Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

1101 - 1200 out of 4,192Page size: 100

Research output

  1. 2019
  2. Published

    Polymeric Phase-Change Materials: Applicability, Functionalization and Long-Term Stability

    Weingrill, H., 2019

    Research output: Thesis › Doctoral Thesis

  3. Published

    Polyols bearing azosulphonate units as novel additives for polyurethane foams

    Galakhova, A., 2019

    Research output: Thesis › Doctoral Thesis

  4. Published

    Polyurethan-Nanocomposite als Werkstoffe zur Schwingungsisolierung

    Ziegler, W., 2019

    Research output: Thesis › Doctoral Thesis

  5. Published

    Prozessführung und -optimierung der chemischen Schaumextrusion von PET und anschließender Verarbeitung im ISBM-Prozess

    Roitner, J., 2019

    Research output: Thesis › Master's Thesis

  6. Published

    Prozessmodell zur Beschreibung des Dosiervorgangs von Kautschukspritzgießmaschinen

    Kerschbaumer, R., 2019

    Research output: Thesis › Doctoral Thesis

  7. Published

    Residual stress measurement study on injection molded Polyoxymethylene specimens

    Schrank, T., 2019

    Research output: Thesis › Master's Thesis

  8. Published

    Schriftenreihe Kunststofftechnik Leoben, Band 9: „28. Leobener Kunststoff-Kolloquium: Simulation in der Kunststofftechnik“

    Schuecker, C. & Fuchs, P. F., 2019, Schriftenreihe Kunststofftechnik Leoben, Band 9: „28. Leobener Kunststoff-Kolloquium: Simulation in der Kunststofftechnik“. Vol. 9. (Schriftenreihe Kunststofftechnik Leoben).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  9. Published

    Self-Healing Approaches for Melamine-Based Surfaces

    Urdl, K., 2019

    Research output: Thesis › Doctoral Thesis

  10. Published

    SRCR - Mit zeiteffizienter Prüfung zur statischen Langzeitabsicherung: Effizientes Prüfkonzept für statisch langzeitbeanspruchte Faserverbundkomponenten im Baubereich

    Pilz, G., 2019, In: Carbon-Composites-Magazin : die Mitgliederzeitschrift des CCeV.

    Research output: Contribution to journal › Article › Research

  11. Published

    Steigerung der Ressourceneffizienz durch intelligente Verpackungen

    Feuchter, M., 2019, In: vju. 2019, p. 18-19 2 p.

    Research output: Contribution to journal › Article › Transfer

  12. Published

    Systematic investigation of tightness of connectors in the automotive industry

    Hubmann, M., 2019

    Research output: Thesis › Master's Thesis

  13. Published

    THE IMPORTANCE OF THE MECHANICAL INTERACTIONS BETWEEN CONSTITUENT MATERIALS FOR CONSTITUTIVE MODELING OF HYPERELASTIC FIBER–REINFORCED COMPOSITES

    Mansouri, M. R., Fuchs, P. F. & Schuecker, C., 2019, Proceedings of ICoNSoM 2019 - International Conference on Nonlinear Solid Mechanics.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Untersuchung der Fließeigenschaften von einem thermoplastischen Elastomer unter praxisnahen Bedingungen

    Maier, C., 2019

    Research output: Thesis › Master's Thesis

  15. Published

    Untersuchung von CFK Proben mit induktiv angeregter Thermografie

    Oswald-Tranta, B., Tuschl, C. & Schledjewski, R., 2019.

    Research output: Contribution to conference › Paper › peer-review

  16. Published

    Weathering stability of polymeric materials developed for PV modules operating in harsh climatic conditions

    Omazic, A., 2019

    Research output: Thesis › Doctoral Thesis

  17. Published

    Zeta Potential Measurments for Surface Characterization: Streaming Potential & Electrophoresis

    Mühlbacher, I., Schlögl, S. & Wiesbrock, F., 2019.

    Research output: Contribution to conference › Poster › Research › peer-review

  18. Published

    Zur Bewertung der Zuverlässigkeit von Verbundbauteilen

    Schuecker, C., 2019, Schriftenreihe Kunststofftechnik Leoben: „28. Leobener Kunststoff-Kolloquium: Simulation in der Kunststofftechnik“. Vol. 9.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. 2018
  20. E-pub ahead of print

    Impact of temperature on the fatigue and crack growth behavior of rubbers

    Schieppati, J., Schrittesser, B., Wondracek, A., Robin, S., Holzner, A. & Pinter, G. G., 31 Dec 2018, (E-pub ahead of print) In: Procedia Structural Integrity. 13.2018, p. 642-647 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. E-pub ahead of print

    Production planning optimisation for composite aerospace manufacturing

    Hueber, C., Fischer, G., Schwingshandl, N. & Schledjewski, R., 20 Dec 2018, (E-pub ahead of print) In: International Journal of Production Research. 57.2019, 18, p. 5857-5873 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Designing formulation variables of extrusion-based manufacturing of carbon black conductive polymer composites for piezoresistive sensing

    Duan, L., Spörk, M., Wieme, T., Cornillie, P., Xia, H., Zhang, J., Cardon, L. & D'hooge, D. R., 13 Dec 2018, In: Composites science and technology. 171.2019, 8 February, p. 78-85 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Vergleichende rheologische Messungen an Proben aus einem ABS-, POM-, PP- und PA6-Compound

    Duretek, I., 12 Dec 2018, 12 p.

    Research output: Book/Report › Commissioned report › Research

  24. Published

    Optimization of fiber prediction model coefficients in injection molding simulation based on micro computed tomography

    Morak, M., Tscharnuter, D., Lucyshyn, T., Hahn, W., Göttlinger, M., Kummer, M., Steinberger, R. & Gross, T., 5 Dec 2018, In: Polymer engineering and science. 59.2019, s2, p. E152-E160 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    An experimental method for characterizing unsaturated 1D flow in tubular braided preforms during bladder-assisted resin transfer molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 1 Dec 2018, In: Polymer Composites. 39.2018, 12, p. 4666-4677 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    An investigation of fretting behavior of thermoplastic polyurethane for mechanical seal application

    Wang, C., Hausberger, A., Berer, M., Pinter, G., Grün, F. & Schwarz, T., 1 Dec 2018, In: Polymer Testing. 72, p. 271-284 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Improving degree of cure in pultrusion process by optimizing die-temperature

    Costa Dias, R. D. C., Santos, L. D. S., Ouzia, H. & Schledjewski, R., 1 Dec 2018, In: Materials Today Communications. 17.2018, December, p. 362-370 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Nanostructured Carbon Fibre-Reinforced Polymer for Tailored Visual Appearance

    Lenzenweger, R., Feuchter, M., Pinter, G. G., Gruber, D. P., McNamara, D. & Brunner, A. J., 26 Nov 2018.

    Research output: Contribution to conference › Poster › Research

  29. Published

    Thiol-Yne Photo-Click Chemistry—Towards Biocompatible and Tough Photopolymers for 3D Printing

    Hartmann, D. G., Oesterreicher, A. (Co-editor) & Grießer, T. (Co-editor), 26 Nov 2018.

    Research output: Contribution to conference › Poster › Research

  30. Published

    Abrasive/Erosive Wear on MMCs in Plastic Molds as a Function of Volumetric Flow Rates and Glass Fiber Distribution

    Blutmager, A., Varga, M., Schmidt, T., Pock, A. & Friesenbichler, W., 22 Nov 2018, In: Polymer engineering and science. 59.2019, S1, p. E302-E311 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Bestimmung der thermischen und rheologischen Stoffdaten für ein Wachs der Type Gemisch 75/25

    Duretek, I., 16 Nov 2018, 10 p.

    Research output: Book/Report › Commissioned report › Research

  32. Published

    A novel hyperbolic slit contraction with constant strain rate for elongational rheology of polymer melts

    Luger, H.-J., Löw-Baselli, B., Neunhäuserer, A., Friesenbichler, W. & Miethlinger, J., 9 Nov 2018, In: Polymer Testing. 73.2019, February, p. 104-114 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Peel strength characterisation on ply/ply interface using wedge and T-peel/pull-type tests

    Satheesh, B., Tonejc, M., Potakowskyj, L., Pletz, M., Fauster, E., Kaynak, B. & Schledjewski, R., 8 Nov 2018, In: Polymers & Polymer Composites (Polymers and polymer composites). 26.2018, 8-9, p. 431-435 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Capillary Flow Behavior of a Rubber Compound

    Mitsoulis, E., Neunhäuserer, A., Stieger, S. & Friesenbichler, W., 7 Nov 2018.

    Research output: Contribution to conference › Abstract › peer-review

  35. Published

    Viscoelastic Material Characterization and Modelling of Industrial Rubber Compounds - K-BKZ Model

    Stieger, S., Kerschbaumer, R. C., Haselmann, M., Berger-Weber, G., Fasching, M., Duretek, I., Schuschnigg, S. & Friesenbichler, W., 7 Nov 2018.

    Research output: Contribution to conference › Abstract › peer-review

  36. Published

    Fatigue Fracture Properties and Morphology of Polyoxymethylene (POM) Plates Produced under Moderate Processing Conditions

    Berer, M., Halb, M., Feuchter, M., Pacher, G. & Pinter, G., 4 Nov 2018, In: International journal of polymer science . 2018, 18 p., 7410925.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Fatigue Fracture Properties and Morphology of Polyoxymethylene (POM) Plates Produced under Moderate Processing Conditions

    Berer, M., Halb, M., Feuchter, M., Pacher, G. A. & Pinter, G. G., 4 Nov 2018, In: International journal of polymer science . 2018, November, 18 p., 7410925.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Furan-functionalised melamine-formaldehyde particles performing Diels-Alder reactions

    Urdl, K., Weiss, S., Karpa, A., Perić, M., Zikulnig-Rusch, E., Brecht, M., Kandelbauer, A., Müller, U. & Kern, W., 1 Nov 2018, In: European polymer journal. 108, p. 225-234 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Additive Fertigung von metallischen und keramischen Produkten mittels Filamentextrusion

    Holzer, C., 23 Oct 2018, p. 72-75. 4 p.

    Research output: Contribution to conference › Paper › peer-review

  40. Published

    Design and fabrication of monolithic catalyst for plasma-catalytic oxidation of toluene

    Huang, L., Zheng, M., Jiang, W., Shi, L., Gonzalez-Gutierrez, J. & Holzer, C., 20 Oct 2018. 1 p.

    Research output: Contribution to conference › Abstract

  41. Published

    Dual-Responsive Polydimethylsiloxane Networks

    Giebler, M., Radl, S. V., Ast, M., Kaiser, S., Griesser, T., Kern, W. & Schlögl, S., 15 Oct 2018, In: Journal of Polymer Science, Part A: Polymer Chemistry. 56, 20, p. 2319-2329 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Uniaxially Oriented Semi-Crystalline PET Films and their Deformation Depending on Tensile Direction

    Fritz-Popovski, G., Feuchter, M. & Maier, G., 11 Oct 2018.

    Research output: Contribution to conference › Poster › Research

  43. Published

    Bestimmung der rheologischen Stoffdaten an fünf verschiedenen thermoplastischen Compounds

    Duretek, I., 10 Oct 2018, 7 p.

    Research output: Book/Report › Commissioned report › Research

  44. Published

    Bestimmung der thermodynamischen und mechanischen Stoffdaten für ein PC-Compound

    Duretek, I., 10 Oct 2018, 18 p.

    Research output: Book/Report › Commissioned report › Research

  45. Published

    Path calculation, technology and opportunities in dry fiber winding: a review

    Sofi, T., Neunkirchen, S. & Schledjewski, R., 10 Oct 2018, In: Advanced Manufacturing: Polymer and Composites Science. 4.2018, 3, p. 57-72 16 p.

    Research output: Contribution to journal › Review article › peer-review

  46. Published

    Investigation on the Thermal Degradation Kinetics of Polypropylene/Organically Modified Montmorillonite Nanocomposites with Different Levels of Compatibilizer

    Vimalathithan, P. K., Barile, C., Casavola, C., Vijayakumar, C. T., Arunachalam, S., Battisti, M. & Friesenbichler, W., 9 Oct 2018, In: Macromolecular materials and engineering. 303.2018, December, 8 p., 1800260.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Rheology of Highly Filled Polymers

    Kukla, C., Duretek, I., Gonzalez-Gutierrez, J. & Holzer, C., 3 Oct 2018, Polymer Rheology. Rivera-Armenta, J. L. & Salazar-Cruz, B. A. (eds.). London, United Kingdom, p. 153- 173 21 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  48. Published

    Influence of different polyol segments on the crystallisation behavior of polyurethane elastomers measured with DSC and DMA experiments

    Ziegler, W., Guttmann, P., Kopeinig, S., Dietrich, M., Amirosanloo, S., Riess, G. & Kern, W., 1 Oct 2018, In: Polymer Testing. 71.2018, October, p. 18-26 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Photo-triggered self-healing of elastomers

    Manhart, J., Kern, W. & Schlögl, S., 1 Oct 2018, In: Kautschuk, Gummi, Kunststoffe : KGK. 71, 9, p. 30-32 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Viskositätsmessungen an drei PVC-Compounds

    Duretek, I., 1 Oct 2018, 18 p.

    Research output: Book/Report › Commissioned report › Research

  51. Published

    Beschichtungen für Formen und Werkzeuge in der Kunststoff verarbeitenden Industrie

    Krempl, N., Kern, W., Bandl, C., Friesenbichler, W. & Gröger, T., Oct 2018, 2 p. 4020 Linz

    Research output: Other contribution › Research

  52. Published

    Potential of Extrusion Based 3D-printed Hardmetal and Cermet Parts

    Kitzmantel, M., Lengauer, W., Duretek, I., Schwarz , V., Kukla, C., Lieberwirth, C., Morrison, V., Wilfinger, T. & Neubauer, E., 30 Sept 2018, p. 938-945. 7 p.

    Research output: Contribution to conference › Paper › peer-review

  53. Published

    Relationship between fatigue and tribological performance of Thermoplastic Polyurethanes (TPU)

    Wang, C., Stiller, T., Hausberger, A., Grün, F., Pinter, G. G. & Schwarz, T., 25 Sept 2018, Proceedings of the 3rd International conference on Polymer Tribology.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Accelerated aging of polyethylene pipe grades in aqueous chlorine dioxide at constant concentration

    Bredács, M., Frank, A., Bastero, A., Stolarz, A. & Pinter, G., 24 Sept 2018, In: Polymer Degradation and Stability. 157.2018, November, p. 80-89 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Mineralogical properties of continental related pelites in the Eastern Alps

    Wegerer, E., Wessely, G. & Aust, N., 24 Sept 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  56. Published

    The consequences of different printing chamber temperatures in extrusion-based additive manufacturing

    Spörk, M., Arbeiter, F., Raguz, I., Traxler, G., Schuschnigg, S., Cardon, L. & Holzer, C., 21 Sept 2018.

    Research output: Contribution to conference › Paper › peer-review

  57. Published

    Influence of filler types onto the viscosity of highly filled polymers.

    Kukla, C., Slemenik Perše, L., Bek, M., Gonzalez-Gutierrez, J. & Holzer, C., 19 Sept 2018, International Conference on Polymers and Moulds Innovations: Conference Proceedings. Pontes, A. (ed.). Guimaraes, Portugal, Vol. 8. 6 p. P120

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Stratigraphic distribution and lithofacial variations of Carboniferous shales

    Wegerer, E., Aust, N. & Rachetti, A., 17 Sept 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  59. Published

    Bestimmung der Stoffdaten an einem PC/ABS-Blend

    Duretek, I., 14 Sept 2018, 11 p.

    Research output: Book/Report › Commissioned report › Research

  60. Published

    Applicability of Polymeric Materials as Phase Change Materials

    Weingrill, H., Resch-Fauster, K. & Zauner, C., 4 Sept 2018, In: Macromolecular materials and engineering. 303.2018, 11, 17 p., 1800355.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    UV-curable Inkjet-Inks for the Printing on Surfaces with Frequent Skin Contact

    Hartmann, D. G., Edler, M. (Co-editor), Oesterreicher, A. (Co-editor) & Grießer, T. (Co-editor), 3 Sept 2018.

    Research output: Contribution to conference › Poster › Research

  62. Published

    Experimental characterization of single ply out-of-plane permeability through gaseous flow

    Fauster, E., Vierkötter, C., Appel, L., Lugo, J., Schijve, W. & Heider, D., Sept 2018, In: Polymer Composites. 39.2018, 9, p. 3247-3258 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten an einem PBT "1"

    Duretek, I., 23 Aug 2018, 16 p.

    Research output: Book/Report › Commissioned report › Research

  64. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten für PA 6.6

    Duretek, I., 23 Aug 2018, 19 p.

    Research output: Book/Report › Commissioned report › Research

  65. Published

    Fracture mechanical characterization of mica-filled epoxy glass composites under monotonic and cyclic loading

    Pothukuchi, H. K. R., Fuchs, P., Pinter, G. & Stelzer, S., 23 Aug 2018, In: Journal of composite materials. 53.2019, 6, p. 741-751 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Numerical assessment of materials used in railway crossings by predicting damage initiation – Validation and application

    Wiedorn, J., Daves, W., Ossberger, U., Ossberger, H. & Pletz, M., 18 Aug 2018, In: Wear. 2018, Volumes 414–415, p. 136-150

    Research output: Contribution to journal › Article › Transfer › peer-review

  67. Published

    Reconstructing Lithofacial Variations and Depositional Processes in Carboniferous Black Shales

    Wegerer, E. & Aust, N., 16 Aug 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  68. Published

    Vergleichende DSC-Untersuchungen von 3 verschiedenen Dichtungsringen

    Duretek, I., 11 Aug 2018, 10 p.

    Research output: Book/Report › Commissioned report › Research

  69. Published

    Compression-Loaded Cracked Cylinder - Stress Intensity Factor Evaluation

    Dlhy, P., Poduska, J., Náhlík, L., Berer, M., Gosch, A., Pinter, G. G. & Hutar, P., 2 Aug 2018, Key Engineering Materials. Vol. 774. p. 331 336 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  70. Published

    Numerical Modelling of Cylindrical Specimen under Mixed-Mode Loading Conditions

    Slavik, O., Hutar, P., Berer, M., Gosch, A., Arbeiter, F., Pinter, G. G. & Nahlik, L., 2 Aug 2018, p. 325. 330 p.

    Research output: Contribution to conference › Paper › peer-review

  71. Published

    Surface characterization of copper substrates modified with carboxyl terminated phosphonic acids

    Nothdurft, P., Feldbacher, S., Jakopic, G., Mühlbacher, I., Pötz, S. & Kern, W., 1 Aug 2018, In: International Journal of Adhesion and Adhesives. 84, p. 143-152 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten an einem PBT "2"

    Duretek, I., 11 Jul 2018, 15 p.

    Research output: Book/Report › Commissioned report › Research

  73. Published

    Bestimmung der rheologischen und thermodynamischen Stoffdaten an einem MIM-Feedstock der Type PM

    Duretek, I., 10 Jul 2018, 16 p.

    Research output: Book/Report › Commissioned report › Research

  74. Published

    Real-time tensor polynomial approximation of crosshatch measured geometric surface data

    Harker, M., O'Leary, P., Plessing, L., Hergan, P. & Fauster, E., 10 Jul 2018, I2MTC 2018 - 2018 IEEE International Instrumentation and Measurement Technology Conference: Discovering New Horizons in Instrumentation and Measurement, Proceedings. Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Determination of the temperature after dosing an industrial rubber compound. A new ultrasonic-based method

    Hutterer, T., Praher, B., Berger-Weber, G. & Friesenbichler, W., 5 Jul 2018. 1 p.

    Research output: Contribution to conference › Poster › Research

  76. Published

    Implementation of veriable amplitude tests in lifetime assecessment so short fibre reinforced polymeres

    Primetzhofer, A., Stadler, G., Pinter, G. & Grun, F., 4 Jul 2018, Proceeding of 7th International conference of composite materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    A study on the Influence of Material Characterization Methods and Models on Rubber Injection Molding Simulation

    Stieger, S., Berger-Weber, G., Friesenbichler, W. & Fasching, M., 3 Jul 2018.

    Research output: Contribution to conference › Abstract › peer-review

  78. Published

    Corrigendum to “Surface chemical functionalization of cellulose nanocrystals by 3-aminopropyltriethoxysilane”[Int. J. Biol. Macromol. 106 (2018) 1288–1296](S0141813017321785)(10.1016/j.ijbiomac.2017.08.136)

    Khanjanzadeh, H., Behrooz, R., Bahramifar, N., Gindl-Altmutter, W., Bacher, M., Edler, M. & Griesser, T., 1 Jul 2018, In: International Journal of Biological Macromolecules. 113, 1 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  79. Published

    Application of vibrating vents to control void content of RTM parts

    Hergan, P., Fauster, E. & Schledjewski, R., Jul 2018, Proceedings of SAMPE Europe Conference 2018. 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Determination of the pvT behavior for one moldable silicone

    Duretek, I., 29 Jun 2018, 8 p.

    Research output: Book/Report › Commissioned report › Research

  81. Published

    Rheological characterization of the four fluoropolymers on the rotational rheometer

    Duretek, I., 29 Jun 2018, 9 p.

    Research output: Book/Report › Commissioned report › Research

  82. Published

    Winding Trajectories for Dry Filament Wound Preforms

    Sofi, T. R. & Schledjewski, R., 28 Jun 2018.

    Research output: Contribution to conference › Paper

  83. E-pub ahead of print

    Numerical simulations of cracked round bar test: Effect of residual stresses and crack asymmetry

    Poduška, J., Hutař, P., Frank, A., Kučera, J., Sadílek, J., Pinter, G. & Náhlík, L., 27 Jun 2018, (E-pub ahead of print) In: Engineering Fracture Mechanics. 203.2018, November, p. 18-31 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Study of notch effect and fibre orientation on fatigue strength of short glass fibre reinforced polyamide

    Stadler, G., Primetzhofer, A., Pinter, G. G. & Grun, F., 27 Jun 2018.

    Research output: Contribution to conference › Presentation › Research

  85. Published

    Natural fibre textile characterization for dual-scale flow prediction

    Blößl, Y. & Schledjewski, R., 25 Jun 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  86. Published

    Inline control of tape width during automated tape placement

    Schledjewski, R., 24 Jun 2018, Proceedings of the 18th European Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. Published

    NATURAL FIBRE TEXTILE CHARACTERIZATION FOR DUAL-SCALE FLOW PREDICTION

    Blößl, Y. & Schledjewski, R., 24 Jun 2018, Proceedings of the 18th European Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Comparison of J-integral methods for the characterization of tough polypropylene grades close to the glass transition temperature

    Gosch, A., Arbeiter, F. J., Berer, M. & Pinter, G., 22 Jun 2018, In: Engineering Fracture Mechanics. 203.2018, November, p. 2-17 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Viskositätsmessungen an einem PA6-Compound

    Duretek, I., 21 Jun 2018, 6 p.

    Research output: Book/Report › Commissioned report › Research

  90. Published

    Image processing and data evaluation algorithms for reproducible optical in-plane permeability characterization by radial flow experiments

    Fauster, E., Berg, D. C., Abliz, D., Grössing, H., Meiners, D., Ziegmann, G. & Schledjewski, R., 17 Jun 2018, In: Journal of composite materials. 53.2019, 1, p. 45-63 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Overheating protection of solar thermal façades with latent heat storages based on paraffin-polymer compounds

    Resch-Fauster, K., Hengstberger, F., Zauner, C. & Holper, S., 15 Jun 2018, In: Energy and Buildings. 169.2018, 15 June, p. 254-259 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Development of a novel bio-based UV-curable epoxy system

    Klein, A., Schlögl, S. (Co-editor), Radl, S. (Co-editor) & Resch-Fauster, K. (Co-editor), 14 Jun 2018.

    Research output: Contribution to conference › Abstract

  93. Published

    Rheology and mechanical properties of fats: Second Edition

    Gonzalez-Gutierrez, J. & Scanlon, M. G., 14 Jun 2018, Structure-Function Analysis of Edible Fats: Second Edition. Marangoni, A. G. (ed.). 2 ed. United Kingdom, p. 119 - 168 50 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  94. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten für einen MIM-Feedstock

    Duretek, I., 13 Jun 2018, 20 p.

    Research output: Book/Report › Commissioned report › Research

  95. Published

    Anisotropic properties of oriented short carbon fibre filled polypropylene parts fabricated by extrusion-based additive manufacturing

    Spoerk, M., Savandaiah, C., Arbeiter, F., Traxler, G., Cardon, L., Holzer, C. & Sapkota, J., 11 Jun 2018, In: Composites Part A: Applied Science and Manufacturing. 113.2018, October, p. 95-104 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Using (VA)RTM with a Rigid Mould to Produce Fibre Metal Laminates with Proven Impact Strength

    Hergan, P., Li, Y., Zaloznik, L., Kaynak, B., Arbeiter, F., Fauster, E. & Schledjewski, R., 11 Jun 2018, In: Journal of Manufacturing and Materials Processing. 2.2018, 2, 12 p., 38.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Oxidized phospholipids are proinflammatory and proatherogenic in hypercholesterolaemic mice

    Que, X., Hung, M.-Y., Yeang, C., Gonen, A., Prohaska, T. A., Sun, X., Diehl, C., Määttä, A., Gaddis, D. E., Bowden, K., Pattison, J., MacDonald, J. G., Ylä-Herttuala, S., Mellon, P. L., Hedrick, C. C., Ley, K., Miller, Y. I., Glass, C. K., Peterson, K. L. & Binder, C. J. & 2 others, Tsimikas, S. & Witztum, J. L., 6 Jun 2018, In: Nature. 558.2018, 7709, p. 301-306 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Characterization of Surface and Structure of In Situ Doped Sol-Gel-Derived Silicon Carbide

    Kettner, O., Šimić, S., Kunert, B., Schennach, R., Resel, R., Grießer, T. & Friedel, B., 1 Jun 2018, In: Advanced engineering materials. 20, 6, 1701067.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Analysis of the spontaneous, capillary driven wetting behaviour in reinforcing textile structure

    Blößl, Y. & Schledjewski, R., 30 May 2018, PROCEEDINGS OF THE 14TH INTERNATIONAL CONFERENCE ON FLOW PROCESSING IN COMPOSITE MATERIALS.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Facile and Low-Cost Route for Sensitive Stretchable Sensors by Controlling Kinetic and Thermodynamic Conductive Network Regulating Strategies

    Duan, L., D'hooge, D. R., Spörk, M., Cornillie, P. & Cardon, L., 29 May 2018, In: ACS Applied Materials & Interfaces. 10.2018, 26, p. 22678-22691 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Bestimmung der thermodynamischen und mechanischen Stoffdaten für ein PA6-Compound

    Duretek, I., 28 May 2018, 15 p.

    Research output: Book/Report › Commissioned report › Research

  102. Published

    Viskositätsmessungen an 8 Versuchsmustern aus Polypropylen

    Duretek, I., 25 May 2018, 8 p.

    Research output: Book/Report › Commissioned report › Research

Previous 1...8 9 10 11 12 13 14 15 ...42 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301