Chair of Polymer Processing (350)

Organisational unit: Chair

401 - 500 out of 946Page size: 100

Research output

  1. 2016
  2. Published

    Effect of Compounding Method on Rheological, Thermal and Mechanical Behavior of Blast Furnace Slag Filled Polystyrene Compounds

    Mostafa, H., Pacher, G., Lucyshyn, T., Holzer, C., Flachberger, H., Krischey, E., Fritz, B. & Laske, S., 27 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  3. Published

    Nanocomposites and filled Polymers

    Holzer, C., 27 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  4. Published

    Simulation of the Influence of Thermal Properties of the Mould Steel on the Injection Moulding Process

    Holzer, C., Lucyshyn, T. & Des Enffans D'Avernas, L.-V., 27 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  5. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 25 Jul 2016, p. 299. 1 p.

    Research output: Contribution to conference › Abstract

  6. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 25 Jul 2016, 32nd International Conference of the POLYMER PROCESSING SOCIETY. Maazouz, A. (ed.). Lyon, France, Vol. 32. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Upcycling of POM for Catch Springs by Using the Rec2TecPart Process

    Katschnig, M. & Holzer, C., 25 Jul 2016, The Digital Book of Abstracts. 32nd International Conference of the POLYMER PROCESSING SOCIETY, p. 287 S16-623

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Erfahrungsbericht/H2020-Factories of the Future Projekt REProMag: Resource Efficient Production of Magnets

    Schuschnigg, S., 8 Jun 2016.

    Research output: Contribution to conference › Presentation › Transfer

  9. Published

    Models to Predict the Viscosity of Metal Injection Molding Feedstock Materials as Function of Their Formulation

    Gonzalez-Gutierrez, J., Duretek, I., Kukla, C., Poljšak, A., Bek, M., Emri, I. & Holzer, C., 28 May 2016, In: Metals : open access journal . 6.2016, 6, p. 129-146 17 p., 129.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Instrumented injection mold for the measurement of demolding energies of micro-structured parts

    Holzer, C., 20 May 2016.

    Research output: Contribution to conference › Presentation › Research

  11. Published

    Rheometry of Polymer Melt using Processing Machines

    Friesenbichler, W., Neunhäuserer, A. & Duretek, I., 19 May 2016, p. 2-5. 4 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  12. Published

    Entwicklung von Polyolefinen für den Fused Filament Fabrication (FFF) Prozess

    Spörk, M., Schuschnigg, S. & Holzer, C., 14 May 2016.

    Research output: Contribution to conference › Poster › Research

  13. Published

    MaP "Additive Manufacturing" Lecture Series - Polymer-Implants

    Holzer, C., 26 Apr 2016.

    Research output: Contribution to conference › Presentation › Education

  14. Published

    Einfluss des relativen Druckwinkels auf die Oberflächentopologie von mittels FFF-Technik 3D-gedruckten Bauteilen

    Haar, B., Walluch, M., Anna, U., Katschnig, M. & Holzer, C., 14 Apr 2016, p. 191-192. 2 p.

    Research output: Contribution to conference › Poster › Research

  15. Published

    Entwicklung von Polyolefinen für den Fused Filament Fabrication Prozess

    Spörk, M., Schuschnigg, S. & Holzer, C., 14 Apr 2016, p. 203-204. 210 p.

    Research output: Contribution to conference › Abstract

  16. Published

    Fused Filament Fabrication for Metallic Parts

    Gonzalez-Gutierrez, J., Kukla, C., Schuschnigg, S., Duretek, I. & Holzer, C., 14 Apr 2016, 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung- vom Werkstoff zum Produkt. Pinter, G. & Pilz, G. (eds.). Leoben, Austria, Vol. 25. p. 187-188 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Haftungsvorhersage und Haftungsverbesserung im Fused Filament Fabrication (FFF) Prozess

    Schuschnigg, S., Huber, P., Holzer, C. & Spörk, M., 14 Apr 2016.

    Research output: Contribution to conference › Poster › Research

  18. Published

    Haftungsvorhersage und Haftungsverbesserung im Fused Filament Fabrication (FFF) Prozess

    Schuschnigg, S., Huber, P., Spörk, M. & Holzer, C., 14 Apr 2016, p. 201. 2 p.

    Research output: Contribution to conference › Abstract

  19. Published

    iPrint - Personalisierte Kranialimplantate mittels Fused Filament Fabrication

    Katschnig, M., Haar, B., Holzer, C., Ücal, M., Schäfer, U., von Campe, G. & Zefferer, U., 14 Apr 2016, 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt. Leoben, Vol. 06. p. 121-125 5 p. (Schriftenreihe Kunststofftechnik Leoben).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Neue additive Produktionstechnologien für die Holzindustrie

    Duretek, I., Müller, U., Veigel, S., Haider, A., Frybort, S. & Holzer, C., 14 Apr 2016, p. 185-186. 2 p.

    Research output: Contribution to conference › Abstract

  21. Published

    Neue additive Produktionstechnologien für die Holzindustrie

    Duretek, I., Müller, U., Veigel, S., Haider, A., Frybort, S. & Holzer, C., 14 Apr 2016. 1 p.

    Research output: Contribution to conference › Poster › Research

  22. Published

    Rec2TecPart - Ein neuer Prozess für Funktionsbauteile aus Sekundärrohstoffen

    Katschnig, M., Brendinger, C. & Holzer, C., 14 Apr 2016, p. 193-194. 2 p.

    Research output: Contribution to conference › Poster › Research

  23. Published

    Fused Filament Fabrication for Metallic Parts

    Gonzalez-Gutierrez, J., Kukla, C., Schuschnigg, S., Duretek, I. & Holzer, C., Apr 2016, p. 1.

    Research output: Contribution to conference › Poster › Research

  24. Published

    Biocompatibility of FDM printed PEEK is comparable to cranial bone properties; FDM printed PEEK is thereby a suitable material for cranial implants

    Schäfer, U., von Campe, G., Ücal, M., Tax, A., Katschnig, M. & Holzer, C., 30 Mar 2016, Front. Bioeng. Biotechnol. Conference Abstract: 10th World Biomaterials Congress.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Durchgängige Simulationskette von der Konstruktion bis zur Spannungsbewertung

    Mösenbacher, A., Lucyshyn, T., Pußwald, S. & Primetzhofer, A., 15 Mar 2016, p. 1. 28 p.

    Research output: Contribution to conference › Presentation › Research

  26. Published

    Neue Materialien im Fused Filament Fabrication (FFF) Verfahren

    Schuschnigg, S., 11 Mar 2016.

    Research output: Contribution to conference › Presentation › Transfer

  27. Published

    Kunststoffe - Fluch oder Segen?

    Lucyshyn, T., 3 Mar 2016.

    Research output: Contribution to conference › Presentation › Research

  28. Published

    Grundlage für eine erfolgreiche Verarbeitung - genaue Materialkenntisse

    Holzer, C., 2 Mar 2016.

    Research output: Contribution to conference › Presentation › Research

  29. Published

    Die Faserorientierung auf dem Prüfstand – Hinterfragung der Erwartungshaltung in der Lebensdauerabschätzung

    Mösenbacher, A., Müller, F., Primetzhofer, A. & Lucyshyn, T., 26 Feb 2016. 16 p.

    Research output: Contribution to conference › Presentation › Research

  30. Published

    Simulation des Einflusses der thermischen Eigenschaften des Werkzeugstahls auf den Spritzgießprozess

    Lucyshyn, T., 26 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  31. Published

    Wetting behavior of polymer melts on coated and uncoated tool steel surfaces

    Zitzenbacher, G., Huang, Z., Längauer, M., Forsich, C. & Holzer, C., 16 Feb 2016, In: Journal of Applied Polymer Science. 133.2016, 21, 10 p., 43469.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Auswirkung der Materialeigenschaften von ungefüllten und holzgefüllten Biopolymeren für die Anwendung von Fused Filament Fabrication

    Mooslechner, P., 2016

    Research output: Thesis › Master's Thesis

  33. Published

    Compoundierung von Filamenten für medizinische FFF-Anwendungen

    Payr, B., 2016

    Research output: Thesis › Master's Thesis

  34. Published

    Coupled Orientation and Stretching of Chains in Mesoscale Models of Polydisperse Linear Polymers in Startup of Steady Shear Flow Simulations

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2016, In: Macromolecular Theory and Simulations.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Dissipative Particle Dynamics Models of Orientation of Weakly-Interacting Anisometric Silicate Particles in Polymer Melts under Shear Flow: Comparison with the Standard Orientation Models

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2016, In: Macromolecular Theory and Simulations.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Dissipative particle dynamics simulations of orientation of layered silicate particles embedded in polymer melts under shear flows

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2016, In: AIP Conference Proceedings. 050010.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Filling Behavior of Wood Plastic Composites

    Duretek, I., Lucyshyn, T. & Holzer, C., 2016, In: Journal of Civil Engineering and Architecture. 10, p. 1236-1243 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Improvement of the physical-mechanical and optical properties of the packaging production through coating with aqueous polymer dispersion in accordance with the environmental protection requirements

    Bozhkova, T., Boeva, R., Spiridonov, I., Nedelchev, Y., Sapkota, J., Kašiković, N., Dedijer, S. & Pal, M., 2016.

    Research output: Contribution to conference › Poster › Research

  39. Published

    Non-Contact Measurement of Circular Surfaces via Photometric Stereo in Polar Coordinates

    Radler, B., Harker, M., O'Leary, P. & Lucyshyn, T., 2016

    Research output: Other contribution › Research

  40. Published

    Optimierte Entformung mikrostrukturierter Spritzgussbauteile durch Werkzeugbeschichtungen

    Windischbauer, L., 2016

    Research output: Thesis › Master's Thesis

  41. Published

    Optimization of twin screw extrusion using CFD for polymer/nanoclay composites

    Schuschnigg, S., Battisti, M., Winkler-Ebner, J., Friesenbichler, W. & Holzer, C., 2016, In: AIP Conference Proceedings.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Rheometry of polymer melts using processing machines

    Friesenbichler, W., Neunhäuserer, A. & Duretek, I., 2016, In: Korea-Australia Rheology Journal. 28, 3, p. 167-174 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Rheometry of Polymer Melt using Processing Machines

    Friesenbichler, W., Neunhäuserer, A. & Duretek, I., 2016, The 16th Internaional Symposium on Applied Rheology (ISAR). Korea, p. 2-5 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Structure of Polypropylene Macromolecules in the Vicinity of Fe2O3 Surface

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2016.

    Research output: Contribution to conference › Poster › Research

  45. Published

    Structure of Polypropylene Macromolecules in the Vicinity of Fe2O3 Surface

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2016, p. 189. 190 p.

    Research output: Contribution to conference › Abstract

  46. Published

    Study of the formation of globule-like surface microstructures on polyacrylamide nano-films synthesized via electro-polymerization process

    Shahsavan, F., Gooneie, A., Shoja Chaykar, A., Shahkaram, M. & Eslami, H., 2016, In: AIP Conference Proceedings. 110002.

    Research output: Contribution to journal › Article › Research › peer-review

  47. 2015
  48. Published

    Enhancing the temperature stability of PLA by compounding strategies

    Laske, S., Ziegler, W., Kainer, M., Wuerfel, J. & Holzer, C., 1 Dec 2015, In: Polymer engineering and science. 55, 12, p. 2849-2858 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Study of rheological behaviour of stainless steel feedstock taking into account the thermal effects

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J., Gooneie, A. & Holzer, C., 30 Nov 2015, IBEREO’15 IBERIAN RHEOLOGY CONFERENCE. Rasteiro, M. G. (ed.). Coimbra, Portugal: Universidad Nacional de Colombia, p. 50-53 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Fließverhalten hochgefüllter Kunststoffe

    Duretek, I., 26 Nov 2015, 24. Leobener Kunststoff-Kolloquium. Leoben, p. 57-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Apparatus for measuring friction inside granular materials— Granular friction analyzer

    Bek, M., Gonzalez-Gutierrez, J., Moreno Lopez, J. A., Bregant, D. & Emri, I., 24 Nov 2015, In: Powder technology : an international journal on the science and technology of wet and dry particulate systems. 288, 2016, p. 255-265 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Effect of selective localization of carbon nanotubes in pa6 dispersed phase of PP/PA6 blends on the morphology evolution with time, part 2: Relaxation of deformed droplets after cessation of flow

    Gooneie, A., Nazockdast, H. & Shahsavan, F., 12 Oct 2015, In: Polymer engineering and science. 56.2016, 1, p. 51-60 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Filling behaviour of wood plastic composites

    Duretek, I., 7 Oct 2015, p. 47. 1 p.

    Research output: Contribution to conference › Presentation › Research

  54. Published

    Filling behaviour of wood plastic composites

    Duretek, I., Lucyshyn, T. & Holzer, C., 7 Oct 2015, p. 47. 1 p.

    Research output: Contribution to conference › Abstract

  55. Published

    Material data for numerical simulation of powder in jection molding

    Duretek, I., 6 Oct 2015, p. 154. 1 p.

    Research output: Contribution to conference › Presentation › Research

  56. Published

    Viscosity and creep compliance of polyoxymethylene copolymers of various average molecular weights

    Gonzalez-Gutierrez, J., Oblak, P., Megen, Z. & Emri, I., Oct 2015, In: Polimery/Polymers. 2015, 10, p. 620-627 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Orientation of Anisometric Layered Silicate Particles in Uncompatibilized and Compatibilized Polymer Melts under Shear Flow: A Dissipative Particle Dynamics Study

    Gooneie, A., Schuschnigg, S. & Holzer, C., 29 Sept 2015, In: Macromolecular Theory and Simulations. 25.2016, 1, p. 85-98 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Influence of the relative printing angle on surface topography of 3d printed parts manufactured by fff technique

    Haar, B., Walluch, M., Katschnig, M. & Holzer, C., 23 Sept 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  59. Published

    Optimization of Twin Screw Extrusion using CFD for Polymer/Nanoclay Composites: Polymer Processing Society Regional Conference Graz 2015 Book of Abstracts

    Schuschnigg, S., Battisti, M., Winkler-Ebner, J., Friesenbichler, W. & Holzer, C., 21 Sept 2015, p. 182.

    Research output: Contribution to conference › Abstract

  60. Published

    Rheological Behaviour of Bronze Feedstocks at Low Shear Rates

    Kukla, C., Duretek, I., Gonzalez-Gutierrez, J. & Holzer, C., 14 Sept 2015, Euro PM2015 Congress Proceedings. Reims, France: European Powder Metallurgy Association, 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Measurement of interdiffusion in polymeric materials by applying Raman spectroscopy

    Bruckmoser, K., Resch, K., Kisslinger, T. & Lucyshyn, T., Sept 2015, In: Polymer Testing. 46, p. 122-133 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Cartucho explosivo

    Moser, P. (Inventor), Bauer, F. (Inventor), Friesenbichler, W. (Inventor), Fertschej, A. (Inventor) & Schatzer, R. (Inventor), 25 Jun 2015, IPC No. F42D 1/ 10 A I, Patent No. ES2538987T, Priority date 25 Mar 2011, Priority No. WO2011EP54635

    Research output: Patent

  63. Published

    Weld line improvement of short fiber reinforced thermoplastics with a movable flow obstacle

    Janko, M., Spiegl, B., Kaufmann, A., Lucyshyn, T. & Holzer, C., 15 Jun 2015, In: Journal of Applied Polymer Science. 132, 23, p. 1-12 12 p., 42025.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Effect of selective localization of carbon nanotubes in PA6 dispersed phase of PP/PA6 blends on the morphology evolution with time, part 1: Droplet deformation under simple shear flows

    Gooneie, A., Nazockdast, H. & Shahsavan, F., 7 May 2015, In: Polymer engineering and science. 55.2015, July, p. 1504-1519 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Correlation between Rheotens measurements and reinforcement of polymer nanocomposites in the injection molding compounder

    Battisti, M. G., Friesenbichler, W., Duretek, I. & Guttmann, P., 15 Apr 2015, In: Journal of physics / Conference series. 602, 1, 012012.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Halogenfrei flammgehemmte Polyolefin-Compounds

    Mattausch, H., 15 Apr 2015.

    Research output: Contribution to conference › Presentation › Research

  67. Published

    流動性基材で作製される部品の製造を制御するための音響ノイズ感知

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Müller, F. (Inventor) & Rath, G. (Inventor), 26 Mar 2015, IPC No. B29C 45/ 76 A I, Patent No. JP2015509054, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  68. Published

    ACOUSTIC NOISE SENSING FOR CONTROLLING MANUFACTURE OF A COMPONENT PART MADE OF A FLOWABLE BASE MATERIAL

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor) & Muller, F. (Inventor), 29 Jan 2015, IPC No. B29C 45/ 76 A I, Patent No. US2015028507, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  69. Published

    Chemical/physical preprocessing of nanoclay particles

    Riess, G. & Schauberger, J., 8 Jan 2015, Polymer Nanoclay Composites. Elsevier, p. 27-51 25 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  70. Published

    Processability and mechanical properties of extensively recycled high density polyethylene

    Oblak, P., Gonzalez-Gutierrez, J., Zupančič, B., Aulova, A. & Emri, I., 1 Jan 2015, In: Polymer Degradation and Stability. 114, p. 133-145 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Analysis on factors affecting the demolding of micro-structured devices in the injection molding process

    Strohmayer, B., 2015, 102 p.

    Research output: Thesis › Master's Thesis

  72. Published

    Besondere Aspekte bei der Herstellung mikrostrukturierter Spritzgussteile

    Lucyshyn, T., Struklec, T., Burgsteiner, M., Graninger, G. & Holzer, C., 2015, Schriftenreihe Kunststofftechnik Leoben: 24. Leobener Kunststoff-Kolloquium. Leoben, Vol. 05. p. 198-207 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Demolding of micro-structured surfaces in the injection molding process

    Struklec, T., 2015

    Research output: Thesis › Doctoral Thesis

  74. Published

    Development of halogen-free flame retardant polypropylene compounds for pipe application

    Mattausch, H., 2015

    Research output: Thesis › Doctoral Thesis

  75. Published

    Dissipative Particle Dynamics Simulations of Orientation of Layered Silicate Particles Embedded in Polymer Melts under Shear Flows

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2015, Abstract from PPS2015 - Polymer Processing Society Conference 2015, Graz, Austria. p. 144

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Dissipative Particle Dynamics Simulations of Orientation of Layered Silicate Particles Embedded in Polymer Melts under Shear Flows

    Gooneie, A., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  77. Published

    Effect of Chain Length on the Rheology of Dissipative Particle Dynamics Models of Polymer Fluids

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2015, Danube Vltava Sava Polymer Meeting - DVSPM 2015, Proceedings of a Conference on Polymer Science.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Effect of Chain Length on the Rheology of Dissipative Particle Dynamics Models of Polymer Fluids

    Gooneie, A., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  79. Published

    Grafting of vinyl phosphoric acid monomers for the crosslinking of polypropylene

    Mattausch, H., Spörk, M., Rieß, G. & Holzer, C., 2015.

    Research output: Contribution to conference › Poster › Research

  80. Published

    Grafting of vinyl phosphoric acid monomers for the crosslinking of polypropylene

    Mattausch, H., Spörk, M., Rieß, G. & Holzer, C., 2015, PPS Graz - Konferenzbeitrag.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    Influence of Supercritical Carbon Dioxide on TPE based Composites

    Gallaun, U., 2015, Conference Proceedings: 30th International Conference of the Polymer Processing Society. Cleveland, p. 525-525

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Kinetics and mechanism of the biodegradation of PLA/clay nanocomposites during thermophilic phase of composting process

    Stloukal, P., Pekarova, S., Kalendova, A., Mattausch, H., Laske, S., Holzer, C., Chitu, L., Bodner, S., Maier, G., Slouf, M. & Koutny, M., 2015, In: Waste management. 42, p. 31-40 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Multiscale Simulation of Polymer Nanocomposites in Processing: Challenges and Outlooks

    Gooneie, A., Mattausch, H., Witschnigg, A., Schuschnigg, S. & Holzer, C., 2015, Material Forming ESAFORM 2015: Selected, peer reviewed papers from the 18th International ESAFORM Conference on Material Forming (ESAFORM 2015), April 15-17, 2015, Graz, Austria.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Multiscale Simulation of Polymer Nanocomposites in Processing: Challenges and Outlooks

    Gooneie, A., Mattausch, H., Witschnigg, A., Schuschnigg, S. & Holzer, C., 2015, Key engineering materials. Vol. 651-653. p. 533-538 6 p. (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  85. Published

    Neuentwicklung eines Tauchcomputers mit berührungssensitivem Display

    Thallinger, F., 2015

    Research output: Thesis › Master's Thesis

  86. Published

    Numerical simulations of the flow of wood polypropylene composites with wall slipping in a profile die: The significance of material data

    Gooneie, A., Schuschnigg, S., Duretek, I. & Holzer, C., 2015, In: AIP Conference Proceedings. 1664, 1

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Optimization of the injection molding technology for profiled high-performance thermoplastic sealing elements

    Janko, M., 2015

    Research output: Thesis › Doctoral Thesis

  88. Published

    Polymer Nanoclay Composits: Processing of polymer-nanoclay composits (Chapter 3)

    Katschnig, M. & Battisti, M., 2015, Elsevier. (Micro & Nano Technologies Series)

    Research output: Book/Report › Anthology › Research

  89. Published

    Research in manufacturing of micro-structured injection molded polymer parts

    Lucyshyn, T., Struklec, T., Burgsteiner, M., Graninger, G. & Holzer, C., 2015, AIP Conference Proceedings. Vol. 1695. p. 1-9 9 p. 020014

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Rheological properties of wood polymer composites and their role in extrusion

    Duretek, I., Schuschnigg, S., Gooneie, A., Langecker, G. & Holzer, C., 2015, In: Journal of physics / Conference series. 602, 1, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Rheologie für den Kunststoffverarbeiter

    Duretek, I., 2015, VDI Wissensforum - EXTRUSIONSWERKZEUGE FÜR PROFILE UND ROHRE (03FO010005), 29. und 30. September 2015. Karlsruhe, 25 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. Published

    Rheology of Polymer-layered Silicate Nanocomposites in Steady-Shear Flows: A Dissipative Particle Dynamics Study

    Gooneie, A., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  93. Published

    Rheology of Polymer-layered Silicate Nanocomposites in Steady-Shear Flows: A Dissipative Particle Dynamics Study

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2015, The 2nd International Conference on Rheology and Modeling of Materials, Book of abstracts. p. 51

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Simulation Aided Twin Screw Optimization for Polymer Nanoclay Composites

    Schuschnigg, S., Battisti, M., Joachim, W.-E., Friesenbichler, W. & Holzer, C., 2015, Danube Vltava Sava Polymer Meeting-DVSPM 2015 : Proceedings of a Conference on Polymer Science. Linz, p. 88 O13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Study of the Formation of Globule-like Surface Microstructures on Polyacrylamide Nano-films Synthesized via Electro-polymerization Process

    Shahsavan, F., Gooneie, A., Shoja Chaykar, A., Shahkaram, M. & Eslami, H., 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  96. Published

    Study of the Formation of Globule-like Surface Microstructures on Polyacrylamide Nano-films Synthesized via Electro-polymerization Process

    Gooneie, A., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  97. Published

    The mold in the focus of research for improved quality of injection molded parts

    Lucyshyn, T., 2015

    Research output: Thesis › Habilitation thesis › peer-review

  98. 2014
  99. Published

    MESSUNG VON AKUSTISCHEM RAUSCHEN ZUR STEUERUNG DER HERSTELLUNG EINES BAUTEILS AUS EINEM FLIESSFÄHIGEN GRUNDMATERIAL

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor), Müller, F. (Inventor), Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor) & Müller, F. (Inventor), 3 Dec 2014, IPC No. G01N 29/ 46 A I, Patent No. EP2807011, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  100. Published

    Recycling of Borehole Solids in Polymers

    Hofstätter, H. (Inventor) & Holzer, C. (Inventor), 20 Nov 2014, IPC No. C08K 5/ 00 A I, Patent No. US2014343219, Priority date 14 Sept 2012, Priority No. WO2012EP68165

    Research output: Patent

  101. Published

    Acoustic noise sensing for controlling manufacture of a component part made of a flowable base material

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor) & Mueller, F. (Inventor), 12 Nov 2014, IPC No. B29C 45/ 76 A I, Patent No. CN104144778, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  102. Published

    ACOUSTIC NOISE SENSING FOR CONTROLLING MANUFACTURE OF A COMPONENT PART MADE OF A FLOWABLE BASE MATERIAL

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor) & Mueller, F. (Inventor), 8 Oct 2014, IPC No. B29C 45/ 76 A I, Patent No. KR20140119154, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  103. Published

    Selection of appropriate polyoxymethylene-based binder for powder injection molding feedstock

    Gonzalez-Gutierrez, J., 8 Sept 2014, In: Zeitschrift Kunststofftechnik : Journal of plastics technology. 10, 5, p. 150 164 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...10 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 3501