Department Materials Science

Organisational unit: Departments and Institutes

201 - 250 out of 5,453Page size: 50

Research output

  1. 2024
  2. Published

    Pathways Towards the Functionalization of Three-Dimensional Substrates

    Knabl, F., 2024

    Research output: Thesis › Doctoral Thesis

  3. Published

    Phase fraction and morphology of retained austenite in high-strength weld metal

    Rinnhofer, N., 2024

    Research output: Thesis › Master's Thesis

  4. Published

    PLASMA MODIFICATION OF POLYACRYLONITRILE POWDER OR SOLUTION PRIOR ELECTROSPINNING

    Pijáková, B., Elbataioui, A., Rafailovic, L., Bautista, A. D., Schlögl, S., Dvořáková, E., Mühlbacher, I. & Ráheľ, J., 2024, NANOCON 2023 - 15th International Conference on Nanomaterials - Research and Application, Conference Proceedings. p. 154-159 6 p. (NANOCON Conference Proceedings - International Conference on Nanomaterials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Processing-structure-properties relationships of PH 13-8 Mo maraging steels

    Rosenauer, A., 2024

    Research output: Thesis › Doctoral Thesis

  6. Published

    Purity and surface area: Key factors on thermal stability and oxidation resistance of BN nanoplatelets

    Kostoglou, N., Stock, S., Solomi, A., Holzapfel, D. M., Hinder, S. J., Baker, M., Constantinides, G., Ryzhkov, V., Maletaskic, J., Matovic, B., Schneider, J. M., Rebholz, C. & Mitterer, C., 2024.

    Research output: Contribution to conference › Poster › Research

  7. Published

    Reformable bio-based thiol-ene vitrimers for nanoimprint lithography: enhanced covalent adaptability for adjustable surface properties

    Uher, J. M., Sölle, B., Reisinger, D., Sölle, B., Heupl, S., Jelinek, A., Schlögl, S. & Rossegger, E., 2024.

    Research output: Contribution to conference › Poster › Research

  8. Published

    Segregation analysis of a temper embrittled 51CrV4 with elevated trace element content for green steel production

    Teuschl, H., 2024

    Research output: Thesis › Master's Thesis

  9. Published

    Strength and Fracture Toughness Testing of Brittle Materials and Components

    Lube, T., 2024

    Research output: Thesis › Habilitation thesis › peer-review

  10. Published

    Strength testing of additive manufactured ceramics – A round robin using the CharAM-methodology

    Staudacher, M., Scheithauer, U., Reichel, M., Schwentenwein, M. & Lube, T., 2024, In: Open ceramics. 100557.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Structure-property relationship of high-strength weld metal

    Schrittwieser, D., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  12. Published

    Test Specimen for Strength Testing of Additive Manufactured Ceramics by the VPP Process: the CharAM-Specimen

    Lube, T., Staudacher, M., Scheithauer, U., Schwentenwein, M., Brouczek, D. & Schmid, H., 2024

    Research output: Non-textual form › Data set/Database › Research

  13. Published

    The anneal hardening phenomenon in the nanostructured Ti-Nb-Zr system

    Verhoestraete, E., 2024

    Research output: Thesis › Master's Thesis

  14. Published

    The Ball-on-Three-Balls strength test: Effective volumes and surfaces for Weibull strength scaling

    Staudacher, M., Eggel, A. E., Supancic, P. H. & Lube, T., 2024, In: Journal of the European Ceramic Society. 44.2024, 1, p. 173-183 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    The impact of different textural carbon felt materials on dye adsorption: The external surface matters

    Ioannou, K., Mulla, B., Ioannidis, I., Pashalidis, I., Kostoglou, N. & Rebholz, C., 2024.

    Research output: Contribution to conference › Poster › Research

  16. Published

    The plasticity of silicon at high temperatures and small length scales

    Schaffar, G. J. K., Tscharnuter, D., Imrich, P. J. & Maier-Kiener, V., 2024.

    Research output: Contribution to conference › Poster › Research

  17. Published

    Thermal treatment of continuous alumina fibers

    Gruber, F. I., 2024

    Research output: Thesis › Master's Thesis

  18. Published

    Understanding high-temperature plasticity in silicon

    Schaffar, G. J. K., Tscharnuter, D. & Maier-Kiener, V., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    Understanding the fracture behaviour of 2D/3D ceramic architectures with tailored microstructures

    Schlacher, J. C., 2024

    Research output: Thesis › Doctoral Thesis

  20. Published

    Untersuchung möglicher Anlassversprödung in perlitischen Stählen mit erhöhten Gehalten an Spurenelementen

    Stockinger, L.-M., 2024

    Research output: Thesis › Master's Thesis

  21. Published

    Using lab-XRD to verify successful electrochemical hydrogen charging for in-situ nanoindentation

    Jelinek, A., Zeiler, S. & Maier-Kiener, V., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  22. 2023
  23. E-pub ahead of print

    Hierarchical Surface Pattern on Ni‐Free Ti‐Based Bulk Metallic Glass to Control Cell Interactions

    Cai, F., Blanquer, A., Costa, M. B., Schweiger, L., Sarac, B., Greer, A. L., Schroers, J., Teichert, C., Nogués, C., Spieckermann, F. & Eckert, J., 18 Dec 2023, (E-pub ahead of print) In: Small. 29.2024, 22, 12 p., 2310364.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Nanomechanical characterization

    Kiener, D. & Misra, A., 18 Dec 2023, In: MRS Bulletin. 49.2024, March, p. 214-223 10 p.

    Research output: Contribution to journal › Review article › peer-review

  25. Published

    Large mechanical properties enhancement in ceramics through vacancy-mediated unit cell disturbance

    Chen, Z., Huang, Y., Koutná, N., Gao, Z., Sangiovanni, D., Fellner, S., Haberfehlner, G., Jin, S., Mayrhofer, P. H., Kothleitner, G. & Zhang, Z., 16 Dec 2023, In: Nature Communications. 14.2023, 1, 11 p., 8387.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Influence of MnS inclusion characteristics on generation of white etching cracks in 100Cr6 bearing steel

    Srikakulapu, K., Morsdorf, L., Gonzalez, I., Kölling, M., Broß, C., Ponge, D., Herbig, M. & Mayweg, D., 15 Dec 2023, In: Wear. 534-535.2023, 15 December, 16 p., 205129.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Microalloying as a strategy to modulate antibacterial ion release from metallic glasses

    Londoño, J. J., Costa, M. B., Cai, F.-F., Spieckermann, F., Levesque, A., Prades-Rödel, S., Greer, A. L., Eckert, J. & Blatter, A., 15 Dec 2023, In: Journal of alloys and compounds. 968.2023, 15 December, 11 p., 172121.

    Research output: Contribution to journal › Article › Research › peer-review

  28. E-pub ahead of print

    W18O49 Nanowhiskers Decorating SiO2 Nanofibers: Lessons from in situ SEM/TEM growth to large scale synthesis and fundamental structural understanding

    Kundrat, V., Bukvisova, K., Novak, L., Prucha, L., Houben, L., Zalesak, J., Vukusic, A., Holec, D., Tenne, R. & Pinkas, J., 5 Dec 2023, (E-pub ahead of print) In: Crystal growth & design. 24.2024, 1, p. 378-390 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Uniform strain high-pressure torsion (US-HPT): an approach to reduce strain gradients

    Hohenwarter, A. & Wurster, S., 3 Dec 2023, In: Journal of materials science. 59.2024, April, p. 6048-6058 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Radionuclide removal from aqueous solutions using oxidized carbon fabrics

    Ioannidis, I., Pashalidis, I., Mulla, B., Kotanidis, G., Ioannou, K., Constantinides, G., Kostoglou, N. & Rebholz, C., 2 Dec 2023, In: Materials. 16.2023, 23, 16 p., 7479.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    A correlative experimental and theoretical investigation of phase formation and thermal stability of a quaternary Cr0.69Ta0.20B0.11N coating

    Kainz, C., Patterer, L., Bogdanovski, D., Salman, S. A., Letofsky-Papst, I., Pohler, M., Czettl, C., Schneider, J. M., Mitterer, C. & Schalk, N., Dec 2023, In: Materialia. 32.2023, December, 9 p., 101931.

    Research output: Contribution to journal › Article › Research › peer-review

  32. E-pub ahead of print

    Effect of sigma (σ) phase precipitation on the recrystallization kinetics of AISI 904L superaustenitic stainless steel

    Sohrabi, M. J., Roostaei, M., Mirzadeh, H., Spieckermann, F., Geranmayeh, A. R. & Mahmudi, R., 28 Nov 2023, (E-pub ahead of print) In: Vacuum. 220.2024, February, 112830.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Is it meaningful to quantify vacancy concentrations of nanolamellar (Ti,Al)N thin films based on laser-assisted atom probe data?

    Hans, M., Tkadletz, M., Primetzhofer, D., Waldl, H., Schiester, M., Bartosik, M., Czettl, C., Schalk, N., Mitterer, C. & Schneider, J. M., 25 Nov 2023, In: Surface & coatings technology. 473.2023, 25 November, 11 p., 130020.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Rejuvenation engineering in metallic glasses by complementary stress and structure modulation

    Şopu, D., Spieckermann, F., Bian, X., Fellner, S., Wright, J., Cordill, M., Gammer, C., Wang, G., Stoica, M. & Eckert, J., 24 Nov 2023, In: NPG Asia Materials. 2023, 15, 9 p., 61.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    sqsgenerator

    Holec, D. (Producer), Gehringer, D. (Producer) & Friák, M. (Producer), 21 Nov 2023

    Research output: Non-textual form › Software › Transfer

  36. Published

    Precipitation behaviour in AlMgZnCuAg crossover alloy with coarse and ultrafine grains

    Willenshofer, P., Tunes, M. A., Kainz, C., Renk, O., Kremmer, T., Gneiger, S., Uggowitzer, P. & Pogatscher, S., 15 Nov 2023, In: Materials Research Letters. 11.2023, 12, p. 1063-1072 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Strain-induced clustering in Al alloys

    Aster, P., Dumitraschkewitz, P., Uggowitzer, P., Schmid, F., Falkinger, G., Strobel, K., Kutleša, P., Tkadletz, M. & Pogatscher, S., 11 Nov 2023, In: Materialia. 32.2023, December, 7 p., 101964.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Deformation and failure behavior of nanocrystalline WCu

    Burtscher, M., Alfreider, M., Kainz, C. & Kiener, D., 6 Nov 2023, In: Materials Science and Engineering A. 887.2023, 6 November, 9 p., 145760.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    In-situ microscopy methods for imaging high-temperature microstructural processes – Exploring the differences and gaining new potentials

    Lumper, L., Schaffar, G. J. K., Sommerauer, M. & Maier-Kiener, V., 6 Nov 2023, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 887.2023, 6 November, 9 p., 145738.

    Research output: Contribution to journal › Article › Research › peer-review

  40. E-pub ahead of print

    Controlling the Glassy State toward Structural and Mechanical Enhancement: Additive Manufacturing of Bulk Metallic Glass Using Advanced Laser Beam Shaping Technology

    Hadibeik Neishaboori, S., Ghasemi‐Tabasi, H., Burn, A., Lani, S., Spieckermann, F. & Eckert, J., 3 Nov 2023, (E-pub ahead of print) In: Advanced functional materials. 34.2024, 12, 15 p., 2311118.

    Research output: Contribution to journal › Article › Research › peer-review

  41. E-pub ahead of print

    In-situ X-ray diffraction study of the oxidation behavior of arc-evaporated TiAlSiN coatings with low Al contents

    Moritz, Y., Saringer, C., Tkadletz, M., Fian, A., Czettl, C., Pohler, M. & Schalk, N., 3 Nov 2023, (E-pub ahead of print) In: Surface & coatings technology. 475.2023, 25 December, 10 p., 130161.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Emissivity measurements conducted on intermetallic γ-TiAl-based alloys for aeronautical applications

    Usategui, L., López-Ferreno, I., Echániz, T., Sainz-Menchón, M., Musi, M., Clemens, H. & López, G. A., 1 Nov 2023, In: Journal of Materials Research and Technology. 27.2023, November-December, p. 3170-3179 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Reactively-sputtered super-hydrophilic ultra-thin titania films deposited at 120°C

    Kaidatzis, A., Mouti, N.-M., Arfanis, M., Papadimitropoulos, G., Mitterer, C., Falaras, P. & Giannakopoulos, K., 1 Nov 2023, In: Materials Research Express : MRX. 10.2023, 11, 9 p., 115501.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Structure and cryogenic mechanical properties of severely deformed nonequiatomic alloys of Fe–Mn–Co–Cr system

    Tabachnikova, E. D., Hryhorova, T. V., Smirnov, S. N., Kolodiy, I. V., Shapovalov, Y. O., Levenets, A. V., Shumilin, S. E., Kashuba, I. V., Tikhonovsky, M. A., Spieckermann, F., Zehetbauer, M. J., Schafler, E., Huang, Y. J. & Langdon, T. G., 1 Nov 2023, In: Low temperature physics. 49.2023, 11, p. 1423-1434 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. E-pub ahead of print

    From unlikely pairings to functional nanocomposites: FeTi–Cu as a model system

    Schweiger, L., Kiener, D., Burtscher, M., Schafler, E., Mori, G. K., Spieckermann, F. & Eckert, J., 17 Oct 2023, (E-pub ahead of print) In: Materials today advances. 2023, 20, 13 p., 100433.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Highly textured 3D-printed translucent alumina through pressure-assisted sintering

    Nečina, V., Hofer, A.-K., Bermejo, R. & Pabst, W., 12 Oct 2023, In: Open ceramics. 16.2023, December, 6 p., 100487.

    Research output: Contribution to journal › Article › Research › peer-review

  47. E-pub ahead of print

    Multiple transition temperature enhancement in superconducting TiNbMoTaW high entropy alloy films through tailored N incorporation

    Pristáš, G., Gruber, G., Orendáč, M., Bačkai, J., Kačmarčík, J., Košuth, F., Gabáni, S., Szabó, P., Mitterer, C. & Flachbart, K., 12 Oct 2023, (E-pub ahead of print) In: Acta materialia. 262.2024, 1 January, 8 p., 119428.

    Research output: Contribution to journal › Article › Research › peer-review

  48. E-pub ahead of print

    Fabrication of bulk delta-phase Zirconium Hydride from Zircaloy-4 for use as moderators in microreactors

    Parkison, D., Tunes, M., Nizolek, T. J., Saleh, T. A., Hosemann, P. M. & Kohnert, C., 10 Oct 2023, (E-pub ahead of print) In: Scripta Materialia. 239.2024, 15 January, 7 p., 115771.

    Research output: Contribution to journal › Article › Research › peer-review

  49. E-pub ahead of print

    High-temperature microstructure evolution of an advanced intermetallic nano-lamellar γ-TiAl-based alloy and associated diffusion processes

    Nó, M. L., Klein, T., Clemens, H. & San Juan, J. M., 4 Oct 2023, (E-pub ahead of print) In: Acta materialia. 261.2023, 1 December, 13 p., 119380.

    Research output: Contribution to journal › Article › Research › peer-review

  50. E-pub ahead of print

    Precipitation behavior of hexagonal carbides in a C containing intermetallic γ-TiAl based alloy

    Burtscher, M., Weißensteiner, I., Wartbichler, R., Kirchheimer, K., Bernhard, C., Kiener, D. & Clemens, H., 4 Oct 2023, (E-pub ahead of print) In: Journal of alloys and compounds. 2023, 969, 7 p., 172400.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Metal–Matrix Composites from High-Pressure Torsion with Functionalized Material Behavior

    Lemkova, V., Todt, J., Motz, C. & Schaefer, F., Oct 2023, In: Advanced Engineering Materials. 25.2023, 20, 12 p., 2201565.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Nanoscale printed tunable specimen geometry enables high-throughput miniaturized fracture testing

    Jelinek, A., Žák, S., Cordill, M. J., Kiener, D. & Alfreider, M., Oct 2023, In: Materials and Design. 2023, 234, 17 p., 112329.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...110 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9/1.UG, 8700 Leoben