Chair of Physical Metallurgy (420)

Organisational unit: Chair

51 - 100 out of 2,174Page size: 50

Research output

  1. 2024
  2. Published

    Atomistic investigations of SiC polytypes and creation of machine learning interatomic potential

    Reichmann, A., Rajabzadeh, Z., Halkali, C., Hammer, R. & Romaner, L., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  3. Published

    Automatic etch pit detection and characterization in KOH etch images of 4H-SiC using deep learning

    Holub, G., Hofer, S., Obermüller, T. & Romaner, L., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    Characterization of phase transformations and precipitation behavior in a novel Cu-enhanced near-α Ti alloy for additive manufacturing

    Obersteiner, D., Klein, T., Primig, S. & Musi, M., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  5. Published

    Charakterisierung der Mikro- und Nanostruktur eines hochlegierten, martensitischen Cr-Stahls

    Pferschy, M., 2024

    Research output: Thesis › Master's Thesis

  6. Published

    Comparison of omega particle size and interface in Ti-15Mo: APT vs. XRD

    Kozlik, J., Holý, V., Smilauerova, J. & Jelinek, A., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. Published

    Development of a machine learning-based interatomic potential for silicon carbide (SiC) using atomic cluster expansion (ACE)

    Halkali, C., Holub, G., Rajabzadeh, Z. & Romaner, L., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  8. Published

    Effect of Cu on the Carbide and Nitride Formation in Steels for High-Power Density Gears

    Böhle, S. I., 2024

    Research output: Thesis › Doctoral Thesis

  9. Published

    Einfluss von Ausforming auf die Mikrostruktur von PH13-8 Mo Maraging Stählen

    Krammer, K., 2024

    Research output: Thesis › Master's Thesis

  10. Published

    Hochauflösende Untersuchung der Nb-Löslichkeit in mikrolegierten Stählen

    Luger, T., 2024

    Research output: Thesis › Master's Thesis

  11. Published

    Hydrogen embrittlement in steels: state-of-the-art in theory and practice

    Graf, M., 2024

    Research output: Thesis › Master's Thesis

  12. Published

    Impact of measurement errors on machine learning models in steel production

    Rechberger, A., 2024

    Research output: Thesis › Master's Thesis

  13. Published

    Impact of the Wire Arc Additive Manufacturing (WAAM) process on the distortion and residual stress state of rapidly rotating components in solid/liquid separation

    Ruess, L., 2024

    Research output: Thesis › Master's Thesis

  14. Published

    Influence of Sc, Y, Ti, Zr, Hf, V, Nb, and Ta on structural and mechanical properties of Cr-Al-N coatings

    Mayrhofer, P., Zhou, L. & Holec, D., 2024, In: Berg- und hüttenmännische Monatshefte : BHM. 169.2024, 7, p. 375-380 6 p.

    Research output: Contribution to journal › Article › Research

  15. Published

    Integrated approach to SiC crystal growth: Multiphysics modeling and chemistry assessment in PVT furnaces

    Ramadan, Z., Obermüller, T., Hammer, R. & Romaner, L., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    Interface engineering at the nanoscale: Synthesis of low-energy boundaries

    Kapp, M., Eckert, J. & Renk, O., 2024, In: Advanced engineering materials. 26.2024, 19, 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Mechanical and electronic properties of monolayer TMDCs: A DFT study

    Ziegler, M., 2024

    Research output: Thesis › Master's Thesis

  18. Published

    Microstructural influences on bending resonance fatigue in nickel-based superalloy Rene'88DT

    Taurer, G., 2024

    Research output: Thesis › Master's Thesis

  19. Published

    Multiphysics simulations of PVT process for SiC growth

    Moya Merino, C., 2024

    Research output: Thesis › Master's Thesis

  20. Published

    NbC-Ausscheidungen in einem PH 15-5 Stahl

    Kaufmann, M., 2024

    Research output: Thesis › Master's Thesis

  21. Published

    Phase fraction and morphology of retained austenite in high-strength weld metal

    Rinnhofer, N., 2024

    Research output: Thesis › Master's Thesis

  22. Published

    Processing-structure-properties relationships of PH 13-8 Mo maraging steels

    Rosenauer, A., 2024

    Research output: Thesis › Doctoral Thesis

  23. Published

    Segregation analysis of a temper embrittled 51CrV4 with elevated trace element content for green steel production

    Teuschl, H., 2024

    Research output: Thesis › Master's Thesis

  24. Published

    Structure-property relationship of high-strength weld metal

    Schrittwieser, D., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  25. Published

    Untersuchung möglicher Anlassversprödung in perlitischen Stählen mit erhöhten Gehalten an Spurenelementen

    Stockinger, L.-M., 2024

    Research output: Thesis › Master's Thesis

  26. Published

    Using lab-XRD to verify successful electrochemical hydrogen charging for in-situ nanoindentation

    Jelinek, A., Zeiler, S. & Maier-Kiener, V., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. 2023
  28. Published

    Influence of MnS inclusion characteristics on generation of white etching cracks in 100Cr6 bearing steel

    Srikakulapu, K., Morsdorf, L., Gonzalez, I., Kölling, M., Broß, C., Ponge, D., Herbig, M. & Mayweg, D., 15 Dec 2023, In: Wear. 534-535.2023, 15 December, 16 p., 205129.

    Research output: Contribution to journal › Article › Research › peer-review

  29. E-pub ahead of print

    W18O49 Nanowhiskers Decorating SiO2 Nanofibers: Lessons from in situ SEM/TEM growth to large scale synthesis and fundamental structural understanding

    Kundrat, V., Bukvisova, K., Novak, L., Prucha, L., Houben, L., Zalesak, J., Vukusic, A., Holec, D., Tenne, R. & Pinkas, J., 5 Dec 2023, (E-pub ahead of print) In: Crystal growth & design. 24.2024, 1, p. 378-390 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Rejuvenation engineering in metallic glasses by complementary stress and structure modulation

    Şopu, D., Spieckermann, F., Bian, X., Fellner, S., Wright, J., Cordill, M., Gammer, C., Wang, G., Stoica, M. & Eckert, J., 24 Nov 2023, In: NPG Asia Materials. 2023, 15, 9 p., 61.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    sqsgenerator

    Holec, D. (Producer), Gehringer, D. (Producer) & Friák, M. (Producer), 21 Nov 2023

    Research output: Non-textual form › Software › Transfer

  32. Published

    Precipitation behaviour in AlMgZnCuAg crossover alloy with coarse and ultrafine grains

    Willenshofer, P., Tunes, M. A., Kainz, C., Renk, O., Kremmer, T., Gneiger, S., Uggowitzer, P. & Pogatscher, S., 15 Nov 2023, In: Materials Research Letters. 11.2023, 12, p. 1063-1072 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Emissivity measurements conducted on intermetallic γ-TiAl-based alloys for aeronautical applications

    Usategui, L., López-Ferreno, I., Echániz, T., Sainz-Menchón, M., Musi, M., Clemens, H. & López, G. A., 1 Nov 2023, In: Journal of Materials Research and Technology. 27.2023, November-December, p. 3170-3179 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. E-pub ahead of print

    Fabrication of bulk delta-phase Zirconium Hydride from Zircaloy-4 for use as moderators in microreactors

    Parkison, D., Tunes, M., Nizolek, T. J., Saleh, T. A., Hosemann, P. M. & Kohnert, C., 10 Oct 2023, (E-pub ahead of print) In: Scripta Materialia. 239.2024, 15 January, 7 p., 115771.

    Research output: Contribution to journal › Article › Research › peer-review

  35. E-pub ahead of print

    High-temperature microstructure evolution of an advanced intermetallic nano-lamellar γ-TiAl-based alloy and associated diffusion processes

    Nó, M. L., Klein, T., Clemens, H. & San Juan, J. M., 4 Oct 2023, (E-pub ahead of print) In: Acta materialia. 261.2023, 1 December, 13 p., 119380.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Precipitation behavior of hexagonal carbides in a C containing intermetallic γ-TiAl based alloy

    Burtscher, M., Weißensteiner, I., Wartbichler, R., Kirchheimer, K., Bernhard, C., Kiener, D. & Clemens, H., 4 Oct 2023, In: Journal of alloys and compounds. 969.2023, 25 December, 7 p., 172400.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Microstructural refinement by spontaneous recrystallization without prior deformation of a 15-5 PH steel alloy and its mechanism

    Ressel, G., Brandl, D., Hönigmann, T., Lukas, M., Stark, A., Gruber, C., Lukas, S., Stockinger, M. & Kozeschnik, E., 27 Sept 2023, In: Materials and Design. 234.2023, October, 11 p., 112370.

    Research output: Contribution to journal › Article › Research › peer-review

  38. E-pub ahead of print

    Assessment of different processing strategies to fabricate bulk Mg-Fe nanocomposites

    Roostaei, M., Uggowitzer, P., Pippan, R. & Renk, O., 12 Sept 2023, (E-pub ahead of print) In: Journal of Alloys and Metallurgical Systems. 4.2023, December, 9 p., 100034.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Machine learning mechanical properties of steel sheets from an industrial production route

    Millner, G., Mücke, M., Romaner, L. & Scheiber, D., Aug 2023, In: Materials. 30.2023, August, 11 p., 101810.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Revealing effects of solute Ta on solidification and precipitation of Al-7Si-0.3Mg based alloys

    Spacil, I., Holec, D., Albu, M. & LI, J., Aug 2023, In: Materialia. 30.2023, August, 17 p., 101846.

    Research output: Contribution to journal › Article › Research › peer-review

  41. E-pub ahead of print

    γ0.625pt′-size effect on the deformation microstructure and texture in a Ni-based superalloy using in-situ neutron diffraction

    Yan, Z., Srikakulapu, K., Gao, Y., Qin, H., Rong, Y., Bi, Z., Xie, Q., An, K., Wang, Y. & Tan, Q., 12 Jul 2023, (E-pub ahead of print) In: Scripta materialia. 236.2023, November, 5 p., 115665.

    Research output: Contribution to journal › Article › Research › peer-review

  42. E-pub ahead of print

    Alloying elements in intermetallic γ-TiAl based alloys – A review on their influence on phase equilibria and phase transformations

    Musi, M., Graf, G., Clemens, H. & Spörk-Erdely, P., 9 Jul 2023, (E-pub ahead of print) In: Advanced engineering materials. 26.2024, 4, 26 p., 2300610.

    Research output: Contribution to journal › Review article › peer-review

  43. Published

    Deformation and fatigue behaviour of additively manufactured Scalmalloy® with bimodal microstructure

    Schimbäck, D., Kaserer, L., Mair, P., Palm, F., Leichtfried, G. J., Pogatscher, S. & Hohenwarter, A., Jul 2023, In: International Journal of Fatigue. 172.2023, July, 14 p., 107592.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Effect of wire-arc directed energy deposition on the microstructural formation and age-hardening response of the Mg-9Al-1Zn (AZ91) alloy

    Graf, G., Spörk-Erdely, P., Maawad, E., Burtscher, M., Kiener, D., Clemens, H. & Klein, T., 30 Jun 2023, In: Journal of magnesium and alloys. 11.2023, 6, p. 1944-1958 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. E-pub ahead of print

    On energetics of allotrope transformations in transition-metal diborides via plane-by-plane shearing

    Leiner, T., Koutná, N., Janovec, J., Zelený, M., Mayrhofer, P. H. & Holec, D., 29 Jun 2023, (E-pub ahead of print) In: Vacuum. 215.2023, September, 9 p., 112329.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Segregation to α2/γ interfaces in TiAl alloys: A multiscale QM/MM study

    Gehringer, D., Huber, L., Neugebauer, J. & Holec, D., 23 Jun 2023, In: Physical review materials . 7.2023, 6, 14 p., 063604.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Precious metal amorphous AgAuSi: Alloy design by swapping gold for silver

    Weniger, L.-M., Gammer, C., Niewczas, M., Cordill, M. J., Spieckermann, F., Djemia, P., Faurie, D., Li, C.-H., Lassnig, A., Terziyska, V., Mitterer, C., Eckert, J. & Glushko, O., 17 Jun 2023, In: Materials and Design. 232.2023, August, 11 p., 112099.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Fatigue life assessment of metal foils in multifunctional composites via combined experiments and simulations

    Trost, C. O. W., Žák, S., Ruderes, K., Hammer, R., Rosc, J., Krivec, T., Schell, N., Gänser, H.-P., Hohenwarter, A. & Cordill, M. J., 15 Jun 2023, In: Composites Part B: Engineering. 259.2023, 15 June, 110715.

    Research output: Contribution to journal › Article › Research › peer-review

  49. E-pub ahead of print

    On the stability of Ti(Mn,Al)2 C14 Laves phase in an intermetallic Ti–42Al–5Mn alloy

    Graf, G., Seyffertitz, M., Spörk-Erdely, P., Clemens, H., Stark, A., Hatzenbichler, L., Holec, D., Burtscher, M., Kiener, D., Li, X. & Liu, K., 11 Jun 2023, (E-pub ahead of print) In: Intermetallics. 161.2023, October, 9 p., 107962.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Corrigendum to “Stabilization of Al3Zr allotropes in dilute aluminum alloys via the addition of ternary elements” [Materialia 21 (2022) 101321]

    Schmid, F., Gehringer, D., Kremmer, T., Cattini, L., Uggowitzer, P., Holec, D. & Pogatscher, S., Jun 2023, In: Materialia. 29.2023, June, 1 p., 101733.

    Research output: Contribution to journal › Comment/debate › peer-review

  51. Published

    In Situ Observations of the Microstructural Evolution during Heat Treatment of a PH 13-8 Mo Maraging Steel

    Rosenauer, A., Brandl, D., Ressel, G., Lukas, S., Gruber, C., Stockinger, M. & Schnitzer, R., Jun 2023, In: Advanced engineering materials. 25.2023, 12, 12 p., 2300410.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Severe plastic deformation close to the melting point enables Mg-Fe nanocomposites with exceptional strength

    Roostaei, M., Uggowitzer, P., Pippan, R. & Renk, O., Jun 2023, In: Scripta materialia. 230.2023, June, 5 p., 115428.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...44 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben