Chair of Physical Metallurgy (420)

Organisational unit: Chair

701 - 750 out of 2,174Page size: 50

Research output

  1. 2016
  2. Published

    Kriechverhalten einer TiAl-Legierung für Anwendungen in Abgasturboladern

    Kappacher, J., 2016

    Research output: Thesis › Master's Thesis

  3. Published

    Local Characterization Tools as the Key for Optimized Performance of Hard Coatings: Towards a comprehensive understanding of microstructure-property-performance relations of hard coatings and thin films

    Mitterer, C., 2016.

    Research output: Contribution to conference › Presentation › Research

  4. Published

    Metallographie & Werkstoffentwicklung: Eine persönliche Bestandsaufnahme

    Clemens, H., 2016.

    Research output: Contribution to conference › Presentation › Research

  5. Published

    Microstructural and mechanical characterization of a hot-extruded TiAl alloy for high-performance racing applications

    Lehmann, O., Burtscher, M., Klein, T., Lindemann, J., Güther, V., Fellmann, H. & Clemens, H., 2016.

    Research output: Contribution to conference › Presentation › Research

  6. Published

    Microstructural characterization of ultra-high strength steel welds by means of Light Optical Microscopy and Electron Backscatter Diffraction

    Haslberger, P., Weißensteiner, I., Clemens, H., Ernst, W. & Schnitzer, R., 2016.

    Research output: Contribution to conference › Poster › Research

  7. Published

    Microstructure, mechanical and optical properties of TiAlON coatings sputter-deposited with varying oxygen partial pressures

    Schalk, N., Simonet Fotso, J., Holec, D., Fian, A., Jakopic, G., Terziyska, V., Daniel, R. & Mitterer, C., 2016, In: Journal of physics / D, Applied physics. 49, p. 1-9 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Modeling Concepts for Intermetallic Titanium Aluminides

    Appel, F., Clemens, H. & Fischer, F. D., 2016, In: Progress in materials science. 81, p. 55-124

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Mo-Re thin films for flexible display applications

    Hauser, F., Jörg, T., Lorenz, R., Cordill, M. J., Franz, R., Köstenbauer, H., Winkler, J. & Mitterer, C., 2016.

    Research output: Contribution to conference › Presentation › Research

  10. Published

    Morphology change of retained austenite during austempering of carbide-freebainiticsteel

    Hofer, C., Winkelhofer, F., Clemens, H. & Primig, S., 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 664, p. 236-246 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Multi-descriptive scale-bridging modelingof hierarchical bio-composites

    Friak, M., Pfanner, G., Fikar, J., Petrov, M., Nikolov, S., Holec, D., Fabritius, H.-O., Raabe, D., Sob, M., Ziegler, A. & Neugebauer, J., 2016.

    Research output: Contribution to conference › Presentation › Research

  12. Published

    Multiscale approach for predicting mechanical properties of interfaces

    Holec, D., Friak, M., Vsianska, M., Tytko, D., Raabe, D., Sob, M., Neugebauer, H. & Neugebauer, J., 2016.

    Research output: Contribution to conference › Presentation › Research

  13. Published

    Nanoindentation testing as a tool for assessing the microstructure-property relationship of ultrafine grained and single crystalline HEAs

    Maier-Kiener, V., Schuh, B., George, E., Clemens, H. & Hohenwarter, A., 2016.

    Research output: Contribution to conference › Presentation › Research

  14. Published

    Nanokristalline High-Entropy Legierungen

    Hohenwarter, A., Schuh, B., Völker, B., Pippan, R., Maier-Kiener, V., Clemens, H. & George, E. P., 2016.

    Research output: Contribution to conference › Presentation › Research

  15. Published

    Nitrierverhalten einer Fe-Co-Mo-V Legierung

    Hofinger, M., 2016

    Research output: Thesis › Diploma Thesis

  16. Published

    On the chemistry of the carbides in a molydbenum base Mo-Hf-C alloy produced by powder metallurgy

    Lang, D., Pöhl, C., Holec, D., Schatte, J., Povoden-Karadeniz, E., Knabl, W., Clemens, H. & Primig, S., 2016, In: Journal of alloys and compounds. 654, p. 445-454

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    On the evolution of secondary hardening carbides during continuous versus isothermal heat treatment of high speed steel HS 6-5-2

    Sackl, S. C., Leitner, H., Clemens, H. & Primig, S., 2016, In: Materials characterization. p. 323-330 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Phase Characterization of a Biocompatible Co-Cr-W Alloy Via Correlative Microscopy

    Weißensteiner, I., Voigt, P., Maier-Kiener, V. & Clemens, H., 2016, In: Practical metallography = Praktische Metallographie. 53, 7, p. 450-461 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Phasencharakterisierung mittels korrelativer Mikroskopie an einer biokompatiblen Co-Cr-W Legierung

    Weißensteiner, I., Voigt, P., Maier-Kiener, V. & Clemens, H., 2016, Sonderbände der Praktischen Metallographie: Fortschritte in der Metallographie. Vol. 48. p. 151-156 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Point defects stabilise cubic Mo-N and Ta-N

    Koutna, N., Holec, D., Svoboda, O., Klimashin, F. & Mayrhofer, P. H., 2016.

    Research output: Contribution to conference › Poster › Research

  21. Published

    Point defects stabilise cubic Mo-N and Ta-N

    Koutna, N., Holec, D., Svoboda, O., Klimashin, F. & Mayrhofer, P. H., 2016, In: Journal of physics / D, Applied physics. p. 375303-1 - 375303-8 8 p.

    Research output: Contribution to journal › Article › Research

  22. Published

    Precipitation-strengthened high-temperature ferrites

    Godor, F., Liebscher, C., Stein, F., Palm, M., Rashkova, B., Maier-Kiener, V., Mayer, S. & Clemens, H., 2016.

    Research output: Contribution to conference › Presentation › Research

  23. Published

    Predicting an alloying strategy for improving fracture toughness of C15 NbCr2 Laves phase: A first-principles study

    Long, Q., Wang, J., Du, Y., Holec, D., Nie, X. & Jin, Z., 2016, In: Computational materials science. 123, p. 59-64 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Preferential site occupancy of alloying elements in TiAl-based phases

    Holec, D., Reddy, R. K., Klein, T. & Clemens, H., 2016, In: Journal of applied physics. 119, p. 1-6 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Preparation Methods for Examining the ωo-Phase Formation in a β-Solidifying TiAl Alloy via Atom Probe Tomography

    Schachermayer, M., Klein, T., Clemens, H. & Mayer, S., 2016, In: Practical metallography = Praktische Metallographie. 53, 2, p. 73-85 13 p., 53 (2016) 2.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Risse in feuerverzinkten Stahlbauteilen

    Freitag, C. & Panzenböck, M., 2016.

    Research output: Contribution to conference › Presentation › Research

  27. Published

    Risse in feuerverzinkten Stahlbauteilen

    Freitag, C. & Panzenböck, M., 2016, Sonderband der Praktischen Metallographie: Fortschritte in der Metallographie. DGM, Vol. 48. p. 131-136 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    SEM and FIB-SEM investigations on potential gas shales in the Dniepr-Donets Basin (Ukraine): Pore space evolution in organic matter during thermal maturation

    Misch, D., Mendez Martin, F., Hawranek, G., Onuk, P., Groß, D. & Sachsenhofer, R., 2016, In: IOP Conference Series: Materials Science and Engineering. 109, doi:10.1088/1757-899X/109/1/012010

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Silicon distribution and silicide precipitation during annealing in an advanced multi-phase g-TiAl based alloy

    Klein, T., Rashkova, B., Holec, D., Clemens, H. & Mayer, S., 2016, In: Acta materialia. 110, p. 236-245 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Silicon distribution and silicide precipitation in an advanced multi-phase γ-TiAl based alloy during annealing

    Klein, T., Rashkova, B., Holec, D., Clemens, H. & Mayer, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  31. Published

    Small scale deformation behavior of Au – influence of microstructure and temperature

    Maier-Kiener, V., Leitner, T., Kiener, D. & Pippan, R., 2016.

    Research output: Contribution to conference › Presentation › Research

  32. Published

    Spatial material heterogeneity: A strategy for fracture toughness enhancement of nanostructured films

    Daniel, R., Zalesak, J., Mitterer, C., Sartory, B., Meindlhumer, M. & Keckes, J., 2016.

    Research output: Contribution to conference › Presentation › Research

  33. Published

    Specimen preparation to analyze the fracture surface of nanocrystalline pearlite

    Sackl, S. C., Leitner, T., Turk, C., Riedl, H. & Clemens, H., 2016.

    Research output: Contribution to conference › Presentation › Research

  34. Published

    Sputter-deposited Mo thin films with improved fracture behaviorfor flexible electronics

    Jörg, T., Cordill, M. J., Franz, R., Glushko, O., Winkler, J. & Mitterer, C., 2016.

    Research output: Contribution to conference › Presentation › Research

  35. Published

    Status of Titanium Aluminide for Aero Engine Applications

    Clemens, H., Schloffer, M. & Smarsly, W., 2016.

    Research output: Contribution to conference › Presentation › Research

  36. Published

    Strain-induced martensitic transformation in a Co-Cr-W alloy studied by in-situ HEXRD experiments

    Weißensteiner, I., Erdely, P., Voigt, P., Clemens, H. & Maier-Kiener, V., 2016.

    Research output: Contribution to conference › Poster › Research

  37. Published

    Structural and mechanical properties of nitrogen-deficient cubic Cr–Mo–N and Cr–W–N systems

    Zhou, L., Klimashin, F., Holec, D. & Mayrhofer, P. H., 2016, In: Scripta materialia. 123, p. 34-37 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Structure evolution in reactively sputtered molybdenum oxide thin films

    Pachlhofer, J., Jachs, C., Franz, R., Franzke, E., Köstenbauer, H., Winkler, J. & Mitterer, C., 2016, In: Vacuum. 131, p. 246-251 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Structure-property relationship of continuously heat treated steels

    Sackl, S. C., 2016

    Research output: Thesis › Doctoral Thesis

  40. Published

    Structure-stress relationships in nanocrystalline multi-layered AlCrN coatings studied by cross-sectional X-ray nanodiffraction

    Klima, S., Jäger, N., Hruby, H., Mitterer, C., Keckes, J. & Daniel, R., 2016.

    Research output: Contribution to conference › Poster › Research

  41. Published

    Surface adsorption phenomena from first principles

    Holec, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  42. Published

    Tensorialelastic properties and mechanical stability of S5(210) grain-boundary complexions in Ni3Al from ab initiocalculations

    Friak, M., Vsianska, M., Holec, D. & Sob, M., 2016.

    Research output: Contribution to conference › Presentation › Research

  43. Published

    Texture evolution in multi-phase TNM sheet materials measured by means of high-energy X-ray diffraction

    Erdely, P., Staron, P., Maawad, E., Schell, N., Güther, V., Clemens, H. & Mayer, S., 2016.

    Research output: Contribution to conference › Poster › Research

  44. Published

    The electro-mechanical behavior of sputter- deposited Mo thin films on flexible substrates

    Jörg, T., Cordill, M., Franz, R., Glushko, O., Winkler, J. & Mitterer, C., 2016, In: Thin solid films. 606, p. 45-50 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Theory-guided materials design based on ab initio calculations

    Friak, M., Holec, D., Sob, M., Raabe, D. & Neugebauer, J., 2016.

    Research output: Contribution to conference › Presentation › Research

  46. Published

    Thermomechanische Prozessführung der Molybdänbasislegierung MHC (Mo-Hf-C)

    Lang, D., 2016

    Research output: Thesis › Doctoral Thesis

  47. Published

    Thermo-physical properties of wear resistant hard coatings

    Tkadletz, M., Schalk, N., Pohler, M., Czettl, C. & Mitterer, C., 2016.

    Research output: Contribution to conference › Presentation › Research

  48. Published

    Verfestigung und Rekristallisation der Molybdänbasislegierung MHC bei ein- und mehrstufigen Umformprozessen

    Siller, M., 2016

    Research output: Thesis › Diploma Thesis

  49. Published

    Wirkung von Aluminium in Schnellarbeitsstählen

    Kellezi, G., 2016

    Research output: Thesis › Doctoral Thesis

  50. 2015
  51. Published

    Improving the creep behavior and microstructural stability of an advanced γ-TiAl based alloy

    Kastenhuber, M., Rashkova, B., Mayer, S. & Clemens, H., 14 Dec 2015.

    Research output: Contribution to conference › Presentation › Research

  52. Published

    The effect of the discharge power on target poisoning and microstructure - property relations of reactively sputtered TiN coatings

    Saringer, C., Franz, R., Zorn, K. & Mitterer, C., Dec 2015.

    Research output: Contribution to conference › Poster › Research

Previous 1...11 12 13 14 15 16 17 18 ...44 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben