Chair of Metal Forming (560)

Organisational unit: Chair

351 - 400 out of 731Page size: 50

Research output

  1. 2010
  2. Published

    Grain structure design of hot formed and annealed multi phase alloys

    Candic, M., 2010, 107 p.

    Research output: Thesis › Doctoral Thesis

  3. Published

    Improvement of buckling resistance of thin sheets by local laser treatment

    Figala, G. & Buchmayr, B., 2010, In: International journal of material forming. 3, p. 829-832

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Improvement of buckling resistance of thin sheets by local laser treatment

    Figala, G. & Buchmayr, B., 2010, 13th International ESAFORM Conference on Material Forming. AIP Press

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Interaction of the precipitation kinetics of δ and γ' phases in nickel-base superalloy ATI Allvac® 718Plus™

    Radis, R., Zickler, G. A., Stockinger, M., Sommitsch, C. & Kozeschnik, E., 2010, THERMEC 2009. Chandra, T., Chandra, T., Chandra, T., Wanderka, N., Wanderka, N., Wanderka, N., Reimers, W., Reimers, W., Reimers, W., Ionescu, M., Ionescu, M. & Ionescu, M. (eds.). Trans Tech Publications, p. 2712-2717 6 p. (Materials Science Forum; vol. 638-642).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Investigations of the stability and dynamic behaviour of plates subjected to laser treatment

    Figala, G., 2010, Junior Scientist Conference 2010. p. 71-72

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Laser-Sealed Fülldraht-Fertigungstechnologie

    Posch, G., Fiedler, M., Bauer, P., Michael, B., Böck, B., Schnitzer, R., Strauss, C. & Moitzi, G., 2010, Join-Ex: Internationaler Fachkongress der Schweiß und Verbindungstechnik. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Lokale fertigungstechnische Verstärkungskonzepte zur Erhöhung der Materialeffizienz

    Buchmayr, B., Figala, G. & Wunsch, L., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. 155, p. 307-312

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Manufacturing of precision forgings by radial forging

    Wallner, S., Harrer, O.-K. & Buchmayr, B., 2010, AMPT 2010 "Advances in Materials and Processing Technologies". p. 315-320

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Material flow of a warm formed profile considering the pre-treatment of the material

    Harrer, O.-K., Buchmayr, B. & Wallner, S., 2010, In: International journal of material forming. p. 327-330

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Metadynamic recrystallization of the nickel-based superalloy Allvac 718Plus™

    Sommitsch, C., Huber, D. & Stockinger, M., 2010, THERMEC 2009. Chandra, T., Chandra, T., Chandra, T., Wanderka, N., Wanderka, N., Wanderka, N., Reimers, W., Reimers, W., Reimers, W., Ionescu, M., Ionescu, M. & Ionescu, M. (eds.). Trans Tech Publications, p. 2327-2332 6 p. (Materials Science Forum; vol. 638-642).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Methode für die Bewertung von Porositätsanalysen von CT Daten“

    Rosc, J., Geier, G., Habe, D. & Pabel, T., 2010, Industrielle CT Fachtagung-Proceedings. p. 85-91

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Modelling the Forming Limit during Cross-Rolling of Seamless Pipes Using a Modified Continuum Damage Mechanics Approach

    Pschera, R., Sommitsch, C. & Klarner, J., 2010, In: Steel research international.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Neue Konzepte zum Kalibrieren von Sinterbauteilen

    Schiller, W., 2010

    Research output: Thesis › Diploma Thesis

  15. Published

    Neue Wege in der Computertomographie und der Bauteilprüfung

    Geier, G., Pabel, T., Rosc, J., Habe, D. & Brunke, O., 2010, In: Druckguss-Praxis. p. 1-4

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    New developments in the field of continuous production of corrugated metal hoses

    Weiss, S., Hatzenbichler, T. & Buchmayr, B., 2010, In: Tube & pipe technology. 23, 4, p. 106-110

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Numerical simulation of the simultaneous precipitation of δ and γ′ phases in the Ni-base superalloy ATI Allvac®718 Plus™

    Radis, R., Zickler, G. A., Stockinger, M., Sommitsch, C. & Kozeschnik, E., 2010, 7th International Symposium on Superalloy 718 and Derivatives 2010. p. 569-578 10 p. (7th International Symposium on Superalloy 718 and Derivatives 2010; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Optimierung der Wärmebehandlungsparameter der Legierung EN AC-Al Si7Mg0.x

    Dambauer, G. & Pabel, T., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    Projektbericht 09 (August) zum Projekt A3.5

    Planitzer, F., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Projektbericht 10 (Juni) zum Projekt A3.5

    Planitzer, F., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    Projektstand September 2010 zum Projekt A3.5

    Planitzer, F., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  22. Published

    Projektstatus Juni 2010 zum Projekt A3.5

    Planitzer, F., Hatzenbichler, T., Planitzer, C. & Schiller, W., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Projektstatus September 2010 zum Projekt A3.5

    Hatzenbichler, T., Planitzer, F., Planitzer, C. & Schiller, W., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Simulation des Walzens von Rippenplatten UIC60-0

    Harrer, O.-K., Buchmayr, B. & Riedl, A., 2010, MEFORM 2010 80 Jahre Walzwerks- und Werkstofftechnologie in Freiberg. p. 226-237

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Simulation des Zentrierlochens von Blöcken

    Hatzenbichler, T., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    Simulation of cold forging under consideration of residual stresses induced by preceding drawing

    Hatzenbichler, T., Buchmayr, B. & Walzl, A., 2010, AMPT 2010 "Advances in Materials and Processing Technologies". p. 321-326

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Simulation of rolling of check rail support plates

    Harrer, O.-K., Riedl, A. & Buchmayr, B., 2010, In: Steel grips : journal of steel and related materials. 8, p. 34-37

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Untersuchungen zum Verbundgießen von warmfesten Legierungen

    Weligoschek, T., 2010, 128 p.

    Research output: Thesis › Master's Thesis

  29. Published

    Untersuchungen zum Verbundgießen warmfester Legierungen

    Buchmayr, B. & Weligoschek, T., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. 155, p. 318-324

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Werkstoffkundliche und verfahrenstechnische Einflüsse bei der Herstellung von Aluminium-Aerosolspraydosen

    Taschauer, M., 2010, 110 p.

    Research output: Thesis › Diploma Thesis

  31. Published

    Werkstoffkundliche und Verfahrenstechnische Einflüsse bei der Herstellung von Aluminium-Aerosolspraydosen.

    Taschauer, M., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    XXIX. Verformungskundliches Kolloquium

    Buchmayr, B. (Editor) & Harrer, O.-K. (Editor), 2010, Leoben, Österreich: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  33. Published

    Zwischenbericht März 2010 "Walzplattieren" zum Projekt P056-01-20

    Lehofer, H., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. 2009
  35. Published

    Aktuelle Entwicklungen am Lehrstuhl für Umformtechnik

    Buchmayr, B., 2009, Aktuelle Entwicklungen am Lehrstuhl für Umformtechnik. p. 187-193

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Ansätze für die Bewertung der Formänderungsverhältnisse beim Schrägwalzen

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2009, XXVIII. Verformungskundliche Kolloquium, 28.02-03.03.2009, Planneralm/Donnersbach. p. 215-228

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Anwendung der thermomechanischen Behandlung beim Walzen von nahtlosen Stahlrohren

    Klarner, J.K.-H. & Buchmayr, B., 2009, Anwendung der thermomechanischen Behandlung beim Walzen von nahtlosen Stahlrohren. p. 191-204

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Ausscheidungskinetik von Karbiden in einem Warmarbeitsstahl

    Zauner, J., 2009

    Research output: Thesis › Master's Thesis

  39. Published

    Charakterisierung eines Radialschmiedeprozesses zum Oberflächenverdichten von P/M Zahnrädern mittels FEM

    Planitzer, F., Hatzenbichler, T. & Buchmayr, B., 2009, Charakterisierung eines Radialschmiedeprozesses zum Oberflächenverdichten von P/M Zahnrädern mittels FEM. p. 9-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Computertomographie: Möglichkeiten, Erwartungen und Grenzen in der Praxis

    Geier, G., Pabel, T. & Schindelbacher, G., 2009, In: Giesserei-Praxis. p. 108-112

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Determination of the real contact area for numerical simulation

    Buchner, B., Buchner, M. & Buchmayr, B., 2009, In: Tribology International. 42, p. 897-901

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Development and Validation of a Finite-Element Model for Radial Forging

    Wallner, S., Harrer, O.-K., Hatzenbichler, T. & Buchmayr, B., 2009, X International Conference on Computational Plasticity (Complas), Barcelona/Spain, (Tagungsband auf CD). p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Effect of different contact formulations used in commercial FEM-Software Packages on the results of hot forging simulations

    Hatzenbichler, T., Harrer, O.-K., Buchmayr, B. & Planitzer, F., 2009,

    Hot forming of Steels & Product Properties

    .     p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Einflüsse auf die Umformbarkeit von Aerosolspraydosen

    Taschauer, M. & Buchmayr, B., 2009, Einflüsse auf die Umformbarkeit von Aerosolspraydosen. Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 125-130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Einsatz von INOTEC®-Kernen für deutlich verbesserte mechanische Eigenschaften von Al-Gussteilen

    Pabel, T., Kneißl, C., Brotzki, J. & Müller, J., 2009, In: Giesserei-Praxis. p. 359-366

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    FEM - Simulation of Long Term Die Heating during High - Frequency Incremental Hot Forging Processes

    Hatzenbichler, T., Wallner, S., Buchmayr, B., Prevedel, P. & Caliskanoglu, D., 2009,

    Material Science & Technology (MS&T 2009)

    .     p. 2247-2257

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    FEM study on the penetration of projectiles into steel sheets

    Hatzenbichler, T. & Buchmayr, B., 2009, In: International journal of material forming. Vol.2, p. 789-792

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    FEM Study on the Penetration of Projectiles into steel sheets

    Hatzenbichler, T. & Buchmayr, B., 2009, FEM Study on the Penetration of Projectiles into steel sheets. AIP Press, p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    FEM-Supported Development of a Radial Forging Process for Surface Densification of P/M Gears

    Planitzer, F., Hatzenbichler, T. & Buchmayr, B., 2009, FEM-Supported Development of a Radial Forging Process for Surface Densification of P/M Gears. AIP Press, p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    FEM-Supported Development of a Radial Forging Process for Surface Densification of P/M Gears

    Planitzer, F., Hatzenbichler, T. & Buchmayr, B., 2009, In: International journal of material forming. 2, p. 93-96

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Fließkurvenermittlung im Torsionsversuch

    Strobich, S., 2009

    Research output: Thesis › Master's Thesis

  52. Published

    Form vollendet

    Buchmayr, B., 2009, In: Kleine Zeitung / Steiermark - Leoben und rund um den Erzberg. p. 23-23

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...4 5 6 7 8 9 10 11 ...15 Next
View graph of relations

Contact information

Franz-Josef Straße 18, 8700 Leoben