Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

Research output

  1. 2007
  2. Published
  3. Published

    Application of full-field strain and temperature measurement and analysis to polymer testing

    Major, Z., Steinberger, R., Feichter, C., Jerabek, M. & Lang, R., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 473-474

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  4. Published

    A test concept for lifetime prediction of polyethylene pressure pipes

    Pinter, G., Lang, R. & Haager, M., 2007, In: Monatshefte für Chemie = Chemical monthly. 138, p. 347-355

    Research output: Contribution to journalArticleResearchpeer-review

  5. Published

    Bestimmung der Druckfestigkeit von CFK-Laminatwerkstoffen

    Pilz, G. & Lang, R., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  6. Published

    Bestimmung der Kriech- und Zugeigenschaften für einen PTFE-Dichtungswerkstoff

    Pilz, G. & Lang, R., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  7. Published

    Bestimmung der Längenausdehnung von Eisstockzwischenplatten aus PA6 GF40

    Pinter, G. & Lang, R., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  8. Published

    Bestimmung der mechanischen Eigenschaften eines faserverstärkten thermoplastischen Hochleistungswerkstoffes

    Pinter, G. & Lang, R., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  9. Published
  10. Published

    Bestimmung von GIC-Werten in Anlehnung an pr DIN EN 6033

    Pinter, G. & Lang, R., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  11. Published

    Bestimmung von GIC-Werten nach DIN EN 6033 - Part A

    Pinter, G. & Lang, R., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  12. Published

    Bestimmung von ILSS-Werten nach DIN EN ISO 14130

    Wolfahrt, M., Pinter, G. & Lang, R., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  13. Published

    Characterisation and simulation of the time dependent deformation behaviour of polymer roller

    Berer, M. & Major, Z., 2007.

    Research output: Contribution to conferencePosterResearchpeer-review

  14. Published

    Characterisation, modelling and simulation of the impact behavior of foams

    Reiter, M., Knotz, C. & Major, Z., 2007.

    Research output: Contribution to conferencePosterResearchpeer-review

  15. Published

    Characterisation of the fatigue behavior of elastomer composites

    Kajtna, A., Vezer, S. & Major, Z., 2007.

    Research output: Contribution to conferencePosterResearchpeer-review

  16. Published

    Characterisation of the fatigue behavior of rubber by combined Wöhler on isocyclic analysis

    Vezer, S. & Major, Z., 2007.

    Research output: Contribution to conferencePosterResearchpeer-review

  17. Published

    Characterisation of the fatigue failure behavior of elastomer composites

    Kajtna, A., Vezer, S. & Major, Z., 2007.

    Research output: Contribution to conferencePosterResearchpeer-review

  18. Published

    Characterisation of the fracture behavior of elastomeres under complex loading conditions

    Major, Z., Lederer, K. & Lang, R., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 223-224

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  19. Published

    Characterisation of the friction behavior of table tennis rubbers

    Major, Z. & Lang, R., 2007, International Table Tennis Federation. p. 123-130

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  20. Published

    Characterisation of the magnetorheological behavior of fluids and elastomers

    Major, Z. & Filipcsei, G., 2007.

    Research output: Contribution to conferencePosterResearchpeer-review

  21. Published

    Characterisation of thermo-mechanical behavior of elastomers

    Major, Z., Feichter, C. & Steinberger, R., 2007.

    Research output: Contribution to conferencePosterResearchpeer-review

  22. Published

    Characterization of non-nanofilled resins M06n and M10n

    Pilz, G. & Karpf, R., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  23. Published
  24. Published
  25. Published
  26. Published

    Charakterisierung von Schrumpffolien

    Wallner, G. & Lang, R., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  27. Published

    Compression tests on sandfilled UP-Resins

    Pilz, G. & Lang, R., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  28. Published

    Cyclic crack growth tests with CRB specimens for the evaluation of the long-term performance of PE pipe grades

    Pinter, G., Haager, M., Balika, W. & Lang, R., 2007, In: Polymer Testing. 26, p. 180-188

    Research output: Contribution to journalArticleResearchpeer-review

  29. Published

    Degradation behavior of polymeric materials for solar thermal applications

    Wallner, G., 2007.

    Research output: Contribution to conferencePosterResearchpeer-review

  30. Published

    Degradation mechanisms of ethylene-vinyl-acetate copolymer - new studies including ultra fast cure foils

    Bregulla, M., Köhl, M., Lampe, B., Oreski, G., Philipp, D., Wallner, G. & Weiß, K.-A., 2007.

    Research output: Contribution to conferencePosterResearchpeer-review

  31. Published

    Determination of time dependent Poisson's ratio values in monotonic and creep tensile experiments

    Steinberger, R., Jerabek, M., Major, Z. & Lang, R., 2007.

    Research output: Contribution to conferencePosterResearchpeer-review

  32. Published

    Development of a compression tool for polymeric materials

    Jerabek, M., Steinberger, R. & Major, Z., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 471-472

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  33. Published

    DSC-Analyse eines Spitzenmaterials

    Wallner, G. & Lang, R., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  34. Published

    Dynamisch-mechanische Charakterisierung (DMA) von Thermoplasten

    Pilz, G. & Lang, R., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  35. Published
  36. Published
  37. Published
  38. Published
  39. Published

    Feuchtigkeitseinfluss auf die Zugeigenschaften von gepressten E/P-Kraftzellstoff-Faservliesen

    Pilz, G. & Rausch-Schott, O., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  40. Published

    Flatwise Tension Test an Aluminiumkernverbunden

    Pinter, G. & Lang, R., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  41. Published

    Influence of glass bead and talc fillers on the time and temperature dependent tensile behavior of polypropylene compounds

    Jerabek, M., Steinberger, R. & Major, Z., 2007, ATEM 2007. p. 0-0

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  42. Published

    Influence of nonylphenol-polyglycol-ether environments on the results of the full notch creep test

    Pinter, G., Haager, M. & Lang, R. W., 2007, In: Polymer Testing. p. 700-710

    Research output: Contribution to journalArticleResearchpeer-review

  43. Published

    Influence of the curing degree on modulus, glass transition temperature and fracture energy of two epoxy resins for composites

    Wolfahrt, M., Pilz, G. & Lang, R., 2007.

    Research output: Contribution to conferencePosterResearchpeer-review

  44. Published

    Infrared optical properties of polar ethylene copolymer films for transparent insulation and greenhouse applications

    Oreski, G. & Wallner, G., 2007.

    Research output: Contribution to conferencePosterResearchpeer-review

  45. Published

    In-Plane shear properties of reinforced composites with different fiber volume content

    Pinter, G. & Lang, R., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  46. Published

    IR-Analyse von Gießharzprofilen

    Wallner, G. & Lang, R., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  47. Published

    Konfokalmikroskopische Vermessung einer strukturierten Sonnenschutzfolie

    Wallner, G. & Lang, R., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  48. Published

    Kunststoffe - Neue Möglichkeiten in der Solarthermie

    Wallner, G. & Lang, R., 2007, In: VLK-News. p. 19-21

    Research output: Contribution to journalArticleResearchpeer-review

  49. Published

    Kunststoffkollektoren mit integriertem Überhitzungsschutz

    Resch, K., Hausner, R. & Wallner, G., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  50. Published

    Lifetime and safety assessment of PE pressure pipes based on fracture mechanics fatigue tests

    Pinter, G., Haager, M. & Lang, R., 2007, ANTEC 2007. p. 2921-2925

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  51. Published

    Literaturrecherche zu viskoelastischen Flüssigkeiten für neuartige Dämpfungselemente

    Major, Z. & Lang, R., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review