Chair of Metal Forming (560)

Organisational unit: Chair

401 - 450 out of 731Page size: 50

Research output

  1. 2009
  2. Published

    Grain growth in dependence of different annealing times and temperatures in austenitic stainless steel (Böhler A607) 304L

    Winter, G., 2009, 125 p.

    Research output: Thesis › Master's Thesis

  3. Published

    Herstellung von Stahl-Aluminium-Werkstoffverbunden durch Walzplattieren

    Lehofer, H. & Buchmayr, B., 2009, 4. Landshuter Leichtbau-Colloquium (26.-27.2.2009, Hochschule Landshut). LC-Verl., p. 187-193

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Improving mechanical properties of an aluminium alloy with chills

    Pabel, T. & Schindelbacher, G., 2009, In: Casting plant and technology international. 24, 3, p. 16-23

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Improving the dynamic and stability behavior of plates by laser treatment

    Bilik, C., Rammerstorfer, F. G., Daxner, T., Figala, G. & Buchmayr, B., 2009, 6th ICCSM Int. Congress of Croatian Society of Mechanics Dubrovinik.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Investigation of a Cogging Process for Surface Densification of PM Gears by FEM Simulation

    Planitzer, F., Hatzenbichler, T. & Buchmayr, B., 2009,

    Proceedings of the MPIF/APMI International Conference on Powder Metallurgy & Particulate Materials

    .     p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Investigation of the material flow of a warm formed profile

    Harrer, O.-K., Wallner, S. & Buchmayr, B., 2009,

    Hot forming of Steels & Product Properties

    .     p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Kaltumformen mittels Rundkneten

    Wallner, S., Hofer, F., Koppensteiner, R., Wieser, R. & Harrer, O.-K., 2009, Kaltumformen mittels Rundkneten. Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 113-118

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Kaltumformung - eine systemanalytische Betrachtung

    Buchmayr, B., 2009, Kaltumformung - eine systemanalytische Betrachtung. Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 5-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Microstructural aspects and recrystallization behaviour of the direkt rolling of steel using laborytory simulation

    Gelder, S. & Buchmayr, B., 2009,

    Hot forming of Steels & Product Properties

    .     p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Modellierung und Simulation des Schrägwalzens von Rundknüppeln zu Rohrluppen unter Berücksichtigung der Mikrostrukturentwicklung und der Umformbarkeit von Primärstrukturen

    Pschera, R., 2009

    Research output: Thesis › Doctoral Thesis

  12. Published

    Modelling of microstructure evolution in hot work tool steels during service

    Krumphals, F., Wlanis, T., Sommitsch, C., Holzer, I., Sonderegger, B. & Wieser, V., 2009, In: Computer methods in materials science. 9, p. 228-233

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Modelling the Critical Conditions for the Rolling of Seamless Pipes

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2009, TMS 2009 Proceedings - Materials Processing and Manufacturing Division.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Modelling the Forming Limit during Cross-Rolling of Seamless Pipes using a Modified Continuum Damage Mechanics Approach

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2009, 3rd International Conference Simuation and Modelling of Metallurgical Processes in Steelmaking. p. 201-209

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Neue Wege in der Computertomographie und in der Bauteilprüfung

    Geier, G., Brunke, O., Pabel, T., Rosc, J. & Habe, D., 2009, In: ZfP-Zeitung. 10, p. 22-25

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Optische Messungen zur Ermittlung der Eigenspannungen an Kaltbändern

    Forstner, K. & Buchmayr, B., 2009, Optische Messungen zur Ermittlung der Eigenspannungen an Kaltbändern. Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 119-124

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Physikalisch basierte Modellierung der Gefügeentwicklung während des Warmwalzens von Aluminiumlegierungen

    Sherstnev, P., 2009

    Research output: Thesis › Doctoral Thesis

  18. Published

    Physikalische Simulation der Gefügeentwicklung im Zuge des Direkteinsatzes

    Gelder, S., Buchmayr, B., Stöckl, C., Linzer, B. & Hohenbichler, G., 2009, Physikalische Simulation der Gefügeentwicklung im Zuge des Direkteinsatzes. p. 91-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Projektbericht 05 (Jänner) zum Projekt A3.5

    Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Projektbericht 05 (Juli) zum Projekt A3.5

    Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    Projektstatus April 2009 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  22. Published

    Projektstatus Jänner 2009 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Projektstatus Juni 2009 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Projektstatus November 2009 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    Projektstatus Oktober 2009 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    Projektstatus September 2009 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    Radialschmieden im Einstechverfahren

    Wallner, S., Harrer, O.-K. & Buchmayr, B., 2009, Radialschmieden im Einstechverfahren. p. 19-28

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Recrystallization and grain growth in the nickel-based superalloy Allvac 718Plus / Dedicated to Professor Dr. Franz Jeglitsch on the occasion of his 75th birthday

    Sommitsch, C., Huber, D., Ingelman-Sundberg, F., Mitsche, S., Stockinger, M. & Buchmayr, B., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 1088-1098

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Reduction of Porosity in PM Components by Metal Forming Technologies

    Hatzenbichler, T., Buchmayr, B. & Planitzer, F., 2009, COMET MPPE Workshop Damage, Materials Center Leoben. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Simulation des Kopfstauchens unter Berücksichtigung des Vorzuges

    Hatzenbichler, T. & Buchmayr, B., 2009, Simulation des Kopfstauchens unter Berücksichtigung des Vorzuges. Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 73-79

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Steigerung der mechanischen Eigenschaften einer Al-Legierung durch Kühlkokillen

    Pabel, T. & Schindelbacher, G., 2009, In: Giesserei. p. 32-38

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Thermomechanische Behandlung beim Walzen von nahtlosen Stahlrohren

    Klarner, J.K.-H., 2009, 172 p.

    Research output: Thesis › Doctoral Thesis

  33. Published

    Umformtechnischer Leichtbau

    Buchmayr, B., 2009, Leichtbau Prinzipien, Werkstoffauswahl und Fertigungsvarianten. p. 214-246

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  34. Published

    Untersuchung des meta-dynamischen Rekristallisationsverhaltens der Nickelbasislegierung Allvac 718PlusTM und Optimierung der numerischen Gefügesimulation in Deform 2DTM

    Huber, D., 2009

    Research output: Thesis › Diploma Thesis

  35. Published

    Untersuchungen verschiedener Technologien zur Herstellung von Werkstoffverbunden aus Eisenbasislegierungen

    Schramhauser, S., 2009

    Research output: Thesis › Master's Thesis

  36. Published

    Verbesserung der mechanischen Eigenschaften von Al-Legierungen durch den Nachfolgeprozess HIPen

    Pabel, T. & Schindelbacher, G., 2009, In: Giesserei-Praxis. p. 67-70

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Verbesserung der mechanischen Eigenschaften von Al-Legierungen durch den Nachfolgeprozess HIPen

    Pabel, T. & Schindelbacher, G., 2009, In: Gießerei-Rundschau. p. 126-128

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Werkstoffe für die Energietechnik - Anforderungen, Anwendungen und Entwicklungspotenziale

    Buchmayr, B., 2009, In: Berg- und hüttenmännische Monatshefte : BHM. 5, p. 181-188

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    XXVIII. Verformungskundliches Kolloquium

    Buchmayr, B. (Editor) & Harrer, O.-K. (Editor), 2009, Leoben, Österreich: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  40. Published

    Zwischenbericht Juni 2009 "Walzplattieren" zum Projekt P056-01-20

    Lehofer, H., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    Zwischenbericht März 2009 "Walzplattieren" zum Projekt P056-01-20

    Lehofer, H., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Zwischenbericht September 2009 "Walzplattieren" zum Projekt P056-01-20

    Lehofer, H., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. 2008
  44. Published

    Automatic feature extraction from micrographs of forged superalloys

    Berhuber, E., Rinnhofer, A., Stockinger, M., Benesova, W. & Jakob, G., Jul 2008, In: JOM. 60, 7, p. 49-53 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Characterization of δ-phase in superalloy Allvac 718Plus™

    Stotter, C., Sommitsch, C., Wagner, J., Leitner, H., Letofsky-Papst, I., Zickler, G. A., Prantl, W. & Stockinger, M., Apr 2008, In: Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques. 99, 4, p. 376-380 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Alternative Verfahren zum Nachverdichten von Zahnrädern aus P/M - Werkstoffen

    Planitzer, F., 2008

    Research output: Thesis › Diploma Thesis

  47. Published

    Ausscheidungskinetik während der Homogenisierung und Gefügeentwicklung während der Warmumformung der Aluminiumlegierung AA6082

    Sherstnev, P., Sommitsch, C., Mitsche, S., Hacksteiner, M. & Ebner, T., 2008, XXVII. Verformungskundliches Kolloquium. p. 123-130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Bestimmung der Einflussfaktoren auf die Haftfestigkeit von Aluminium-Stahl-Verbundblechen

    Buchner, M., 2008, 134 p.

    Research output: Thesis › Doctoral Thesis

  49. Published

    Characterisation of different lubricants concerning the friciton coefficient in forging of AA2618

    Buchner, B., Maderthoner, G. & Buchmayr, B., 2008, In: Journal of materials processing technology. 198, p. 41-47

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Characterisation of the subgrain structure of the aluminium alloy AA6082 after homogenization and hot forming by EBSD

    Mitsche, S., Sherstnev, P., Sommitsch, C., Ebner, T. & Hacksteiner, M., 2008, Characterisation of the subgrain structure of the aluminium alloy AA6082 after homogenization and hot forming by EBSD. p. 579-580

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Charakterisierung der Luftfahrtlegierung AA7050 zur Optimierung des industriellen Warmwalzens

    Weber, A. M., 2008

    Research output: Thesis › Master's Thesis

  52. Published

    Comparison of experimental and Finite Element Modelling of the extrusion of AA6082 on both tools and extrudate as a function of process parameters

    Krumphals, F., Flitta, I., Mitsche, S., Wlanis, T., Jahn, A. & Sommitsch, C., 2008, ESAFORM 2008. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...5 6 7 8 9 10 11 12 ...15 Next
View graph of relations

Contact information

Franz-Josef Straße 18, 8700 Leoben