Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

501 - 550 out of 4,192Page size: 50

Research output

  1. 2022
  2. Published

    Modeling Stiffness Degradation of Fiber-Reinforced Polymers Based on Crack Densities Observed in Off-Axis Plies

    Drvoderic, M., Pletz, M. & Schuecker, C., Jan 2022, In: Journal of composites science. 6.2022, 1, 15 p., 6010010.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    A “close-then-heal” approach based on shape memory effect to improve the healing efficiency of thiolacrylate dynamic networks

    Alabiso, W., Hron, T., Reisinger, D., Bautista-Anguís, D. & Schlögl, S., 2022.

    Research output: Contribution to conference › Poster › Research

  4. Published

    Addressing the challenges in frontal curing of high-performance carbon fiber reinforced composites

    Malik, M. S., Grasser, V., Wolfahrt, M., Schlögl, S. & Pinter, G. G., 2022, Proceedings of the 20th European Conference on Composite Materials - Composites Meet Sustainability. Vol. Vol. 1 - 6. p. 587 593 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Advancing photocurable resin formulations for dual-wavelength digital light processing 3D printing

    Sebalj, N., Cazin, I., Schlögl, S., Berer, M., Sangermano, M. & Fleisch, M., 2022.

    Research output: Contribution to conference › Poster › Research

  6. Published

    Anti-adhesive coating with visibility-on-demand properties for quality control

    Bandl, C., Müller, M., Kern, W. & Krempl, N., 2022.

    Research output: Contribution to conference › Poster › Research

  7. Published

    A photolatent organophosphate for the local activation of dynamic exchange reactions in 3D printed photopolymers

    Dertnig, C. A., Guedes de la Cruz, G. D. C., Neshchadin, D., Schlögl, S. & Grießer, T., 2022.

    Research output: Contribution to conference › Poster › Research

  8. Published

    A Simulation-Based Assessment of Print Accuracy for Microelectronic Parts Manufactured with DLP 3D Printing Process

    Thalhamer, A., Fuchs, P., Strohmeier, L., Hasil, S. & Wolfberger, A., 2022, 2022 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2022. Institute of Electrical and Electronics Engineers, (2022 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2022).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    A systematic investigation of fracture in polyamide 12

    Messiha, M., 2022

    Research output: Thesis › Doctoral Thesis

  10. Published

    Bio-based epoxy resin for flexible and biodegradable bio-composites

    Schwaiger, M., Feuchter, M. & Resch-Fauster, K., 2022, Biopol-2022: Conference Proceedings. p. 43 188 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Chalcone [2+2] cycloaddition for λ-orthogonal dual-cure photopolymers

    Müller, S. M., Nelson, B., Schlögl, S. & Grießer, T., 2022.

    Research output: Contribution to conference › Poster › Research

  12. Published

    Challenges in the use of highly birefringent fiber bragg gratings for strain sensing in composites

    Wachtarczyk, K., Bender, M., Yadav, N., Gąsior, P., Schledjewski, R. & Kaleta, J., 2022.

    Research output: Contribution to conference › Abstract

  13. Published

    Contact Lenses - Materials, Chemicals, Methods and Applications

    Fink, J., 2022

    Research output: Book/Report › Book › Research

  14. Published

    Controlled UV-mediated activation of dynamic exchange reactions in vitrimeric polymers by exploiting thermally stable photolatent bases

    Reisinger, D., Kaiser, S., Rossegger, E., Alabiso, W., Dietliker, K., Sangermano, M. & Schlögl, S., 2022.

    Research output: Contribution to conference › Poster › Research

  15. Published

    DETERMINATION OF A RACETRACKING PASS-FAIL CRITERION FOR EDGE FLOW PERMEABILITY MEASUREMENT

    George, A., Huntsman, M., Koorevaar, A., Fauster, E. & May, D., 2022, Characterization. Vassilopoulos, A. P. & Michaud, V. (eds.). p. 733-740 8 p. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Determining the surface tack of medical gloves

    Amirosanloo, S., Schlögl, S., Maroh, B., Schaller, R., Beglari, R. & Holzner, A., 2022.

    Research output: Contribution to conference › Poster › Research

  17. Published

    Development of Conductive Polymer Composites for the Material Extrusion of Dielectric Elastomer Actuators

    Steinert, T., 2022

    Research output: Thesis › Master's Thesis

  18. Published

    Development of degradable polymer networks

    Sölle, B., Rossegger, E., Trimmel, G. & Schlögl, S., 2022.

    Research output: Contribution to conference › Poster › Research

  19. Published

    DEVELOPMENT OF NOVEL MATRIX MATERIALS FOR TYPE V HYDROGEN GAS PRESSURE VESSELS

    Wanghofer, F., Wolfahrt, M., Wolfberger, A. & Schlögl, S., 2022, Applications and Structures. Vassilopoulos, A. P. & Michaud, V. (eds.). p. 260-265 6 p. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; vol. 5).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    DEVELOPMENT OF NOVEL POLYMERIC MATERIAL GRADES AND EXPERIMENTAL METHODS TO BE USED IN HIGH-PRESSURE H2 GAS ATMOSPHERES

    Balasooriya, W., Clute, C., Halder, K., Theiler, G., Hausberger, A. & Pinter, G., 2022, Proceedings of WHEC 2022 - 23rd World Hydrogen Energy Conference: Bridging Continents by H2. Dincer, I., Colpan, C. O. & Ezan, M. A. (eds.). p. 491-493 3 p. (Proceedings of WHEC 2022 - 23rd World Hydrogen Energy Conference: Bridging Continents by H2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Development of reworkable adhesives for automotive bonding applications

    Bautista-Anguís, D., Reiner, L., Wolfberger, A. & Schlögl, S., 2022.

    Research output: Contribution to conference › Poster › Research

  22. Published

    Dynamic Mechanical Response in Epoxy Nanocomposites Incorporating Various Nano-Silica Architectures

    Chaudhary, S., Vryonis, O., Vaughan, A. S., Andritsch, T. & Feuchter, M., 2022, ICD 2022 - IEEE 2022 4th International Conference on Dielectrics, Proceedings. Institute of Electrical and Electronics Engineers, p. 86-89 4 p. (ICD 2022 - IEEE 2022 4th International Conference on Dielectrics, Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Einfluss der Grenzflächeneigenschaften auf die mechanischen Eigenschaften von kurzfaserverstärkten Verbunden

    Cwioro, T., 2022

    Research output: Thesis › Master's Thesis

  24. Published

    Entwicklung eines Prüfaufbaus zur Bestimmung der biologischen Abbaubarkeit von Biokunststoffen

    Novak, P., 2022

    Research output: Thesis › Master's Thesis

  25. Published

    Environmental stress cracking of high-impact polystyrene and polycarbonate polyurethane in application-oriented media

    Huemer, M., 2022

    Research output: Thesis › Master's Thesis

  26. Published

    Erfassung relevanter Prozessgrößen für die modellgestützte Qualitätsprognose spritzgegossener Bauteile

    Pauer, M., 2022

    Research output: Thesis › Master's Thesis

  27. Published

    EXPERIMENTAL CHARACTERIZATION OF TRANSVERSE FABRIC COMPRESSIBILITY BY MEANS OF IN-SITU-IMPREGNATION

    Bender, M. & Fauster, E., 2022.

    Research output: Contribution to conference › Paper

  28. Published

    Filamentbasierter 3D-Druck für Metalle, Hartmetalle und Cermets

    Kukla, C., Duretek, I. & Lengauer, W., 2022, Pulvermetallurgie in Wissenschaft und Praxis: Pulvermetallurgie - vielfältige Prozesse und Werkstoffe. Broeckmann, C., Danninger, H. & Kaletsch, A. (eds.). Vol. 37. p. 75-103

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Fillers and elastomers for high-pressure hydrogen gas applications

    Clute, C., Balasooriya, W., Schlögl, S., Kerschbaumer, R. C. & Hausberger, A., 2022.

    Research output: Contribution to conference › Poster › Research

  30. Published

    Hydrophobic coating encompassing visibility-on-demand for smart and rapid quality control

    Bandl, C., 2022.

    Research output: Contribution to conference › Presentation › Research

  31. Published

    Improved layup quality during automated thermoplastic tape layup – Inline detection of consolidation force and tape geometry

    Yadav, N. & Schledjewski, R., 2022.

    Research output: Contribution to conference › Abstract

  32. Published

    Influence of cure-induced shrinkage of pre-impregnated woven glass fiber fabrics on the temperature- and direction-dependent deformation of composites measured by digital image correlation

    Sagerer, M., 2022

    Research output: Thesis › Master's Thesis

  33. Published

    Influence of Recyclates on Mechanical Properties and Lifetime Performance of Polypropylene Materials

    Hinczica, J., Messiha, M., Koch, T., Frank, A. & Pinter, G., 2022, 23rd European Conference on Fracture, ECF 2022. Moreira, P. & Reis, L. (eds.). Elsevier B.V., p. 139-146 8 p. (Procedia Structural Integrity; vol. 42).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Inline NDT for thermoplastic Automated Tape Layup

    Yadav, N., Oswald-Tranta, B. & Schledjewski, R., 2022.

    Research output: Contribution to conference › Poster › Research

  35. Published

    Introducing a visibility-on-demand property to an anti-adhesive coating. A smart approach for quality control

    Bandl, C., Kern, W. (Co-editor), Müller, M. (Co-editor) & Krempl, N. (Co-editor), 2022.

    Research output: Contribution to conference › Poster › Research

  36. Published

    Investigations on surface-tethered germanium based photoinitiators

    Müller, M., Kern, W. (Co-editor), Bandl, C. (Co-editor), Haas, M. (Co-editor) & Drusgala, M. (Co-editor), 2022.

    Research output: Contribution to conference › Poster › Research

  37. Published

    LIFE TIME ESTIMATION OF 3D-PRINTED CONTINUOUS FIBER REINFORCED PARTS UNDER FATIGUE LOADING

    Primetzhofer, A., Petermann, S., Dietsch, R., Leßlhumer, J., Arbeiter, F. & Pinter, G., 2022, Characterization. Vassilopoulos, A. P. & Michaud, V. (eds.). p. 791-797 7 p. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Machine Learning Based Tape Width Prediction for the Thermoplastic Automated Tape Placement Process

    Legenstein, A. & Schledjewski, R., 2022, Composites meet Sustainability – Proceedings of the 20th European Conference on Composite Materials. 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Manufacture of medical gloves by NR- and XNBR-latex vulcanization using UV-crosslinking techniques to avoid Type IV latex allergy

    Grabmayer, T., Schlögl, S., Schaller, R., Holzner, A. & Kern, W., 2022.

    Research output: Contribution to conference › Poster › Research

  40. Published

    Manufacture of Surgical and Examination Gloves using UV-Techniques by Crosslinking Diene Rubber Latices to Avoid Allergenic Reactions caused by classic Accelerator Chemicals

    Grabmayer, T., Schlögl, S., Schaller, R., Holzner, A. & Kern, W., 2022.

    Research output: Contribution to conference › Poster › Research

  41. Published

    Mechanical integrity of cranial implants produced via material extrusion-based additive manufacturing

    Petersmann, S., 2022

    Research output: Thesis › Doctoral Thesis

  42. Published

    Monitoring of thermoplastic composites with an FBG inscribed in highly-birefringent optic fiber

    Wachtarczyk, K., Yadav, N., Gąsior, P., Schledjewski, R. & Kaleta, J., 2022.

    Research output: Contribution to conference › Abstract

  43. Published

    Multimaterial spatial control of the mechanical properties of 3D printed objects by vat photopolymerization

    Cazin, I., Gleirscher, M., Fleisch, M., Sangermano, M., Sangermano, M. & Schlögl, S., 2022.

    Research output: Contribution to conference › Poster › Research

  44. Published

    NDE optical based methods for liners assessment for hydrogen storage

    Wachtarczyk, K., Gąsior, P., Kaleta, J. & Yadav, N., 2022.

    Research output: Contribution to conference › Poster › Research

  45. Published

    New approaches towards reinforced elastomer composites by in-situ crosslinking of functional resins

    Strohmeier, L., 2022

    Research output: Thesis › Doctoral Thesis

  46. Published

    Novel fracture mechanics concepts in elastomer fatigue to model the influence of temperature

    Schieppati, J., 2022

    Research output: Thesis › Doctoral Thesis

  47. Published

    Porous Plastics

    Fink, J., 2022

    Research output: Book/Report › Book › Research

  48. Published

    Prediction of the failure behaviour in steel cable reinforced rubber components using the Finite Element Method

    Frankl, S. M., 2022

    Research output: Thesis › Doctoral Thesis

  49. Published

    Produkt-adaptive Regelung des Kautschukspritzgießens

    Traintinger, M., 2022

    Research output: Thesis › Doctoral Thesis

  50. Published

    Residual strain and structural health monitoring for automated tape layup using HiBi FBG sensor

    Yadav, N., Wachtarczyk, K., Gąsior, P., Schledjewski, R. & Kaleta, J., 2022.

    Research output: Contribution to conference › Poster › Research

  51. Published

    Residual strain and structural health monitoring for automated tape layup using HiBi FBG sensor

    Yadav, N., 2022.

    Research output: Contribution to conference › Abstract

Previous 1...7 8 9 10 11 12 13 14 ...84 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301