Chair of Metal Forming (560)

Organisational unit: Chair

501 - 600 out of 731Page size: 100

Research output

  1. 2008
  2. Published

    Vorformoptimierung für das Gesenkschmieden mittels numerischer Simulation

    Hatzenbichler, T. & Buchmayr, B., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 413-417

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Werkstoff- und verfahrenstechnische Optimierung bei der Herstellung hochfester Schrauben

    Buchmayr, B., Hatzenbichler, T., Kienreich, R. & Beyer, S., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 423-429

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Wirkung von Kühleisen im Sandguss auf Gefüge und mechanische Eigenschaften der Legierung EN AC-Al Si7Mg

    Pabel, T. & Schindelbacher, G., 2008, In: Gießerei-Rundschau. p. 153-157

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    XXVII. Verformungskundlichen Kolloquium

    Buchmayr, B. (Editor) & Harrer, O.-K. (Editor), 2008, Leoben, Österreich: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  6. Published

    Zwischenbericht Dezember 2008 "Walzplattieren" zum Projekt P056-01-20

    Lehofer, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  7. Published

    Zwischenbericht "Endlos Giess-Walzanlagen für Langprodukte" zum Projekt P056-01-09 (1.7-31.12.2007)

    Gelder, S., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  8. Published

    Zwischenbericht Februar 2008 "Walzplattieren" zum Projekt P056-01-20

    Lehofer, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  9. Published

    Zwischenbericht Juni 2008 "Walzplattieren" zum Projekt P056-01-20

    Lehofer, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  10. Published

    Zwischenbericht September 2008 "Walzplattieren" zum Projekt P056-01-20

    Lehofer, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    δ-phase characterization of superalloy Allvac 718 Plus™

    Sommitsch, C., Stotter, C., Leitner, H., Mitsche, S., Letofsky-Papst, I. & Stockinger, M., 2008, TMS2008 - 137th Annual Meeting and Exhibition Supplemental Proceedings: Materials Processing and Properties. p. 63-68 6 p. (TMS Annual Meeting; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Воздействие комбинации холодного с теплым термическим упрочнением на качество литейного сплава AlSi9Cu3(Fe)(Zn) (Auswirkungen einer Kombination von Kalt- mit Warmauslagerung auf die mechanischen Eigenschaften der Druckgusslegierung AlSi9Cu3(Fe)(Zn))

    Pabel, T., Geier, G., Rockenschaub, H. & Hopfinger, M., 2008, In: Giesserei-Praxis. p. 36-44

    Research output: Contribution to journal › Article › Research › peer-review

  13. 2007
  14. Published

    Mechanische Eigenschaften der Druckgusslegierung AlSi9Cu3(Fe) - eine Übersicht über die Aushärtemechanismen und die Steigerung der Eigenschaften mittels gezielter Warmauslagerung

    Rockenschaub, H., Pabel, T., Geier, G., Holzer, H. & Hopfinger, M., 5 Jun 2007

    Research output: Non-textual form › Web publication/site › Research

  15. Published

    Front end bending in plate rolling influenced by circumferential speed mismatch and geometry

    Philipp, M., Schwenzfeier, W., Fischer, F.-D., Wödlinger, R. & Fischer, C., 11 Jan 2007, In: Journal of materials processing technology. 184.2017, 1-3, p. 224-232 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Analyse von Herstellmöglichkeiten für hochfeste Nahtlosrohre

    Lackner, B. K., 2007

    Research output: Thesis › Diploma Thesis

  17. Published

    A numerical sensitivity study to determine the main influence parameters on the back-end defect

    Buchmayr, B., Hatzenbichler, T. & Umgeher, A., 2007, In: Journal of materials processing technology. 182, p. 73-78

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    A Practical Approach to Preform Design for Different Materials

    Harrer, O.-K., Sommitsch, C., Rüf, G. & Buchmayr, B., 2007, ESAFORM Conference on Material Forming. AIP Press, p. 15-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Auswirkungen einer Kombination von Kalt- mit Warmauslagerung auf die mechanischen Eigenschaften der Druckgusslegierung Al Si9Cu3(Fe)(Zn)

    Pabel, T., Rockenschaub, H., Geier, G. F. & Hopfinger, M., 2007, In: Druckguss-Praxis. p. 33-41

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Charakterisierung unterschiedlicher Schmierstoffe hinsichtlich des Reibzahlverlaufes beim Schmieden von Aluminiumlegierungen

    Buchner, B., Maderthoner, G. & Buchmayr, B., 2007, XXVI. Verformungskundliches Kolloquium. p. 255-265

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Combined EBSD, FIB and TEM investigation of the crack behaviour of the nickel based alloy 80A

    Mitsche, S., Pölt, P., Sommitsch, C. & Albu, M., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  22. Published

    Computertomographie bei Holz

    Pabel, T., Golser, M. & Neumueller, A., 2007, In: Holzforschung Austria. p. 8-9

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Computertomographie – Möglichkeiten, Erwartungen und Grenzen in der Praxis

    Geier, G., Pabel, T. & Schindelbacher, G., 2007, In: Giesserei. p. 34-41

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Computertomographie – Möglichkeiten, Erwartungen und Grenzen in der Praxis

    Geier, G., Pabel, T. & Schindelbacher, G., 2007, In: Gießerei-Rundschau. p. 82-86

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Coupled Physical and Numerical Simulation to Optimize Thermo-mechanical Metal Forming Processes

    Sommitsch, C. & Buchmayr, B., 2007, In: Steel research international. 78, p. 740-744

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Crack behaviour of the Nickel based alloy 80A during hot forming

    Mitsche, S., Pölt, P., Sommitsch, C. & Albu, M., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    Creep-fatigue of multi-part container during hot extrusion of copper – Simulation and experimental comparison

    Krumphals, F., Wlanis, T., Sommitsch, C. & Redl, C., 2007, In: Computer methods in materials science. 7, p. 47-53

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Description of a test-methodology for the formulation and selection of components of thread-molding oils

    Monetti, C., Novotny-Farkas, F., Hering, G., Buchner, B., Schiester, I. & Tonnerer, F., 2007, ECOTRIB 2007. Slovenian Scociety of tribology, p. 15-23

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Development of aluminium-clad steel sheet by roll-bonding for the automotive industry

    Buchner, M., Buchmayr, B., Bichler, C. & Riemelmoser, F., 2007, 10th International ESAFORM Conference on Material Forming. p. 264-268

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Einfluss reduzierter Schmiedetemperaturen auf die Eigenschaften von AFP-Stählen

    Buchmayr, B. & Lehofer, H., 2007, Workshop "Moderne thermomechanische Prozessstrategien in der Stahlumformung". p. 53-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Einfluss von Schmiede- und Abkühlbedingungen auf das Gefüge und die Eigenschaften ausgewählter AFP-Stähle

    Lehofer, H., 2007

    Research output: Thesis › Master's Thesis

  32. Published

    Entwicklung der Gefügestruktur und Beurteilung der effektiven Dehnung bei der Warmumformung

    Candic, M., Tian, B., Kelber, S. & Sommitsch, C., 2007, XXVI. Verformungskundliches Kolloquium. p. 151-157

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Erster und zweiter Projektbericht Jänner 2007 Diplomarbeit Florian Planitzer zum Projekt: NK021-05

    Hatzenbichler, T. & Planitzer, F., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Estimation of friction under forging conditions by means of the ring-on-disc test

    Buchner, B., Umgeher, A. & Buchmayr, B., 2007, 10th ESAFORM Conference on Material Forming. AIP Press, p. 505-508

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Experimentelle Validierung von FEM-Rechnungen zur Spannungs- und Temperaturanalyse von Werkzeugen beim Kupfer-Strangpressen

    Krumphals, F., Wlanis, T., Planitzer, F. & Sommitsch, C., 2007, Experimentelle Validierung von FEM-Rechnungen zur Spannungs- und Temperaturanalyse von Werkzeugen beim Kupfer-Strangpressen. p. 65-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    FE-Modelling of the Cross-Rolling-Piercing Process with Discher Discs

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2007, 2nd International Conference Simuation and Modelling of Metallurgical Processes in Steelmaking. p. 313-317

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Finite-Elemente-Analyse der Reibungsbedingungen beim Schrägwalzen mit Diescherscheiben

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2007, Seminar "Rohrherstellung und -verarbeitung. p. 59-69

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Finite-Elemente-Modellierung des Schrägwalzens

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2007, In: Berg- und hüttenmännische Monatshefte : BHM. 152, p. 205-211

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Finite Elemente Simulation des Kalibrierprozesses für pulvermetallurgisch hergestellte Bauteile

    Wallner, S., 2007, 107 p.

    Research output: Thesis › Master's Thesis

  40. Published

    Flow Behaviour and Microstructure during Hot Deformation of Ti-5Al-5Mo-5V-3Cr-1Zr

    Warchomicka, F., Stockinger, M. & Degischer, H. P., 2007, Ti-2007 - Proceedings of the 11th World Conference on Titanium. Niinomi, M., Akiyama, S., Ikeda, M., Hagiwara, M. & Maruyama, K. (eds.). p. 511-514 4 p. (Ti-2007 - Proceedings of the 11th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Forschungsbericht Nr. 1 zum Projekt NK021-05

    Hatzenbichler, T. & Köppl, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Forschungsbericht Nr. 2 zum Projekt NK021-05

    Hatzenbichler, T., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Gekoppelte physikalische und numerische Simulation zur Optimierung von thermo-mechanischen Umformprozessen

    Sommitsch, C. & Buchmayr, B., 2007, Workshop "Moderne thermomechanische Prozessstrategien in der Stahlumformung" (Stahlzentrum VDEh), Düsseldorf. p. 89-99

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Heat Transfer during press hardening

    Forstner, K., Buchmayr, B. & Strobich, S., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  45. Published

    Herstellung von walzplattierten Aluminium-Stahl-Werkstoffen für die Automobilindustrie

    Buchner, M., Buchmayr, B., Bichler, C. & Riemelmoser, F., 2007, XXVI. Verformungskundliches Kolloquium. p. 199-207

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Hot forming and heat treatment simulation in a steel mill

    Redl, C., Tian, B., Wieser, V., Sommitsch, C. & Wlanis, T., 2007, In: Computer methods in materials science. 7, p. 47-53

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Improved mechanical properties of the die casting alloy AlSi9Cu3(Fe)(Zn) as a result of the combination of natural and artificial ageing

    Pabel, T., Geier, G., Rockenschaub, H. & Hopfinger, M., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 516-520

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Innovative Beiträge der Umformtechnik zum Leichtbau von Kraftfahrzeugen

    Buchmayr, B., 2007, In: Berg- und hüttenmännische Monatshefte : BHM. 152. Jg., p. 136-141

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Interaction of Recrystallization and Precipitation during Hot Forming of Alloy 80 A

    Sommitsch, C., Pölt, P., Rüf, G., Mitsche, S. & Albu, M., 2007, In: Materials Science Forum . p. 2988-2993

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Investigation of Retained Strains during Multipass Deformation

    Candic, M., Tian, B., Kleber, S., Wiesner, M. & Sommitsch, C., 2007, In: Materials Science Forum . 558-559, p. 485-490

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Local Deformation of Ti Alloys and Ti Matrix Composites

    Poletti, C., Warchomicka, F., Kremmer, S., Stockinger, M. & Degischer, H. P., 2007, Ti-2007 - Proceedings of the 11th World Conference on Titanium. Niinomi, M., Akiyama, S., Ikeda, M., Hagiwara, M. & Maruyama, K. (eds.). p. 595-598 4 p. (Ti-2007 - Proceedings of the 11th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Modellierung der Schädigung während der Warmumformung

    Rüf, G., 2007, 232 p.

    Research output: Thesis › Doctoral Thesis

  53. Published

    Modelling of creep fatigue in containers during aluminium and copper extrusion

    Sommitsch, C., Sievert, R., Wlanis, T., Günther, B. & Wieser, V., 2007, In: Computational materials science. 39, p. 55-64

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Oils for Internal Thread Molding Description of a Test-Methodology

    Monetti, C., Buchner, B., Schiester, I., Tonnerer, F. & Hering, G., 2007, XXVI. Verformungskundliches Kolloquium. p. 243-254

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    ON MODELLING THE LOCAL DAMAGE EVOLUTION IN HOT WORK TOOL STEELS

    Krumphals, F., 2007

    Research output: Thesis › Diploma Thesis

  56. Published

    On the interaction of ductile damage and materials softening of a Ni-base alloy during hot deformation

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 1146-1155

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    On the retained strain during multipass hot deformation for the austenitic stainless steel 304 L

    Candic, M., Tian, B., Kleber, S., Wießner, M. & Sommitsch, C., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  58. Published

    Optical Surface Analysis of Steel during Hot Compression: A Test to Determine Crack Initiation

    Pschera, R., Winter, G. & Sommitsch, C., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  59. Published

    Preform Optimization in Die Forging with Standardized Design Feature

    Zhuang, Y., 2007

    Research output: Thesis › Diploma Thesis

  60. Published

    Projektendbericht Dezember 2007 zum Projekt NK021-05

    Hatzenbichler, T. & Planitzer, F., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  61. Published

    Projektendpräsentation September 2007 zum Projekt NK021-05

    Planitzer, F., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  62. Published

    Projektpräsentation Oktober 2007 zum Projekt NK021-05

    Hatzenbichler, T. & Planitzer, F., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  63. Published

    Projektstatus April 2007 zum Projekt NK021-05

    Hatzenbichler, T., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  64. Published

    Projektstatus Dezember 2007 zum Projekt NK021-05

    Hatzenbichler, T. & Planitzer, F., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  65. Published

    Projektstatus Februar 2007 zum Projekt NK021-05

    Hatzenbichler, T., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  66. Published

    Projektstatus Jänner 2007 zum Projekt NK021-05

    Hatzenbichler, T., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  67. Published

    Projektstatus Juli 2007 zum Projekt NK021-05

    Hatzenbichler, T., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  68. Published

    Projektstatus Mai 2007 Diplomarbeit Wallner Stefan zum Projekt: P056-01-14

    Wallner, S., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  69. Published

    Projektstatus März 2007 Diplomarbeit Wallner Stefan zum Projekt: P056-01-14

    Wallner, S., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  70. Published

    Recrystallization behaviour of the nickel-based alloy 80 A during hot forming

    Mitsche, S., Poelt, P. & Sommitsch, C., 2007, In: Journal of microscopy. 227, p. 267-274

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Scheil-Gulliver simulation with partial redistribution of fast diffusers and simultaneous solid-solid phase transformations

    Buchmayr, B., Kozeschnik, E. & Rindler, W., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 98, p. 826-831

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Schmelzen von Magnesium - Optimierung der Strömungsverhältnisse in einem Magnesiumofen

    Rockenschaub, H., Pabel, T., Sigmund, A., Wohlmuth, P. & Schumacher, P., 2007

    Research output: Non-textual form › Web publication/site › Research

  73. Published

    Simulation der Umformung und Schädigung bei Massivumformung

    Buchmayr, B., 2007, 6. Industriekolloquium "Hochfeste Strukturen" an der TU Clausthal/Zellerfeld. p. 125-132

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Starke Präsentationen rund um das Thema Schmelze und Schmelzen - Rückblick GIFA 2007

    Geier, G. & Pabel, T., 2007, In: Giesserei-Praxis. p. 381-395

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Umformtechnische Lösungen für den Bau leichter Karosserien

    Buchmayr, B., 2007, XXVI. Verformungskundliches Kolloquium. p. 189-198

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Verbesserte Leistungsfähigkeit von walzplattierten Aluminium-Stahl-Werkstoffen

    Buchner, M., Buchmayr, B., Bichler, C. & Riemelmoser, F., 2007, Neue Wege zum wirtschaftlichen Leichtbau. p. 267-281

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    X-Ray computed tomography – Potenials, expectations and limits in practical application

    Schindelbacher, G., Pabel, T. & Geier, G., 2007, In: Casting plant and technology international. p. 34-41

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    XXVI. Verformungskundlichen Kolloquium

    Buchmayr, B. (Editor) & Harrer, O.-K. (Editor), 2007, Leoben, Österreich: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  79. 2006
  80. Published

    Quantitative analysis of the microstructure of near β titanium alloy during compression tests

    Warchomicka, F., Stockinger, M. & Degischer, H. P., 3 Jul 2006, In: Journal of materials processing technology. 177, 1-3, p. 473-477 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Aluminium- und Zinkdruckguss für höchste Ansprüche

    Pabel, T. & Rockenschaub, H., 2006, In: Druckguss-Praxis. p. 109-111

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Bestimmung der Haftfestigkeit von Aluminium-Stahl-Verbunden

    Buchner, M., Buchmayr, B. & Bichler, C., 2006, XXV. Verformungskundliches Kolloquium. p. 205-213

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Bestimmung der Reibzahl unter Schmiedebedingungen mithilfe des Rotationsreibversuches

    Buchner, B., Markut, K. & Buchmayr, B., 2006, XXV. Verformungskundliches Kolloquium. p. 101-117

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Bestimmung von Materialparametern für poröse Werkstoffe

    Hatzenbichler, T., Planitzer, F., Buchmayr, B., Köppl, R. & Ecker, W., 2006, XXV. Verformungskundliches Kolloquium. p. 239-247

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Charakterisierung unterschiedlicher Schmierstoffe hinsichtlich des Reibzahlverlaufs beim Schmieden einer Aluminiumlegierung

    Maderthoner, G., 2006

    Research output: Thesis › Diploma Thesis

  86. Published

    Creep fatigue in extrusion dies - modelling and simulation

    Sommitsch, C., Wlanis, T., Hatzenbichler, T. & Wieser, V., 2006, In: Steel grips : journal of steel and related materials. 4, p. 51-55

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Creep fatigue of multi-part container during hot extrusion of copper - simulation and experimental comparison

    Wlanis, T., Krumphals, F., Sommitsch, C. & Wieser, V., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  88. Published

    Design and Commissioning of a Rotational Forging Tribometer

    Markut, K. C., 2006

    Research output: Thesis › Diploma Thesis

  89. Published

    Determination of Material Parameters for porous Materials

    Hatzenbichler, T., Planitzer, F., Buchmayr, B., Köppl, R. & Ecker, W., 2006, ESAFORM 2006. p. 155-158

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Die hoch hinaus wollen

    Sommitsch, C., 2006, In: Wirtschafts-Blatt : Österreichs unabhängige Tageszeitung für Wirtschaft & Finanzen. p. 10-11

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Druckguss als Basis für Innovationen Teil 2

    Rockenschaub, H. & Pabel, T., 2006, In: Druckguss-Praxis. p. 143-184

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Druckguss - Basis für Innovationen Teil 1

    Rockenschaub, H. & Pabel, T., 2006, In: Druckguss-Praxis. p. 97-109

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Dynamic recrystallization of NI-base alloys-Experimental results and comparisons with simulations

    Poelt, P., Sommitsch, C., Mitsche, S. & Walter, M., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 306-314

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Einflussgrößen auf die mechanisch-technologischen Eigenschaften von Schmiedeteilen aus AFP-Stählen

    Lehofer, H., Gelder, S., Taschauer, M. & Buchmayr, B., 2006, XXV. Verformungskundliches Kolloquium. p. 63-71

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Ein Stoff für alle Härtefälle

    Harlfinger, J. & Sommitsch, C., 2006, In: Der Standard : Österreichs unabhängige Tageszeitung für Wirtschaft, Politik und Kultur. p. 9-9

    Research output: Contribution to journal › Article › Transfer › peer-review

  96. Published

    Entwicklungszustand und Nutzen der FEM Simulation von Massivumformprozessen

    Hatzenbichler, T., Harrer, O.-K. & Buchmayr, B., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 469-474

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Entwicklung von walzplattierten Aluminium-Stahl Verbunden für die Umformung in der Automobilindustrie

    Bichler, C., Brandecker, M., Buchner, M. & Buchmayr, B., 2006, 4. Ranshofener Leichtmetalltage. p. 233-249

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Erhöhte mechanische Eigenschaften der Druckgusslegierung AlSi9Cu3(Fe) durch optimierte Ausscheidungsverteilung infolge Kombination von Kalt- und Waremauslagerung

    Pabel, T., Rockenschaub, H., Geier, G. F. & Hopfinger, M., 2006, In: Gießerei-Rundschau. p. 175-185

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Feature extraction from micrographs of forged nickel based alloy

    Rinnhofer, A., Benesova, W., Jakob, G. & Stockinger, M., 2006, Proceedings - 18th International Conference on Pattern Recognition, ICPR 2006. p. 391-394 4 p. 1699227. (Proceedings - International Conference on Pattern Recognition; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Gesamtüberblick über das MCL Projekt M8, Mai 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  101. Published

    Influence of alloying, forming and cooling on the mechanical properties of direct air cooled medium carbon low alloy steels

    Lehofer, H., Gelder, S., Taschauer, M. & Buchmayr, B., 2006, In: Steel grips : journal of steel and related materials. 4, p. 290-294

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Investigation and numerical modelling of extrusion tool life time

    Redl, C., Wieser, V., Sommitsch, C., Wlanis, T., Schützenhöfer, W., Gaudin, S. & Geigges, B., 2006, Proceedings of 7th International Tooling Conference, M. Rosso, M. A. Grande, D. Uguespp (Eds.),. p. 589-596

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    Investigations on fracture of a Ni-base alloy at elevated temperatures by continuum damage mechanics

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2006, Proceedings of the 9th International Conference on Material Forming, ESAFORM. p. 175-178

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 12 3 4 5 6 7 8 Next
View graph of relations

Contact information

Franz-Josef Straße 18, 8700 Leoben