Department Mineral Resources Engineering

Organisational unit: Departments and Institutes

1201 - 1300 out of 3,520Page size: 100

Research output

  1. 2018
  2. Published

    Towards closed water loops, ore sorting and tailings valorization for more sustainable raw material supply

    Obenaus-Emler, R., Kinnunen, P., Raatikainen, J., Guignot, S., Ciroth, A., Guimerà, J., Paajanen, M. & Heiskanen, K., 2018.

    Research output: Contribution to conference › Paper

  3. Published

    Tragverhalten von Tübbingen im maschinellen Tunnelbau: Experimentelle und numerische Analyse

    Gehwolf, P., 2018

    Research output: Thesis › Doctoral Thesis

  4. Published

    Tübbingforschung im 1:1 Maßstab

    Wenighofer, R. & Gehwolf, P., 2018, 1 p.

    Research output: Other contribution › Transfer

  5. Published

    Über den Einfluss unterschiedlicher Prüfanordnungen (schräg vs. vertikal) auf die Beurteilung flexibler Steinschlagschutzsysteme nach ETAG 027

    Heiss, C., 2018, In: Wildbach- und Lawinenverbau. 82, 182, p. 318-335 17 p.

    Research output: Contribution to journal › Article › Research

  6. Published

    Untersuchungen zum Trag- und Verformungsverhalten von Tübbingausbauelementen aus Faserbeton

    Lustinger, M., 2018

    Research output: Thesis › Master's Thesis

  7. Published

    ZaB - Zentrum am Berg - gerüstet für die Zukunft! Gast-Editorial

    Galler, R., 2018, In: Allgemeine Vermessungs-Nachrichten : AVN. p. 261-262 2 p.

    Research output: Contribution to journal › Editorial

  8. Published

    Zentrum am Berg: Forschungs-, Entwicklungs- und Schulungszentrum für Bau und Betrieb von Untertageanlagen

    Galler, R. & Wenighofer, R., 2018, In: Stein & Kies (Mitgliederzeitung - Forum mineralische Rohstoffe). 154, Mai-Juni, p. 11 1 p.

    Research output: Contribution to journal › Article › Transfer

  9. Published

    Zu Fragen der Charakterisierung, Aufbereitung und Veredlung von natürlichen Grafiten

    Lämmerer, W., 2018

    Research output: Thesis › Doctoral Thesis

  10. 2017
  11. Published

    Slag Rim Formation of two Mould Powders used for Casting of Construction Steel

    Marschall, I., Xia, G. & Kölbl, N., 14 Dec 2017, In: Berg- und hüttenmännische Monatshefte : BHM.

    Research output: Contribution to journal › Article › Research

  12. Published

    Staubemissionen in der Fördertechnik: Vergleich von bidirektional gekoppelten DEM-CFD Simulationen, Laborversuchen und Industrieanlagen

    Grübler, C. & Prenner, M., 12 Dec 2017

    Research output: Non-textual form › Web publication/site › Research

  13. Published

    LD-salak szeparálási kísérleteinek értékelése

    Kamali Moaveni, A. & Böhm, A., 1 Dec 2017, In: Bányászati és kohászati lapok = Zurnal gornogo dela i metallurgija = Zeitschrift für Berg- und Hüttenwesen / Kohászat = Metallurgija = Hüttenwesen. 150, 6, p. 6-11

    Research output: Contribution to journal › Article › Research

  14. Published

    Determination of the fracture behaviour of MgO-refractories using multi-cycle wedge splitting test and digital image correlation

    Dai, Y., Gruber, D. & Harmuth, H., Dec 2017, In: Journal of the European Ceramic Society. 37.2017, 15, p. 5035-5043 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Aktueller Stand der Tübbingforschung - Ein Einblick in die Forschungsarbeiten am Lehrstuhl für Subsurface Engineering

    Gehwolf, P., Wenighofer, R. & Galler, R., 30 Nov 2017, Geomechanik und Tunnelbau: Südbahntagung. p. 753 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Schaltvorrichtung zum Schalten einer elektrischen Verbindung, Energiespeichersystem für ein Fahrzeug sowie Verfahren zum Schalten einer elektrischen Verbindung

    Greilich, A. (Inventor), Galler, R. (Inventor), Klein, D. (Inventor) & Schoening, B. (Inventor), 30 Nov 2017, IPC No. H02J 15/ 00 A I, Patent No. DE102016109866, Priority date 30 May 2016, Priority No. DE201610109866

    Research output: Patent

  17. Published

    Schaltvorrichtung zum Schalten einer elektrischen Verbindung, Energiespeichersystem für ein Fahrzeug sowie Verfahren zum Schalten einer elektrischen Verbindung

    Galler, R. (Inventor), Greilich, A. (Inventor), Klein, D. (Inventor) & Schoening, B. (Inventor), 30 Nov 2017, IPC No. H02J 7/ 00 A I, Patent No. DE102016109862, Priority date 30 May 2016, Priority No. DE201610109862

    Research output: Patent

  18. Published

    Austrian Southern-Railway-Link-Conference : Südbahntagung

    Galler, R. & Moritz, B., 28 Nov 2017, In: Geomechanics and tunnelling = Geomechanik und Tunnelbau. 10.2017, 6, p. 636 1 p.

    Research output: Contribution to journal › Editorial › peer-review

  19. Published

    Cameras for digitized 3D geological documentation of the tunnel face from cutterheads of TBMs

    Wenighofer, R., Six, G., Galler, R. & Chmelina, K., 28 Nov 2017, In: Geomechanics and tunnelling = Geomechanik und Tunnelbau. 10.2017, 6, p. 760-766 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. E-pub ahead of print

    Künstliche neuronale Netze im Einsatz zur Gebrauchstauglichkeitsbewertung des einschaligen maschinellen Tunnelbaus

    Wenighofer, R. & Galler, R., 27 Nov 2017, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 163.2018, 12, p. 517-523 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Steinschlagsimulationen zur Abschätzung von Gefahrenbereichen in einem Tagbau

    Lamprecht, C. & Schuller, E., 24 Nov 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 162.2017, 12, p. 532-538 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Digitale Ortsbrustbilder mittels Kamerabefahrung eines TBM-Bohrkopfs

    Wenighofer, R. & Galler, R., 22 Nov 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 162.2017, 12, p. 568-572 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Aktuelle Infrastruktur im Labor für Gesteins- und Materialprüfung der Lehrstühle für Subsurface Engineering und für Bergbaukunde, Bergtechnik und Bergwirtschaft an der Montanuniversität Leoben

    Heiss, C. & Krainz, J., 17 Nov 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 162.2017, 12, p. 546-551 6 p.

    Research output: Contribution to journal › Article › Research

  24. Published

    Erweiterte Laborversuche zur Ermittlung der Eingabeparameter zur numerischen Simulation von Fels und Beton

    Stoxreiter, T., Gehwolf, P. & Galler, R., 16 Nov 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 10/2017

    Research output: Contribution to journal › Article › Research

  25. Published

    Klassierung von Flugstäuben

    Patscheider, S., 15 Nov 2017.

    Research output: Contribution to conference › Poster › Research

  26. Published

    Perlitische Mikrosphären

    Weingrill, G., 15 Nov 2017.

    Research output: Contribution to conference › Poster › Research

  27. Published

    Simulation von Bauteilen mittels der DEM

    Fimbinger, E. & Prenner, M., 15 Nov 2017, WerWasWo.Forschung@MUL. Leoben: Eigenverlag, Vol. 2017. p. 175 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  28. Published

    Simulation von Bauteilen mittels der DEM

    Fimbinger, E. & Prenner, M., 15 Nov 2017.

    Research output: Contribution to conference › Poster › Research

  29. Published

    Staubausbreitung im Stahlwerk

    Grübler, C., 15 Nov 2017, WerWasWO.Forschung@MUL. Leoben, Vol. 2017.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  30. Published

    Baugrubensicherung im Seeton: Vergleich des analytisch und numerisch ermittelten Deformationsverhaltens einer als Bohrpfahlwand ausgeführten Baugrubensicherung unter komplexen geotechnischen Bedingungen

    Granitzer, A.-N., Klampfer, B., Schuller, E. & Stoxreiter, T., 13 Nov 2017.

    Research output: Contribution to conference › Poster › Research

  31. Published

    Einfluss von Niederschlägen auf die Böschungsstabilität: Der in der Regel negative Einfluss von Regenereignissen auf die Stabilität von Böschungen wird mit Hilfe numerischer Simulationen untersicht.

    Pratter, P., Schuller, E. & Stoxreiter, T., 13 Nov 2017. 1 p.

    Research output: Contribution to conference › Poster › Research

  32. Published

    Kunststoffaufbereitung und -recycling

    Schwabl, D. & Bauer, M., 13 Nov 2017.

    Research output: Contribution to conference › Poster › Research

  33. Published

    Kunststoffaufbereitung und -recycling

    Schwabl, D. & Bauer, M., 13 Nov 2017, WerWasWo Forschung@MUL. Leoben, p. 201 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  34. Published

    Steinschlagsimulationen an Felsböschungen in einem Tagbau: Abschätzung des Gefährdungspotentials infolge Steinschlags mit Hilfe von zwei- und dreidimensionalen Steinschlagsimulationen

    Schuller, E., Forsthuber, M. & Lamprecht, C., 13 Nov 2017. 1 p.

    Research output: Contribution to conference › Poster › Research

  35. Published

    Theoretical Investigations on the Influence of Artificially Altered Rock Mass Properties on Mechanical Excavation

    Hartlieb, P. & Bock, S., 9 Nov 2017, In: Rock mechanics and rock engineering. 51.2018, March, p. 801–809 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. E-pub ahead of print

    Experimental study on artificially induced crack patterns and their consequences on mechanical excavation processes

    Hartlieb, P., Grafe, B., Shepel, T., Malovyk, A. & Akbari, B., 5 Nov 2017, (E-pub ahead of print) In: International Journal of Rock Mechanics and Mining Sciences. 100.2017, December, p. 160-169 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Facile synthesis of SiOx spheres or dumbbell-shaped β-SiC whiskers on expanded graphite by silicon vapor deposition

    Wang, Q., Li, Y., Jin, S., Sang, S., Xu, Y., Wang, G. & Xu, X., 1 Nov 2017, In: Ceramics International : CI. 43.2017, 16, p. 13282-13289 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Synergic effects of nano carbon sources on thermal shock resistance of Al2O3-C refractories

    Liao, N., Li, Y., Wang, Q., Zhu, T., Jin, S., Sang, S. & Jia, D., 1 Nov 2017, In: Ceramics International : CI. 43.2017, 16, p. 14380-14388 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Computational muck pile characterization

    Tscharf, A. & Mayer, G., Nov 2017.

    Research output: Contribution to conference › Poster › Research

  40. Published

    Correlation between chemical composition and alkali attack resistance of bauxite-SiC refractories in cement rotary kiln

    Bo, R., Yawei, L., Shengli, J. & Shaobai, S., Nov 2017, In: Ceramics International. 43.2017, 16, p. 14161-14167 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    SLIM - Sustainable Low Impact Mining: Europäisches Horizon 2020 - Forschungsprojekt

    Tscharf, A. & Sifferlinger, N. A., Nov 2017, In: Stein & Kies (Mitgliederzeitung - Forum mineralische Rohstoffe). 151, p. 11

    Research output: Contribution to journal › Article › Research

  42. Published

    UAV-Photogrammetrie zur Qualitätssteuerung im Tagbau

    Tscharf, A., Nov 2017, In: GeoNews : Software-Magazin für Vermessung und Geoinformation / rmData. 26, 4, p. 6-7

    Research output: Contribution to journal › Article › Research

  43. Published

    Effects of catalysts state on the synthesis of MWCNTs modified expanded graphite through microwave-assisted pyrolysis of ethanol

    Liao, N., Li, Y., Jin, S., Liu, G., Wan, Q., Sang, S. & Su, D., 1 Oct 2017, In: Journal of materials science. 52.2017, 19, p. 11442-11452 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Lightweight design of bauxite-SiC composite refractories as the lining of rotary cement kiln using alternative fuels

    Ren, B., Li, Y., Sang, S. & Jin, S., 1 Oct 2017, In: Ceramics International : CI. 43.2017, 14, p. 11048-11057 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Technical Report - Finite Element Analysis - 14" Integral Blind Flange CL1500

    Hopp, S., Stojkovic, S., Pramstaller, M. & Prenner, M., Oct 2017, 28 p.

    Research output: Book/Report › Commissioned report › Research

  46. Published

    Technical Report - Finite Element Analysis - 14" Integral Blind Flange CL900

    Hopp, S., Stojkovic, S., Pramstaller, M. & Prenner, M., Oct 2017, 28 p.

    Research output: Book/Report › Commissioned report › Research

  47. Published

    Technical Report - Finite Element Analysis - 14" Integral Blind Flange CL900 elasto plastic

    Hopp, S., Stojkovic, S., Pramstaller, M. & Prenner, M., Oct 2017, 23 p.

    Research output: Book/Report › Commissioned report › Research

  48. Published

    Fracture process zone development in a magnesia and a magnesia spinel refractory as observed by digital image correlation

    Gruber, D., Dai, Y. & Harmuth, H., 26 Sept 2017, Proceedings of UNITECR 2017: 26.9.2017-29.9.2017, Santiago de Chile, Chile. Santiago de Chile

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Bestandsaufnahme und mögliche Perspektiven der nassmechanischen Aufbereitung von Altkunststoffen für das rohstoffliche Recycling

    Bauer, M., Lehner, M., Schwabl, D., Flachberger, H., Kranzinger, L. J., Pomberger, R. & Hofer, W., 6 Sept 2017, In: Österreichische Wasser- und Abfallwirtschaft : ÖWAW . 69.2017, 11-12, p. 446-459 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Energieoptimierte Zerkleinerung im Feinkornbereich - Die Walzenschüsselmühle VRM 200 am Lehrstuhl für Aufbereitung und Veredlung der Montanuniversität Leoben

    Böhm, A., 1 Sept 2017, In: Sand & Kies aktuell. 5, 1 p.

    Research output: Contribution to journal › Article › Transfer

  51. Published

    Modelling and inverse investigation of the fracture process for a magnesia spinel refractory using a heterogeneous continuum model

    Dai, Y., Gruber, D., Harmuth, H. & Jin, S., Sept 2017, In: Engineering Fracture Mechanics. 182.2017, September, p. 438-448 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    The fragmentation energy fan, a Universal behavior of blasted rock? EFFE Newsletter

    Ouchterlony, F., Sept 2017, In: Newsletter / European Federation of Explosives Engineers . 2017, September, p. 30-46 17 p.

    Research output: Contribution to journal › Article › Research

  53. Published

    Aufbereitung von sekundärmetallurigischer Schlacke: Anwendung des aufbereitungstechnischen Rohgutanalysekonzeptes als Basis zur Anlagenauslegung

    Böhm, A. & Hirsch, G., 1 Aug 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 162, 8

    Research output: Contribution to journal › Article › Research

  54. Published

    Hard rock tunnel boring machine penetration test as an indicator of chipping process efficiency

    Villeneuve, M. C., 1 Aug 2017, In: Journal of Rock Mechanics and Geotechnical Engineering. 9.2017, 4, p. 611-622 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. E-pub ahead of print

    Influence of Melt Compounding on Blast Furnace Slag Filled PP Compounds: A Comparative Study

    Mostafa, A., Pacher, G., Lucyshyn, T., Holzer, C., Krischey, E., Flachberger, H., Fritz, B. & Laske, S., 31 Jul 2017, (E-pub ahead of print) In: International polymer processing. 32.2017, 4, p. 446-454 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. E-pub ahead of print

    Comparative Laboratory Studies of Conventional and Electrodynamic Fragmentation of an Industrial Mineral

    Tschugg, J., Öfner, W. & Flachberger, H., 26 Jul 2017, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 162.2017, 8, p. 319-325 7 p.

    Research output: Contribution to journal › Article › Transfer › peer-review

  57. E-pub ahead of print

    Wissenswertes zur Charakterisierung und Aufbereitung von Rohgrafiten

    Lämmerer, W. & Flachberger, H., 25 Jul 2017, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 162.2017, 8, p. 336-344 9 p.

    Research output: Contribution to journal › Article › Transfer

  58. E-pub ahead of print

    BUBLON®/BUBLITE – Zero Waste bei der Aufbereitung vulkanischer Gläser

    Weingrill, G., Brunnmair, E. & Flachberger, H., 24 Jul 2017, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 162.2017, 8, p. 306-318 12 p.

    Research output: Contribution to journal › Article › Transfer

  59. Published

    Orientierende Untersuchungen zum Einsatz von Klassierprozessen in der Nichteisenmetallurgie

    Patscheider, S., Flachberger, H. & Antrekowitsch, J., 20 Jul 2017, In: Berg- und hüttenmännische Monatshefte : BHM.

    Research output: Contribution to journal › Article › Research

  60. Published

    Entwicklung eines adaptierten Bohrverfahrens zur Senkung der Bohrkosten für Geothermiebohrungen

    Stoxreiter, T. & Galler, R., 17 Jul 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 162.2017, 9, p. 453-456 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. E-pub ahead of print

    Shrinkage and Warpage Optimization of Expanded-Perlite-Filled Polypropylene Composites in Extrusion-Based Additive Manufacturing

    Spörk, M., Sapkota, J., Weingrill, G., Fischinger, T., Arbeiter, F. & Holzer, C., 4 Jul 2017, (E-pub ahead of print) In: Macromolecular materials and engineering. 302.2017, 10, 13 p., 1700143.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Is it time for a Global Mining Initiative 2.0?

    Tost, M., Chandurkar, V., Hitch, M., Moser, P. & Feiel, S., 28 Jun 2017, Mineral Exploitation and Sustainability - Proceedings of SDIMI 2017. Vol. Vol2. p. 41-47 7 p. (Geo-Resources Environment and Engineering; vol. Vol2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    Slag rim formation of two mold powders used for casting of construction steel

    Marschall, I., Xia, G. & Kölbl, N., 26 Jun 2017, Proceedings of 9th ECCC European Continuous Casting Conference - ECCC2017. ASMET, p. 605-614

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Mechanical Processing of Post-Consumer Plastics for Feedstock Recycling

    Schwabl, D., Flachberger, H., Bauer, M., Lehner, M., Kranzinger, L. J., Pomberger, R. & Hofer, W., 23 Jun 2017.

    Research output: Contribution to conference › Paper

  65. Published

    Mechanical Processing of Post-Consumer Plastics for Feedstock Recycling

    Schwabl, D., Flachberger, H., Kranzinger, L. J., Pomberger, R., Bauer, M., Lehner, M. & Hofer, W., 23 Jun 2017.

    Research output: Contribution to conference › Presentation › Research

  66. Published

    Observation and quantification of the fracture process zone for two magnesia refractories with different brittleness

    Dai, Y., Gruber, D. & Harmuth, H., 1 Jun 2017, In: Journal of the European Ceramic Society. 37.2017, 6, p. 2521-2529 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    „Structure from Motion" zur flächigen Deformationsvermessung unter Tage -: Modellversuche als Beitrag zur Entwicklung eines nutzerfreundlichen Messsystems unter Verwendung von Bildern

    Berger, M., Tscharf, A. & Mayer, G., 15 May 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 162.2017, 6, p. 210-215 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. E-pub ahead of print

    Reduced brittleness of multi-walled carbon nanotubes (MWCNTs) containing Al2O3-C refractories with boron carbide

    Liao, N., Li, Y., Jin, S., Sang, S. & Liu, G., 12 May 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 698.2017, 20 June, p. 80-87 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    HIGH-PRECISION SENSORS FOR DETECTING A MECHANICAL LOAD OF A MINING TOOL OF A TUNNEL BORING MACHINE

    Barwart, S. (Inventor) & Galler, R. (Inventor), 4 May 2017, IPC No. E21D 9/ 11 A I, Patent No. US2017122103, Priority date 2 Apr 2015, Priority No. WO2015EP57361

    Research output: Patent

  70. Published

    Digital mehr sehen: Kamerasystem in Tunnelbohrmaschinen ermöglichen strukturelle Analysen

    Wenighofer, R. & Többen, N., May 2017, In: Digital Engineering Magazin. 2017, 05, p. 62-64 3 p.

    Research output: Contribution to journal › Article › Transfer

  71. Published

    Fracture behaviour and microstructure of refractory materials for steel ladle purging plugs in the system Al2O3-MgO-CaO

    Long, B., Xu, G., Buhr, A., Jin, S. & Harmuth, H., 26 Apr 2017, In: Ceramics International : CI. 43.2017, 13, p. 9679-9685 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Experimental method for capturing dynamic crack propagation in rock-like material

    Kukolj, I., Ouchterlony, F. & Moser, P., 19 Apr 2017, International Forum of Young Researchers - Topical Issues of Subsoil Usage: Topical Issues of Rational Use of Natural Resources. St. Petersburg, Russian Federation, Vol. 1. p. 53-55 3 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    From laboratory to big scale – Challenges for FEM modelling of big-scale tests

    Gehwolf, P., 18 Apr 2017, Computational Methods in Tunneling and Subsurface Engineering: EURO:TUN 2017.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Enhanced formation of magnesium silica hydrates (M-S-H) using sodium metasilicate and caustic magnesia in magnesia castables

    Zhang, Y., Li, Y., Xu, Y., Sang, S. & Jin, S., 12 Apr 2017, In: Ceramics International : CI. 43.2017, 12, p. 9110-9116 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Inverse determination of rock mechanical parameters using non-standard laboratory tests

    Stoxreiter, T., Apr 2017, Proceedings of the IV International Conference on Computational Methods in Tunneling and Subsurface Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Numerical investigation of the influence of rainfall events on the slope stability

    Sachs, G., Schuller, E. & Stoxreiter, T., Apr 2017, Proceedings of the IV International Conference on Computational Methods in Tunneling and Subsurface Engineering. p. 107 - 114

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Vergleichende Betrachtung der Trennstufen eines Aufbereitungsprozesses für polyolefinreiche Altkunststofffraktionen

    Schwabl, D., Flachberger, H., Bauer, M., Lehner, M., Kranzinger, L. J., Pomberger, R. & Hofer, W., 30 Mar 2017, 13th Minisympsium Verfahrenstechnik: Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Vergleichende Betrachtung der Trennstufen eines Aufbereitungsprozesses für polyolefinreiche Altkunststofffraktionen

    Schwabl, D., Flachberger, H., Bauer, M., Lehner, M., Kranzinger, L. J., Pomberger, R. & Hofer, W., 30 Mar 2017.

    Research output: Contribution to conference › Presentation › Research

  79. Published

    High-precision sensors for detecing a mechanical load of a mining tool of a tunnel boring machine

    S.巴尔瓦特 (Inventor) & R.加勒, R. (Inventor), 15 Feb 2017, IPC No. E21D 9/ 00 A I, Patent No. CN106414898, Priority date 2 Apr 2015, Priority No. WO2015EP57361

    Research output: Patent

  80. Published

    HOCHPRÄZISE SENSORIK ZUM ERMITTELN EINER MECHANISCHEN BELASTUNG EINES ABBAUWERKZEUGS EINER TUNNELBOHRMASCHINE

    Barwart, S. (Inventor) & Galler, R. (Inventor), 15 Feb 2017, IPC No. E21D 9/ 11 A I, Patent No. EP3129593, Priority date 2 Apr 2015, Priority No. WO2015EP57361

    Research output: Patent

  81. Published

    Thermodynamic and Experimental Investigations of High-Temperature Refractory Corrosion by Molten Slags

    Wagner, C., Wenzl, C., Gregurek, D., Kreuzer, D., Luidold, S. & Schnideritsch, H., 1 Feb 2017, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 48.2017, February, p. 119-131 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Charakterisierung von gesprengtem Haufwerk mittels UAV

    Tscharf, A., Feb 2017, In: Stein & Kies (Mitgliederzeitung - Forum mineralische Rohstoffe). 147, p. 11-11

    Research output: Contribution to journal › Article › Research

  83. Published

    The fragmentation-energy fan, a universal behavior of blasted rock?

    Ouchterlony, F., Sanchidrián, J. A. & Moser, P., 29 Jan 2017, Proc 43rd ISEE Conference on Explosives and Blasting Technique. Cleveland, OH, Vol. 43. p. 281-294 14 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    xP-frag, a distribution-free model to predict blast fragmentation

    Sanchidrián, J. A. & Ouchterlony, F., 29 Jan 2017, Proc 43rd ISEE Conference on Explosives and Blasting Technique. Cleveland, OH, Vol. 43. p. 265-280 16 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    BUBLON / BUBLITE - Zero waste bei der Aufbereitung vulkanischer Gläser

    Weingrill, G., 26 Jan 2017.

    Research output: Contribution to conference › Presentation › Research

  86. Published

    Sistema de sensores de alta precisión para detectar una carga mecánica de una herramienta excavadora de una tuneladora

    Barwart, S. (Inventor) & Galler, R. (Inventor), 20 Jan 2017, IPC No. E21D 9/ 00 A I, Patent No. CL2016002533, Priority date 8 Apr 2014, Priority No. DE201410105014

    Research output: Patent

  87. Published

    A Distribution-Free Description of Fragmentation by Blasting Based on Dimensional Analysis

    Sanchidrián, J. A. & Ouchterlony, F., 2017, In: Rock mechanics and rock engineering. 50.2017, 4, p. 781-806 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Advanced creep testing of refractories providing new insight into material behaviour

    Jin, S., 2017.

    Research output: Contribution to conference › Poster › Research

  89. Published

    Analyse der Prozesswassersituation der Schwertrübescheidung und Ermittlung von Möglichkeiten einer Kreislaufführung sowie technische Auslegung für die Aufbereitungsanlage in Wolfach

    Max, M., 2017

    Research output: Thesis › Master's Thesis

  90. Published

    Analyse eines bindemittelhaltigen Pumpversatzes

    Schall, M. & Moser, A., 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 162, 6

    Research output: Contribution to journal › Article › Research

  91. Published

    Analyse und Optimierung der Versatzeigenschaften im Scheelit-Bergbau Mittersill

    Walkner, M., 2017

    Research output: Thesis › Master's Thesis

  92. Published

    Anwendung von Gebirgsklassifikationssystemen im untertägigen Bergbau

    Kirschner, P. & Moser, A., 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 162, 6

    Research output: Contribution to journal › Article › Research

  93. Published

    Application of rock mass classification systems as a tool for rock mass strength determination

    Moser, A., 2017, Deep Mining 2017: Eighth International Conference on Deep and High Stress Mining.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Challenges and limits of rock mass documentation and classification systems

    Moser, A., 2017, VIII International Research and Practice Conference “Innovations in Mining Enterprise Engineering: Geomechanical Tools in Planning, Design and Mining Operations”.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Charakterisierung des Kristallisationsverhaltens einer fluorfreien Gießschlacke für den Strangguss von Stahl

    Schützeneder, A., 2017

    Research output: Thesis › Master's Thesis

  96. Published

    Charakterisierung und Potential polyolefinreiche Abfallströme für die rohstoffliche Verwertung

    Kranzinger, L., Pomberger, R., Schwabl, D., Bauer, M. & Hofer, W., 2017, Recycling und Rohstoffe. Vol. 10. p. 219 - 228

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  97. Published

    Combined Effects of Boron Carbide, Silicon, and MWCNTs in Alumina-Carbon Refractories on Their Microstructural Evolution

    Liao, N., Li, Y., Jin, S., Xu, Y., Sang, S. & Deng, Z., 2017, In: Journal of the American Ceramic Society. 100.2017, 1, p. 443-450 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Comparison of Cement- and Hydratable Alumina-Bonded Alumina-Spinel Materials for Steel Ladle Purging Plugs

    Long, B., Buhr, A., Jung, I.-H., Jin, S., Harmuth, H. & Dutton, J., 2017, In: Refractories worldforum. 9, 3, p. 93-106 14 p.

    Research output: Contribution to journal › Article › Research

  99. Published

    Composition and properties of a metakaolin-based geopolymer binder suitable for shaping using a slinger

    Harmuth, H. & Mairitsch, E., 2017, Construction and Building Materials. p. 277-283

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  100. Published

    Compressive creep testing of carbon containing materials under reducing atmosphere

    Li, Y., 2017

    Research output: Thesis › Master's Thesis

  101. Published

    Deposit modeling procedure for steep-dipping veins (lithium project Koralpe) using Surpac

    Martinez Rodriguez, A., 2017

    Research output: Thesis › Master's Thesis

  102. Published

    Der Aufbereiter 2017

    Böhm, A. (Editor) & Luckeneder, C. (Editor), 2017, Der Aufbereiter 2017. 47 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer

Previous 1...9 10 11 12 13 14 15 16 ...36 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 6601