Chair of Polymer Processing (350)

Organisational unit: Chair

1 - 100 out of 944Page size: 100

10
20
50
100
All

Sort by: Publication date

Research output

2025
Published
Der Slalom des Ski-Recyclings
Höfler, K. & Zidar, D., 22 Feb 2025, 2 p.
Research output: Other contribution › Research
Published
Tailored Recycled Composites: Enhancing the Performance of Injection Moulded Post-Consumer Polypropylene Composites Using Box-Behnken Design
Shahroodi, Z., Zidar, D., Momeni, V., Arbeiter, F., Duretek, I., Krempl, N., Berger-Weber, G. & Holzer, C., 15 Feb 2025, In: Polymer Testing. 144.2025, March, 13 p., 108743.
Research output: Contribution to journal › Article › Research › peer-review
Published
Recycling the unrecyclable: Analyses of recycling opportunities in the winter sport industry
Zidar, D., Bandl, C., Cwioro, T., Pardametz, V., Krempl, N. & Holzer, C., 24 Jan 2025, 4th International Conference on Polymer Process Innovation (PPI). Centre for Polymer and Material Technologies, p. 237-240 4 p. 20901
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Upcycling of regenerates and injection molding through a new technological approach
Shahroodi, Z., Zidar, D., Krempl, N., Friesenbichler, W. & Holzer, C., 24 Jan 2025, PPI 2024 : International Conference on Polymer Process Innovation, Proceedings. p. 219-223 5 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2024
Published
CircularBioMat
Schuschnigg, S. & Holzer, C., 21 Nov 2024, 32nd Leoben-Conference on Polymer Engineering and Science: New Materials - New Perspectives. Griesser, T. & Ladstätter, E. (eds.). Leoben, Vol. 13. p. 223
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Feedstock Development for Material Extrusion of Aluminium: Printability and Debinding
Schuschnigg, S., Momeni, V. & Kukla, C., 21 Nov 2024, 32nd Leoben-Conference on Polymer Engineering and Science: New Materials New Perspectives. Leoben, Vol. 32. p. 132 1 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Manufacturing of Soft Dielectric Actuator Assemblies by Material Extrusion (MEX)
Raguz, I., Berer, M., Beier, P., Schlögl, S., Brancart, J., Vanderborght, B. & Holzer, C., 21 Nov 2024, p. 143-151. 9 p.
Research output: Contribution to conference › Paper
Published
Analyse und Optimierung von österreichischem Polystyrol-Haushaltsabfall für die Wiederverwendung in Joghurtbecher-Lebensmittelverpackungen
Krempl, N., Frühwirth, M., Zidar, D., Shahroodi, Z., Holzer, C., Pinter, E., Archodoulaki, M. V., Bichler, L., Jahn, E., Gabriel, V. H. & Aschermayer, F., 13 Nov 2024, VORTRÄGE-Konferenzband zur 17. Recy & DepoTech-Konferenz. p. 305-312 8 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Recycling of Wintersport Hardgoods - The Challenges of Circularity
Zidar, D., Krempl, N., Pardametz, V., Bandl, C., Holzer, C., Griesser, T. (Editor) & Ladstätter, E. (Editor), Nov 2024, 32nd Leoben-Conference on Polymer Engineering and Science: New Materials - New Perspectives. p. 39-47 9 p. (Publication Series Polymer Engineering & Science Leoben; vol. 13).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Enhancing Recycled Polymers: The Impact of Reused Glass Fiber Composites on Rheological Properties and Processing Performance
Shahroodi, Z., Krempl, N., Duretek, I. & Holzer, C., 25 Oct 2024.
Research output: Contribution to conference › Abstract
Published
Insights Into LAOS Analysis of Liquid Silicone Rubber for Viscosity Determination
Azevedo, M., Kerschbaumer, R. C. & Holzer, C., 25 Oct 2024.
Research output: Contribution to conference › Abstract
Published
Rheological Characterisation of Powder Injection Moulding Feedstocks
Duretek, I., Lucyshyn, T. & Holzer, C., 25 Oct 2024.
Research output: Contribution to conference › Abstract
Published
Effect of Epoxy Chain Extender and Multiple Processing on Poly-(R)-3-Hydroxybutyrate’s Properties
Hinterberger, K., Main, P., Waly, C. & Lucyshyn, T., 4 Oct 2024, In: Journal of polymers and the environment. 33.2025, January, p. 112-124 13 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Supportless lattice structure of 316L stainless steel fabricated by material extrusion additive manufacturing: Effect of relative density on physical, microstructural and mechanical behaviour
Parsompech, N., Suwanpreecha, C., Noraphaiphipaksa, N., Hararak, B., Songkuea, S., Schuschnigg, S., Kukla, C., Kanchanomai, C. & Manonukul, A., 14 Sept 2024, In: Materials Science and Engineering: A. 915.2024, November, 14 p., 147270.
Research output: Contribution to journal › Article › Research › peer-review
Published
Spritzgießcompoundieren im Recycling von Post-Consumer PP Abfällen
Zidar, D., Krempl, N., Shahroodi, Z., Kirschnick, U. & Holzer, C., 1 Sept 2024, In: Jahresmagazin Kunststofftechnik : Ingenieurwissenschaften ... : im Fokus . 2024, 01, p. 38-42 5 p.
Research output: Contribution to journal › Article › Research
Published
Selecting the suitable thermoplastic elastomer as the main component in the feedstock for metal material extrusion of aluminium
Momeni, V., Shahroodi, Z., Hufnagl, M., Gonzalez-Gutierrez, J., Duretek, I., Schuschnigg, S., Kukla, C. & Holzer, C., 8 Aug 2024, In: Results in Engineering. 23.2024, September, 12 p., 102692.
Research output: Contribution to journal › Article › Research › peer-review
Published
Waste-to-Value Feasibility Study: Assessing the Viability and Quality of Incorporating Different Postindustrial Glass-Fiber Composites into Postconsumer Recycled Polypropylene
Shahroodi, Z., Krempl, N., Zidar, D., Mayrhofer, T., Kirschnick, U., Arbeiter, F., Duretek, I. & Holzer, C., 7 Aug 2024, In: ACS Sustainable Chemistry and Engineering. 12.2024, 33, p. 12619-12631 13 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Manufacturing bio-based fiber-reinforced polymer composites: Process performance in RTM and VARI processes
Kirschnick, U., Feuchter, M., Ravindran, B., Salzmann, M., Duretek, I., Fauster, E. & Schledjewski, R., 19 Jul 2024, In: Advanced Manufacturing: Polymer and Composites Science. 10.2024, 1, 12 p., 2379205.
Research output: Contribution to journal › Article › Research › peer-review
Published
Optimization Strategy for Process Design in Rubber Injection Molding: A Simulation-Based Approach Allowing for the Prediction of Mechanical Properties of Vulcanizates
Traintinger, M., Azevedo, M., Kerschbaumer, R. C., Lechner, B. & Lucyshyn, T., 17 Jul 2024, In: Polymers. 16.2024, 14, 20 p., 2033.
Research output: Contribution to journal › Article › Research › peer-review
Published
Additive Manufacturing of Bone Implants
Holzer, C., 1 Jul 2024.
Research output: Contribution to conference › Abstract
Published
Binder System Composition on the Rheological and Magnetic Properties of Nd-Fe-B Feedstocks for Metal Injection Molding
Momeni, V., Luca, S., Gonzalez-Gutierrez, J., Cano, S., Sueur, E., Shahroodi, Z., Schuschnigg, S., Kukla, C. & Holzer, C., Jul 2024, In: Applied Sciences (Switzerland). 14.2024, 13, 15 p., 5638.
Research output: Contribution to journal › Article › Research › peer-review
Published
An Investigation on The Effects of Post-industrial Glass Fiber Flakes on the Properties of Recycled Polypropylene
Raguz, I., Shahroodi, Z., Krempl, N., Arbeiter, F., Friesenbichler, W. & Holzer, C., 23 May 2024.
Research output: Contribution to conference › Paper › peer-review
Published
Recycling of Paper Machine Clothing: ReFibreValue
Duretek, I., 23 May 2024.
Research output: Contribution to conference › Poster › Research
Published
Additive Manufacturing Material Extrusion @ Institute of Polymer Processing: Alf³
Schuschnigg, S., 22 May 2024. 1 p.
Research output: Contribution to conference › Poster › Research
Published
Additive Manufacturing of Aluminium by Material Extrusion MEX
Momeni, V., 22 May 2024. 1 p.
Research output: Contribution to conference › Poster › Research
Published
Chemitecture: Dielectric Elastomer Actuator (DEA) produced by Material Extrusion (MEX)
Raguz, I., 22 May 2024. 1 p.
Research output: Contribution to conference › Poster › Research
Published
Closing the circle of polyolefin packaging: Pack2Loop
Krempl, N., 22 May 2024. 1 p.
Research output: Contribution to conference › Poster › Research
Published
Extrusion and Additive Manufacturing@ Institute of Polymer Processing
Schuschnigg, S., 22 May 2024. 1 p.
Research output: Contribution to conference › Poster › Research
Published
LightCycle: Upcycling of regenerates with a new Injection Moulding Compounder (IMC)
Shahroodi, Z., 22 May 2024. 1 p.
Research output: Contribution to conference › Poster › Research
Published
Material Data Determination @ Institute of Polymer Processing
Duretek, I., 22 May 2024. 1 p.
Research output: Contribution to conference › Poster › Research
Published
Recycling Biobased Plastics: C-PlaNet
Main, P., 22 May 2024. 1 p.
Research output: Contribution to conference › Poster › Research
Published
Wintersport Ressource Efficiency and Improved Circular Economy: WINTRUST
Krempl, N., 22 May 2024. 1 p.
Research output: Contribution to conference › Poster › Research
Published
Bio-Based Backbone for Highly Reactive Metal Alloys Feedstocks for MEX
Holzer, C., Momeni, V., Pöhle, G., Riecker, S., Schuschnigg, S. & Kukla, C., 19 May 2024.
Research output: Contribution to conference › Paper › peer-review
Published
Simulation of the Melting Region in Additive Manufacturing Material Extrusion Dies for Highly Filled Feedstocks
Schuschnigg, S., Hentschel, L. & Holzer, C., 19 May 2024.
Research output: Contribution to conference › Paper › peer-review
Published
Unlocking the Potential of Recycled Polypropylene in Food Packaging
Krempl, N., Holzer, C., Pinter, E., Frühwirth, M., Shahroodi, Z., Jahn, E., Aschermayer, F. & Gabriel, V. H., 19 May 2024. 8 p.
Research output: Contribution to conference › Paper › peer-review
Published
Effect of mechanical recycling on short glass fibre reinforced polyamide 6,6 from post-industrial waste
Salvi, A., Lucyshyn, T., Marano, C., Ostrowska, M., Vangosa, F. B., Dotelli, G. & Holzer, C., 8 May 2024, In: AIP Conference Proceedings. 3158, 1, 120005.
Research output: Contribution to journal › Conference article › peer-review
Published
Multi-Material Implant Structures with Medical-Grade Polyurethane via Additive Manufacturing
Hentschel, L., Petersmann, S., Gradischar, A., Lebschy, C., Lindenmann, J., Smolle-Juettner, F., Gonzalez-Gutierrez, J., Dias, A., Kynast, F., Hammer, N., Schäfer, U. & Holzer, C., 8 May 2024, In: AIP Conference Proceedings. 3158, 1, 150005.
Research output: Contribution to journal › Conference article › peer-review
Published
Polymer Processing Bringing Together Polymers, Metals and Ceramics
Holzer, C., 18 Apr 2024.
Research output: Contribution to conference › Abstract
Published
Production of Permanent Magnets from Recycled NdFeB Powder with Powder Extrusion Moulding
Rathfelder, S., Schuschnigg, S., Kukla, C., Holzer, C. & Burkhardt, C., 18 Apr 2024, In: Journal of Manufacturing and Materials Processing. 8.2024, 2, 19 p., 81.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Comparative analysis of binder systems in copper feedstocks for metal extrusion additive manufacturing and metal injection moulding
Sadaf, M., Cano Cano, S., Bragaglia, M., Schuschnigg, S., Kukla, C., Holzer, C., Vály, L., Kukla, C., Kitzmantel, M., Nanni, F. & Gonzalez-Gutierrez, J., 21 Feb 2024, (E-pub ahead of print) In: Journal of Materials Research and Technology. 29.2024, March-April, p. 4433-4444 12 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Rapid tooling for rubber extrusion molding by digital light processing 3D printing with dual curable vitrimers
Höller, R., Hrbinič, K., Reisinger, D., Alabiso, W., Schuschnigg, S., Fleisch, M., Waly, C., Rossegger, E. & Schlögl, S., 19 Feb 2024, In: Applied research. 3.2024, 4, 10 p., e202300133.
Research output: Contribution to journal › Article › Research › peer-review
Published
Investigation on strategies for optimizing process definition in rubber processing: A study on mechanical and chemical properties of vulcanizates as basis for the development of a new calculation model for quality prediction
Traintinger, M., Kerschbaumer, R. C., Hornbachner, M., Lechner, B. & Lucyshyn, T., 10 Feb 2024, In: Journal of applied polymer science. 141.2024, 6, 18 p., e54901.
Research output: Contribution to journal › Article › Research › peer-review
Published
Development of Material and Processing Parameters for AM
Ureña, J., Blasco, J. R., Jordá, O., Martínez, M., Portolés, L., Gonzalez-Gutierrez, J. & Schuschnigg, S., 2024, Springer Tracts in Additive Manufacturing. Springer Nature, p. 231-306 76 p. (Springer Tracts in Additive Manufacturing; vol. Part F3252).
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Entwicklung von auf Magnesiumhydroxid basierenden flammgeschützten hochviskosen Polypropylencompounds für Lüftungsrohre
Sartori, M., 2024
Research output: Thesis › Master's Thesis
Published
Evaluierung des Einsatzes von Spritzgießsimulation zur Vorhersage der Maßstreuungen von Kunststoffformteilen
Schedler, M., 2024
Research output: Thesis › Master's Thesis
Published
Fabrication of multi-material dielectric elastomer actuators with the additive manufacturing process of material extrusion
Beier, P., 2024
Research output: Thesis › Master's Thesis
Published
Herstellung von Farbmasterbatches mit unterschiedlichen Trägermaterialien für die weitere Verwendung bei der Produktion von PET-Folien und -Platten
Maurer, C., 2024
Research output: Thesis › Master's Thesis
Published
Influence of binder compositions, solvents, and material extrusion parameters on aluminum additive manufacturing via SDS
Hufnagl, M., 2024
Research output: Thesis › Master's Thesis
Published
Introduction to Additive Manufacturing
Godec, D., Pilipović, A., Breški, T., Ureña, J., Jordá, O., Martínez, M., Gonzalez-Gutierrez, J., Schuschnigg, S., Blasco, J. R. & Portolés, L., 2024, Springer Tracts in Additive Manufacturing. Springer Nature, p. 1-44 44 p. (Springer Tracts in Additive Manufacturing; vol. Part F3252).
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Investigating Hydrogen Diffusion in Filled Polymers with Simple Geometries: An ABAQUS Simulation Study
Graf, A. L., 2024
Research output: Thesis › Master's Thesis
Published
Material data determination of liquid silicone rubber: characterization methods for a reliable injection moulding simulation
Azevedo de Freitas, M., 2024
Research output: Thesis › Doctoral Thesis
Published
Material Selection and Process Development of Droplet Based Additive Manufacturing for Medical Implants
Hentschel, L., 2024
Research output: Thesis › Doctoral Thesis
Published
Wareneingangskontrolle von rezyklierten und Neuware-Polypropylenen mittels Folienextrusion
Wögerbauer, V., 2024
Research output: Thesis › Master's Thesis
2023
Published
Investigating the Aging Behavior of High-Density Polyethylene and Polyketone in a Liquid Organic Hydrogen Carrier
Surisetty, J. S. S., Sharifian, M., Lucyshyn, T. & Holzer, C., 15 Nov 2023, In: Polymers. 15.2023, 22, 14 p., 4410.
Research output: Contribution to journal › Article › Research › peer-review
Published
Revolutionizing fiber-reinforced thermoplastic composite recycling : the LightCycle project's journey towards energy-efficient upcycling and quality material regeneration
Krempl, N. & Shahroodi, Z., 1 Nov 2023, 60th Ilmenau Scientific Colloquium. p. 1-10 10 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Bestimmung des pvT-Verhaltens für unterschiedliche MIM-Feedstocks
Duretek, I., 24 Oct 2023, Leoben. 8 p.
Research output: Book/Report › Commissioned report › Research
Published
Impact of Multiple Reprocessing on Properties of Polyhydroxybutyrate and Polypropylene
Main, P., Petersmann, S., Wild, N., Feuchter, M., Duretek, I., Edeleva, M., Ragaert, P., Cardon, L. & Lucyshyn, T., 18 Oct 2023, In: Polymers. 15.2023, 20, 24 p., 4126.
Research output: Contribution to journal › Article › Research › peer-review
Published
Material data determination for one ceramic CIM-feedstock for injection molding simulation using SIGMASOFT®
Duretek, I., 12 Oct 2023, 15 p.
Research output: Book/Report › Commissioned report › Research
Published
Material characterisation of industrial textile waste under consideration of various processing conditions
Jenull, U., Duretek, I., Lucyshyn, T. & Holzer, C., 9 Oct 2023, Proceedings SARDINIA 2023. p. 1-5 5 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Closing the loop of polypropylene and polystyrene food packaging
Jahn, E., Fajtak, A., Archodoulaki, M. V., Bichler, L., Pinter, E. & Krempl, N., 13 Sept 2023, p. 1.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Influence of Melt Strength Enhancers on PHB Processing
Main, P., Lucyshyn, T., Van de Ginste, L. & Cardon, L., 13 Sept 2023.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Effect of LOHC on HDPE and POK under different temperature conditions
Surisetty, J. S. S., Lucyshyn, T. (Editor) & Holzer, C., 7 Sept 2023.
Research output: Contribution to conference › Poster › Research
Published
Influence of processing conditions of industrial textile waste on rheological and thermal material properties
Jenull, U., Holzer, C. & Lucyshyn, T., 7 Sept 2023, 31st Leoben-Conference on Polymer Engineering and Science: Circular Thinking in Polymer Technology. Leoben, Vol. Volume 12. p. 1-12 12 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Susmagpro
Schuschnigg, S. & Kukla, C., 7 Sept 2023.
Research output: Contribution to conference › Poster › Research
Published
The effect of coalescence and diffusion on the part generation in the ARBURG plastic freeforming
Hentschel, L., Maurer, C., Gonzalez-Gutierrez, J., Kynast, F., Schäfer, U. & Holzer, C., 7 Sept 2023, p. 1-1. 1 p.
Research output: Contribution to conference › Poster › Research
Published
The Effect of Post-industrial Recycled Glass Fiber Flakes on the Rheological Properties of Recycled Polypropylene
Shahroodi, Z., Krempl, N. (Editor) & Holzer, C. (Co-editor), 7 Sept 2023.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Debinding And Sintering Strategies For Fused Filament Fabrication Of Aluminium Alloys
Poehle, G., Quadbeck, P., Riecker, S., Kukla, C., Momeni, V. & Schuschnigg, S., Sept 2023, Euro Powder Metallurgy 2023 Congress & Exhibition.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Filament Development for Metallic Fused Filament Fabrication of Aluminium Alloys
Kukla, C., Momeni, V., Poehle, G., Riecker, S. & Schuschnigg, S., Sept 2023, Euro Powder Metallurgy 2023 Congress & Exhibition.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Peroxide-based crosslinking of solid silicone rubber: part II: The counter-intuitive influence of dicumylperoxide concentration on crosslink effectiveness and related network structure
Azevedo, M., Monks, A.-M., Kerschbaumer, R., Schlögl, S., Saalwächter, K., Walluch, M., Consolati, G. & Holzer, C., 15 Aug 2023, In: Journal of applied polymer science. 140.2023, 31, 17 p., e54111.
Research output: Contribution to journal › Article › Research › peer-review
Published
Determination of the material data for CIM-feedstock FAT-DS (SPT CA)
Duretek, I., 14 Aug 2023, 13 p.
Research output: Book/Report › Commissioned report › Research
Published
Measurement of thermal conductivity and specific volume for four pharmaceutical formulations
Duretek, I., 28 Jul 2023, 13 p.
Research output: Book/Report › Commissioned report › Research
Published
Enhancing High-Pressure Capillary Rheometer Viscosity Data Calculation with the Propagation of Uncertainties for Subsequent Cross-Williams, Landel, and Ferry (WLF) Parameter Fitting
Hubmann, M., Schuschnigg, S., Duretek, I., Groten, J. & Holzer, C., 24 Jul 2023, In: Polymers. 15.2023, 14, 21 p., 3147.
Research output: Contribution to journal › Article › Research › peer-review
Published
Personalization of Complex Vaginal Inserts of Ethylene Vinyl Acetate via 3D-Printing
Eder, S., Kuchler, L., Katschnig, M., Brandl, B., Wolfgang, M., Koutsamanis, I., Hentschel, L., Arbeiter, F., Roblegg, E. & Spoerk, M., 13 Jul 2023, In: Advanced Materials Technologies. 8.2023, 17, 15 p., 2300237.
Research output: Contribution to journal › Article › Research › peer-review
Published
Effects of Different Polypropylene (PP)-Backbones in Aluminium Feedstock for Fused Filament Fabrication (FFF)
Momeni, V., Shahroodi, Z., Gonzalez-Gutierrez, J., Hentschel, L., Duretek, I., Schuschnigg, S., Kukla, C. & Holzer, C., 11 Jul 2023, In: Polymers. 15.2023, 4, 18 p., 3007.
Research output: Contribution to journal › Article › Research › peer-review
Published
The effect of residual polyethylene on mechanical and rheological properties of recycled Polypropylene
Shahroodi, Z., 25 May 2023, p. 1. 1 p.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Wear phenomenon in injection molding
Zidar, D., Friesenbichler, W. & Blutmager, A., 23 May 2023, In: AIP Conference Proceedings. 2607.2023, 1, 6 p., 040003.
Research output: Contribution to journal › Article › Research › peer-review
Published
Pack2theLoop – Gemeinsam zum geschlossenen Kreislauf für Polyolefin Verpackungen
Jahn, E., Fajtak, A., Bichler, L., Schlossnikl, J., Archodoulaki, M. V., Pinter, E., Krempl, N. & Eder, A., 1 May 2023, In: Pack & Log – die Fachzeitschrift für Verpackung & Intralogistik. 2023, 05, p. 12-13 2 p.
Research output: Contribution to journal › Article › Research
Published
Current challenges in NdFeB permanent magnets manufacturing by Powder Injection Molding (PIM): A review
Crozier-Bioud, T., Momeni, V., Gonzalez-Gutierrez, J., Kukla, C., Luca, S. & Rolere, S., May 2023, In: Materials today. Physics. 34.2023, May, 13 p., 101082.
Research output: Contribution to journal › Review article › peer-review
Published
Multifunctional Ti₃AlC₂-Based Composites via Fused Filament Fabrication and 3D Printing Technology
Liu, D., Hentschel, L., Lin, G., Kukla, C., Schuschnigg, S., Ma, N., Wallis, C., Momeni, V., Kitzmantel, M. & Sui, G., 25 Apr 2023, In: Journal of Materials Engineering and Performance. 32.2023, 20, p. 9174-9181 8 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Parameter Study on Force Curves of Assembled Electronic Components on Foils during Injection Overmolding Using Simulation
Hubmann, M., Bakr, M., Groten, J., Pletz, M., Vanfleteren, J., Bossuyt, F., Madadnia, B. & Stadlober, B., 19 Apr 2023, In: Micromachines. 14.2023, 4, 15 p., 876.
Research output: Contribution to journal › Article › Research › peer-review
Published
Determination of Material Data for one PA66-GF30 (Badamid A70 GF30 HH E) for injection moulding simulation
Duretek, I., 4 Apr 2023, 19 p.
Research output: Book/Report › Commissioned report › Research
Published
Influence of Injection Molding Parameters on the Peel Strength between Plasma-Treated Fluoropolymer Films and Polycarbonate
Hubmann, M., Groten, J., Pletz, M., Grießer, T., Plevová, K., Nemitz, W. & Stadlober, B., 21 Mar 2023, In: Polymers. 15.2023, 6, 19 p., 1568.
Research output: Contribution to journal › Article › Research › peer-review
Published
Effects of simulated body fluid on the mechanical properties of polycarbonate polyurethane produced via material jetting
Petersmann, S., Huemer, M., Hentschel, L. & Arbeiter, F., 6 Mar 2023, In: Polymer Testing. 120.2023, March, 10 p., 107977.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Soft dielectric actuator produced by multi-material fused filament fabrication 3D printing
Raguž, I., Berer, M., Fleisch, M., Holzer, C., Brancart, J., Vanderborght, B. & Schlögl, S., 6 Mar 2023, (E-pub ahead of print) In: Polymers for Advanced Technologies. 34.2023, 6, p. 1967-1978 12 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Research Progress on Low-Pressure Powder Injection Molding
Momeni, V., Hufnagl, M., Shahroodi, Z., Gonzalez-Gutierrez, J., Schuschnigg, S., Kukla, C. & Holzer, C., Jan 2023, In: Materials. 16.2023, 1, 44 p., 379.
Research output: Contribution to journal › Review article › peer-review
Published
Advancing Industry 4.0: AI-Enhanced In-Line MIMO Quality Control for Piano-Black Curved Plastic Injection Molded Parts with OPC UA Integration
Saeidi Aminabadi, S., 2023
Research output: Thesis › Doctoral Thesis
Published
Bestimmung des Schwindungsverhaltens von spritzgegossenen, glasfaserverstärkten Kunststoffen
Zirnig, T., 2023
Research output: Thesis › Master's Thesis
Published
Effect of weld lines on in-vitro drug release from additively manufactured pharmaceutical devices of ethylene vinyl acetate (EVA) produced via material extrusion (MEX)
Gomez Contreras, A., 2023
Research output: Thesis › Master's Thesis
Published
Einfluss der Materialvorbehandlung und Prozessparameter auf die Eigenfluoreszenz von spritzgegossenen Cyclo Olefin Polymer Bauteilen
Habicher, M., 2023
Research output: Thesis › Master's Thesis
Published
Einfluss von Fließhilfsmitteln auf Polyamid 12 basierte Pulver für das Pulverbettschmelzen
Staniszewski, M., 2023
Research output: Thesis › Master's Thesis
Published
Environmental performance comparison of a one-step and two-step compounding and injection molding process using recycled PP and glass fibers
Kirschnick, U., Shahroodi, Z., Krempl, N. & Schledjewski, R., 2023, Polymer Meeting 15: Book of Abstracts.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Influence of Epoxy Chain Extender and Multi-Stage Compounding Process on the Properties of Poly-(R)-3-hydroxybutyrate
Hinterberger, K., 2023
Research output: Thesis › Master's Thesis
Published
Nirali and the Wise Bottles
Main, P., 2023, Plastic Planet: A guide to recycling and caring for our environment. p. 12-17 6 p.
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer › peer-review
Published
Process optimization and simulation of film insert molding for electronic applications
Hubmann, M., 2023
Research output: Thesis › Doctoral Thesis
Published
Screening Life Cycle Assessment comparing One-step and Two-step Injection Molding Compounding using Conservative and Optimistic Scenarios
Kirschnick, U., Shahroodi, Z., Krempl, N. & Schledjewski, R., 2023, In: WSEAS transactions on environment and development. 19.2023, 11 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Screening Method Development for Die Drool in Extrusion Blow Moulding for PCR PEHD
Jochum, P. A., 2023
Research output: Thesis › Master's Thesis
Published
Validation Of Alternative Binders for Pellet Extrusion 3D Printing Of 316L Steels
de la Camacha, A. G., Tabares, E., Jiménez-Morales, A., Schsuchnigg, S., Kukla, C., Cano, S. & Gordo, E., 2023.
Research output: Contribution to conference › Paper › peer-review
2022
Published
Sustainable Tunnelling – An infrastructure operator’s, planner’s, contractor’s and scientist’s perspective.
Heissenberger, R., Grunicke, U., Raschendofer, J. & Holzer, C., 8 Dec 2022, In: Geomechanics and tunnelling. 15.2022, 6, p. 811-820 9 p.
Research output: Contribution to journal › Article › Transfer › peer-review
Published
Metal Injection Molding of Low Alloy Steel by Using a Palm Stearin/HDPE Binder System
Momeni, V., Dec 2022, Key engineering materials. (Key engineering materials).
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
The effect of carbon fiber content on physico-mechanical properties of recycled poly(ethylene terephthalate) composites additively manufactured with fused filament fabrication
Katalagarianakis, A., Van de Voorde, B., Pien, N., Polyzos, E., Duretek, I., Holzer, C., Cardon, L., Bernaerts, K. V., Van Hemelrijck, D., Van Vlierberghe, S. & Pyl, L., Dec 2022, In: Additive Manufacturing. 60.2022, Part A, December, 14 p., 103246.
Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...10 Next

Research Portal

Chair of Polymer Processing (350)

Research output

Contact information