Chair of Nonferrous Metallurgy (520)

Organisational unit: Chair

251 - 300 out of 2,400Page size: 50

Research output

  1. 2021
  2. Published

    Thermodynamic Refractory Corrosion Model for Ferronickel Manufacturing

    Sagadin, C., Luidold, S., Wagner, C., Pichler, C., Kreuzer, D., Spanring, A., Antrekowitsch, H., Clarke, A. & Clarke, K., 24 Feb 2021, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52.2021, 2, p. 1052-1060 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Carbothermic Reduction of Zinc Containing Industrial Wastes: A Kinetic Model

    Leuchtenmüller, M., Legerer, C., Brandner, U. & Antrekowitsch, J., Feb 2021, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52, 1, p. 548-557 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Innovative Losung fur das Fluorproblem bei der hydrometallurgischen ZinkhersteNung in Kombination mit einer verstarkten Verwendung von Walzoxid als Ersatz fur Zinkblende-Rostoxid

    Steinlechner, S., Antrekowitsch, J. & Ludewig, F., 1 Jan 2021, In: World of Metallurgy - ERZMETALL. 74.2021, 1, p. 26-32 7 p.

    Research output: Contribution to journal › Review article › peer-review

  5. Published

    2sDR - the future solution for steel mill dust recycling

    Auer, M., Antrekowitsch, J., Voraberger, B., Pastucha, K. & Salgado, U., 2021, 11th European Metallurgical Conference – EMC. 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Alloying- and process-controlled texture and microstructure engineering in aluminum alloys

    Grasserbauer, J., 2021

    Research output: Thesis › Doctoral Thesis

  7. Published

    Carbon-reduced pyrometallurgical extraction of critical elements from jarosite and goethite

    Höber, L. & Steinlechner, S., 2021, Proceedings of EMC 2021.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Comparative irradiation response of an austenitic stainless steel with its high-entropy alloy counterpart

    Tunes, M., Greaves, G., Bei, H., Edmondson, P. D., Zhang, Y., Donnelly, S. E. & Schön, C. G., 2021, In: Intermetallics. 132.2021, May, 13 p., 107130.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Contacting Cobalt with vaporous Zinc

    Leitner, M., Luidold, S., Ebner, T., Czettl, C. & Storf, C., 2021.

    Research output: Contribution to conference › Paper › peer-review

  10. Published

    Crossover alloys: a new approach for future aluminum alloys

    Stemper, L., 2021

    Research output: Thesis › Doctoral Thesis

  11. Published

    Decomposition of hydrogen peroxide in selected organic acids

    Gerold, E., Luidold, S. & Antrekowitsch, H., 2021, Proceedings of EMC 2021.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Developing a refractory test method for Platinum-Group-Metals Smelters

    Tichy, S., 2021

    Research output: Thesis › Master's Thesis

  13. Published

    Development of a multi-metal process route to treat lead- and zinc-bearing residues

    Schatzmann, W., 2021

    Research output: Thesis › Doctoral Thesis

  14. Published

    Effect of impurity elements on the mechanical properties of aluminium crossover alloys

    Samberger, S., 2021.

    Research output: Contribution to conference › Poster › Research

  15. Published

    Einfluss der Clusterbildung auf die Aushärtung und das Umformverhalten von verschiedenen Aluminiumlegierungen

    Aster, P., 2021

    Research output: Thesis › Master's Thesis

  16. Published

    Entwicklung eines hydrometallurgischen Recyclingkonzeptes für Lithium-Ionen-Batterien

    Gerold, E., 2021

    Research output: Thesis › Doctoral Thesis

  17. Published

    Ermittlung der Desintegration von Hartmetallen unter Verwendung von dampfförmigem Zink

    Krenn, R., 2021

    Research output: Thesis › Master's Thesis

  18. Published

    Evaluation of the mechanisms of CO2-optimised chlorination reactions during the multi-metal recovery from precipitation residues of the zinc industry

    Lerche, R., 2021

    Research output: Thesis › Master's Thesis

  19. Published

    Heat treatment optimization and advanced alloy design for enhanced mechanical properties of AlMgSi alloys

    Schmid, F., 2021

    Research output: Thesis › Doctoral Thesis

  20. Published

    Influence of the Cemented Carbides Composition on the Disintegration in Liquid Zinc

    Ebner, T., Luidold, S., Czettl, C. & Storf, C., 2021, Ni-Co 2021: The 5th International Symposium on Nickel and Cobalt. Anderson, C., Goodall, G., Gostu, S., Gregurek, D., Lundström, M., Meskers, C., Nicol, S., Peuraniemi, E., Tesfaye, F., Tripathy, P. K., Wang, S. & Zhang, Y. (eds.). p. 329-343 15 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Microstructural characterization of neutron irradiated mineral concrete aggregates

    Arregui-Mena, J. D., Weber, J., Tunes, M. A., Torrence, C. E., Rosseel, T. M., Maruyama, I. & Edmondson, P. D., 2021, In: Transactions of the American Nuclear Society. 124, 1, p. 312-313 2 p.

    Research output: Contribution to journal › Conference article › peer-review

  22. Published

    Mineralische Nebenprodukte und Abfälle 8: - Aschen, Schlacken, Stäube und Baurestmassen -

    Thiel, S. (Co-editor), Thomé-Kozmiensky, E. (Editor), Senk, D. G. (Co-editor), Wotruba, H. (Co-editor), Antrekowitsch, H. (Co-editor) & Pomberger, R. (Co-editor), 2021, Neuruppin. 303 p.

    Research output: Book/Report › Anthology › Research

  23. Published

    MOF-Derived Metal-Carbon Composite Materials as Bifunctional Catalyst for Zn-Air Battery

    Sanli, A., 2021

    Research output: Thesis › Master's Thesis

  24. Published

    Nachhaltige recyclingbezogene Aluminium-Legierungen

    Krall, P., 2021

    Research output: Thesis › Master's Thesis

  25. Published

    NOx-Emissionen beim Recycling von Elektronikschrott

    Schloffer, J., 2021

    Research output: Thesis › Master's Thesis

  26. Published

    Optimierung der Stabilisierung im System Al-Mg-Si nach dem Strangpressen

    Ortner, P., 2021

    Research output: Thesis › Master's Thesis

  27. Published

    Potenzialabschätzung der Laugung von Aktivmaterial aus verbrauchten Lithium-Ionen-Batterien unter der Verwendung von organischen Säuren

    Schinnerl, C., 2021

    Research output: Thesis › Master's Thesis

  28. Published

    Schwingfestigkeitsprüfung von Al-Legierungen bei erhöhten Temperaturen zur Anwendung im Fahrwerksbereich für Motorsport und Hypercars

    Martinelli, M. H., 2021

    Research output: Thesis › Master's Thesis

  29. Published

    Untersuchung des Reduktionsmechanismus von ZnO auf einem Metallbad mit unterschiedlichen Kohlenstoffkonzentrationen

    Wölfler, C., 2021

    Research output: Thesis › Master's Thesis

  30. Published

    Untersuchung des Schmelzverhaltens und der Viskosität von Schlacken der sekundären Ferromanganerzeugung

    Scheiblehner, D., 2021

    Research output: Thesis › Master's Thesis

  31. Published

    Untersuchungen zur Reduzierung eines zinkhaltigen Prozessrückstandes aus einer Batterierecyclinganlage

    Aigner, M., 2021

    Research output: Thesis › Master's Thesis

  32. Published

    Untersuchungen zur selektiven Rückgewinnung von Mangan aus Aktivmaterial von verbrauchten Lithium-Ionen-Batterien

    Freil, J., 2021

    Research output: Thesis › Master's Thesis

  33. Published

    Verhalten aluminiumhaltiger Reststoffe und minderwertiger Aluminiumschrotte beim Recycling unter Berücksichtigung von Sondermetallen

    Wibner, S., 2021

    Research output: Thesis › Doctoral Thesis

  34. Published

    Verhalten von Ni und As im Zuge einer pyrometallurgischen Behandlung eines Jarosit Fällrückstandes zur SO2 Abtrennung

    Fasching, M., 2021

    Research output: Thesis › Master's Thesis

  35. Published

    Voruntersuchungen zum schmelzmetallurgischen Cracken von Methan

    Hochfellner, A. M., 2021

    Research output: Thesis › Master's Thesis

  36. 2020
  37. Published

    Tartaric-sulphuric acid anodized clad AA2024-T3 post-treated in Ce-containing solutions at different temperatures: Corrosion behaviour and Ce ions distribution

    Ramirez, O. M. P., Queiroz, F. M., Tunes, M. A., Antunes, R. A., Rodrigues, C. L., Lanzutti, A., Pogatscher, S., Olivier, M.-G. & Melo, H. G. D., 30 Dec 2020, In: Applied surface science. 534, p. 147634 1 p., 147634.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Selective Laser Melting of a Near-alpha Ti6242S Alloy for High-Performance Automotive Parts

    Fleißner-Rieger, C., Pfeifer, T., Jörg, T., Kremmer, T., Brabetz, M., Clemens, H. & Mayer, S., 17 Dec 2020, In: Advanced engineering materials. 2021, p. 1-12 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    The effect of flux on ion irradiation-enhanced precipitation in AISI-316L: An in-situ TEM study

    Oyarzabal, Í. M., Tunes, M., Camara, O., Aradi, E., Mir, A. H., Greaves, G., Hinks, J. A., Fitchner, P. F. & Donnelly, S. E., 1 Dec 2020, In: Journal of nuclear materials. 541, December, p. 152414 8 p., 152414.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Bestimmung der Schmelzausbeuten von aluminiumhaltigem Pulver in brikettierter Form

    Wibner, S. & Antrekowitsch, H., Dec 2020

    Research output: Book/Report › Commissioned report › Research

  41. Published

    Prototypic Lightweight Alloy Design for Stellar-Radiation Environments

    Tunes, M. A., Stemper, L., Greaves, G., Uggowitzer, P. J. & Pogatscher, S., 18 Nov 2020, In: Advanced science. 7, 22, 2002397.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Degradation of Cu nanowires in a low-reactive plasma environment

    Santa Rosa Coradini, D., Tunes, M. A., Kremmer, T. M., Schön, C. G., Uggowitzer, P. J. & Pogatscher, S., 5 Nov 2020, In: npj Materials degradation. 4, 8 p., 33.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Investigation on the chemical and thermal behavior of recycling agglomerates from EAF by-products

    Willms, T., Echterhof, T., Steinlechner, S., Aula, M., Abdelrahim, A., Fabritius, T., Mombelli, D., Mapelli, C. & Preiss, S., 2 Nov 2020, In: Applied Sciences : open access journal. 10, 22, p. 1-14 14 p., 8309.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Recycling von Al-Schrotten mit hohem Organikanteil

    Wibner, S. & Antrekowitsch, H., Nov 2020, Konferenzband zur 15. Recy & DepoTech-Konferenz. p. 113-118

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Reduktionsversuche von Rotschlamm unter Einstellung bestimmter Schlackenzusammensetzungen

    Wibner, S. & Antrekowitsch, H., Nov 2020

    Research output: Book/Report › Commissioned report › Research

  46. Published

    Schmelzmetallurgische Verarbeitung von Aluminiumkapseln

    Wibner, S. & Antrekowitsch, H., Nov 2020

    Research output: Book/Report › Commissioned report › Research

  47. Published

    Vergleich der chemischen Zusammensetzungen von Bierdosendeckeln

    Wibner, S. & Antrekowitsch, H., Nov 2020

    Research output: Book/Report › Commissioned report › Research

  48. Published

    Selective Precipitation of Metal Oxalates from Lithium Ion Battery Leach Solutions

    Gerold, E., Luidold, S. & Antrekowitsch, H., 29 Oct 2020, In: Metals : open access journal . 10.2020, 11, p. 1-15 15 p., 1435.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Vorstellung eines am Lehrstuhl für Nichteisenmetallurgie entwickelten thermodynamischen Modells des Wälzprozesses

    Brandner, U., Leuchtenmüller, M., Antrekowitsch, J., Pichler, C., Wagner, C., Ruh, A. & Zajac, S., 28 Oct 2020, In: Berg- und hüttenmännische Monatshefte : BHM. 165.2020, 11, p. 592-597 6 p.

    Research output: Contribution to journal › Article › Research

  50. Published

    Radiation damage suppression in AISI-316 steel nanoparticles: Implications for the design of future nuclear materials

    Aradi, E., Tunes, M. A., Lewis-Fell, J., Greaves, G., Antrekowitsch, H., Pogatscher, S., Donnelly, S. E. & Hinks, J. A., 23 Oct 2020, In: ACS Applied Nano Materials. 3, 10, p. 9652-9662 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    COMMBY Jahresbericht

    Brandner, U., 1 Oct 2020

    Research output: Book/Report › Other report › Transfer

  52. E-pub ahead of print

    Corrosion resistance of functionally graded TiN/Ti coatings for proton exchange membrane fuel cells

    Silva, F. C., Prada Ramirez, O. M., Tunes, M., Edmondson, P. D., Sagás, J. C., Fontana, L. C., de Melo, H. G. & Schön, C. G., 1 Oct 2020, (E-pub ahead of print) In: International Journal of Hydrogen Energy . 45.2020, 58, p. 33993-34010 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 12 3 4 5 6 7 8 9 ...48 Next
View graph of relations

Contact information

Erzherzog-Johann-Straße 3/II, 8700 Leoben
  • Main phone number: +43 3842 402 5201 oder 5204