 2019, p. 77-78. 2 p.

    Research output: Contribution to conference › Paper › peer-review

  53. Published

    Additive manufacturing of zirconia parts by fused filament fabrication and solvent debinding: Selection of binder formulation

    Cano Cano, S., Gonzalez-Gutierrez, J., Sapkota, J., Spörk, M., Arbeiter, F., Schuschnigg, S., Holzer, C. & Kukla, C., 1 Mar 2019, In: Additive Manufacturing. 26.2019, March, p. 117–128 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Fused Filament Fabrication (FFF) of Metal-Ceramic Components

    Abel, J., Scheithauer, U., Janics, T., Hampel, S., Cano Cano, S., Müller-Köhn, A., Günther, A., Kukla, C. & Moritz, T., 11 Jan 2019, In: JoVE. 2019, 143, p. 1-13

    Research output: Contribution to journal › Article › Research › peer-review

  55. 2018
  56. Published

    Rheology of Highly Filled Polymers

    Kukla, C., Duretek, I., Gonzalez-Gutierrez, J. & Holzer, C., 3 Oct 2018, Polymer Rheology. Rivera-Armenta, J. L. & Salazar-Cruz, B. A. (eds.). London, United Kingdom, p. 153- 173 21 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  57. Published

    Potential of Extrusion Based 3D-printed Hardmetal and Cermet Parts

    Kitzmantel, M., Lengauer, W., Duretek, I., Schwarz , V., Kukla, C., Lieberwirth, C., Morrison, V., Wilfinger, T. & Neubauer, E., 30 Sept 2018, p. 938-945. 7 p.

    Research output: Contribution to conference › Paper › peer-review

  58. Published

    Influence of filler types onto the viscosity of highly filled polymers.

    Kukla, C., Slemenik Perše, L., Bek, M., Gonzalez-Gutierrez, J. & Holzer, C., 19 Sept 2018, International Conference on Polymers and Moulds Innovations: Conference Proceedings. Pontes, A. (ed.). Guimaraes, Portugal, Vol. 8. 6 p. P120

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives

    Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Kukla, C., Sapkota, J. & Holzer, C., 18 May 2018, In: Materials. 11.2018, 5, 36 p., 840.

    Research output: Contribution to journal › Literature review › peer-review

  60. Published

    Feedstocks for the Shaping-Debinding-Sintering Process of Multi Material Components

    Cano Cano, S., Kukla, C., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 19 Apr 2018, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  61. Published

    Feedstocks for the Shaping-Debinding-Sintering Process of Multi Material Components

    Cano Cano, S., Kukla, C., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben, Vol. 27. p. 255 -256 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    Highly-filled Polymers for Fused Filament Fabrication

    Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Holzer, C. & Kukla, C., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben, Vol. 27. p. 93-102 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    Highly filled polymers in production technologies

    Kukla, C., 2018

    Research output: Thesis › Habilitation thesis › peer-review

  64. 2017
  65. Published

    Special Binder Systems for Metal Powders in Highly Filled Filaments for Fused Filament Fabrication

    Gonzalez-Gutierrez, J., Cano Cano, S., Ecker, J., Arbeiter, F., Burkhardt, C., Hampel, S., Kukla, C. & Holzer, C., 14 Dec 2017, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  66. Published

    Special Binder Systems for the Use with Metal Powders for Highly Filled Filaments for Fused Filament Fabrication

    Gonzalez-Gutierrez, J., Kukla, C., Arbeiter, F. & Holzer, C., 14 Dec 2017, 33rd Annual Meeting of the Polymer Processing Society. Cancun, Mexico, Vol. 33. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Isotropic NdFeB hard magnets: MIM production using recycled powders with and without Nd additions

    Burkhardt, C., Weber, O., Podmiljsak, B., Gonzalez-Gutierrez, J., Kukla, C., Degri, M., Harris, I. R. & Walton, A., 1 Dec 2017, In: Powder injection moulding international. 11, 4, p. 75-81 7 p.

    Research output: Contribution to journal › Article › Research

  68. Published

    3D printing conditions determination for feedstock used in fused filament fabrication (FFF) of 17-4PH stainless steel parts

    Gonzalez-Gutierrez, J., Godec, D., Guran, R., Spörk, M., Kukla, C. & Holzer, C., 15 Nov 2017, In: Metalurgija : casopis Izdaje Tehnoloski Fakultet Sveucilista u Zagrebu, Odjeli u Sisku, Institut za Metalurgiju i Zeljezara Sisak = Metallurgy. 57.2018, 1-2, p. 117-120 4 p., 669.15:621.775:669.015:66.049.4:621.385.833=111.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Feedstocks for metal injection moulding: Effect of particle charcateristics and binder composition on the rheological properties and the morphology of metal injection moulding feedstocks

    Kukla, C. & Gonzalez-Gutierrez, J., 15 Nov 2017, WerWasWo.Forschung@MUL 2017. Schuschnigg, S. (ed.). 6 ed. Leoben, Austria, p. 127 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer

  70. Published

    Resource Efficient Production of Magnets: Utilization of recycled rare earth magnetic material for the production of magnets with complex structure and geometry via additive manufacturing and metal injection moulding

    Gonzalez-Gutierrez, J. & Kukla, C., 15 Nov 2017, WerWasWo.Forschung@MUL 2017. Schuschnigg, S. (ed.). 6 ed. Leoben, Austria, p. 78 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer

  71. Published

    The production of magnets by FFF - Fused Filament Fabrication

    Kukla, C., Gonzalez-Gutierrez, J., Burkhardt, C., Weber, O. & Holzer, C., 1 Oct 2017, Euro PM2017 Congress & Exhibition. Milan, Italy: European Powder Metallurgy Association, 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Development of highly-filled polymer compounds for fused filament fabrication of ceramics and solvent debinding

    Cano Cano, S., Gonzalez-Gutierrez, J., Sapkota, J., Kukla, C. & Holzer, C., 27 Jun 2017.

    Research output: Contribution to conference › Presentation › Research

  73. Published

    SHAPING, DEBINDING AND SINTERING OF STEEL COMPONENTS VIA FUSED FILAMENT FABRICATION

    Gonzalez-Gutierrez, J., Godec, D., Kukla, C., Schlauf, T., Burkhardt, C. & Holzer, C., 8 Jun 2017, 16th International Scientific Conference on Production Engineering. Udiljak, T. (ed.). Zadar, Croatia, p. 99 104 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Fused Filament Fabrication (FFF) of PIM Feedstocks

    Kukla, C., Gonzalez-Gutierrez, J., Cano Cano, S., Hampel, S., Burkhardt, C., Moritz, T. & Holzer, C., 7 Jun 2017, ACTAS DEL VI CONGRESO NACIONAL DE PULVIMETALURGIA Y I CONGRESO IBEROAMERICANO DE PULVIMETALURGIA. Herranz, G., Ferrari, B. & Cabrera, J. M. (eds.). Ciudad Real, Spain, Vol. 6. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Fused Filament Fabrication for the production of metal and/or ceramic parts and feedstocks therefore

    Kukla, C., Gonzalez-Gutierrez, J., Cano Cano, S., Burkhardt, C., Hampel, S., Moritz, T. & Holzer, C., 29 May 2017, 19th Plansee Seminar. Reutte, Austria: Plansee AG, Vol. 19. 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Fused Filament Fabrication for the Production of Metal and/or Ceramic Parts and Feedstocks Therefore

    Kukla, C., Gonzalez-Gutierrez, J., Cano Cano, S., Burkhardt, C., Hampel, S., Moritz, T. & Holzer, C., 29 May 2017. 1 p.

    Research output: Contribution to conference › Poster › Research

  77. Published

    FILLER CONTENT AND PROPERTIES OF HIGHLY FILLED FILAMENTS FOR FUSED FILAMENT FABRICATION OF MAGNETS

    Gonzalez-Gutierrez, J., Duretek, I., Arbeiter, F., Kukla, C. & Holzer, C., 9 May 2017, ANTEC® 2017. Anaheim, California, USA, 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    MOLECULAR DYNAMICS SIMULATIONS AS A TOOL FOR MATERIAL SELECTION IN METAL INJECTION MOULDING FEEDSTOCKS

    Gooneie, A., Gonzalez-Gutierrez, J., Kukla, C. & Holzer, C., 24 Apr 2017, CONFERENCE PROCEEDINGS ICIT&APT 2017 10th International Conference on Industrial Tools and Advanced Processing Technologies. Hancic, A. & Grum, J. (eds.). Ljubljana, Slovenia, Vol. 10. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    The SDS process: A viable way for the production of metal parts

    Kukla, C., Gonzalez-Gutierrez, J., Hampel, S., Burkhardt, C. & Holzer, C., 24 Apr 2017, CONFERENCE PROCEEDINGS ICIT&APT 2017 10th International Conference on Industrial Tools and Advanced Processing Technologies. Hancic, A. & Grum, J. (eds.). Vol. 10. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Metal Injection Moulding for the Production of Recycled Rare Earth Magnets

    Gonzalez-Gutierrez, J., Walton, A., Schlauf, T., Burkhardt, C., Kukla, C., Krispin, M. & Holzer, C., 20 Apr 2017. 1 p.

    Research output: Contribution to conference › Poster › Research

  81. Published

    Rheology of PIM feedstocks

    Kukla, C., Duretek, I., Gonzalez-Gutierrez, J. & Holzer, C., 9 Feb 2017, In: Metal Powder Report. 72, 1, p. 39-44 6 p.

    Research output: Contribution to journal › Article › Research

  82. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Kukla, C., Gonzalez-Gutierrez, J., Duretek, I., Schuschnigg, S. & Holzer, C., 2017.

    Research output: Contribution to conference › Paper › peer-review

  83. 2016
  84. Published

    Controlled shear stress method to measure yield stress of highly filled polymer melts

    Kukla, C., Duretek, I. & Holzer, C., 31 Oct 2016, Proceedings of the Regional Conference Graz 2015 - Polymer Processing Society PPS: Conference Papers. Vol. 1779. 070006

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Metal Injection Moulding of NdFeB Based on Recycled Powders

    Imgrund, P., Weber, O., Schlauf, T., Pischang, K., Pickering, L., Walton, A., Gonzalez-Gutierrez, J., Kukla, C. & Burkhardt, C., 9 Oct 2016, World PM2016 Congress & Exhibition. Petzoldt, F. (ed.). Hamburg, Germany: European Powder Metallurgy Association, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Properties for PIM Feedstocks Used in Fused Filament Fabrication

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 9 Oct 2016, World PM2016 Congress & Exhibition. Petzoldt, F. (ed.). Hamburg, Germany: European Powder Metallurgy Association, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Holzer, C., Kukla, C., Duretek, I., Schuschnigg, S. & Gonzalez-Gutierrez, J., 28 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  88. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 25 Jul 2016, p. 299. 1 p.

    Research output: Contribution to conference › Abstract

  89. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 25 Jul 2016, 32nd International Conference of the POLYMER PROCESSING SOCIETY. Maazouz, A. (ed.). Lyon, France, Vol. 32. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Models to Predict the Viscosity of Metal Injection Molding Feedstock Materials as Function of Their Formulation

    Gonzalez-Gutierrez, J., Duretek, I., Kukla, C., Poljšak, A., Bek, M., Emri, I. & Holzer, C., 28 May 2016, In: Metals : open access journal . 6.2016, 6, p. 129-146 17 p., 129.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Fused Filament Fabrication for Metallic Parts

    Gonzalez-Gutierrez, J., Kukla, C., Schuschnigg, S., Duretek, I. & Holzer, C., 14 Apr 2016, 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung- vom Werkstoff zum Produkt. Pinter, G. & Pilz, G. (eds.). Leoben, Austria, Vol. 25. p. 187-188 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. Published

    Fused Filament Fabrication for Metallic Parts

    Gonzalez-Gutierrez, J., Kukla, C., Schuschnigg, S., Duretek, I. & Holzer, C., Apr 2016, p. 1.

    Research output: Contribution to conference › Poster › Research

  93. 2015
  94. Published

    DEVICE FOR MEASURING THE SHEAR STRESS OF A VISCOUS FLUID

    Zurk, A. P. (Inventor) & Kukla, C. (Inventor), 10 Dec 2015, IPC No. G01N 11/ 04 A I, Patent No. WO2015185746, Priority date 5 Jun 2014, Priority No. GB20140010012

    Research output: Patent

  95. Published

    Device for measuring the shear stress of a viscous fluid

    August, P. Z. (Inventor) & Christian, K. (Inventor), 9 Dec 2015, IPC No. G01N 11/ 04 A I, Patent No. GB2526861, Priority date 5 Jun 2014, Priority No. GB20140010012

    Research output: Patent

  96. Published

    Study of rheological behaviour of stainless steel feedstock taking into account the thermal effects

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J., Gooneie, A. & Holzer, C., 30 Nov 2015, IBEREO’15 IBERIAN RHEOLOGY CONFERENCE. Rasteiro, M. G. (ed.). Coimbra, Portugal: Universidad Nacional de Colombia, p. 50-53 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Rheological Behaviour of Bronze Feedstocks at Low Shear Rates

    Kukla, C., Duretek, I., Gonzalez-Gutierrez, J. & Holzer, C., 14 Sept 2015, Euro PM2015 Congress Proceedings. Reims, France: European Powder Metallurgy Association, 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    流動性基材で作製される部品の製造を制御するための音響ノイズ感知

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Müller, F. (Inventor) & Rath, G. (Inventor), 26 Mar 2015, IPC No. B29C 45/ 76 A I, Patent No. JP2015509054, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  99. Published

    ACOUSTIC NOISE SENSING FOR CONTROLLING MANUFACTURE OF A COMPONENT PART MADE OF A FLOWABLE BASE MATERIAL

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor) & Muller, F. (Inventor), 29 Jan 2015, IPC No. B29C 45/ 76 A I, Patent No. US2015028507, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  100. 2014
  101. Published

    MESSUNG VON AKUSTISCHEM RAUSCHEN ZUR STEUERUNG DER HERSTELLUNG EINES BAUTEILS AUS EINEM FLIESSFÄHIGEN GRUNDMATERIAL

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor), Müller, F. (Inventor), Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor) & Müller, F. (Inventor), 3 Dec 2014, IPC No. G01N 29/ 46 A I, Patent No. EP2807011, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  102. Published

    Acoustic noise sensing for controlling manufacture of a component part made of a flowable base material

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor) & Mueller, F. (Inventor), 12 Nov 2014, IPC No. B29C 45/ 76 A I, Patent No. CN104144778, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  103. Published

    ACOUSTIC NOISE SENSING FOR CONTROLLING MANUFACTURE OF A COMPONENT PART MADE OF A FLOWABLE BASE MATERIAL

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor) & Mueller, F. (Inventor), 8 Oct 2014, IPC No. B29C 45/ 76 A I, Patent No. KR20140119154, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  104. Published

    Influence of the process parameters on the replication of microstructured freeform surfaces

    Burgsteiner, M., Müller, F., Lucyshyn, T., Kukla, C. & Holzer, C., 2014, AIP Conference Proceedings: PROCEEDINGS OF PPS-29: The 29th International Conference of the Polymer Processing Society - Conference Papers. Nuremberg, Germany, Vol. 1593. p. 183-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  105. Published

    Investigation of the Influence of Different Coatings on the Filling Behavior and Replication Quality of Microstructures in Injection Molding

    Burgsteiner, M., Müller, F., Lucyshyn, T., Kukla, C., Holzer, C., Gruber, D. P., Macher, J. & Pacher, G., 2014, Proceedings of PPS 30. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  106. Published

    Modelling of Rheological Behaviour of 316L Feedstocks with Different Powder Loadings and Binder Compositions

    Kukla, C., Duretek, I. & Holzer, C., 2014, Proceedings of the EuroPM2014 Conference. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  107. Published

    Wireless in-mold melt front detection for injection molding: A long-term evaluation

    Müller, F., Kukla, C., Lucyshyn, T., Harker, M., Rath, G. & Holzer, C., 2014, In: Journal of Applied Polymer Science. 131, p. 5628-5638

    Research output: Contribution to journal › Article › Research › peer-review

  108. Published

    Wireless Melt Front Detection for Injection Moulding

    Müller, F., Kukla, C., Lucyshyn, T., Burgsteiner, M. & Holzer, C., 2014, ICIT & MPT 2014 Conference Proceedings . p. 153-159

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  109. 2013
  110. Published

    Acoustic sensing in plastics moulding process

    Rath, G. (Inventor), Kukla, C. (Inventor), Lucyshyn, T. (Inventor) & Müller, F. (Inventor), 24 Jul 2013, IPC No. B29C 45/ 76 A I, Patent No. GB2498586, Priority date 23 Jan 2012, Priority No. GB20120001067

    Research output: Patent

  111. Published

    ACTIVATION PRESSURE INVESTIGATION FOR A PURELY MECHANICAL WIRELESS IN-MOLD SENSOR

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2013, Proceedings of the Polymer Processing Society 29th Annual Meeting ~ PPS-29. p. XXX-XXX

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  112. Published

    ACTIVATION PRESSURE INVESTIGATION FOR A PURELY MECHANICAL WIRELESS IN-MOLD SENSOR

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  113. Published

    Adhesion tendency of polymers to hard coatings

    Rebelo De Figueiredo, M., Bergmann, C., Ganser, C., Teichert, C., Kukla, C. & Mitterer, C., 2013, In: International polymer processing. 28, 4, p. 415-420 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 Next
View graph of relations

Latest Research Output

View more (119)