Chair of Polymer Processing (350)

Organisational unit: Chair

301 - 400 out of 946Page size: 100

Research output

  1. 2018
  2. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten für PP LGF

    Duretek, I., 16 May 2018, 26 p.

    Research output: Book/Report › Commissioned report › Research

  3. Published

    Polypropylene Filled With Glass Spheres in Extrusion‐Based Additive Manufacturing: Effect of Filler Size and Printing Chamber Temperature

    Spörk, M., Arbeiter, F., Raguž, I., Weingrill, G., Fischinger, T., Traxler, G., Schuschnigg, S., Cardon, L. & Holzer, C., 16 May 2018, In: Macromolecular materials and engineering. 303.2018, 7, 15 p., 1800179.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Material selection, testing and validation of additively manufactured components

    Wiener, J., Arbeiter, F., Spörk, M., Gosch, A. & Pinter, G. G., 9 May 2018.

    Research output: Contribution to conference › Paper › peer-review

  5. Published

    Optimisation of the Adhesion of Polypropylene-Based Materials during Extrusion-Based Additive Manufacturing

    Spörk, M., Gonzalez-Gutierrez, J., Lichal, C., Cajner, H., Berger, G., Schuschnigg, S., Cardon, L. & Holzer, C., 2 May 2018, In: Polymers. 10.2018, 5, 16 p., 490.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Cranial polyetheretherketone implants by extrusion–based additive manufacturing: state of the art and prospects

    Katschnig, M. & Holzer, C., 1 May 2018, In: Material Science & Engineering International Journal. 2.2018, 3, p. 66-68 3 p.

    Research output: Contribution to journal › Review article › peer-review

  7. Published

    Bestimmung der thermodynamischen und mechanischen Stoffdaten für ein PBT-Compound PBT GF 30

    Duretek, I., 27 Apr 2018, 16 p.

    Research output: Book/Report › Commissioned report › Research

  8. Published

    Herstellung eines thermoplastischen Blends und dessen rheologische und thermodynamische Analyse

    Duretek, I., 27 Apr 2018, 8 p.

    Research output: Book/Report › Commissioned report › Research

  9. Published

    Influence of filler treatment on the behavior of blast furnace slag filled polypropylene compounds

    Mostafa, A., Lucyshyn, T., Holzer, C., Flachberger, H., Öfner, W., Rieß, G. & Fritz, B., 23 Apr 2018, In: Journal of Applied Polymer Science. 135.2018, 31, p. 1-9 9 p., 46535.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Strukturbauteile aus dem 3D-Drucker: begleitende Werkstoffprüfung zur Eigenschaftsoptimierung

    Arbeiter, F., Wiener, J., Spörk, M. & Pinter, G. G., 20 Apr 2018, p. 1. 4 p.

    Research output: Contribution to conference › Paper

  11. Published

    Additiv gefertigte Hybridbauteile mittels dualer Direktextrusion

    Katschnig, M., 19 Apr 2018, Schriftenreihe Kunststofftechnik Leoben: 27 Leobner Kunststoffkolloquium "Print and Coat". Kern, W. (ed.). Leoben, Vol. 8. p. 177 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Entwicklungen im Bereich Fused Filament Fabrication

    Schuschnigg, S., Spörk, M. & Holzer, C., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben: Eigenverlag, Vol. 27. p. 19-34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Feedstocks for the Shaping-Debinding-Sintering Process of Multi Material Components

    Cano Cano, S., Kukla, C., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 19 Apr 2018, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  14. Published

    Feedstocks for the Shaping-Debinding-Sintering Process of Multi Material Components

    Cano Cano, S., Kukla, C., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben, Vol. 27. p. 255 -256 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Highly-filled Polymers for Fused Filament Fabrication

    Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Holzer, C. & Kukla, C., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben, Vol. 27. p. 93-102 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Material Extrusion Additive Manufacturing for Photocatalytic Applications

    Gonzalez-Gutierrez, J., Jiang, W., Lichal, C., Schuschnigg, S., Huang, L. & Holzer, C., 19 Apr 2018, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  17. Published

    Material Extrusion Additive Manufacturing for Photocatalytic Applications

    Gonzalez-Gutierrez, J., Jiang, W., Lichal, C., Schuschnigg, S., Huang, L. & Holzer, C., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben, Vol. 27. p. 259-260 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Polypropylene/Cellulose Composites for Material Extrusion Additive Manufacturing

    Kaynak, B., Spörk, M., Shirole, A., Ziegler, W. & Sapkota, J., 14 Apr 2018, In: Macromolecular materials and engineering. 303.2018, 5, 8 p., 1800037.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Influence of strand orientation on mechanical properties in near homogeneous FFF produced PLA parts

    Wiener, J., Arbeiter, F., Spörk, M., Gosch, A. & Pinter, G. G., 27 Mar 2018.

    Research output: Contribution to conference › Poster › Research

  20. Published

    Bestimmung der thermodynamischen Stoffdaten für ein TPU-Compound der Type

    Duretek, I., 13 Mar 2018, 11 p.

    Research output: Book/Report › Commissioned report › Research

  21. Published

    Bestimmung der rheologischen Stoffdaten für ein TPU-Compound mit Farbmasterbatch

    Duretek, I., 9 Mar 2018, 8 p.

    Research output: Book/Report › Commissioned report › Research

  22. Published

    Determination of the pvT-behaviour for two pharmaceutical mixtures

    Duretek, I. & Winkler, S., 15 Feb 2018, 6 p.

    Research output: Book/Report › Commissioned report › Research

  23. Published

    Bestimmung der thermodynamischen Stoffdaten für ein TPO-Compound

    Duretek, I., 8 Feb 2018, 8 p.

    Research output: Book/Report › Commissioned report › Research

  24. Published

    Reciclado de sólidos de orificios de perforación en polímeros

    Hofstätter, H. (Inventor) & Holzer, C. (Inventor), 16 Jan 2018, IPC No. C08K 3/ 34 A I, Patent No. ES2650001T, Priority date 14 Sept 2012, Priority No. WO2012EP68165

    Research output: Patent

  25. Published

    RECYCLING OF BOREHOLE SOLIDS IN POLYMERS

    Hofstätter, H. (Inventor) & Holzer, C. (Inventor), 13 Jan 2018, Patent No. NO2756028T, Priority date 14 Sept 2012, Priority No. WO2012EP68165

    Research output: Patent

  26. Published

    Fracture mechanical characterization and lifetime estimation of near-homogeneous components produced by fused filament fabrication

    Arbeiter, F., Spoerk, M., Wiener, J., Gosch, A. & Pinter, G., 5 Jan 2018, In: Polymer Testing. 66.2018, April, p. 105-113 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Optimisation of the Mechanical Properties and Processing of Polypropylene and Poly(Lactic Acid) Parts Produced by Extrusion-Based Additive Manufacturing

    Spörk, M., 2018

    Research output: Thesis › Doctoral Thesis

  28. 2017
  29. Published

    Calculation of the contact Angle of Polymer Melts on Tool Surfaces from Viscosity Parameters

    Zitzenbacher, G., Dirnberger, H., Längauer, M. & Holzer, C., 30 Dec 2017, In: Polymers. 10.2017, 38, 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Optimization of Mechanical Properties of Glass-Spheres-Filled Polypropylene Composites for Extrusion-Based Additive Manufacturing

    Spörk, M., Savandaiah, C., Arbeiter, F., Sapkota, J. & Holzer, C., 26 Dec 2017, In: Polymer Composites. 40.2019, 2, p. 638-651 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Special Binder Systems for Metal Powders in Highly Filled Filaments for Fused Filament Fabrication

    Gonzalez-Gutierrez, J., Cano Cano, S., Ecker, J., Arbeiter, F., Burkhardt, C., Hampel, S., Kukla, C. & Holzer, C., 14 Dec 2017, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  32. Published

    Special Binder Systems for the Use with Metal Powders for Highly Filled Filaments for Fused Filament Fabrication

    Gonzalez-Gutierrez, J., Kukla, C., Arbeiter, F. & Holzer, C., 14 Dec 2017, 33rd Annual Meeting of the Polymer Processing Society. Cancun, Mexico, Vol. 33. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Isotropic NdFeB hard magnets: MIM production using recycled powders with and without Nd additions

    Burkhardt, C., Weber, O., Podmiljsak, B., Gonzalez-Gutierrez, J., Kukla, C., Degri, M., Harris, I. R. & Walton, A., 1 Dec 2017, In: Powder injection moulding international. 11, 4, p. 75-81 7 p.

    Research output: Contribution to journal › Article › Research

  34. Published

    3D printing conditions determination for feedstock used in fused filament fabrication (FFF) of 17-4PH stainless steel parts

    Gonzalez-Gutierrez, J., Godec, D., Guran, R., Spörk, M., Kukla, C. & Holzer, C., 15 Nov 2017, In: Metalurgija : casopis Izdaje Tehnoloski Fakultet Sveucilista u Zagrebu, Odjeli u Sisku, Institut za Metalurgiju i Zeljezara Sisak = Metallurgy. 57.2018, 1-2, p. 117-120 4 p., 669.15:621.775:669.015:66.049.4:621.385.833=111.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Cellulose Nanocomposites: Fundamental Understanding of the Mechanical Reinforcement of Cellulose Nanocrystals Reinforced Polymer Nanocomposites as a Function of Aspect Ratio

    Sapkota, J., 15 Nov 2017, WerWasWo.Forschung@MUL 2017. Schuschnigg, S. (ed.). 6 ed. Leoben, Austria, p. 189 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer

  36. Published

    Feedstocks for metal injection moulding: Effect of particle charcateristics and binder composition on the rheological properties and the morphology of metal injection moulding feedstocks

    Kukla, C. & Gonzalez-Gutierrez, J., 15 Nov 2017, WerWasWo.Forschung@MUL 2017. Schuschnigg, S. (ed.). 6 ed. Leoben, Austria, p. 127 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer

  37. Published

    FFF Material und Prozess

    Schuschnigg, S., 15 Nov 2017, WerWasWo.Forschung@MUL 2017. Schuschnigg, S. (ed.). 6 ed. p. 200 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  38. Published

    Flexible Production via 3D Printing: Development of a sustainable, stable and flexible manufacturing process (3D printing) for complex metallic and ceramic components in a waste-free but industrially viable process

    Sapkota, J. & Gonzalez-Gutierrez, J., 15 Nov 2017, WerWasWo.Forschung@MUL 2017. Schuschnigg, S. (ed.). 6 ed. Leoben, Austria, p. 190 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer

  39. Published

    Resource Efficient Production of Magnets: Utilization of recycled rare earth magnetic material for the production of magnets with complex structure and geometry via additive manufacturing and metal injection moulding

    Gonzalez-Gutierrez, J. & Kukla, C., 15 Nov 2017, WerWasWo.Forschung@MUL 2017. Schuschnigg, S. (ed.). 6 ed. Leoben, Austria, p. 78 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer

  40. Published

    WerWasWo.Forschung@MUL 2017: Forschungsprojekte, vorgestellt anlässlich der Posterpräsentation WerWasWo.Forschung@MUL

    Schuschnigg, S., 15 Nov 2017, 6 ed. Leoben: Eigenverlag. 303 p.

    Research output: Book/Report › Anthology › Research

  41. Published

    Effect of the printing bed temperature on the adhesion of parts produced by fused filament fabrication

    Spörk, M., Gonzalez-Gutierrez, J., Sapkota, J., Schuschnigg, S. & Holzer, C., 8 Nov 2017, In: Plastics, rubber and composites. 47.2018, 1, p. 17-24 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Neues Werkzeug für die Messung der Entformungskräfte

    Lucyshyn, T. & Holzer, C., 1 Nov 2017, In: GAK : Gummi, Fasern, Kunststoffe. 11/2017, Jahrgang 70, p. 704-708 5 p.

    Research output: Contribution to journal › Article › Research

  43. Published

    Permeation of hydrocarbons through organosilane crosslinked LDPE

    Berger, K., Keimel, C., Helfer, E., Haar, B., Eder, A., Mattausch, H. & Riess, G., 20 Oct 2017, In: Journal of applied polymer science. 134.2017, 40, 8 p., 45374.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    The production of magnets by FFF - Fused Filament Fabrication

    Kukla, C., Gonzalez-Gutierrez, J., Burkhardt, C., Weber, O. & Holzer, C., 1 Oct 2017, Euro PM2017 Congress & Exhibition. Milan, Italy: European Powder Metallurgy Association, 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Differential apoptotic response of MC3T3-E1 pre-osteoblasts to biodegradable magnesium alloys in an in vitro direct culture model

    Bonyadi Rad, E., Mostofi, S., Katschnig, M., Schmutz, P., Pawelkiewicz, M., Willumeit-Römer, R., Schäfer, U. & Weinberg, A., 5 Sept 2017, In: Journal of materials science / Materials in medicine. 28.2017, 155, 11 p., 155.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    3D Printing of Polymer-Bonded Rare-Earth Magnets with a Variable Magnetic Compound Fraction for a Predefined Stray Field

    Huber, C., Abert, C., Bruckner, F., Groenefeld, M., Schuschnigg, S., Teliban, I., Vogler, C., Wautischer, G., Windl, R. & Suess, D., 25 Aug 2017, In: Scientific reports. 7.2017, 1, 8 p., 9419.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Polymer nanocomposites with cellulose nanocrystals made by co-precipitation

    Natterodt, J. C., Shirole, A., Sapkota, J., Zoppe, J. & Weder, C., 9 Aug 2017, In: Journal of Applied Polymer Science. 135.2018, 24, 9 p., 45648.

    Research output: Contribution to journal › Article › Research › peer-review

  48. E-pub ahead of print

    Influence of Melt Compounding on Blast Furnace Slag Filled PP Compounds: A Comparative Study

    Mostafa, A., Pacher, G., Lucyshyn, T., Holzer, C., Krischey, E., Flachberger, H., Fritz, B. & Laske, S., 31 Jul 2017, (E-pub ahead of print) In: International polymer processing. 32.2017, 4, p. 446-454 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. E-pub ahead of print

    Shrinkage and Warpage Optimization of Expanded-Perlite-Filled Polypropylene Composites in Extrusion-Based Additive Manufacturing

    Spörk, M., Sapkota, J., Weingrill, G., Fischinger, T., Arbeiter, F. & Holzer, C., 4 Jul 2017, (E-pub ahead of print) In: Macromolecular materials and engineering. 302.2017, 10, 13 p., 1700143.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Development of highly-filled polymer compounds for fused filament fabrication of ceramics and solvent debinding

    Cano Cano, S., Gonzalez-Gutierrez, J., Sapkota, J., Kukla, C. & Holzer, C., 27 Jun 2017.

    Research output: Contribution to conference › Presentation › Research

  51. E-pub ahead of print

    Parametric optimization of intra- and inter-layer strengths in parts produced by extrusion-based additive manufacturing of poly(lactic acid)

    Spörk, M., Arbeiter, F., Cajner, H., Sapkota, J. & Holzer, C., 26 Jun 2017, (E-pub ahead of print) In: Journal of Applied Polymer Science. 134.2017, 41, 15 p., 45401.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    SHAPING, DEBINDING AND SINTERING OF STEEL COMPONENTS VIA FUSED FILAMENT FABRICATION

    Gonzalez-Gutierrez, J., Godec, D., Kukla, C., Schlauf, T., Burkhardt, C. & Holzer, C., 8 Jun 2017, 16th International Scientific Conference on Production Engineering. Udiljak, T. (ed.). Zadar, Croatia, p. 99 104 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Fused Filament Fabrication (FFF) of PIM Feedstocks

    Kukla, C., Gonzalez-Gutierrez, J., Cano Cano, S., Hampel, S., Burkhardt, C., Moritz, T. & Holzer, C., 7 Jun 2017, ACTAS DEL VI CONGRESO NACIONAL DE PULVIMETALURGIA Y I CONGRESO IBEROAMERICANO DE PULVIMETALURGIA. Herranz, G., Ferrari, B. & Cabrera, J. M. (eds.). Ciudad Real, Spain, Vol. 6. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Fused Filament Fabrication for the production of metal and/or ceramic parts and feedstocks therefore

    Kukla, C., Gonzalez-Gutierrez, J., Cano Cano, S., Burkhardt, C., Hampel, S., Moritz, T. & Holzer, C., 29 May 2017, 19th Plansee Seminar. Reutte, Austria: Plansee AG, Vol. 19. 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Fused Filament Fabrication for the Production of Metal and/or Ceramic Parts and Feedstocks Therefore

    Kukla, C., Gonzalez-Gutierrez, J., Cano Cano, S., Burkhardt, C., Hampel, S., Moritz, T. & Holzer, C., 29 May 2017. 1 p.

    Research output: Contribution to conference › Poster › Research

  56. Published

    A refined model for the mechanical properties of polymer composites with nanorods having different length distributions

    Sapkota, J., Gooneie, A., Shirole, A. & Martinez Garcia, J. C., 25 May 2017, In: Journal of Applied Polymer Science. 134.2017, 36, 7 p., 45279.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Reinterpretation of the mechanical reinforcement of polymer nanocomposites reinforced with cellulose nanorods

    Sapkota, J., Martinez Garcia, J. C. & Lattuada, M., 15 May 2017, In: Journal of Applied Polymer Science. 134.2017, 35, 6 p., 45254.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    FILLER CONTENT AND PROPERTIES OF HIGHLY FILLED FILAMENTS FOR FUSED FILAMENT FABRICATION OF MAGNETS

    Gonzalez-Gutierrez, J., Duretek, I., Arbeiter, F., Kukla, C. & Holzer, C., 9 May 2017, ANTEC® 2017. Anaheim, California, USA, 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Properties of glass filled polypropylene for Fused Filament Fabrication

    Spörk, M., Savandaiah, C., Arbeiter, F., Schuschnigg, S. & Holzer, C., May 2017.

    Research output: Contribution to conference › Paper › peer-review

  60. Published

    MOLECULAR DYNAMICS SIMULATIONS AS A TOOL FOR MATERIAL SELECTION IN METAL INJECTION MOULDING FEEDSTOCKS

    Gooneie, A., Gonzalez-Gutierrez, J., Kukla, C. & Holzer, C., 24 Apr 2017, CONFERENCE PROCEEDINGS ICIT&APT 2017 10th International Conference on Industrial Tools and Advanced Processing Technologies. Hancic, A. & Grum, J. (eds.). Ljubljana, Slovenia, Vol. 10. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    The SDS process: A viable way for the production of metal parts

    Kukla, C., Gonzalez-Gutierrez, J., Hampel, S., Burkhardt, C. & Holzer, C., 24 Apr 2017, CONFERENCE PROCEEDINGS ICIT&APT 2017 10th International Conference on Industrial Tools and Advanced Processing Technologies. Hancic, A. & Grum, J. (eds.). Vol. 10. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    Metal Injection Moulding for the Production of Recycled Rare Earth Magnets

    Gonzalez-Gutierrez, J., Walton, A., Schlauf, T., Burkhardt, C., Kukla, C., Krispin, M. & Holzer, C., 20 Apr 2017. 1 p.

    Research output: Contribution to conference › Poster › Research

  63. E-pub ahead of print

    The effects of e-beam crosslinking of LDPE on the permeation of hydrocarbons

    Berger, K., Keimel, C., Helfer, E., Haar, B., Mattausch, H., Riess, G. & Kern, W., 6 Mar 2017, (E-pub ahead of print) In: Journal of Applied Polymer Science. 134.2017, 25, 8 p., 44968.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Rheology of PIM feedstocks

    Kukla, C., Duretek, I., Gonzalez-Gutierrez, J. & Holzer, C., 9 Feb 2017, In: Metal Powder Report. 72, 1, p. 39-44 6 p.

    Research output: Contribution to journal › Article › Research

  65. Published

    A Review of Multiscale Computational Methods in Polymeric Materials

    Gooneie, A., Schuschnigg, S. & Holzer, C., 9 Jan 2017, In: Polymers / Molecular Diversity Preservation International. 9.2017, 1, 80 p., 16.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Kukla, C., Gonzalez-Gutierrez, J., Duretek, I., Schuschnigg, S. & Holzer, C., 2017.

    Research output: Contribution to conference › Paper › peer-review

  67. Published

    Influence of compounding technology on rheological, thermal and mechanical behavior of blast furnace slag filled polystyrene compounds

    Mostafa, A., Pacher, G. A., Lucyshyn, T., Holzer, C., Flachberger, H., Krischey, E., Fritz, B. & Laske, S., 2017, In: AIP Conference Proceedings. 1914.2017, 1, 6 p., 150003.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Influence of Nanocellulose Type and Their Length Distribution in Mechanical Reinforcement of Multifiller Nanocomposites

    Sapkota, J., Shirole, A., Foster, E. J., Martinez Garcia, J. C., Lattuada, M. & Weder, C., 2017.

    Research output: Contribution to conference › Poster › Research

  69. Published

    Length controlled kinetics of self-assembly of bidisperse nanotubes/nanorods in polymers

    Gooneie, A., Sapkota, J., Shirole, A. & Holzer, C., 2017, In: Polymer. 118.2017, 2 June, p. 236-248 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Material flow data for numerical simulation of powder injection molding

    Duretek, I. & Holzer, C., 2017, In: Universal Journal of Materials Science. 5.2017, 1, p. 7-14 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Modeling and Characterization of Conical and Parallel Co-Rotating Twin Screw Extruders

    Selvasankar, R. K., 2017

    Research output: Thesis › Doctoral Thesis

  72. Published

    Multiscale Modelling and Simulation of Flow Behavior of Polymer/Layered Silicate Nanocomposites Under Shear Flow

    Gooneie, A., 2017

    Research output: Thesis › Doctoral Thesis

  73. Published

    Optimierung der Entgasungsleistung von bedruckten LDPE-Folien in der Extrusion am Beispiel einer TVEplus Recyclinganlage

    Sochor, S., 2017

    Research output: Thesis › Master's Thesis

  74. Published

    Re-design of a polymer oil wiper for reciprocating compressors

    Radler, B., 2017

    Research output: Thesis › Master's Thesis

  75. Published

    Spezielle Aspekte der Spritzgießsimulation

    Lucyshyn, T., Messiha, M. & Holzer, C., 2017, Schriftenreihe Kunststofftechnik Leoben: 26. Leobener Kunststoff-Kolloquium. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 07. p. 67-76 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    The Influence of Blast Furnace Slag as a Functional Filler on Polypropylene Compounds

    Mostafa, A., 2017

    Research output: Thesis › Doctoral Thesis

  77. Published

    Vergleich der Verwertungssysteme werkstoffliches und rohstoffliches Polyolefinrecycling anhand von ausgewählten Abfallströmen

    Möllnitz, S., 2017

    Research output: Thesis › Master's Thesis

  78. Published

    Weld line quality monitoring of sealing elements using a newly designed test station

    Schmid, M., 2017

    Research output: Thesis › Master's Thesis

  79. 2016
  80. Published

    A PROCESS FOR PRODUCING SYNTHETIC PAPER AND PAPER THUS OBTAINED

    Laske, S. (Inventor), Langecker, G. R. (Inventor) & Friesenbichler, W. (Inventor), 14 Dec 2016, IPC No. B32B27/06, Patent No. EP2376284 (B1)

    Research output: Patent

  81. Published

    Cranial Polypropylene Implants by Fused Filament Fabrication

    Katschnig, M., Arbeiter, F., Haar, B., von Campe, G. & Holzer, C., 2 Dec 2016, In: Advanced engineering materials. 19.2017, 4, 5 p., 1600676.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Polymer Trends: Fused Filament Fabrication projects at MUL-KV

    Gonzalez-Gutierrez, J., 2 Dec 2016, p. 1-56. 56 p.

    Research output: Contribution to conference › Presentation › Education

  83. Published

    Characterization and Prediction of Fiber Orientation in Short Fiber Reinforced Thermoplastics

    Morak, M., Tscharnuter, D., Lucyshyn, T., Gross, T., Steinberger, R., Göttlinger, M. & Hahn, W., 16 Nov 2016.

    Research output: Contribution to conference › Presentation › Research

  84. Published

    Rec2TecPart - Funktionsbauteile aus RecHQ

    Katschnig, M., 10 Nov 2016.

    Research output: Contribution to conference › Presentation › Research

  85. Published

    Polymer Recyclates for Technical Parts

    Katschnig, M., Holzer, C., Hornitschek, B. & Purgleitner, B., 8 Nov 2016, Tagungsband zur 13. Recy & DepoTech-Konferenz. Leoben, Vol. 13. p. 179 - 182 4 p. 153

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    The mold in the focus

    Holzer, C., 8 Nov 2016.

    Research output: Contribution to conference › Abstract

  87. Published

    3D Printing of Polymer Bonded Rare-Earth Magnets With a Variable Magnetic Compound Density for a Predefined Stray Field.

    Huber, C., Abert, C., Bruckner, F., Groenefeld, M., Schuschnigg, S., Teliban, I., Wautischer, G. & Suess, D., 25 Oct 2016, 61st Annual Conference on Magnetism and Magnetic Materials. p. 376 1 p. DF-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Polymer Processing - What is the Future?

    Holzer, C., 15 Oct 2016.

    Research output: Contribution to conference › Abstract

  89. Published

    Atomistic Modelling of Confined Polypropylene Chains between Ferric Oxide Substrates at Melt Temperature

    Gooneie, A., Gonzalez-Gutierrez, J. & Holzer, C., 14 Oct 2016, In: Polymers / Molecular Diversity Preservation International. 8.2016, 10, p. 361-380 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Special Materials and Technologies for Fused Filament Fabrication

    Holzer, C., 13 Oct 2016.

    Research output: Contribution to conference › Presentation › Research

  91. Published

    Special Materials and Technologies for Fused Filament Fabrication

    Spörk, M., Gonzalez-Gutierrez, J., Schuschnigg, S. & Holzer, C., 11 Oct 2016, 2016 PPS Asia/Australia Conference. Chengdu, China, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. Published

    Metal Injection Moulding of NdFeB Based on Recycled Powders

    Imgrund, P., Weber, O., Schlauf, T., Pischang, K., Pickering, L., Walton, A., Gonzalez-Gutierrez, J., Kukla, C. & Burkhardt, C., 9 Oct 2016, World PM2016 Congress & Exhibition. Petzoldt, F. (ed.). Hamburg, Germany: European Powder Metallurgy Association, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Properties for PIM Feedstocks Used in Fused Filament Fabrication

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 9 Oct 2016, World PM2016 Congress & Exhibition. Petzoldt, F. (ed.). Hamburg, Germany: European Powder Metallurgy Association, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    iPrint - Implantate aus dem 3D-Drucker

    Katschnig, M., Holzer, C., Zefferer, U. & Schäfer, U., 1 Oct 2016, In: Jahresmagazin Kunststofftechnik : Ingenieurwissenschaften ... : im Fokus . IWV 96-449, p. 70-74 5 p.

    Research output: Contribution to journal › Article › Research

  95. Published

    Analysis of factors affecting the demolding of micro-structured devices in the injection molding process

    Strohmayer, B., Struklec, T., Lucyshyn, T. & Holzer, C., Oct 2016. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  96. Published

    Filling behavior of micro-ribs on injection molded parts depending on micro-structure orientation and processing parameters

    Lucyshyn, T., Burgsteiner, M., Graninger, G. & Holzer, C., Oct 2016, AIP Conference Proceedings: Proceedings of the Regional Conference Graz 2015 - Polymer Processing Society PPS. Vol. 1779. 5 p. 020009

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Bonding forces in Fused Filament Fabricaiton

    Spörk, M., 23 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  98. Published

    Bonding Forces in Fused Filament Fabrication

    Spörk, M., Schuschnigg, S., Holzer, C., Arbeiter, F. & Berger, G., 23 Sept 2016.

    Research output: Contribution to conference › Abstract › peer-review

  99. Published

    Influence of mold steel on injection molding process: Experimental and numerical studies

    Lucyshyn, T., 23 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  100. Published

    Injection Molds - The Key to Quality Products

    Holzer, C. & Lucyshyn, T., 23 Sept 2016.

    Research output: Contribution to conference › Abstract

  101. Published

    Upcycling of POM for Catch Springs by Using the Rec2TecPart Process

    Holzer, C., Katschnig, M., Purgleitner, B. & Hornitschek, B., 29 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  102. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Holzer, C., Kukla, C., Duretek, I., Schuschnigg, S. & Gonzalez-Gutierrez, J., 28 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  103. Published

    Physical foam extrusion of polyolefin/cycloolefin copolymer blends

    Holzer, C., Walluch, M., Uray, A. & Langecker, G., 28 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

Previous 1 2 3 4 5 6 7 8 ...10 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 3501