Department Materials Science

Organisational unit: Departments and Institutes

451 - 500 out of 5,455Page size: 50

Research output

  1. 2023
  2. Published

    Structure and migration mechanisms of small vacancy clusters in Cu: A combined EAM and DFT study

    Fotopoulos, V., Mora-Fonz, D., Kleinbichler, M., Bodlos, R., Kozeschnik, E., Romaner, L. & Shluger, A. L., 2023, In: Nanomaterials. 13.2023, 9, 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Structure-Property Relationships in Substituted BaTiO3: A Theoretical Study

    Mayer, F., 2023

    Research output: Thesis › Doctoral Thesis

  4. Published

    Synchrotron-Based Characterization of Bulk Metallic Glasses

    Rovira Ferrer, D., 2023

    Research output: Thesis › Master's Thesis

  5. Published

    Synthesis and Characterization of High Entropy Alloy Nitrides

    Tabelander, M., 2023

    Research output: Thesis › Master's Thesis

  6. Published

    Tailoring α2/γ and γ/γ interfaces in TiAl alloys via segregation: A multi-method study

    Gehringer, D., Holec, D., Huber, L. & Neugebauer, J., 2023.

    Research output: Contribution to conference › Poster › Research

  7. Published

    Tape casting of Cr2AlC MAX phase for multi-material designs

    Prötsch, T., 2023

    Research output: Thesis › Master's Thesis

  8. Published

    Temperature effect during mechanical alloying on the yttria evolution in the processing of an ODS FeCrMnNiCo alloy

    Mayer, M., 2023

    Research output: Thesis › Doctoral Thesis

  9. Published

    Templated grain growth in rapid sintered 3D-printed alumina ceramics

    Hofer, A.-K., Kocjan, A. & Bermejo Moratinos, R., 2023, In: Open ceramics. 15, 100428.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    The effect of liquid phase chemistry on the densification and strength of cold sintered ZnO

    Jabr, A., Fanghanel, J., Zongming, F., Bermejo, R. & Randall, C. A., 2023, In: Journal of the European Ceramic Society. 43.2023, 4, p. 1531-1541 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    The effects of grain size on the elastic response of FeCrMnNiCo high entropy alloy: a molecular dynamics study

    Zetterberg, K., 2023

    Research output: Thesis › Master's Thesis

  12. Accepted/In press

    The Influence of Phase Formation on Irradiation Tolerance in a Nanocrystalline TiZrNbHfTa Refractory High-Entropy Alloy

    Moschetti, M., Xu, A., Hohenwarter, A., Wei, T., Davis, J., Short, K., Thorogood, G. J., Kong, C., Couzinié, J.-P., Bhattacharyya, D., Kruzic, J. J. & Gludovatz, B. P., 2023, (Accepted/In press) In: Advanced Engineering Materials. ??? Stand: 16. Februar 2024, ??? Stand: 16. Februar 2024, 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    The micromechanical characterization of silicon up to 950 °C

    Schaffar, G. J. K., Tscharnuter, D. & Maier-Kiener, V., 2023.

    Research output: Contribution to conference › Poster › Research

  14. Published

    Thermal shock behavior of 3D-printed alumina ceramics with spatially tailored porosity

    Bastos Mateus, L., 2023

    Research output: Thesis › Master's Thesis

  15. Published

    Towards Atom Probe Crystallography of Thin Films

    Rainer, D., 2023

    Research output: Thesis › Master's Thesis

  16. Published

    Untersuchung der Kontaktschädigung von Kugellagerkugeln aus Siliziumnitrid

    Pasterk, M., 2023

    Research output: Thesis › Master's Thesis

  17. Published

    Variation der Lösungsglühtemperatur und Festigkeitsmodellierung von Fe-12Ni Maraging-Stählen

    Karner, M., 2023

    Research output: Thesis › Master's Thesis

  18. 2022
  19. Published

    Transformation of amorphous passive oxide film on Zr65Cu17.5Ni10Al7.5 metallic glass ribbons

    Sarac, B., Kvaratskheliya, A., Zadorozhnyy, V., Ivanov, Y. P., Klyamkin, S., Xi, L., Berdonosova, E., Kaloshkin, S., Zadorozhnyy, M. & Eckert, J., 25 Dec 2022, In: Journal of alloys and compounds. 929.2022, 25 December, 8 p., 167265.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Elucidation of formation and transformation mechanisms of Ca-rich Laves phase in Mg-Al-Ca-Mn alloys

    LI, J., Zhou, X., Breen, A., Peng, Z., Su, J., Kürnsteiner, P., Correa, M. J. D., Chwałek, M. L., Wang, H., Holec, D., Mayer, J. & Dehm, G., 20 Dec 2022, In: Journal of alloys and compounds. 928.2022, 20 December, p. 1-12 12 p., 167177.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Advances in multi-scale mechanical characterization

    Mangalampalli, K., Ghosh, P., Volpi, F., Kiener, D. & Useinov, A., 8 Dec 2022, In: Journal of applied physics. 132:2022, 22, 4 p., 220401.

    Research output: Contribution to journal › Editorial › peer-review

  22. Published

    Enhanced mechanical performance of gradient-structured CoCrFeMnNi high-entropy alloys induced by industrial shot-blasting

    Zhang, M. Z., Zhang, K., Song, K., Zou, X. Y., Song, W. D., Li, K. F., Hu, L.-N., Zhang, Z.-Q. & Eckert, J., 7 Dec 2022, In: Rare Metals. 42.2023, March, p. 982-993 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Long-Range Magnetic Order in Nickel Hydroxide-Functionalized Graphene Quantum Dots

    Michal, L., Roy, R., Holec, D., Perez, J. G., Pizurová, N., Necas, D., Doleckova, A., Medalova, J., Lepcio, P. & Zajickkova, L., 7 Dec 2022, In: Journal of physical chemistry letters. 13.2022, 49, p. 11536-11542 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Laser powder bed fusion of intermetallic titanium aluminide alloys using a novel process chamber heating system: A study on feasibility and microstructural optimization for creep performance

    Wartbichler, R., Maiwald-Immer, T., Pürstl, F. & Clemens, H., 5 Dec 2022, In: Metals : open access journal . 12.2022, 12, 23 p., 2087.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Iron oxide - poly(m-anthranilic acid)-poly(ϵ-caprolactone) electrospun composite nanofibers: fabrication and properties

    Huner, K., Sarac, B., Yüce, E., Rezvan, A., Micusik, M., Omastova, M., Eckert, J. & Sarac, A. S., 2 Dec 2022, In: Molecular Systems Design and Engineering. 8.2023, 3, p. 394-406 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Limpet teeth microstructure unites auxeticity with extreme strength and high stiffness

    Oh, S. H., Kim, J.-K., Liu, Y., Wurmshuber, M., Peng, X.-L., Seo, J., Jeong, J., Wang, Z., Wilmers, J., Soyarslan, C., Kim, J., Kittiwirayanon, B., Jeong, J., Kim, H.-J., Huh, Y. H., Kiener, D., Bargmann, S. & Gao, H., 2 Dec 2022, In: Science Advances. 8.2022, 48, 10 p., eadd4644.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Degradation of regenerated cellulose filaments by hydrogen chloride under aqueous and non-aqueous conditions

    Ungerer, B., Sulaeva, I., Bodner, S., Potthast, A., Keckes, J., Müller, U. & Veigel, S., Dec 2022, In: Carbohydrate polymer technologies and applications. 4.2022, December, 9 p., 100238.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Probing the stability, adhesion strength, and fracture mechanism of Mg/Al2Y interfaces via first-principles calculations

    Zhou, Y., Wang, H., Dong, Q., Tan, J., Chen, X., Jiang, B., Pan, F. & Eckert, J., Dec 2022, In: Materials Today Communications. 33.2022, December, 11 p., 104612.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Shear-band blunting governs superior mechanical properties of shape memory metallic glass composites

    Zhang, L., Yan, T., Şopu, D., Wu, Y., Jiang, B., Du, K., Zhang, H. & Eckert, J., Dec 2022, In: Acta Materialia. 241.2022, December, 12 p., 118422.

    Research output: Contribution to journal › Article › Research › peer-review

  30. E-pub ahead of print

    On the Temperature-Induced Equilibration of Phase Distribution and Microstructure in a Gas-Atomized Titanium Aluminide Powder

    Musi, M., Clemens, H., Stark, A. & Spörk-Erdely, P., 26 Nov 2022, (E-pub ahead of print) In: Advanced engineering materials. 25.2023, 6, 6 p., 2201242.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Phase Transformation Induced by High Pressure Torsion in the High-Entropy Alloy CrMnFeCoNi

    Chulist, R., Pukenas, A., Chekhonin, P., Hohenwarter, A., Pippan, R., Schell, N. & Skrotzki, W., 25 Nov 2022, In: Materials. 2022, 15, 18 p., 8407.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Stahlrecycling – Potenziale und Herausforderungen für innovatives und nachhaltiges Recycling

    Dworak, S., Fellner, J., Beermann, M., Häuselmann, M., Schenk, J., Michelic, S. K., Cejka, J., Sakic, A., Mayer, J. & Steininger, K., 25 Nov 2022, In: Österreichische Wasser- und Abfallwirtschaft : ÖWAW . 75.2023, Februar, p. 97-107 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. E-pub ahead of print

    An improved process scan strategy to obtain high-performance fatigue properties for Scalmalloy®

    Schimbäck, D., Mair, P., Kaserer, L., Perfler, L., Palm, F., Leichtfried, G. & Pogatscher, S., 22 Nov 2022, (E-pub ahead of print) In: Materials and Design. 224.2022, December, 11 p., 111410.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Graded Inconel-stainless steel multi-material structure by inter- and intralayer variation of metal alloys

    Bodner, S., Hlushko, K., van de Vorst, L. T. G., Meindlhumer, M., Todt, J., Nielsen, M. A., Hooijmans, J. W., Saurwalt, J. J., Mirzaei, S. & Keckes, J., 19 Nov 2022, In: Journal of Materials Research and Technology. 21.2022, November-December, p. 4846-4859 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Critical Aspects Concerning Large-scale Production of a Batch-annealed Medium-Mn 780 MPa Grade for Automotive Applications

    Steineder, K., Krizan, D., Stadler, M., Ritsche, S., Berger, E., Holtmann, N., Schnitzer, R. & Schneider, R., 18 Nov 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 11, p. 513-516 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Publisher Correction: In situ fracture observations of distinct interface types within a fully lamellar intermetallic TiAl alloy (Journal of Materials Research, (2021), 36, 12, (2465-2478), 10.1557/s43578-020-00088-z)

    Burtscher, M., Alfreider, M., Schmuck, K. S., Clemens, H., Mayer, S. & Kiener, D., 14 Nov 2022, In: Journal of Materials Research. 37.2021, p. 3855 1 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  37. Published

    The role of alloying elements in NiAl and Ni3Ti strengthened Co-free maraging steels

    Zeisl, S., Landefeld, A., Van Steenberge, N., Chang, Y. & Schnitzer, R., 9 Nov 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 861.2022, 19 December, 9 p., 144313.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Microstructure, Plasticity and Ductility of a TNM+ Alloy Densified by Spark Plasma Sintering

    Musi, M., Deshayes, C., Molénat, G., Toualbi, L., Galy, B., Spörk-Erdely, P., Hantcherli, M., Monchoux, J.-P., Thomas, M., Clemens, H. & Couret, A., 8 Nov 2022, In: Metals : open access journal . 12.2022, 11, 22 p., 1915.

    Research output: Contribution to journal › Article › Research › peer-review

  39. E-pub ahead of print

    Effect of cold deformation on the stress corrosion cracking resistance of a high-strength stainless steel

    Truschner, M., Janda, A., Bodner, S. C., Keplinger, A. & Mori, G. K., 6 Nov 2022, (E-pub ahead of print) In: Journal of materials science. 57.2022, November, p. 20447–20461 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Surmounting the thermal processing limits: Patterning TiZrCuPdSn bulk metallic glass even with nanocrystallization

    Cai, F.-F., Sarac, B., Chen, Z., Czibula, C. M., Spieckermann, F. & Eckert, J., 4 Nov 2022, In: Materials today advances. 16.2022, December, 8 p., 100316.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Mechanical performance of doped W–Cu nanocomposites

    Wurmshuber, M., Burtscher, M., Doppermann, S., Bodlos, R., Scheiber, D., Romaner, L. & Kiener, D., 1 Nov 2022, In: Materials Science and Engineering A. 857.2022, 1 November, 12 p., 144102.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Optimal tensile properties of laser powder bed fusion hereditary basket-weave microstructure in additive manufactured Ti6Al4V

    Lu, S., Zhang, Z., Liu, R., Zhou, X., Wang, X., Zhang, B. N., Zhao, X., Eckert, J. & Zhang, Z., Nov 2022, In: Additive Manufacturing. 59.2022, November Part A, 14 p., 103092.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Mechanical Properties and Microstructural Evolution of Ti-25Nb-6Zr Alloy Fabricated by Spark Plasma Sintering at Different Temperatures

    Zhu, Q., Chen, P., Xiao, Q., Li, F., Yi, J., Prashanth, K. G. & Eckert, J., 27 Oct 2022, In: Metals. 12.2022, 11, 13 p., 1824.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Accurate ab initio modeling of solid solution strengthening in high entropy alloys

    Moitzi, F., Romaner, L., Ruban, A. V. & Peil, O., 24 Oct 2022, In: Physical review materials . 6.2022, 10, 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Determination of Cooling Rate and Temperature Gradient during Formation of Cathode Spot Craters in a Vacuum Arc

    Mogeritsch, J., Franz, R., Golizadeh, M., Mitterer, C. & Kharicha, A., 19 Oct 2022, In: Crystals. 12.2022, 10, 13 p., 1486.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Theory of asymmetric and piezotronically modified double Schottky barriers

    Kaufmann, B. & Supancic, P., 14 Oct 2022, In: Journal of applied physics. 132, 14

    Research output: Contribution to journal › Article › Research › peer-review

  47. E-pub ahead of print

    Anomalous thermal conductivity in amorphous niobium pentoxide thin films: A correlation study between structure and thermal properties

    Mitterhuber, L. M., Kaliyaperumal Veerapandiyan, V., Deluca, M., Misture, S., Schaeperkoetter, J., Tkadletz, M., Mitterer, C. & Spitaler, J., 13 Oct 2022, (E-pub ahead of print) In: Materialia. 26.2022, December, 9 p., 101601.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Designing lightweight multicomponent magnesium alloys with exceptional strength and high stiffness

    Gu, Z., Zhou, Y., Dong, Q., He, G., Cui, J., Tan, J., Chen, X., Jiang, B., Pan, F. & Eckert, J., 10 Oct 2022, In: Materials Science and Engineering A. 855.2022, 10 October, 10 p., 143901.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Enhancement in strength and thermal stability of selective laser melted Al–12Si by introducing titanium nanoparticles

    Qi, J., Liu, C. Y., Chen, Z. W., Liu, Z. Y., Tian, J. S., Feng, J., Okulov, I. V., Eckert, J. & Wang, P., 10 Oct 2022, In: Materials Science and Engineering A. 855.2022, 10 October, 12 p., 143833.

    Research output: Contribution to journal › Article › Research › peer-review

  50. E-pub ahead of print

    Enhanced mechanical properties of Zr65Cu15Ni10Al10bulk metallic glass by simultaneously introducing surface grooves and multiple shear bands

    Yuan, X., Zhang, Z., Gao, Q., Zhou, L., Song, K., Zou, X., Şopu, D., Hu, L., Sun, B. & Eckert, J., 4 Oct 2022, (E-pub ahead of print) In: Journal of Materials Research and Technology. 21.2022, November-December, p. 1490-1506 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. E-pub ahead of print

    The effect of zirconium on the Ti-(42-46 at.%)Al system

    Musi, M., Kardos, S., Hatzenbichler, L., Holec, D., Stark, A., Allen, M., Güther, V., Clemens, H. & Spörk-Erdely, P., 2 Oct 2022, (E-pub ahead of print) In: Acta materialia. 241.2022, December, 13 p., 118414.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Crack path investigations in a pearlitic rail steel after pre-deformation under cyclic Mode-II loading

    Schnalzger, G., Daves, W., Pippan, R., Maierhofer, J. & Hohenwarter, A., Oct 2022, In: Engineering Failure Analysis. 140.2022, October, 14 p., 106567.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...6 7 8 9 10 11 12 13 ...110 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9/1.UG, 8700 Leoben