Chair of Physical Metallurgy (420)

Organisational unit: Chair

551 - 600 out of 2,174Page size: 50

Research output

  1. 2017
  2. Published

    Atom probe study of prior austenite grain bounda-ries of zinc-coated press hardened steel

    Hofer, C., Kurz, T., Clemens, H. & Schnitzer, R., 2017, 2017 CHS2 Conference Proceedings. p. 383-390

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Characterization of a Biocompatible Co-Cr-W Alloy by means of Correlative Microscopy and Nanoindentation Experiments

    Weißensteiner, I., Voigt, P., Clemens, H. & Maier-Kiener, V., 2017.

    Research output: Contribution to conference › Poster › Research

  4. Published

    Charakterisierung und Studie der Umformbarkeit einer biokompatiblen Kobalt-Chrom-Legierung

    Schütz, A. S., 2017

    Research output: Thesis › Diploma Thesis

  5. Published

    Contribution of High-Energy X-Rays and Neutrons to Characterization and Development of Intermetallic Titanium Aluminides

    Schmoelzer, T., Liss, K.-D., Staron, P., Stark, A., Schwaighofer, E., Lippmann, T., Clemens, H. & Mayer, S., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 395-424

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  6. Published

    Correlation of local mechanical properties and chemical compositin in a C-containing TiAl alloy studied by nanoindentation and atom probe tomography

    Klein, T., Schachermayer, M., Mendez Martin, F., Schöberl, T., Rashkova, B., Clemens, H. & Mayer, S., 2017.

    Research output: Contribution to conference › Poster › Research

  7. Published

    Deformation mechanisms and texture evolution in a multi-phase TiAl alloy investigated by means of synchrotron radiation

    Erdely, P., Staron, P., Maawad, E., Schell, N., Klose, J., Mayer, S. & Clemens, H., 2017.

    Research output: Contribution to conference › Poster › Research

  8. Published

    Deformation mechanisms during severe plastic deformation of a CueAg composite

    Kormout, K., Ghosh, P., Maier-Kiener, V. & Pippan, R., 2017, In: Journal of alloys and compounds. 695, p. 2285-2294 10 p.

    Research output: Contribution to journal › Article › Research

  9. Published

    Effect of hot rolling and primary annealing on the microstructure and texture of a β-stabilised γ-TiAl based alloy

    Erdely, P., Staron, P., Maawad, E., Schell, N., Klose, J., Mayer, S. & Clemens, H., 2017, In: Acta materialia. 126.2017, March, p. 145-153 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Effect of microstructural instability on the creep resistance of an advanced intermetallic γ-TiAl based alloy

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2017, In: Intermetallics. 80.2017, January, p. 1-9 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Einfluss des Siliziumgehalts auf Konstitution und Gefüge von γ-TiAl Hochtemperaturlegierungen

    Wimler, D., 2017

    Research output: Thesis › Master's Thesis

  12. Published

    Einfluss von Cu auf die Gefügeausbildung von Super Duplex Stählen

    Gsellmann, M., 2017

    Research output: Thesis › Diploma Thesis

  13. Published

    Entwicklung einer γ-TiAl-Basislegierung für die Herstellung von Turboladerlaufrädern mittels Metallpulverspritzgießen

    Zechmann, N., 2017

    Research output: Thesis › Diploma Thesis

  14. Published

    Entwicklung intermetallischer TNM-Basislegierungen mit erhöhter Anwendungstemperatur

    Kastenhuber, M., 2017

    Research output: Thesis › Doctoral Thesis

  15. Published

    Experimental and computational approach to evaluate the effect of leveling on the change of tensile properites of heavy steel plates

    Kaltenbrunner, T., Ecker, W., Antretter, T., Kaiser, R., Parteder, E. & Egger, R., 2017, AIP Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    First Principles Study of Water-Based Self-Assembled Nanobearing Effect in CrN/TiN Multilayer Coatings

    Holec, D., Paulitsch, J. & Mayrhofer, P. H., 2017, Solid State Phenomena. 258 ed. p. 373-378 6 p. (Solid State Phenomena).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  17. Published

    Fliegende Zähne - Ablösung von Schneidsegmenten bei einer Trenneinrichtung

    Panzenböck, M. & Stergar, E., 2017, Praktische Metallographie Sonderband 51. p. 93-98

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Fundamental Approaches in Alloy and Microstructure Design for Intermetallic γ-TiAl Based Alloys

    Klein, T., 2017

    Research output: Thesis › Doctoral Thesis

  19. Published

    Influence of thermal processing on microstructure, strength and ductility of steels for cold heading applications

    Pfleger, B., 2017

    Research output: Thesis › Master's Thesis

  20. Published

    In situ Experiments with Synchrotron High-Energy X-rays and Neutrons

    Staron, P., Fischer, T., Lippmann, T., Stark, A., Daneshpour, S., Schnubel, D., Uhlmann, E., Gerstenberger, R., Camin, B., Reimers, W., Eidenberger, E., Clemens, H., Huber, N. & Schreyer, A., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 365-376

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  21. Published

    Interaction of precipitation, recovery and recrystallization in the Mo-Hf-C alloy MHC studied by multipass compression tests

    Siller, M., Lang, D., Schatte, J., Knabl, W., Clemens, H. & Maier-Kiener, V., 2017, 19th Plansee Seminar. p. 21/1-21/10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Korngrenzenanalysen mittels Atomsondentomographie an gesintertem Molybdän

    Lutz, D., 2017

    Research output: Thesis › Master's Thesis

  23. Published

    Mechaniical and structural properties of CrN/AlN superlattices

    Holec, D., Friák, M., Bartosik, M. & Mayrhofer, P. H., 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Microstructure and Properties of Engineering Materials

    Clemens, H., Mayer, S. & Scheu, C., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 3-20

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  25. Published

    Nanoindentation testing as a powerful screening tool for assessing phase stability of nanocrystalline high-entropy alloys

    Maier-Kiener, V., Schuh, B., George, E. P., Clemens, H. & Hohenwarter, A., 2017, In: Materials and Design. 115.2017, 5 February, p. 479-485 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications

    Staron, P., Schreyer, A., Clemens, H. & Mayer, S., 2017, 2 ed. Wiley-VCH . 462 p.

    Research output: Book/Report › Scholarly edition

  27. Published

    Non-reactively sputtered ultra-high temperature Hf-C and Ta-C coatings

    Lasfargues, H., Glechner, T., Koller, C., Paneta, V., Primetzhofer, D., Kolozsvari, S., Holec, D., Riedl, H. & Mayrhofer, P. H., 2017, In: Surface & coatings technology. 309.2017, 15 January, p. 436-444 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Optimised structural models of solid slotions for tensorial properties

    Nöger, D. & Holec, D., 2017.

    Research output: Contribution to conference › Poster › Research

  29. Published

    Phase composition and thermal stability of arc evaporated Ti1 − xAlxN hard coatings with 0.4 ≤ x ≤ 0.67

    Großmann, B., Schalk, N., Czettl, C., Pohler, M. & Mitterer, C., 2017, In: Surface & coatings technology. 309.2017, 15 January, p. 687-693 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Physical metallurgy of the molybdenum base alloy MHC

    Lang, D., Schatte, J., Knabl, W. & Clemens, H., 2017, 19th Plansee Seminar. p. 5/1-5/9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Quantum-mechanical study of tensorial elastic and high-temperature thermodynamic properties of grain boundary states in superalloy-phase Ni3Al

    Friák, M., Vsianska, M., Holec, D. & Šob, M., 2017, In: IOP Conference Series: Materials Science and Engineering. 219.2017, 11 p., 012019.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Schwingfestigkeit eines Edelstahls in Wasser und wässrigem chloridhältigen Medium

    Ebner, A., 2017

    Research output: Thesis › Diploma Thesis

  33. Published

    Strength of WC-Co hard metals as a function of the effectively loaded volume

    Jonke, M., Klünsner, T., Supancic, P., Harrer, W., Glätzle, J., Barbist, R. & Ebner, R., 2017, In: International journal of refractory metals & hard materials. 64, p. 219-224 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    The effects of alloying elements on the microstructure of Al-rich TiAl alloys

    Wartbichler, R., 2017

    Research output: Thesis › Diploma Thesis

  35. Published

    Thermal expansion of Ti-Al-N and Cr-Al-N coatings

    Bartosik, M., Holec, D., Apel, D., Klaus, M., Genzel, C., Keckes, J., Arndt, M., Polcik, P., Koller, C. M. & Mayrhofer, P. H., 2017, In: Scripta materialia. 127.2017, 15 January, p. 182-185 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Thermodynamic evaluation of the Mo-rich corner of the Mo-Hf-C system including O impurities

    Lang, D., Povoden-Karadeniz, E., Schatte, J., Knabl, W., Clemens, H. & Primig, S., 2017, In: Journal of alloys and compounds. 695.2017, 25 February, p. 372-381 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    The role of grain boundaries and segregation effects in molybdenum and its alloys

    Leitner, K., 2017

    Research output: Thesis › Doctoral Thesis

  38. Published

    Untersuchungen des Ausscheidungsverhaltens von H-Karbiden in einer kohlenstoffhaltigen TiAl Legierung mittels in- und ex-situ Experimenten

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 2017, Praktische Metallographie Sonderband 51. p. 55-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Untersuchungen zum Ausscheidungsverhalten von H-Karbiden in einer TiAl-Legierung

    Kirchheimer, K., 2017

    Research output: Thesis › Master's Thesis

  40. Published

    Vacancy-driven extended stability of cubic metastable Ta-Al-N and Nb-Al-N phases

    Pacher, F., Mayrhofer, P. H. & Holec, D., 2017, In: Surface & coatings technology. 326.2017, 15 October, Part A, p. 37-44 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Werkstoffcharakterisierung mittels hochauflösender dreidimensionaler Atomsondentomographie

    Mayer, S., Maier-Kiener, V., Mendez Martin, F., Panzenböck, M., Rashkova, B. & Clemens, H., 2017, In: Jahresmagazin Materialographie, Metallographie : Ingenieurwissenschaften ... : im Fokus. 2017, p. 56-60 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. 2016
  43. Published

    Nanoindentation testing as a tool for assessing the microstructure-property relationship of ultrafine grained and single crystalline HEAs

    Maier-Kiener, V., Schuh, B., George, E., Clemens, H. & Hohenwarter, A., 29 Dec 2016.

    Research output: Contribution to conference › Presentation › Research

  44. E-pub ahead of print

    Extracting flow curves from nano-sized metal layers in thin film systems

    Kozic, D., Maier-Kiener, V., Konetschnik, R., Gänser, H.-P., Antretter, T., Brunner, R. & Kiener, D., 7 Dec 2016, (E-pub ahead of print) In: Scripta materialia. 130.2017, 15 March, p. 143-147 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. E-pub ahead of print

    Extraction of flow behavior and hall–petch parameters using a nanoindentation multiple sharp tip approach

    Leitner, A., Maier-Kiener, V. & Kiener, D., 29 Nov 2016, (E-pub ahead of print) In: Advanced engineering materials. 19.2017, 4, 9 p., 1600669.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Creep Behavior of a β-solidifying TiAl Alloy with Fully Lamellar Microstructure

    Burtscher, M., Klein, T., Mayer, S. & Clemens, H., 28 Nov 2016.

    Research output: Contribution to conference › Presentation › Research

  47. Published

    Atomistic pieces of the Materials Design jigsaw puzzle: From Schrödinger equation to thermal expansion

    Holec, D., 1 Nov 2016.

    Research output: Contribution to conference › Presentation › Research

  48. Published

    Improved ductility and toughness of an FeCoMo alloy

    Turk, C., Kellezi, G., Schemmel, I., Leitner, H. & Clemens, H., 5 Oct 2016.

    Research output: Contribution to conference › Presentation › Research

  49. E-pub ahead of print

    Grain boundary design of thin films: Using tilted brittle interfaces for multiple crack deflection toughening

    Daniel, R., Meindlhumer, M., Baumegger, W., Zalesak, J., Sartory, B., Burghammer, M. C., Mitterer, C. & Keckes, J., 2 Oct 2016, (E-pub ahead of print) In: Acta materialia. 122.2017, 1 January, p. 130-137 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Failure of Hot-Dip Galvanized Steel Parts : Versagen von feuerverzinkten Stahlbauteilen

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P. & Kaiser, R., Oct 2016, In: Practical metallography = Praktische Metallographie. 53.2016, 10, p. 641-651 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Interplay between sample size and grain size: Single crystalline vs. ultrafine-grained chromium micropillars

    Fritz, R., Maier-Kiener, V., Lutz, D. & Kiener, D., 30 Sept 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674.2016, 30 September, p. 626-633 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Advances in coating and thin film characterization

    Mitterer, C., 13 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

Previous 1...8 9 10 11 12 13 14 15 ...44 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben