Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

3601 - 3650 out of 4,193Page size: 50

Research output

  1. 2007
  2. Published

    Bestimmung von GIC-Werten in Anlehnung an pr DIN EN 6033

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  3. Published

    Bestimmung von GIC-Werten nach DIN EN 6033 - Part A

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  4. Published

    Bestimmung von ILSS-Werten nach DIN EN ISO 14130

    Wolfahrt, M., Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  5. Published

    Calculation of the pressure and the temperature development in the solid conveying zone of grooved extruders

    Schuschnigg, S. & Langecker, G., 2007, PPS-23 Program and Book of Abstracts. p. 74-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Calculation of the pressure and the temperature development in the solid conveying zone of grooved extruders: PPS-23 The Polymer Processing Society 23rd Annual Meeting

    Langecker, G. & Schuschnigg, S., 2007

    Research output: Non-textual form › Web publication/site › Research

  7. Published

    Characterisation and simulation of the time dependent deformation behaviour of polymer roller

    Berer, M. & Major, Z., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  8. Published

    Characterisation, modelling and simulation of the impact behavior of foams

    Reiter, M., Knotz, C. & Major, Z., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  9. Published

    Characterisation of the fatigue behavior of elastomer composites

    Kajtna, A., Vezer, S. & Major, Z., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  10. Published

    Characterisation of the fatigue behavior of rubber by combined Wöhler on isocyclic analysis

    Vezer, S. & Major, Z., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  11. Published

    Characterisation of the fatigue failure behavior of elastomer composites

    Kajtna, A., Vezer, S. & Major, Z., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  12. Published

    Characterisation of the fracture behavior of elastomeres under complex loading conditions

    Major, Z., Lederer, K. & Lang, R., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 223-224

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Characterisation of the friction behavior of table tennis rubbers

    Major, Z. & Lang, R., 2007, International Table Tennis Federation. p. 123-130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Characterisation of the magnetorheological behavior of fluids and elastomers

    Major, Z. & Filipcsei, G., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    Characterisation of thermo-mechanical behavior of elastomers

    Major, Z., Feichter, C. & Steinberger, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    Characterization of non-nanofilled resins M06n and M10n

    Pilz, G. & Karpf, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  17. Published

    Characterization of the Chemical Resistance of Glass Fibre Reinforced Resins for Pipe Applications

    Aichinger, J., 2007, 150 p.

    Research output: Thesis › Diploma Thesis

  18. Published

    Characterizing Chemically Reactive Thin Layers: The Surface Reaction of 2-(4-Chlorosulfonylphenyl) ethyltrichlorosilane with Ammonia

    Kern, W., Pacher, P., Lex, A., Werzer, O., Temmel, S., Resel, R., Schennach, R., Trimmel, G. & Zojer, E., 2007, In: Journal of physical chemistry C (C, Nanomaterials and interfaces). C 111, p. 12407-12413

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Charakterisierung und Simulation des Verformungsverhaltens von Kunststoffrollen aus POM und PEEK

    Berer, M., 2007

    Research output: Thesis › Diploma Thesis

  20. Published

    Charakterisierung von RTM-Laminaten unter Druckbelastung

    Lintschinger, M. O. M., 2007

    Research output: Thesis › Master's Thesis

  21. Published

    Charakterisierung von Schrumpffolien

    Wallner, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  22. Published

    Charakterisierung von Spritzgieß-Formteiloberflächen

    Berger, G., Friesenbichler, W. & Gruber, D. P., 2007, In: KC-aktuell (Informationen aus dem Kunstoff-Cluster). p. 2-3

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Chemically and Photochemically Reactive Siloxane Layers for Modification of Inorganic Surfaces

    Lex, A., Pacher, P., Temmel, S., Shen, Q., Hlawacek, G., Werzer, O., Track, A. M., Frank, P., Proschek, V., Schennach, R., Koller, G., Ramsey, M. G., Teichert, C., Resel, R., Winkler, A., Zojer, E., Kern, W. & Trimmel, G., 2007, Chemically and Photochemically Reactive Siloxane Layers for Modification of Inorganic Surfaces. Materials Research Society : MRS, p. 231-231

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Chemical sensitivity on patterned organic thin films by FFM

    Shen, Q., Hlawacek, G., Teichert, C., Lex, A., Trimmel, G. & Kern, W., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  25. Published

    Compression tests on sandfilled UP-Resins

    Pilz, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    Cyclic crack growth tests with CRB specimens for the evaluation of the long-term performance of PE pipe grades

    Pinter, G., Haager, M., Balika, W. & Lang, R., 2007, In: Polymer Testing. 26, p. 180-188

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Degradation behavior of polymeric materials for solar thermal applications

    Wallner, G., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    Degradation mechanisms of ethylene-vinyl-acetate copolymer - new studies including ultra fast cure foils

    Bregulla, M., Köhl, M., Lampe, B., Oreski, G., Philipp, D., Wallner, G. & Weiß, K.-A., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    Determination of the molar mass distribution from rheological measurements and size exclusion chromatography: A comparative study

    Kock, C., Schausberger, A., Aust, N. & Gahleitner, M., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Determination of time dependent Poisson's ratio values in monotonic and creep tensile experiments

    Steinberger, R., Jerabek, M., Major, Z. & Lang, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. Published

    Development of a compression tool for polymeric materials

    Jerabek, M., Steinberger, R. & Major, Z., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 471-472

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Druckentwicklung in der Feststoffförderzone

    Schuschnigg, S. & Langecker, G., 2007, In: VLK-News. 3+4, p. 4-10

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    DSC-Analyse eines Spitzenmaterials

    Wallner, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Dynamisch-mechanische Charakterisierung (DMA) von Thermoplasten

    Pilz, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. Published

    Eine neue Professur am Institut für Chemie der Kunststoffe an der Montanuniversität Leoben: Synthese von Spezial- und Funktionspolymeren

    Kern, W., 2007, In: VLK-News. 15, p. 23-27

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Einfluss ausgewählter Katalysatoren auf Verarbeitung und Eigenschaften von Polyurethanelastomerschaumstoffen

    Zeipper, S., 2007

    Research output: Thesis › Diploma Thesis

  37. Published

    Einfluss unterschiedlicher RTM-Harze und Fasertypen auf das mechanische Eigenschaftsprofil von NCF-Composites

    Kitzmüller, W., 2007

    Research output: Thesis › Diploma Thesis

  38. Published

    Eingangskontrolle von gefüllten und ungefüllten B-Stage Epoxidharzsystemen

    Wamen Nana, E. M., 2007

    Research output: Thesis › Diploma Thesis

  39. Published

    Ethyl isocyanate - an electrolyte additive from the large family of isocyanates for PC-based elctrolytes in lithium-ion batteries

    Kern, W. & Winter, M., 2007, In: Journal of power sources. 174, p. 628-631

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Experimental determination of fatigue crack growth behavior and surface strain distribution of 'faint waist pure shear' specimens with different crack tip radii

    Feichter, C., Major, Z. & Lang, R., 2007, In: Rubber chemistry and technology. 79, p. 712-733

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Expertensystem für die Entwicklung spritzgegossener Formteile aus polymeren Werkstoffen

    Fischer, K., 2007, 182 p.

    Research output: Thesis › Doctoral Thesis

  42. Published

    Expertensystem Spritzgießtechnik: Vom Design bis zum qualitätsgeprüften Formteil

    Langecker, G., Fischer, K., Lucyshyn, T., Fertschej, A. & Hirner, M., 2007,

    H.F. Mark Symposium 2007 - Fortschritte auf dem Gebiet der Elastomere & Thermoplastischen Elastomere

    .     p. 1-17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Fast Determination of Reinforcement in Polymer Nanocomposites

    Kracalik, M., Laske, S., Gschweitl, M., Feuchter, M., Maier, G., Pinter, G., Friesenbichler, W. & Langecker, G., 2007, NanoEurope 2007. p. 13-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Feuchtigkeitseinfluss auf die Zugeigenschaften von gepressten E/P-Kraftzellstoff-Faservliesen

    Pilz, G. & Rausch-Schott, O., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  45. Published

    Flatwise Tension Test an Aluminiumkernverbunden

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  46. Published

    Friction force imaging of chemical differences in photosensitive ultrathin layers

    Shen, Q., Hlawacek, G., Teichert, C., Lex, A., Trimmel, G. & Kern, W., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Herstellung und Charakterisierung von hochgefuellten Folien aus thermoplastischem Polyester

    Wratschko, G., 2007, 131 p.

    Research output: Thesis › Diploma Thesis

  48. Published

    Influence of glass bead and talc fillers on the time and temperature dependent tensile behavior of polypropylene compounds

    Jerabek, M., Steinberger, R. & Major, Z., 2007, ATEM 2007. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Influence of nonylphenol-polyglycol-ether environments on the results of the full notch creep test

    Pinter, G., Haager, M. & Lang, R. W., 2007, In: Polymer Testing. p. 700-710

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Influence of the curing degree on modulus, glass transition temperature and fracture energy of two epoxy resins for composites

    Wolfahrt, M., Pilz, G. & Lang, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    Infrared optical properties of polar ethylene copolymer films for transparent insulation and greenhouse applications

    Oreski, G. & Wallner, G., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1...69 70 71 72 73 74 75 76 ...84 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301