Christian Bernhard

101 - 200 out of 290Page size: 100

Research output

  1. 2018
  2. Published

    Kornfeinung ausscheidungsverfestigter Hochtemperaturferrite mittels Ce-haltiger Einschlüsse

    Godor, F. R., Mayerhofer, A., Presoly, P., Clemens, H., Mayer, S. & Bernhard, C., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 319-324

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. 2017
  4. Published

    Experimental Investigations on Spray Characteristics of Water-Air Nozzles

    Preuler, L., Bernhard, C., Ilie, S. & Six, J., 21 Dec 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 163.2018, 1, p. 29-36 8 p.

    Research output: Contribution to journal › Article › Research

  5. Published

    Modeling Inclusion Formation during Solidification of Steel: A Review

    You, D., Michelic, S. K., Presoly, P., Liu, J. & Bernhard, C., 17 Oct 2017, In: Metals : open access journal . 7.2017, 11, 1 p., 460.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Charakterisierung von azikularferritischen Phasenanteilen in HSLA- Stählen und deren Auswirkung auf die mechanischen Kennwerte bei Kleinstproben

    Mayerhofer, A., Bernhard, C. & Michelic, S. K., 13 Sept 2017, p. 125. 130 p.

    Research output: Contribution to conference › Paper › peer-review

  7. Published

    Experimental Study on the Behavior of TiN and Ti2O3 Inclusions in Contact with CaO-Al2O3-SiO2-MgO Slags

    Michelic, S. K. & Bernhard, C., 8 Aug 2017, In: Scanning. 2017, 15 p., 2326750.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Further development and validation of IDS by means of selected experiments

    Presoly, P., Bernhard, C., Fuchs, N., Miettinen, J., Louhenkilpi, S. & Laine, J., 27 Jun 2017, Proceedings of 9th ECCC European Continuous Casting Conference - ECCC2017. Vienna: ASMET

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    The potential for grain refinement of a super austenitic stainless steel with a cerium grain refiner

    Baumgartner, K., Bernhard, C., Presoly, P., Hafok, M. & Leitner, H., 25 May 2017, ESSC and DUPLEX 2017 - 9th European Stainless Steel Conference - Science and Market and 5th European Duplex Stainless Steel Conference and Exhibition. Associazione Italiana di Metallurgia, Vol. 2017-May.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    A New Experimental Setup for the Simulation of Surface Crack Formation in the Continuous Casting Process

    Krobath, R. & Bernhard, C., 8 May 2017, p. 1827 - 1837. 11 p.

    Research output: Contribution to conference › Paper › peer-review

  11. Published

    On the Capability of Nonmetallic Inclusions to Act as Nuclei for Acicular Ferrite in Different Steel Grades

    Loder, D., Michelic, S. K., Mayerhofer, A. & Bernhard, C., 4 May 2017, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 48.2017, 4, p. 1992-2006 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    A new method for the experimental simulation of surface crack formation in continuous casting

    Krobath, R., Bernhard, C., Ilie, S., Six, J. & Hahn, S., Apr 2017, In: Metallurgia Italiana. 109.2017, 4, p. 5-13 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Influence of Silicon and Manganese on the Peritectic Range for Steel Alloys

    Presoly, P. & Bernhard, C., Apr 2017, In: Iron and Steel Technology. 14.2017, 4, p. 100-108 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Modeling of manganese sulfide formation during the solidification of steel

    You, D., Michelic, S. K., Wieser, G. & Bernhard, C., Feb 2017, In: Journal of materials science. 52.2017, 3, p. 1797-1812 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Influence of operation parameters on the cooling performance of water-air nozzles

    Preuler, L., Bernhard, C., Ilie, S. & Six, J., 1 Jan 2017, METAL 2017 - 26th International Conference on Metallurgy and Materials, Conference Proceedings. Vol. 2017-January. p. 45-51 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Acicular Ferrite Formation and Its Influencing Factors - A Review

    Loder, D., Michelic, S. K. & Bernhard, C., Jan 2017, In: Journal of Materials Science Research. 6.2017, 1, p. 24-43 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Kinetic model on manganese sulfide formation during solidification of steel

    You, D., Michelic, S. K., Presoly, P. & Bernhard, C., 2017, 6th Decennial International Conference on Solidification Processing (SP17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    On the Relevance of Microsegregation Models for Process Control in Continuous Casting of Steel

    Bernhard, M. C., Presoly, P., Bernhard, C., Six, J. & Ilie, S., 2017, Conference Proceedings of the 26th Anniversary International Conference on Metallurgy and Materials - Metal 2017. Brno, Czech Republic

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Study of Clogging Deposit Buildup in Al-killed and Ca-Treated High-Sulfur Steels With Focus on the Steel/Refractory Interface

    Dorrer, P., Michelic, S., Klösch, G., Reiter, J., Paul, A. & Bernhard, C., 2017, AISTech 2017 Proceedings. p. 1555 - 1565

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Untersuchungen des Ausscheidungsverhaltens von H-Karbiden in einer kohlenstoffhaltigen TiAl Legierung mittels in- und ex-situ Experimenten

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 2017, Praktische Metallographie Sonderband 51. p. 55-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. 2016
  22. Published

    A new method for the experimental simulation of surface crack formation in continuous casting

    Krobath, R., Bernhard, C., Ilie, S., Six, J. & Hahn, S., 1 Dec 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  23. Published

    HT-LSCM - A valuable tool for surface microstructure investigations

    Fuchs, N., Krobath, R., Bernhard, C., Ilie, S. & Xia, G., 1 Dec 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  24. Published

    In-situ Beobachtung des Verhaltens nichtmetallischer Einschlüsse mittels Hochtemperatur- Laser-Scanning- Konfokalmikroskopie

    Michelic, S. K., Dieguez Salgado, U., Loder, D. & Bernhard, C., Sept 2016, In: Giesserei-Praxis. 67.2016, 9, p. 337-340 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Experimental und numerical investigations on cooling efficiency of Air-Mist nozzles on steel during continuous casting

    Arth, G., Taferner, M., Bernhard, C. & Michelic, S. C., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143.2016, 1, 9 p., 012033.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Formation of shrinkage porosity during solidification of steel: Numerical simulation and experimental validation

    Riedler, M., Michelic, S. K. & Bernhard, C., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143.2016, 1, 9 p., 012035.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    On the importance of thermodynamic investigations for the re-assessment of selected ternary Fe-base systems

    Presoly, P. & Bernhard, C., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012034.

    Research output: Contribution to journal › Conference article › peer-review

  28. Published

    Microsegregation Model with Local Equilibrium Partition Coefficients During Solidification of Steels

    You, D., Bernhard, C., Wieser, G. & Michelic, S., Jul 2016, In: Steel research international. 87.2016, 7, p. 840-849 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Systematische Untersuchung der Azikularferritbildung in Stählen

    Loder, D., Michelic, S. K. & Bernhard, C., 28 Jun 2016, In: Berg- und hüttenmännische Monatshefte : BHM. 161.2016, 7, p. 315-320 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Near net shape casting - current status and future perspectives

    Bernhard, C., 22 Jun 2016.

    Research output: Contribution to conference › Presentation › Transfer

  31. Published

    A transient 2D solidification model for defect prevention in the continuous casting process

    Bernhard, C., 25 May 2016.

    Research output: Contribution to conference › Presentation › Research

  32. Published

    Influence of Silicon and Manganese on the Peritectic Range for Steel Alloys

    Presoly, P. & Bernhard, C., 16 May 2016, Proceedings AISTech 2016. Pittsburgh, USA, p. 2497-2506 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Research on continuous casting at University of Leoben - An overview

    Bernhard, C., 11 May 2016.

    Research output: Contribution to conference › Presentation › Transfer

  34. Published

    Charakterisierung der Erstarrungsmechanismen beim Vergießen großer Blöcke mit einem neuen Gießverfahren

    Riedler, M., Michelic, S. & Bernhard, C., 10 May 2016.

    Research output: Contribution to conference › Poster › Research

  35. Published

    Thermodynamic optimization of individual steel database by means of systematic DSC measurements according the CALPHAD approach

    Presoly, P., Six, J. & Bernhard, C., 14 Apr 2016, In: IOP Conference Series: Materials Science and Engineering. 119, 1, 012013.

    Research output: Contribution to journal › Conference article › peer-review

  36. Published

    Study on Oxide Inclusion Dissolution in Secondary Steelmaking Slags using High Temperature Confocal Scanning Laser Microscopy

    Michelic, S. K., Goriupp, J., Feichtinger, S., Kang, Y.-B., Bernhard, C. & Schenk, J., Jan 2016, In: Steel research international. 87.2016, 1, p. 57-67 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Formation of shrinkage porosity during solidification of steel: Numerical simulation and experimental validation

    Riedler, M., Michelic, S. & Bernhard, C., 2016, In: IOP Conference Series: Materials Science and Engineering. 143.2016, 1, 8 p., 012035.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    In-situ observation of the behaviour of non-metallic inclusions at different interfaces in the system steel-slag-refractory

    Michelic, S., Salgado, U. D. & Bernhard, C., 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, p. 012010 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Investigation of metallurgical phenomena related to process and product development by means of High Temperature Confocal Scanning Laser Microscopy

    Diéguez-Salgado, U., Michelic, S. & Bernhard, C., 2016, In: IOP Conference Series: Materials Science and Engineering. 119, 1, 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Investigation of the influence of the chemical composition of HSLA steel grades on the microstructure homogeneity during hot rolling in continuous rolling mills using a fast layer model

    Schmidtchen, M., Rimnac, A., Warczok, P., Kozeschnnik, E., Bernhard, C., Bragin, S., Kawalla, R. & Linzer, B., 2016, In: IOP Conference Series: Materials Science and Engineering. 119, 1, p. 12001 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Modeling of inclusion formation during the solidification of steel

    You, D., Michelic, S. K., Bernhard, C., Loder, D. & Wieser, G., 2016, In: ISIJ international. 56, 10, p. 1770-1778 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Numerical simulation and experimental validation of the formation of shrinkage cavity during solidification of steel

    Riedler, M., Michelic, S. & Bernhard, C., 2016, Conference Proceedings to the 25th Anniversary International Conference on Metallurgy and Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    On the modelling of microsegregation in steels involving thermodynamic databases

    You, D., Bernhard, C., Michelic, S., Wieser, G. & Presoly, P., 2016, IOP Conference Series: Materials Science and Engineering. Vol. 119. p. 012027 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. 2015
  45. Published

    Thermodynamic optimization of individual steel databases by means of systematic DSC measurement

    Presoly, P., Six, J. & Bernhard, C., 3 Nov 2015, International Conference on Materials, Processing and Product Engineering. Leoben, 8 p. 29

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Untersuchung des Auflöseverhaltens oxidischer Einschlüsse in CaO-Al2O3-SiO2-MgO Schlacken mittels Hochtemperatur-Laser-Scanning Konfokalmikroskopie

    Michelic, S., Goriupp, J., Feichtinger, S., Kang, Y.-B., Bernhard, C. & Schenk, J., 2 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  47. Published

    Contribution of the Chair of Ferrous Metallurgy at the Montanuniversitaet Leoben to Enhance the Sustainability of Steel Production and Application

    Schenk, J., Bernhard, C. & Michelic, S., Oct 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 10, p. 489-494

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    A numerical solidification model as link between laboratory experiments and the continuous casting process

    Riedler, M., Arth, G., Bernhard, C., Presoly, P., You, D. & Ilie, S., 24 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  49. Published

    Formation of shrinkage porosity during solidification of steel: Numerical simulation and experimental validation

    Riedler, M., Michelic, S. & Bernhard, C., 23 Sept 2015, Proceedings of the 2015 International Symposium on Liquid Metal Processing and Casting.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    In-situ observation of the behavior of non-metallic inclusions at different interfaces in the system steel-slag-refractory

    Michelic, S., Dieguez Salgado, U. & Bernhard, C., 21 Sept 2015, LMPC 2015: Proceedings of the 2015 International Symposium on Liquid Metal Processing and Casting. p. 143-152 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    On the importance of thermodynamic investigations for the re-assessment of selected ternary Fe-base systems

    Presoly, P. & Bernhard, C., 20 Sept 2015, Proceedings of the 2015 International Symposium on Liquid Metal Processing and Casting. Leoben, Vol. 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Analysis of Solidification of High Manganese Steels Using Improved Differential Thermal Analysis Method

    Zhuang, C., Liu, J., Bernhard, C. & Presoly, P., 1 Aug 2015, In: Journal of iron and steel research international. 22, 8, p. 709-714 6 p., 8.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Untersuchung der Wirkung von Legierungselementen auf die peritektische Phasenumwandlung in Stählen

    Presoly, P. & Bernhard, C., Jul 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 07, p. 337-341 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Experimental und numerical investigations on cooling efficiency in the secondary cooling zone during continuous casting of steel

    Arth, G., Taferner, M. & Bernhard, C., 16 Jun 2015. 7 p.

    Research output: Contribution to conference › Paper

  55. Published

    In-situ Observation of Austenite Grain Growth in Plain Carbon Steels by Means of High-Temperature Laser Scanning Confocal Microscopy

    Fuchs, N., Krajewski, P. & Bernhard, C., May 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 05, p. 214-220 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    A novel Approach for the Simulation of Surface Crack Formation in Continuous Casting

    Krajewski, P., Krobath, R., Bernhard, C., Miettinen, J., Louhenkilpi, S., Ilie, S. & Schaden, T., Mar 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 3, p. 109-116 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Experimental und Numerical Investigations on Hot Tearing during Continuous Casting

    Arth, G., Ilie, S., Pierer, R. & Bernhard, C., Mar 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 3, p. 103-108 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Characterization of TiN, TiC and Ti(C,N) in titanium-alloyed ferritic chromium steels focusing on the significance of different particle morphologies

    Michelic, S., Loder, D., Reip, T., Ardehali Barani, A. & Bernhard, C., 2015, In: Materials characterization. 100, p. 61-67

    Research output: Contribution to journal › Article › Research › peer-review

  59. 2014
  60. Published

    Effect of nucleation undercooling on the kinetics and mechanism of the peritectic phase transition in steel

    Griesser, S., Bernhard, C. & Dippenaar, R., 1 Jan 2014, In: Acta Materialia. 81, p. 111-120 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    In-situ quantification of micro-segregation that occurs during the solidification of steel

    Griesser, S., Reid, M., Pierer, R., Bernhard, C. & Dippenaar, R., 1 Jan 2014, In: Steel research international. 85, 8, p. 1257-1265 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Mechanism of the peritectic phase transition in Fe-C and Fe-Ni alloys under conditions close to chemical and thermal equilibrium

    Griesser, S., Bernhard, C. & Dippenaar, R., 1 Jan 2014, In: ISIJ international. 54, 2, p. 466-473 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    A novel approach for the simulation of surface crack formation in continuous casting

    Krajewski, P., Krobath, R., Bernhard, C., Miettinen, J., Louhenkilpi, S., Ilie, S. & Schaden, T., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. p. x-y

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    A novel approach for the simulation of surface crack formation in continuous casting

    Krajewski, P., Krobath, R., Bernhard, C., Miettinen, J., Louhenkilpi, S., Ilie, S. & Schaden, T., 2014, Proceedings of the 8th European Continuous Casting Conference. p. x-y

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Ätzmethoden für die computergestützte Analyse von Azikularferrit im Gefüge

    Otto, C., Loder, D., Michelic, S. & Bernhard, C., 2014.

    Research output: Contribution to conference › Poster › Research

  66. Published

    Austenite Grain Growth and the Surface Quality of Continuously Cast Steel

    Dippenaar, R., Bernhard, C., Schider, S. & Wieser, G., 2014, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 45B, p. 409-418

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Characterization of acicular ferrite microstructures using etching methods, optical microscopy and HT-LSCM

    Loder, D., Michelic, S. & Bernhard, C., 2014, Sonderbände der praktischen Metallographie - Fortschritte in der Metallographie. p. 125-130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Continuous Casting of Hypo-peritectic Steels: Mould Thermal Monitoring and DSC-analysis

    Presoly, P., Xia, G., Reisinger, P. & Bernhard, C., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 430-437

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Diffusional constrained crystal nucleation during peritectic phase transitions

    Griesser, S., Reid, M., Bernhard, C. & Dippenaar, R., 2014, In: Acta materialia. 67, p. 335-341

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Entwicklung von Stahl-Keramik-Verbunden mit verminderter Dichte

    Arth, G., Bernhard, C., Samek, L. & Samoilov, A., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 291-293

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Entwicklung von Stahl-Keramik-Verbunden mit verminderter Dichte

    Arth, G., Bernhard, C., Samek, L. & Samoilov, A., 2014, Forum für Metallurgie und Werkstofftechnik 2014 mit Zukunftskonferenz. p. xx-xx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Experimental study on the formation of non-metallic inclusions acting as nuclei for acicular ferrite in HSLA steels through specific deoxidation practice and defined cooling conditions

    Michelic, S., Loder, D., Arth, G. & Bernhard, C., 2014, Materials Science Forum: Proceedings THERMEC 2013. Vol. 783-786. p. 1079-1084

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Experimental und numerical investigations on hot tearing during continuous casting of steel

    Arth, G., Bernhard, C., Ilie, S., Schaden, T. & Pierer, R., 2014, Conference Proceedings of the 8th ECCC. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Experimentelle Simulation der Oberflächenrissbildung beim Stranggießprozess mit Hilfe des IMC-B Versuchs

    Krajewski, P., Bernhard, C., Krobath, R., Schaden, T. & Ilie, S., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 304-305

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Identification of peritectic steel grades by thermal mould monitoring and DSC measurements

    Presoly, P., Bernhard, C. & Xia, G., 2014, Proceedings of the 8th European Continuous Casting Conference. p. x-y

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    IMC-B - a new experimental method to predict the crack susceptiblity under continuous casting conditions

    Krajewski, P., Bernhard, C., Krobath, R., Schaden, T. & Ilie, S., 2014, 1st ESTAD &31st JSI. p. 184-185

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Influence of thin slab thickness on final strip property in Arvedi ESP plant

    Linzer, B., Watzinger, J., Bragin, S., Bernhard, C. & Bianchi, A., 2014, 8th European Continuous Casting Conference. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    In situ observation of acicular ferrite formation using HT-LSCM: possibilities, challenges and influencing factors

    Loder, D., Michelic, S., Mayerhofer, A., Bernhard, C. & Dippenaar, R., 2014, Proceedings of MS&T14 . p. 469-476

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    In-situ observation of the dissolution of SiO2 particles in CaO-Al2O3-SiO2 slags and mathematical analysis of its dissolution pattern

    Feichtinger, S., Michelic, S., Kang, Y.-B. & Bernhard, C., 2014, In: Journal of the American Chemical Society. 97, p. 316-325

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    The Use of HT-LSCM for the In Situ Observation of Acicular Ferrite

    Loder, D., Michelic, S. & Bernhard, C., 2014.

    Research output: Contribution to conference › Poster › Research

  81. 2013
  82. Published

    ARVEDI ESP PROCESS – AN ULTIMATE TECHNOLOGY CONNECTING CASTING AND ROLLING IN ENDLESS MODE

    Bragin, S., Rimnac, A., Linzer, B., Bianchi, A., Mantova, A., Rizzi, A. & Bernhard, C., 2013, Rolling 2013. p. 1-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Comprehensive Investigations of new Filler Materials for Welding of High Strength Steels

    Schnitzer, R., Rauch, R., Ernst, W., Wagner, J., Baumgartner, S., Leitner, M., Stoschka, M., Schlagradl, T., Schneider, R. & Bernhard, C., 2013, Proceedings of the 3rd International Conference. p. 323-332

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Effect of titanium on the solidification and postsolidification microstructure of high-strength steel welds

    Vanovsek, W., Bernhard, C., Fiedler, M. & Schnitzer, R., 2013, In: Welding in the world. 57, p. 665-674

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Etching Methods for the Computerized Analysis of Acicular Ferrite in Steel Microstructures

    Loder, D., Michelic, S. & Bernhard, C., 2013.

    Research output: Contribution to conference › Poster › Research

  86. Published

    Identification of Defect Prone Peritectic Steel Grades by Analyzing High-Temperature Phase Transformations

    Presoly, P., Bernhard, C. & Pierer, R., 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, p. 5377-5388

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    IMC-B – Ein neuer Ansatz zur Untersuchung der Oberflächenheissrissbildung im Stranggießprozess

    Krajewski, P., Bernhard, C., Krobath, R., Schaden, T. & Ilie, S., 2013, In: Berg- und hüttenmännische Monatshefte : BHM.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    IMC-B – ein neuer Ansatz zur Untersuchung der Oberflächenrissbildung im Stranggießprozess

    Krajewski, P., Bernhard, C., Pierer, R., Schneller, F. & Schaden, T., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 108-115

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Inclusion Removal and Modification in Remelting Processes with Special Regard to Inclusion Dissolution in CaO-Al2O3-CaF2 Slags

    Michelic, S., Schider, S. & Bernhard, C., 2013,

    INTECO Melting, Refining, Casting & Remelting Symposium 2013 - Proceedings

    .     p. 172-184

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Influence of aluminium content on the characterization of microstructure and inclusions in high-strength steel welds

    Vanovsek, W., Bernhard, C., Fiedler, M. S. & Posch, G., 2013, In: Welding in the world. 57, p. 73-83

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Influence of aluminum content on the characterization of microstructure and inclusions in high-strength steel welds

    Vanovsek, W., Bernhard, C., Fiedler, M. & Posch, G., 2013, In: Welding in the world. 57, p. 73-83

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    In-situ Beobachtung von Phasenumandlungen in Stählen

    Schider, S., Gamsjäger, E., Michelic, S. & Bernhard, C., 2013, Prakt. Met. Sonderband 45. p. 139-144

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Systematische Optimierung von Stahleigenschaften durch nichtmetallische Einschlüsse

    Loder, D., Michelic, S. & Bernhard, C., 2013.

    Research output: Contribution to conference › Poster › Research

  94. 2012
  95. Published

    Investigation of alumina wetting by Fe-Ti, Fe-P and Fe-Ti-P alloys

    Karasangabo, A. & Bernhard, C., 1 May 2012, In: Journal of adhesion science and technology. 26, 8-9, p. 1141-1156 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    A modified cellular automaton method for polydimensional modelling of dendritic growth and microsegregation in multicomponent alloys

    Michelic, S., Thuswaldner, J. & Bernhard, C., 2012, IOP Conf. Series: Materials Science and Engineering. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Anwendungsbeispiele für die Verwendung neuer analytischer Prüftechniken bei Hochleistungsstählen

    Werl, R., Klösch, G., Winkler, W., Pissenberger, A., Egger, M., Aigner, S., Pühringer, J., Michelic, S., Bernhard, C., Schützenhöfer, W., Schneider, R. & Schüller, C., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. 157, p. 194-203

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Austenite grain growth and the surface quality of continuously cast steel

    Dippenaar, R., Bernhard, C., Schider, S. & Wieser, G., 2012, 15th International Conference on Advances in Materials Processing Technologies. p. ID-10318

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. Published

    Charakterisierung von nichtmetallischen Einschlüssen in Titan legierten ferritischen Chromstählen

    Loder, D., Michelic, S., Reip, T. & Bernhard, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  100. Published

    Critical evaluation of prospects and limitations of steel cleanness characterisation using automated SEM/EDS analysis

    Michelic, S., Bernhard, C., Wieser, G. & Lederhaas, B., 2012, Proceedings of the 8th International Conference on Clean Steel. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Determination of Decisive Factors Influencing the Inclusion Landscape in Electroslag Remelted Ingots

    Michelic, S., Tanzer, R., Schützenhöfer, W. & Bernhard, C., 2012, Proceedings of the 1st International Conference on Ingot Casting, Rolling and Forging. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Effect of titanium on the solidification and post-solidification microstructure of high-strength steel welds: IIW Doc. II-C-435-11

    Vanovsek, W., Bernhard, C., Fiedler, M. & Schnitzer, R., 2012

    Research output: Non-textual form › Web publication/site › Research

  103. Published

    Experimental investigation into the influence of Ti on the clogging of ULC steels in continuous casting

    Bernhard, C., Xia, G., Egger, M., Pissenberger, A. & Michelic, S., 2012, Proceedings of the AISTech 2012. p. 2191-2200

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  104. Published

    Experimental investigations into surface crack formation under continuous casting conditions

    Krajewski, P., Pierer, R., Bernhard, C., Schaden, T. & Ilie, S., 2012, 5th International Congress on the Science and Technology of Steelmaking. p. Paper-1332

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  105. Published

    Experimental study on the influence of the Ti/Al ratio and different addition practices on the inclusion landscape in ULC steels

    Michelic, S., Xia, G. & Bernhard, C., 2012, Proceedings of the ASIA Steel International Conference 2012. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  106. Published

    Identification of defect prone peritectic steel grades by analyzing the high temperature phase transformations

    Presoly, P., Pierer, R. & Bernhard, C., 2012, Defects and Properties of Cast Metals - Solidification Structure and Segregation. p. 299-306

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  107. Published

    In-situ quantification of micro-segregation that occurs during the solidification of steel

    Griesser, S., Reid, M., Pierer, R., Bernhard, C. & Dippenaar, R., 2012, 5th International Conference on the Science and Technology of Steelmaking. p. Paper-1143

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 Next
View graph of relations

Contact

Phone: 2220

Latest Research Output

View more (290)