Chair of Physical Metallurgy (420)

Organisational unit: Chair

101 - 150 out of 2,174Page size: 50

Research output

  1. 2023
  2. Published

    Impact of d‑states on transition metal impurity diffusion in TiN

    Nayak, G. K., Holec, D. & Zelený, M., 22 May 2023, In: Scientific reports (London : Nature Publishing Group). 2023, 13, 11 p., 8244.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Models of configurationally-complex alloys made simple

    Gehringer, D., Friák, M. & Holec, D., May 2023, In: Computer physics communications. 286.2023, May, 11 p., 108664.

    Research output: Contribution to journal › Article › Research › peer-review

  4. E-pub ahead of print

    On correlations between local chemistry, distortions and kinetics in high entropy nitrides: An ab initio study

    Nayak, G. K., Kretschmer, A., Mayrhofer, P. H. & Holec, D., 19 Apr 2023, (E-pub ahead of print) In: Acta materialia. 255.2023, 15 August, 9 p., 118951.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Strengthening effect of NiAl and Ni3Ti precipitates in Co-free maraging steels

    Zeisl, S., Van Steenberge, N. & Schnitzer, R., 19 Apr 2023, In: Journal of materials science. 58.2023, April, p. 7149–7160 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Glide and mixed climb dislocation velocity in γ-TiAl investigated by in-situ transmission electron microscopy

    Galy, B., Musi, M., Hantcherli, M., Molénat, G., Couret, A., Spörk-Erdely, P., Clemens, H. & Monchoux, J.-P., 15 Apr 2023, In: Scripta materialia. 228.2023, 15 April, 8 p., 115333.

    Research output: Contribution to journal › Article › Research › peer-review

  7. E-pub ahead of print

    Interstitial segregation has the potential to mitigate liquid metal embrittlement in iron

    Ahmadian, A., Scheiber, D., Zhou, X., Gault, B., Romaner, L., Kamachali, R. D., Ecker, W., Dehm, G. & Liebscher, C., 8 Apr 2023, (E-pub ahead of print) In: Advanced materials. 35.2023, 28, 11 p., 2211796.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Phase stability of TiAl-based BCC high entropy alloys

    Hatzenbichler, L., Zeisl, S., Clemens, H. & Holec, D., 7 Apr 2023, In: Intermetallics. 158.2023, July, 9 p., 107893.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Strength determination for rough substrate-coating interfaces with three-dimensional defect structure

    Klünsner, T., Krobath, M., Konetschnik, R., Tritremmel, C., Maier-Kiener, V., Samardzic, D., Ecker, W., Czettl, C., Mitterer, C. & Kiener, D., Apr 2023, In: International journal of refractory metals & hard materials. 112.2023, April, 10 p., 106149.

    Research output: Contribution to journal › Article › Research › peer-review

  10. E-pub ahead of print

    Phosphorus and transition metal co-segregation in ferritic iron grain boundaries and its effects on cohesion

    Mai, H. L., Cui, X.-Y., Scheiber, D., Romaner, L. & Ringer, S. P., 20 Mar 2023, (E-pub ahead of print) In: Acta materialia. 250.2023, 15 May, 17 p., 118850.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    A TEM study of a dislocations in the ßo phase of an intermetallic TNM-TiAl alloy

    Molénat, G., Monchoux, J.-P., Musi, M., Spörk-Erdely, P., Clemens, H. & Couret, A., 15 Mar 2023, In: Scripta materialia. 226.2023, 15 March, 6 p., 115247.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Influence of focus offset on the microstructure of an intermetallic γ-TiAl based alloy produced by electron beam powder bed fusion

    Ghibaudo, C., Wartbichler, R., Marchese, G., Clemens, H., Ugues, D. & Biamino, S., 3 Mar 2023, In: Journal of manufacturing processes. 89.2023, 3 March, p. 132-141 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Effect of boron doping on grain boundary cohesion in technically pure molybdenum investigated via meso-scale three-point-bending tests

    Jakob, S., Hohenwarter, A., Lorich, A., Knabl, W., Pippan, R., Clemens, H. & Maier-Kiener, V., 2 Mar 2023, In: International journal of refractory metals & hard materials. 113.2023, June, 4 p., 106173.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Exploring the anneal hardening phenomenon in nanocrystalline Pt-Ru alloys

    Renk, O., Hohenwarter, A., Maier-Kiener, V. & Pippan, R., 15 Feb 2023, In: Journal of alloys and compounds. 935.2023, Part 1, 15 February, 11 p., 168005.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Probing the composition dependence of residual stress distribution in tungsten-titanium nanocrystalline thin films

    Sinojiya, R. J., Paulachan, P., Falah Chamasemani, F., Bodlos, R., Hammer, R., Zalesak, J., Reisinger, M., Scheiber, D., Keckes, J., Romaner, L. & Brunner, R., 15 Feb 2023, In: Communications materials. 2023, 4, 12 p., 11.

    Research output: Contribution to journal › Article › Research › peer-review

  16. E-pub ahead of print

    Inverse parameter determination for metal foils in multifunctional composites

    Trost, C. O. W., Krobath, M., Žák, S., Hammer, R., Krivec, T., Gänser, H.-P., Trost, T. W., Hohenwarter, A. & Cordill, M. J., 9 Feb 2023, (E-pub ahead of print) In: Materials and Design. 227.2023, March, 13 p., 111711.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Spontaneous formation of carbon dots helps to distinguish molecular fluorophores species

    Gómez, I. J., Vazquez Sulleiro, M., Pizúrová, N., Bednařík, A., Lepcio, P., Holec, D., Preisler, J. & Zajickkova, L., 1 Feb 2023, In: Applied surface science. 610.2023, 1 February, 9 p., 155536.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Enhancing mechanical properties of ultrafine-grained tungsten for fusion applications

    Wurmshuber, M., Doppermann, S., Wurster, S., Jakob, S., Balooch, M., Alfreider, M., Schmuck, K. S., Bodlos, R., Romaner, L., Hosemann, P., Clemens, H., Maier-Kiener, V. & Kiener, D., Feb 2023, In: International journal of refractory metals & hard materials. 111.2023, February, 7 p., 106125.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Fully coupled segregation and precipitation kinetics model with ab initio input for the Fe-Au system

    Scheiber, D., Svoboda, J., Fischer, F.-D., Böhm, H. J. & Romaner, L., 1 Jan 2023, In: Acta materialia. 244.2023, 1 January, 11 p., 118577.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Temperature dependence of solute segregation energies at W GBs from first principles

    Scheiber, D., Popov, M. N. & Romaner, L., 1 Jan 2023, In: Scripta materialia. 222.2023, 1 January, 5 p., 115059.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Evolution of nano-pores during annealing of technically pure molybdenum sheet produced from different sintered formats

    Jakob, S., Lorich, A., Knabl, W., Stark, A., Staron, P., Clemens, H. & Spörk-Erdely, P., Jan 2023, In: International journal of refractory metals & hard materials. 110.2023, January, 7 p., 106032.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Ab initio discovery of novel hydride phases in NiTi shape memory alloys

    Paulik, A., 2023

    Research output: Thesis › Master's Thesis

  23. Published

    A comprehensive study on the metallographic preparation of W-Re samples for high resolution electron-based microscopy

    Sommerauer, M., Clemens, H., Maier-Kiener, V. & Siller, M., 2023, Pract. Metallograp.. Vol. 60. p. 171-186

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    A Multi-method Atomistic Study of Protective Nitride Coatings: from Crystalline to Amorphous Materials

    Nayak, G. K., 2023

    Research output: Thesis › Doctoral Thesis

  25. Published

    Anneal hardening in single phase nanostructured metals

    Renk, O. & Pippan, R., 2023, In: Materials transactions. 64.2023, 7, p. 1464-1473 10 p.

    Research output: Contribution to journal › Review article › peer-review

  26. Published

    Atomistic approaches for investigating planar defects in compositionally complex alloys

    Gehringer, D., 2023

    Research output: Thesis › Doctoral Thesis

  27. Published

    Automatic detection of defects in KOH etch images of SiC single crystals using instance segmentation

    Holub, G., Hofer, S., Obermüller, T. & Romaner, L., 2023.

    Research output: Contribution to conference › Poster › Research

  28. Published

    Ballistic tests on hot-rolled Ti-6Al-4V plates: Experiments and numerical approaches

    Janda, A., Ralph, B., Demarty, Y., Sorger, M., Ebenbauer, S., Prestl, A., Siller, I., Stockinger, M. & Clemens, H., 2023, In: Defence Technology. 26.2023, August, p. 39-53 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    CCT diagrams of high-strength weld metal

    Marin Morales, D., 2023

    Research output: Thesis › Master's Thesis

  30. Published

    Characterization of high alloyed steel composites under ballistic impact

    Job, V., 2023

    Research output: Thesis › Master's Thesis

  31. Published

    Computational analysis of chemical vapor deposition for nitride-based hard coatings

    Wurmitzer, M., 2023

    Research output: Thesis › Master's Thesis

  32. Published

    Deriving a Model for Catalytic Methane Pyrolysis: A DFT Study

    Pototschnig, U., 2023

    Research output: Thesis › Master's Thesis

  33. Published

    DFT modelling of crystallographic defects in SiC polytypes

    Rajabzadeh, Z., Halkali, C., Hammer, R. & Romaner, L., 2023.

    Research output: Contribution to conference › Poster › Research

  34. Published

    Efficient descriptors and active learning for grain boundary segregation

    Dösinger, C. A., Hodapp, M., Peil, O., Reichmann, A., Razumovskiy, V. I., Scheiber, D. & Romaner, L., 2023, In: Physical review materials . 7.2023, 11, 11 p., 113606.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Evaluation of Microstructure and Mechanical Properties of a Precipitation Strengthened Compositionally Complex Alloy

    Biermair, F., 2023

    Research output: Thesis › Doctoral Thesis

  36. Published

    Exploration of phase transformations in lightweight structural materials by means of in situ high-energy X-ray methods

    Graf, G., 2023

    Research output: Thesis › Doctoral Thesis

  37. Published

    Hochfeste metallpulver- und schweißpulvergefüllte Fülldrähte mit einer Streckgrenze über 690 Mpa - Ein Überblick

    Pahr, H. & Schrittwieser, D., 2023, In: Schweiß- & Prüftechnik. 2023, ???

    Research output: Contribution to journal › Article › Research

  38. Published

    Hyperbaric Welding and Wire Arc Additive Manufacturing for Downhole Applications in the Oil and Gas Industry

    Escobar, S. M. L., Walzl, A., Ravi, K., Prohaska, M., Stockinger, M., Richardson, I. M., Fateh, N. & Hönig, S., 2023, Society of Petroleum Engineers - SPE/IATMI Asia Pacific Oil and Gas Conference and Exhibition, APOG 2023. Society of Petroleum Engineers , (Society of Petroleum Engineers - SPE/IATMI Asia Pacific Oil and Gas Conference and Exhibition, APOG 2023).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Influence of Temperature and Microstructure on the Magnetic Properties of Induction Heat Treated Steels

    Jaszfi, V., 2023

    Research output: Thesis › Doctoral Thesis

  40. Published

    Influence of vacancies on the N K-edge ELNES response of fcc Tantalum nitrides: Ab initio study

    Vukusic, A., 2023

    Research output: Thesis › Master's Thesis

  41. Published

    In-Situ HT-EBSD Measurements and Calibration of Multi-class Model for Grain Growth and δ-phase Dissolution Kinetics of Alloy 718

    Raninger, P., Gruber, C., Costin, W., Stanojevic, A., Kozeschnik, E. & Stockinger, M., 2023, Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives, 2023. Ott, E. A., Andersson, J., Sudbrack, C., Bi, Z., Bockenstedt, K., Dempster, I., Fahrmann, M., Jablonski, P., Kirka, M., Liu, X., Nagahama, D., Smith, T., Stockinger, M. & Wessman, A. (eds.). p. 93-106 14 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Interatomic potentials with ab-initio accuracy for defect and growth simulations in SiC

    Halkali, C., Rajabzadeh, Z. & Romaner, L., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Intercritical annealing of a PH 13-8 Mo maraging steel

    Rosenauer, A., Brandl, D., Ressel, G., Stadler, M., Stockinger, M. & Schnitzer, R., 2023, 28th IFHTSE 2023 Congress. (28th IFHTSE 2023 Congress).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Interkritisches Glühen eines PH 13-8 Mo Maraging-Stahles

    Teusl, S., 2023

    Research output: Thesis › Master's Thesis

  45. Published

    Interplay between carbon structures and their surface functionalization for improved hydrogen storage

    Leiner, T., 2023.

    Research output: Contribution to conference › Poster › Research

  46. Published

    Local Assessment of Mechanical Properties in Forged Alloy 718 Components Based on the Simulation of the Microstructure Evolution During Production

    Gruber, C., Raninger, P., Stanojevic, A., Godor, F., Gänser, H. P., Marsoner, S. & Stockinger, M., 2023, Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives, 2023. Ott, E. A., Andersson, J., Sudbrack, C., Bi, Z., Bockenstedt, K., Dempster, I., Fahrmann, M., Jablonski, P., Kirka, M., Liu, X., Nagahama, D., Smith, T., Stockinger, M. & Wessman, A. (eds.). p. 49-63 15 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Mikrostrukturelle Charakterisierung und Untersuchung des Hochtemperatur-Umformverhaltens einer mit Bor modifizierten (α+β)-Titanlegierung

    Taucher, L., 2023

    Research output: Thesis › Master's Thesis

  48. Published

    Modification of the Cu/W interface cohesion by segregation

    Bodlos, R., Scheiber, D., Spitaler, J. & Romaner, L., 2023, In: Metals : open access journal . 13.2023, 2, 16 p., 346.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Physics-informed neural network for predicting Gibbs free energy

    Vincely, C., Sakic, A., Dave, V., Povoden-Karadeniz, E., Rückert, E. & Holec, D., 2023.

    Research output: Contribution to conference › Poster › Research

  50. Published

    Polycrystal diffraction elastic constants of advanced γ-TiAl based materials

    Obersteiner, D. & Spörk-Erdely, P., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    Precipitate evolution in an iron-based superalloy

    Jelinek, A., Renk, O., Juarez Perez, L., Platl, J. & Schnitzer, R., 2023.

    Research output: Contribution to conference › Poster › Research

Previous 1 2 3 4 5 6 7 8 ...44 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben