Chair of Mechanical Engineering (140)

Organisational unit: Chair

1001 - 1050 out of 1,376Page size: 50

Research output

  1. 2009
  2. Published

    Ansätze zur spannungsbasierenden und bruchmechanischen Charakterisierung des Ermüdungsverhaltens von glasfaserverstärktem Polyamid

    Mösenbacher, A., 2009

    Research output: Thesis › Diploma Thesis

  3. Published

    Anwendung einer Prüfmethodik zur tribologischen Untersuchung des Systems Kolbenring-Zylinderlaufbahn von Großmotoren

    Schiffer, J., Godor, I., Grün, F., Krampl, H., Eichlseder, W., Dibiasi, W. & Strobl, V., 2009, Tribologie Fachtagung 2009: Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Applicability of high strength thread forming Aluminum bolts in magnesium power train components: Proceedings 2009 - 9th European All-Wheel Drive Congress Graz

    Gerstmayr, G., Oberhuber, P., Jakob, T. & Leitner, H., 2009

    Research output: Non-textual form › Web publication/site › Research

  5. Published

    Bauteilversagen

    Eichlseder, W., 2009, Bauteilversagen, Beitrag im Buch "Leichtbau". p. 49-75

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  6. Published

    Berücksichtigung der Porenverteilung bei der betriebsfesten Auslegung von Aluminium-Druckgussbauteilen

    Oberwinkler, C. & Eichlseder, W., 2009, In: Gießerei-Rundschau. p. 168-173

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Betriebsfeste Auslegung von Aluminiumdruckgussteilen unter Berücksichtigung der Porenverteilung im Bauteil

    Oberwinkler, C., Eichlseder, W., Schönfeld, F., Schmidt, S. & Leitner, H., 2009, In: Druckguss-Praxis. p. 97-103

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Betriebsfeste Auslegung von Aluminiumdruckgussteilen unter der Berücksichtigung der Porenverteilung im Bauteil

    Oberwinkler, C., Eichlseder, W., Schönfeld, F., Schmidt, S. & Leitner, H., 2009, Gießtechnik im Motorenbau - Anforderungen der Automobilindustrie. p. 173-189

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Betriebsfeste Dimensionierung von faserverstärkten Kunststoffkomponenten – eine durchgängige Simulationskette von der Spritzgusssimulation zur Schädigungsrechnung

    Guster, C., Pinter, G. & Eichlseder, W., 2009, Kunststoffgerecht simulieren – Auslegung von Spritzgussbauteilen mit CAE. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Bewertung von Antriebskonzepten für die Lineareinheit eines Blockgerüsts

    Azizi, K., 2009

    Research output: Thesis › Diploma Thesis

  11. Published

    Charcterization of the tribological properties of polymer basis compounds in respect to component application

    Godor, I., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  12. Published

    Combination of Safe Life and Fail Safe Concepts to Assess the Lifetime of Ti-6Al-4V Forgings

    Oberwinkler, B., Leitner, H. & Riedler, M., 2009, TMS 2009 - Supplemental Proceedings. p. 77-84

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Comparative studies of hardened surface layers under contact stress

    Trausmuth, A., Godor, I., Stoschka, M. & Eichlseder, W., 2009, Advances in Experimantal Mechanics. p. 263-264

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Comparison of gear tooth root stresses by analytical, numerical and experimental evaluation

    Leitner, M., Haberer, C. & Eichlseder, W., 2009, 26th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 269-270

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Comparison of gear tooth root stresses by analytical, numerical and experimental evaluation

    Leitner, M., Haberer, C. & Eichlseder, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    Computational Fatigue Optimization – Application for purposeaimed Component and Forging Process Design

    Riedler, M., Stockinger, M., Stoschka, M., Oberwinkler, B. & Tan, W., 2009, Eucomas2009. p. 20-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Cost and Weight Optimization of Magnesium Power Train Components by Using Aluminum Thread Forming Fastener Technology

    Jakob, T., Gerstmayr, G., Leitner, H., Oberhuber, P. & Hinteregger, C., 2009, In: SAE technical papers. 10 p., 2009-01-1256.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Creep and Relaxation Behaviour of Mg-Al based Die cast Alloys AZ91 and AE44

    Gerstmayr, G., Leitner, H. & Eichlseder, W., 2009, Creep and Relaxation Behaviour of Mg-Al based Die cast Alloys AZ91 and AE44. GDMB, p. ---

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Creep and Relaxation Behaviour of Self-tapping Al-bolts in Mg Die Cast Alloys for Power Train Components

    Gerstmayr, G. & Eichlseder, W., 2009, Magnesium - 8th International Conference on Magnesium Alloys and their Applications. p. 1097-1106

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  20. Published

    Damage Tolerant Design of Mg-HPDC Components

    Oberwinkler, C., Eichlseder, W. & Seebacher, M., 2009, Magnesium. p. 126-132

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Design and analysis methods and tools

    Eichlseder, W., 2009, Volume 1. p. 35-49

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Design of alternative part fitting for microstructural reference tests

    Tan, W. & Stoschka, M., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Development of a Flexible Program Architecture for Shape Optimization with Finite Elements

    Kainzinger, P., 2009, 96 p.

    Research output: Thesis › Diploma Thesis › peer-review

  24. Published

    Development of a Fretting Testing and Evaluation Method

    Reiser, J., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  25. Published

    Development of a Fretting Testing and Evaluation Method

    Reiser, J. (Editor), 2009, Leoben.

    Research output: Book/Report › Anthology › Research

  26. Published

    Development of a Fretting Wear Parameter for Implementation of Wear in a Numerical Analysis

    Christiner, T., Godor, I., Kainzinger, P. & Eichlseder, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    Development of a Fretting Wear Parameter for Implementation of Wear in a Numerical Analysis

    Christiner, T., Godor, I., Kainzinger, P. & Eichlseder, W., 2009, 26th Symposium on Advances in Experimental Mechanics. p. 12-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Development of a test methodology for the system piston ring - cylinder liner

    Schiffer, J., Godor, I., Grün, F. & Eichlseder, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    Development of a test methodology for the system piston ring - cylinder liner

    Schiffer, J., Godor, I., Grün, F. & Eichlseder, W., 2009, Proceedings of 26th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 199-200

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    EFFECTS OF ANISOTROPY AND EFFECTIVE STRAIN ON THE FATIGUE PROPERTIES OF A TITANIUM ALLOY

    Tan, W., Stoschka, M., Riedler, M. & Eichlseder, W., 2009, 26th symposium on advances in experimental mechanics. p. 271-272

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    EFFECTS OF ANISOTROPY AND EFFECTIVE STRAIN ON THE FATIGUE PROPERTIES OF A TITANIUM ALLOY

    Tan, W., Stoschka, M., Riedler, M. & Eichlseder, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    Effects of temperature and moisture on the tensile/tensile fatigue behavior of an injection molded sgf-reinforced partial aromatic polyamide

    Guster, C., Pinter, G., Eichlseder, W. & Lang, R., 2009, 12th International Conference on Fracture, ICF 13. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Einfluss der Porosität auf die Betriebsfestigkeit von Al-Druckgussbauteilen

    Powazka, D. P., 2009, 124 p.

    Research output: Thesis › Doctoral Thesis

  34. Published

    Einfluss von Faserorientierung, Temperatur und Feuchtigkeit auf das Schwingfestigkeitsver-halten von spritzgegossenen kurzfaserverstärkten Thermoplasten

    Gaier, C., Fleischer, H., Guster, C. & Pinter, G., 2009, 36. Tagung DVM-Arbeitskreis Betriebsfestigkeit - Einflussgrößen auf die Betriebsfestigkeit bei der Bauteil- und Systementwicklung. p. 121-132

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Einfluss von Porosität und multiaxialer Belastung auf die Schwingfestigkeit einer Magnesium-Druckgusslegierung

    Seebacher, M., 2009

    Research output: Thesis › Diploma Thesis

  36. Published

    Einige Gesetzmäßigkeiten über das tribologische Verhalten von ungefüllten und gefüllten TPU-Materialien

    Godor, I., Schiffer, J., Grün, F., Major, Z. & Schwarz, T., 2009, Tribologie Fachtagung 2009: Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Energiebasierende Lebensdauerbewertung von Nickellegierungen

    Köberl, H., Winter, G. & Eichlseder, W., 2009, In: Materialprüfung. 5/2009, p. 276-286

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Entwicklung einer Untersuchungsmethodik zur Evaluierung des Fretting Widerstandes

    Reiser, J. (Editor), Christiner, T. (Editor) & Godor, I. (Editor), 2009, Wien: Österreichische Tribologische Gesellschaft.

    Research output: Book/Report › Anthology › Research

  39. Published

    Entwicklung eines Modells zur Beschreibung des Lebensdauerverhaltens von NE-Legierungen (Al, Cu, Ni) unter thermomechanischer Beanspruchung

    Köberl, H., 2009

    Research output: Thesis › Doctoral Thesis

  40. Published

    Entwicklung eines neuartigen Prüfkonzepts zur Ermittlung der lokalen Zahnfußtragfähigkeit von Hypoidtellerrädern

    Herics, P., 2009

    Research output: Thesis › Diploma Thesis

  41. Published

    Estimation of the local porosity of aluminium high-pressure die casting components from casting simulation results using self-organizing maps

    Oberwinkler, C., Eichlseder, W. & Leitner, H., 2009, In: International foundry research = Giessereiforschung. p. 22-33

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Experimental definition of a failure model for the tribological behaviour of polytetrafluorethylene bronze compounds

    Godor, I., Major, Z., Vezér, S. & Grün, F., 2009, In: Proceedings of the Institution of Mechanical Engineers. Part J, Journal of engineering tribology. 223, p. 807-815

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Experimental methods to investigate the run-ning-in properties of soft coatings

    Grün, F., Godor, I. & Eichlseder, W., 2009, Proceedings of 26th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 273-274

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Experimental methods to investigate the run-ning-in properties of soft coatings

    Grün, F., Godor, I. & Eichlseder, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  45. Published

    Experimental methods to investigate the running-in properties of soft coatings

    Grün, F., Gódor, I. & Eichlseder, W., 2009, 26th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 273-274 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Fatigue Life Behavior of a Hypoid Gear Tooth Root Taking the Influences of Orbital Forging into Account

    Haberer, C., Eichlseder, W., Dietrich, A. & Leitner, H., 2009, SAE World Congress, Paper No. 2009-01-0812. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Fatigue Life Behavior of a Hypoid Gear Tooth Root Taking the Influences of Orbital Forging into Account

    Haberer, C. & Leitner, H., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    Four Point Bending Fatigue Tests of Forged Ti 6Al 4V

    Oberwinkler, B., Riedler, M., Leitner, H. & Javidi, A., 2009, In: MP materials testing : Materialprüfung . 51, p. 580-586

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Fretting wear: Combined numerical and experimental investigations T.

    Christiner, T., Wohlfahrt, M., Reiser, J., Gänser, H.-P., Godor, I. & Eichlseder, W., 2009, MPA-2009 3rd International Meeting on Developments in Materials, Processes and Applications of Emerging Technologies. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Fundamentals of optimizing Aluminium-based journal bearing materials

    Grün, F., Godor, I. & Eichlseder, W., 2009, In: Proceedings of the Institution of Mechanical Engineers. Part J, Journal of engineering tribology. 223, p. 777-785

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Funktionsweise und Gebrauchsdauer von Gleitlagerwerkstoffen

    Grün, F., Godor, I., Gärtner, W. & Eichlseder, W., 2009, Lebensdauer und Energieeffizienz. p. 127-135

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...17 18 19 20 21 22 23 24 ...28 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 1401