Chair of Mechanical Engineering (140)

Organisational unit: Chair

551 - 600 out of 1,376Page size: 50

Research output

  1. 2015
  2. Published

    START-STOP OPERATION AS INFLUENCE FACTOR ON PLAIN BEARING LIFETIME

    Summer, F., Grün, F., Offenbecher, M. & Lainé, E., 4 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  3. Published

    International Conference on Materials, Processing and Product Engineering: Thermal Stability of Residual Stresses in Ti-6Al-4V components

    Stanojevic, A., Oberwinkler, B. & Angerer, P., 3 Nov 2015, p. 69. 69 p.

    Research output: Contribution to conference › Abstract › peer-review

  4. Published

    International Conference on Materials, Processing and Product Engineering: Estimation of Material Parameters in Nonlinear Hardening Plasticity Models and Strain Life Curves for CuAg Alloy

    Stanojevic, A., Srnec Novak, J., Benasciutti, D., De Bona, F., De Luca, A. & Raffaglio, Y., 3 Nov 2015, p. 68. 68 p.

    Research output: Contribution to conference › Abstract › peer-review

  5. Published

    Effect of post-weld heat treatment on the fatigue strength of HFMI-treated mild steel joints

    Leitner, M., Mössler, W., Putz, A. & Stoschka, M., 1 Nov 2015, In: Welding in the world. 59, 6, p. 861-873 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Quantifizierung der ermüdungsrelevanten Mikroporengrößen mittels CT-Analyse an Aluminium Gussbauteilen

    Garb, C., Kainzinger, P. & Tauscher, M., 8 Oct 2015, Bericht 142, Betriebsfestigkeits - Bauteile und Systeme unter komplexer Belastung, 42. Tagung des Arbeitskreises Betriebsfestigkeit. p. 313 - 322 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Accepted/In press

    Effect of local stress state on fatigue strength of welded T-joints

    Ottersböck, M., Leitner, M. & Stoschka, M., 27 Sept 2015, (Accepted/In press) Mathematical Modelling of Weld Phenomena 11. p. 1-19

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    CHARACTERISATION OF SEVERAL LUBRICANTS IN CASE OF DIE FORGING OF ALUMINIUM ALLOYS BY THE RING COMPRESSION TEST

    Milosevic, I. & Hatzenbichler, T., 22 Sept 2015, 32nd Danubia-Adria Symposium on Advances in Experimental Mechanics.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Concept of Fatigue Design Methodology for short fibre reinforced Polymers considering Environmental Conditions

    Primetzhofer, A., Pinter, G., Mösenbacher, A. & Haslinger, T., 22 Sept 2015.

    Research output: Contribution to conference › Paper

  10. Published

    The 13th World Conference on Titanium 2015: Stability of Residual Stresses in Ti-6Al-4V Components due to Mechanical Loads

    Stanojevic, A., Maderbacher, H., Oberwinkler, B. & Angerer, P., 16 Aug 2015.

    Research output: Contribution to conference › Abstract › peer-review

  11. Published

    Final report-HCF and TMF tests on specimens of an aluminium cast material

    Huter, P., 14 Aug 2015

    Research output: Book/Report › Commissioned report › Research

  12. Published

    INFLUENCE OF MEAN STRESS AND WELD LINES ON THE FATIGUE BEHAVIOUR OF SHORT FIBRE REINFORCED POLYAMIDE

    Primetzhofer, A., Pinter, G. & Mösenbacher, A., 24 Jul 2015.

    Research output: Contribution to conference › Presentation › Research

  13. Published

    INFLUENCE OF MEAN STRESS AND WELD LINES ON THE FATIGUE BEHAVIOUR OF SHORT FIBRE REINFORCED POLYAMIDE

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 24 Jul 2015. 10 p.

    Research output: Contribution to conference › Paper

  14. Published

    Tribological study of crankshaft bearing systems: Comparison of forged steel and cast iron counterparts under start–stop operation

    Summer, F., Grün, F., Schiffer, J., Godor, I. & Papadimitriou, I., 8 Jul 2015, In: Wear. 338-339, p. 232-241

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Fatigue strength of welded ultra high-strength steel joints

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., 3 Jul 2015.

    Research output: Contribution to conference › Paper

  16. Published

    HCF and TMF tests on specimens of an aluminium cast material (sampling position cylinder head – combustion chamber)

    Huter, P., 1 Jul 2015, 12 p.

    Research output: Book/Report › Commissioned report › Research

  17. Published

    Effect of loading type on welded and HFMI-treated T-joints: XIII-2584-15

    Ottersböck, M., Leitner, M. & Stoschka, M., 29 Jun 2015.

    Research output: Contribution to conference › Paper

  18. Published

    Application of local approaches to assess the fatigue crack: XIII-WG3-36-15

    Stoschka, M., Leitner, M. & Ottersböck, M., 28 Jun 2015. 18 p.

    Research output: Contribution to conference › Presentation › Research

  19. Published

    Material Modelling for Fatigue Life Calculation of Short Fibre Reinforced Injection Moulded Parts with FEMFAT

    Mösenbacher, A., Primetzhofer, A., Pichler, P., Koblmiller, T., Maier, J. & Pinter, G., 10 Jun 2015.

    Research output: Contribution to conference › Presentation › Research

  20. Published

    Material Modelling for Fatigue Life Calculation of Short Fibre Reinforced Injection Moulded Parts with FEMFAT

    Mösenbacher, A., Primetzhofer, A., Pichler, P., Koblmiller, T., Maier, J. & Pinter, G., 10 Jun 2015, 10th International FEMFAT User Meeting 2015 HANDOUT: Ligthweight Design and New Materials. Steyr, 28 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Simulative Investigations of a Close-to-Component Journal Bearing System and Comparison with Test Data

    Bergmann, P., Grün, F., Godor, I. & Hager, G., 5 Jun 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  22. Published

    Tribometric assessment of start stop journal bearing wear with the aid of a component close test methodology

    Summer, F., Grün, F., Godor, I., Offenbecher, M. & Lainé, E., 3 Jun 2015, Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    12th International Conference on the Mechanical Behavior on of Materials: Thermal Stability of Residual Streses in Ti-6Al-4V components

    Stanojevic, A., Maderbacher, H., Angerer, P. & Oberwinkler, B., 10 May 2015.

    Research output: Contribution to conference › Abstract

  24. Published

    Influence of Manufacturing Technology on the Loadability of Gear Systems

    Grün, F., Godor, I. & Dietrich, A., 17 Apr 2015, Proceedings of the European All-Wheel Drive Congress 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Material fatigue models and design methodology for short fibre reinforced polymers based on damage accumulation hypothesis

    Pinter, G., Mösenbacher, A., Maier, J., Primetzhofer, A. & Guster, C., 31 Mar 2015, Proceedings 16th International Conference on Deformation Yield and Fracture of Polymers.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Quartalsreviewbericht_Q1-2015

    Primetzhofer, A., 30 Mar 2015

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    Quartalsreviewbericht_Q2-2015

    Primetzhofer, A., 30 Mar 2015

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. Published

    Quartalsreviewbericht_Q3-2015

    Primetzhofer, A., 30 Mar 2015

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    Quartalsreviewbericht_Q4-2015

    Primetzhofer, A., 30 Mar 2015

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. Published

    Hyperworks applicaton examples regarding structural steel lightweight design

    Stoschka, M., 20 Mar 2015. 37 p.

    Research output: Contribution to conference › Presentation › Transfer

  31. Published

    Study of the support effect of welded high-strength steel joints

    Ottersböck, M., Leitner, M. & Stoschka, M., 5 Mar 2015.

    Research output: Contribution to conference › Presentation › Research

  32. Published

    Stützwirkungseffekt bei der Ermüdungsfestigkeit hochfester Stahlschweißverbindungen

    Ottersböck, M., Leitner, M. & Stoschka, M., 12 Feb 2015.

    Research output: Contribution to conference › Presentation › Research

  33. Published

    Damage prediction for un-coated and coated aluminum alloys under thermal and mechanical fatigue loadings based on a modified plastic strain energy approach: Lightweight Materials and Structural Solutions for Transport Applications

    Azadi, M., Farrahi, G. H., Winter, G., Huter, P. & Eichlseder, W., 5 Feb 2015, In: Materials and Design. 66, 5, p. 587 595 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Analysemodell zur Bewertung von Potenzial und effektiver Nutzung von Strukturbauteilen aus faserverstärkten Kunststoffen hinsichtlich Steifigkeit und Festigkeit

    Lembeck, A., 2015

    Research output: Thesis › Diploma Thesis

  35. Published

    Application studies for the fatigue strength improvement of welded structures by high-frequency mechanical impact (HFMI) treatment

    Yildirim, H. C., Leitner, M., Marquis, G. B., Stoschka, M. & Barsoum, Z., 2015.

    Research output: Contribution to conference › Presentation › Research

  36. Published

    Beitrag zur Schwingfestigkeit von HFMI-behandelten Proben und Diskussion lokaler Ansätze zur Bauteilauslegung

    Stoschka, M. & Leitner, M., 2015. 19 p.

    Research output: Contribution to conference › Presentation › Research

  37. Published

    Contact Fatigue Life Investigation and Wear Mechanisms of Different Case Hardened and Nitrided Steels

    Trausmuth, A., Gódor, I. & Dietrich, A., 2015, Key engineering materials. 604 ed. Vol. 2014. p. 51-54 4 p. (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  38. Published

    Crack propagation analysis and rehabilitation by HFMI of pre-fatigued welded structures

    Leitner, M., Barsoum, Z. & Schäfers, F., 2015.

    Research output: Contribution to conference › Presentation › Research

  39. Published

    Crack propagation analysis of welded joints by numerical and experimental investigations

    Shah, S., 2015

    Research output: Thesis › Diploma Thesis

  40. Published

    Development of a Fatigue Testing System for CFRP Under Combined Cyclic and Impact Load

    Bärnthaler, C., 2015

    Research output: Thesis › Master's Thesis

  41. Published

    Development of Ring on Disc Tests for Elastomeric Sealing Materials

    Hausberger, A., Grün, F., Godor, I., Pinter, G. & Schwarz, T., 2015, Proceedings of the International Tribology Conference 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Entwicklung einer Prüfmethodik zur Charakterisierung der Haftfestigkeit im Gusszustand gießtechnisch hergestellter Aluminium-Verbundwerkstoffe

    Reisenberger, J. J., 2015

    Research output: Thesis › Master's Thesis

  43. Published

    Entwicklung einer Umlaufbiegeprüfmaschine zur Bewertung des Größeneffekts zyklisch beanspruchter Komponenten

    Doppler, M., 2015

    Research output: Thesis › Master's Thesis

  44. Published

    Fatigue assessment of universal cardan joint based on laboratory specimen tests

    Palma, P., Leitner, M. & Grün, F., 2015.

    Research output: Contribution to conference › Paper

  45. Published

    Fatigue crack growth under constant and variable amplitude loading at semi-elliptical and V-notched steel specimens

    Simunek, D., Leitner, M., Maierhofer, J. & Gänser, H.-P., 2015, In: Procedia Engineering. p. 348-361

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Fatigue strength of HFMI-treated high-strength steel joints under constant and variable amplitude block loading

    Leitner, M., Gerstbrein, S., Ottersböck, M. J. & Stoschka, M., 2015, In: Procedia Engineering. 101, p. 251-258 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Fretting tests for elastomeric sealing materials

    Hausberger, A., Godor, I., Schwarz, T., Berer, M. & Tockner, M., 2015.

    Research output: Contribution to conference › Poster › Research

  48. Published

    Integration of Local Material Properties into Fatigue Design for Engineering Materials

    Kainzinger, P., Grün, F., Redik, S. & Mösenbacher, A., 2015.

    Research output: Contribution to conference › Presentation › Research

  49. Published

    Investigation of Influences on the Material Behavior of sgfr Plastics based on a Local S/N-curves Concept

    Primetzhofer, A., Mösenbacher, A., Grün, F. & Koblmiller, T., 2015.

    Research output: Contribution to conference › Poster › Research

  50. Published

    Korrosionsuntersuchungen von verschraubten Mg-Komponenten

    Jakob, T., 2015

    Research output: Thesis › Diploma Thesis

  51. Published

    Leichtbaupotential geschweißter Strukturen aus hochfestem Stahl

    Leitner, M., 2015, In: Schweiß- & Prüftechnik.

    Research output: Contribution to journal › Article › Research

Previous 1...8 9 10 11 12 13 14 15 ...28 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 1401