Chair of Metal Forming (560)

Organisational unit: Chair

151 - 200 out of 731Page size: 50

Research output

  1. 2017
  2. Published

    Kühlperformance beim Spritzgießen von Kunststoffen. Verleich einer konturnahen und einer blutgefäßartigen Werkzeugkühlung mit einem Formeinsatz höherer Wärmeleitfähigkeit

    Berger, G., Panzl, G., Zorn, D., Bevc, F. & Friesenbichler, W., Jun 2017, Rapid.Tech – International Trade Show & Conference for Additive Manufacturing : Proceedings of the 14th Rapid.Tech Conference Erfurt, Germany, 20 – 22 June 2017. Kynast, M., Eichmann, M. & Witt, G. (eds.). p. 123-139

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    The Journey of one square millimeter wire surface

    Fritz, R., Bucher, C. & Buchmayr, B., Jun 2017, Conference Proceeding ESTAD 2017. p. 2285 - 2294 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Auslegung konturnaher Kühlsysteme für Spritzgießwerkzeuge. Vergleich von SLM-gedruckten mit hochwärmeleitfähigen konventionellen Formeinsätzen

    Berger, G., Zorn, D., Panzl, G. & Bevc, F., 21 Apr 2017, p. 229-243. 15 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  5. Published

    Auslegung konturnaher Kühlsysteme für Spritzgießwerkzeuge. Vergleich von SLM-gedruckten mit hochwärmeleitfähigen konventionellen Formeinsätzen

    Berger, G., Zorn, D., Panzl, G. & Bevc, F., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 229-243 15 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Laser Powder Bed Fusion – Materials Issues and Optimized Processing Parameters for Tool steels, AlSiMg- and CuCrZr-Alloys

    Buchmayr, B., Panzl, G., Walzl, A. & Wallis, C., Apr 2017, In: Advanced engineering materials. 19.2017, 4, 11 p., 1600667.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Systemanalysetechniken kontinuierlich hergestellter Stahlprodukte

    Fritz, R. & Buchmayr, B., 21 Mar 2017, XXXVI.Verformungskundliches Kolloquium. Leoben, p. 158-165 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Über die Bedeutung des Werkzeugbaus für die Blechumformung

    Buchmayr, B., 18 Mar 2017, Tagungsband XXXVI. Verformungskundliches Kolloquium. Buchmayr, B. (ed.). Leoben, p. 40 - 44 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. E-pub ahead of print

    Cold pilgering of duplex steel tubes: The response of austenite and ferrite to excessive cold deformation up to high strains

    Ragger, K., Primig, S., Daniel, R., Kaiser, R., Paal, J., Mitterer, C. & Buchmayr, B., 16 Mar 2017, (E-pub ahead of print) In: Materials characterization. 128.2017, June, p. 257–268 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Topologieoptimierung - Entwicklungswerkzeug für die additive Fertigung

    Walzl, A. & Buchmayr, B., 16 Feb 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 162.2017, 3, p. 110-116 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. E-pub ahead of print

    The influence of microstructure on the cyclic deformation and damage of copper and an oxide dispersion strengthened steel studied via in-situ micro-beam bending

    Howard, C. B., Fritz, R., Alfreider, M., Kiener, D. & Hosemann, P. M., 22 Jan 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 687.2017, 27 February, p. 313-322 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Austrian conference highlights innovations in metal Additive Manufacturing

    Buchmayr, B. & Stampfl, J., 2017, 3 p.

    Research output: Other contribution › Research

  13. Published

    Charakterisierung der Gefügeentwicklung und Umformbarkeit bei der Halbwarmumformung von Stählen

    Kromoser, G., 2017

    Research output: Thesis › Diploma Thesis

  14. Published

    Damage, Lifetime, and Repair of Forging Dies

    Buchmayr, B., 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 162.2017, 3, p. 88-93 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Direkte Wärmebehandlung aus der Schmiedehitze - Konzepte, Neue Entwicklungen, Umsetzung

    Reinisch, M., 2017

    Research output: Thesis › Master's Thesis

  16. Published

    Influence of the processing route on the microstructure and mechanical behaviour of bainitic forging steels

    Eggbauer, G., 2017

    Research output: Thesis › Doctoral Thesis

  17. Published

    Konzeptionelle Optimierung qualitätssichernder Maßnahmen für geschmiedete Turbinenscheiben aus hochwarmfesten Nickellegierungen

    Feichter, M., 2017

    Research output: Thesis › Master's Thesis

  18. Published

    Manufacture of Steel Tubular Products

    Lundberg, S.-E., Allgood, L. E., Lamb, C. W., Ragger, K., Paal, J. & Buchmayr, B., 2017, The Making, Shaping and Treating of Steel, Long Products. Lundberg, S.-E. (ed.). Warrendale, PA, Vol. 11. p. 657 - 730 73 p. Chapter 7

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  19. Published

    Multi-axiale Metallumformung - Aktueller Status und zukünftige Potentiale

    Schwarz, A., 2017

    Research output: Thesis › Master's Thesis

  20. Published

    Optimierung des Herstellprozesses von geschmiedeten Turbinenscheiben für optimalen Direct-Age-Effekt unter Berücksichtigung von abnormalem Kornwachstum

    Bucher, C., 2017

    Research output: Thesis › Master's Thesis

  21. Published

    Thermomechanical Treatment of Steels - A Real Disruptive Technology Since Decades

    Buchmayr, B., 2017, In: Steel research international. 88.2017, 10, 14 p., 1700182.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Werkstoffspezifische Einflüsse auf das Warmumformvermögen

    Buchmayr, B., 2017, Proceedings 22. Umformtechnisches Kolloquium Hannover. Hannover, p. 95 - 102 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Wiki-based knowledge management for tool making and sheet metal forming

    Schlögl, J. & Buchmayr, B., 2017, 26th International Association for Management of Technology Conference, IAMOT 2017. p. 1681 - 1688 8 p. (26th International Association for Management of Technology Conference, IAMOT 2017).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. 2016
  25. Published

    Topology optimisation: Design tool for future manufacturing methods

    Walzl, A. & Buchmayr, B., 25 Nov 2016. 9 p.

    Research output: Contribution to conference › Presentation › Research

  26. Published

    Additive manufacturing of maraging steel on a copper substrate using selective laser melting

    Wallis, C., Buchmayr, B., Kitzmantel, M. & Brandstätter, E., 24 Nov 2016.

    Research output: Contribution to conference › Paper

  27. Published

    Evolution of transformation plasticity for bainitic forging steels

    Eggbauer, G. & Buchmayr, B., 26 Oct 2016.

    Research output: Contribution to conference › Presentation › Research

  28. Published

    Evolution of transformation plasticity for bainitic forging steels

    Eggbauer, G. & Buchmayr, B., 26 Oct 2016, 5th International Conference on Thermomechanical Processing, Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Interplay between sample size and grain size: Single crystalline vs. ultrafine-grained chromium micropillars

    Fritz, R., Maier-Kiener, V., Lutz, D. & Kiener, D., 30 Sept 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674.2016, 30 September, p. 626-633 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Optimized cooling strategies for baintic forging steels

    Eggbauer, G., 19 Sept 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  31. Published

    Den chinesischen Weg zur Weltmacht verstehen und zukünftige Entwicklungen erkennen

    Buchmayr, B., Jul 2016, In: Gießerei-Rundschau. 63.2016, 07-08, p. 165-168 4 p.

    Research output: Contribution to journal › Article › Research

  32. Published

    Mechanical properties of low-alloy-steels with bainitic microstructures and varying carbon content

    Weber, A., Klarner, J., Vogl, T., Schöngrundner, R., Sam, G. & Buchmayr, B., 14 Apr 2016, In: IOP Conference Series: Materials Science and Engineering. 2016, 119/1, 012005.

    Research output: Contribution to journal › Conference article › peer-review

  33. Published

    Damage minimised ball spinning process design

    Kuss, M. & Buchmayr, B., 14 Mar 2016, In: Journal of materials processing technology. 234.2016, August, p. 10-17 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Eigenspannungsoptimiertes Richtkonzept: Anwendung auf Langprodukte

    Kaiser, R., Antretter, T. & Buchmayr, B., 5 Mar 2016, Tagungsgband XXXV. Verformungskundliches Kolloquium 2016: Tagungsband. Buchmayr, B. (ed.). Leoben: Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 153-159 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    OBERFLÄCHENDEFEKTE IN DER FEINSTDRAHTHERSTELLUNG

    Fritz, R. & Buchmayr, B., Mar 2016, Tagungsband XXXV. Verformungskundliches Kolloquium 2016. Leoben: Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 135-140 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    A fém alkatrészek elöállitására szolgáló additiv gyártástechnológia SWOT-analizise és alkalmazása

    Buchmayr, B., Panzl, G., Buzáné (Translator), Dénes, M. (Translator) & Klug, O. (Translator), Jan 2016, In: Bányászati és Kohászati Lapok. p. 29-34 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Alternative Fertigung eines Druckgussteils durch Tiefziehen und Optimierung der Fertigungstechnologie

    Hasenöhrl, S. & Wallner, A. H., 2016

    Research output: Thesis › Master's Thesis

  38. Published

    Anwendung mittels Laserstrahlung induzierter thermischer Spannungen auf den Richtprozess von Blechen

    Ratzenberger, F. R., 2016

    Research output: Thesis › Master's Thesis

  39. Published

    Critical assessment 18: Bainitic forging steels

    Buchmayr, B., 2016, In: Materials science and technology. 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Einsatz der additiven Fertigung beim Design bionischer Strukturen für den Leichtbau

    Aigner, A., 2016

    Research output: Thesis › Master's Thesis

  41. Published

    Investigation of Ball Spinning

    Kuss, M., 2016

    Research output: Thesis › Doctoral Thesis

  42. Published

    Konzept und Prozessoptimierung für die Herstellung bainitischer nahtloser Rohre mit speziellen Eigenschaften

    Weber, A. M., 2016

    Research output: Thesis › Doctoral Thesis

  43. Published

    MACRO- and MICROSCOPIC Properties of Gradient Ultra-High-Strength seamless Steel Tubes Produced by dedicated thermo-mechanical treatments

    Winter, G., Klarner, J., Buchmayr, B. & Keckes, J., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  44. Published

    Numerical analysis of tube gas forming at elevated temperatures of AA 6060 alloy

    Tomasch, M., 2016

    Research output: Thesis › Master's Thesis

  45. Published

    Optimized cooling strategies for bainitic forging steels

    Eggbauer, G. & Buchmayr, B., 2016.

    Research output: Contribution to conference › Paper › peer-review

  46. Published

    Prozess- und Produktoptimierung zur Herstellung von kaltgepilgerten Rohren aus Edelstahl

    Ragger, K., 2016

    Research output: Thesis › Doctoral Thesis

  47. Published

    Voruntersuchungen zu hybriden Werkstoffverbindungen gefertigt mittels selektivem Laserschmelzen

    Cislo, C., 2016

    Research output: Thesis › Diploma Thesis

  48. Published

    Warum Komponenten versagen: Eine Einführung in die Schadensanalyse

    Buchmayr, B., 2016, Lean Smart Maintenance. Biedermann, H. (ed.). Leoben, p. 125-139

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  49. 2015
  50. Published

    Charakterisierung von Eigenspannungen und Verzug an robotergeschweißten K-Knoten

    Stix, G. & Buchmayr, B., 17 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  51. Published

    Alterung im eutektoiden Stahldraht: Mess- und Lösungsmethoden

    Fritz, R. & Buchmayr, B., 14 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  52. Published

    Aktuelle Entwicklungstrends und zukünftige Herausforderungen im Bereich der Umformtechnik

    Buchmayr, B., 15 Aug 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160.2015, 10-11, p. 501-506 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Investigation of residual stresses and distortions produced in tubular K-joint

    Stix, G. & Buchmayr, B., 3 Jul 2015.

    Research output: Contribution to conference › Presentation › Research

Previous 1 2 3 4 5 6 7 8 ...15 Next
View graph of relations

Contact information

Franz-Josef Straße 18, 8700 Leoben