Chair of Materials Science and Testing of Polymers (210)
Organisational unit: Chair
Research output
- 2008
- Published
Development of fretting fatigue test system
Vezer, S. & Major, Z., 2008.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Development of Methods to Determine the Infrared-Optical Properties of Polymer Films
Oreski, G., Tscharnuter, D. & Wallner, G., 2008, In: Macromolecular Symposia. 265, p. 124-133Research output: Contribution to journal › Article › Research › peer-review
- Published
Dynamisch-mechanische Untersuchungen (DMA) an Thermoplastwerkstoffen
Pilz, G. & Lang, R., 2008Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Dynamisch-mechanische Untersuchungen (DMA) an Thermoplastwerkstoffen - Teil 2
Pilz, G. & Lang, R., 2008Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Entwicklung und Charakterisierung thermotroper Materialien
Resch, K. & Wallner, G., 2008, Entwicklung und Charakterisierung thermotroper Materialien. Montanuniversität Leoben, Institut für Werkstoffkunde und -prüfung der Kunststoffe, p. XIV-1-XIV-11Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Entwicklung von Kunststoffkollektoren mit integriertem Überhitzungsschutz
Wallner, G., Hausner, R., Resch, K. & Schobermayr, H., 2008, Gleisdorf SOLAR 2008, 9. Internationales Symposium für thermische Sonnenenergienutzung. p. 85-90Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Farbmessung an Türscheibenglas
Resch, K. & Wallner, G., 2008Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Flexible clear coats - Effect of curing conditions
Buder-Stroisznigg, M., Wallner, G., Strauß, B., Jandel, L. & Lang, R., 2008.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Fracture analysis of annealed PVDF films
Wallner, G., Major, Z., Maier, G. & Lang, R., 2008, In: Polymer Testing. 27, p. 392-402Research output: Contribution to journal › Article › Research › peer-review
- Published
Kunststoffkollektoren mit integriertem Überhitzungsschutz
Wallner, G., Resch, K. & Hausner, R., 2008Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Mechanical Characterization of Modified Liner Resins HPM052
Pilz, G. & Lang, R., 2008Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Mechanical Characterization of VE- and UP-Laminates
Pilz, G. & Lang, R., 2008Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Mechanische Basischarakterisierung der Epoxidharze M13 und M14 im Trocken- und Feuchtzustand
Pilz, G. & Karpf, R., 2008Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Mechanische Eigenschaften von gepressten PP-Zellstoff-Faservliesen (Serien 08 bis 14)
Pilz, G. & Rausch-Schott, O., 2008Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Micro-Mechanical Modelling of Heterogeneous Polypropylene Compounds
Herbst, H., 2008Research output: Thesis › Doctoral Thesis
- Published
Modeling of an all polymeric flat-plate collector with thermotropic overheating protection
Resch, K., Hausner, R. & Lang, R., 2008, 1st Intern. Congress on Heating, Cooling and Buildings. p. 1-6Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Modellierung von Kunststoffkollektoren mit Überhitzungsschutz
Hausner, R., Resch, K. & Wallner, G., 2008, Modellierung von Kunststoffkollektoren mit Überhitzungsschutz. Montanuniversität Leoben, Institut für Werkstoffkunde und -prüfung der Kunststoffe, p. IV-1-IV-8Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Overheating protection with thermotropic resin systems: Effect of material structure and morphology on light-shielding efficiency
Resch, K., Fischer, J., Weber, A. & Wallner, G., 2008, 1st Intern. Congress on Heating, Cooling and Buildings. p. 1-6Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Poission's ratio of polypropylen in relaxation, creep and monotinic tensile tests
Tscharnuter, D., Jerabek, M. & Major, Z., 2008, Mechanics of time Dependent Materials Conference. p. 1-14Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Polar Ethylene Copolymer Films for Solar Applications - Optical Properties and Aging Behavior
Oreski, G., 2008Research output: Thesis › Doctoral Thesis
- Published
Polymere Funktionswerkstoffe für die Solartechnik: polymerphysikalische Charakterisierung, Modellierung und Anwendungsdemonstration
Wallner, G. M., 2008Research output: Thesis › Habilitation thesis › peer-review
- Published
Polymeric Materials for Solar Thermal Applications - Zwischenbericht
Wallner, G., 2008Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Polymeric Thermotropic Materials for Overheating Protection of Solar Collectors
Resch-Fauster, K., 2008Research output: Thesis › Doctoral Thesis
- Published
Property and performance requirements for thermotropic layers to prevent overheating in an all polymeric flat-plate collector
Wallner, G., Resch, K. & Hausner, R., 2008, In: Solar energy materials and solar cells. 92, p. 614-620Research output: Contribution to journal › Article › Research › peer-review
- Published
Ramanmikroskopische Analyse von Spritzgussteilen
Fischer, J. & Wallner, G., 2008Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Raman spectroscopical investigation of high performance coil coatings
Fischer, J., Wallner, G., Strauß, B. & Jandel, L., 2008, ASPM 2008. p. 52-52Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Ranking of PE pipe materials
Pinter, G. & Lang, R., 2008Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Scanning Electron Microscopy (REM) for UP-Resins with Various Filler Types
Pilz, G. & Lang, R., 2008Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Spectroscopical Investigation of Ski Base Materials
Fischer, J., Wallner, G. & Pieber, A., 2008, In: Macromolecular Symposia. 265, p. 28-36Research output: Contribution to journal › Article › Research › peer-review
- Published
Spectroscopic Investigations of Phase-Separated Thermotropic Layers Based on UV Cured Acrylate Resins
Resch, K., Wallner, G. & Lang, R., 2008, In: Macromolecular Symposia. 265, p. 49-60Research output: Contribution to journal › Article › Research › peer-review
- Published
Structure-property-correlations of flexible model clear coats
Buder-Stroizsnigg, M., Wallner, G., Strauß, B. & Jandel, L., 2008.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Tensile Tests for UP-Resin Distitron 412 V2 with Various Filler Types (dry and wet) - Part II
Pilz, G. & Lang, R., 2008Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
The effect of cure condition on the apparent interlaminar shear strength, the glass transition temperature and the interlaminar fracture toughness for a carbon fiber epoxy laminate
Pinter, G. & Lang, R., 2008Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Thermoanalytical investigation of thermoset samples
Wallner, G. & Lang, R., 2008Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Thermo-mechanische und bruchmechanische Charakterisierung impact-modifizierte Epoxidharze
Pilz, G. & Karpf, R., 2008Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Thermo-mechanische und bruchmechanische Charakterisierung impact-modifizierter Epoxidharze - Zusammenfassender Vergleich
Pilz, G. & Karpf, R., 2008Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Thermotropic materials for overheating protection of solar collectors
Resch, K. & Wallner, G., 2008, 1st Intern. Congress on Heating, Cooling and Buildings. p. 1-6Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Umformbare polymerbeschichtete Bleche - Polymerphysikalische Charakterisierung und Struktur/Eigenschafts-Beziehungen
Buder-Stroißnigg, M., 2008Research output: Thesis › Doctoral Thesis
- Published
Untersuchung des Tempereinflusses auf die Zugeigenschaften von gepressten E/P-Kraftzellstoff-Faservliesen
Pilz, G. & Rausch-Schott, O., 2008Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Zugversuch an einem Composite-Bauteil (IOR flange test)
Pinter, G. & Lang, R., 2008Research output: Book/Report › Commissioned report › Transfer › peer-review
- 2007
- Published
3D-Oberflächenvermessung von strukturierten Aluminiumfolien
Berger, G. & Lang, R., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
A340-500/-600 RTM CHF Subcomponent Tests
Pinter, G. & Lang, R., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Aging behavior of polymeric materials for solar thermal absorber applications
Kahlen, S. & Wallner, G., 2007, Solar Energy and Human Settlement. p. 519-523Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
All Polymeric Flat-Plate Collector - Potential of Thermotropic Layers to Prevent Overheating
Resch, K. & Wallner, G., 2007, Solar Energy and Human Settlement. p. 561-565Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Analog triggered image acquisation for optical measurement under cyclic load conditions
Vezer, S., Steinberger, R. & Major, Z., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Analog triggered image acquisation for optical measurment under cyclic load conditions
Vezer, S., Steinberger, R. & Major, Z., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Analyse des Alterungszustandes von PP-Rohren
Pinter, G. & Lang, R., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Analyse eines Profils
Wallner, G. & Lang, R., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Analyse eines Spritzgussbauteiles
Wallner, G. & Lang, R., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Analyse von Tiefziehmaterialien
Wallner, G. & Lang, R., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Anwendung von neuronalen Netzen für die Materialdatengenerierung am Beispiel von Polyamid
Fuchs, P., 2007, 79 p.Research output: Thesis › Diploma Thesis
- Published
Application of full-field strain and temperature measurement and analysis to polymer testing
Major, Z., Steinberger, R., Feichter, C., Jerabek, M. & Lang, R., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 473-474Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
A test concept for lifetime prediction of polyethylene pressure pipes
Pinter, G., Lang, R. & Haager, M., 2007, In: Monatshefte für Chemie = Chemical monthly. 138, p. 347-355Research output: Contribution to journal › Article › Research › peer-review
- Published
Bestimmung der Druckfestigkeit von CFK-Laminatwerkstoffen
Pilz, G. & Lang, R., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Bestimmung der Kriech- und Zugeigenschaften für einen PTFE-Dichtungswerkstoff
Pilz, G. & Lang, R., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Bestimmung der Längenausdehnung von Eisstockzwischenplatten aus PA6 GF40
Pinter, G. & Lang, R., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Bestimmung der mechanischen Eigenschaften eines faserverstärkten thermoplastischen Hochleistungswerkstoffes
Pinter, G. & Lang, R., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Bestimmung von ausgewählten mechanischen Eigenschaften eines faserverstärkten thermoplastischen Hochleistungswerkstoffes
Pinter, G. & Lang, R., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Bestimmung von GIC-Werten in Anlehnung an pr DIN EN 6033
Pinter, G. & Lang, R., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Bestimmung von GIC-Werten nach DIN EN 6033 - Part A
Pinter, G. & Lang, R., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Bestimmung von ILSS-Werten nach DIN EN ISO 14130
Wolfahrt, M., Pinter, G. & Lang, R., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Characterisation and simulation of the time dependent deformation behaviour of polymer roller
Berer, M. & Major, Z., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Characterisation, modelling and simulation of the impact behavior of foams
Reiter, M., Knotz, C. & Major, Z., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Characterisation of the fatigue behavior of elastomer composites
Kajtna, A., Vezer, S. & Major, Z., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Characterisation of the fatigue behavior of rubber by combined Wöhler on isocyclic analysis
Vezer, S. & Major, Z., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Characterisation of the fatigue failure behavior of elastomer composites
Kajtna, A., Vezer, S. & Major, Z., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Characterisation of the fracture behavior of elastomeres under complex loading conditions
Major, Z., Lederer, K. & Lang, R., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 223-224Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Characterisation of the friction behavior of table tennis rubbers
Major, Z. & Lang, R., 2007, International Table Tennis Federation. p. 123-130Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Characterisation of the magnetorheological behavior of fluids and elastomers
Major, Z. & Filipcsei, G., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Characterisation of thermo-mechanical behavior of elastomers
Major, Z., Feichter, C. & Steinberger, R., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Characterization of non-nanofilled resins M06n and M10n
Pilz, G. & Karpf, R., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Characterization of the Chemical Resistance of Glass Fibre Reinforced Resins for Pipe Applications
Aichinger, J., 2007, 150 p.Research output: Thesis › Diploma Thesis
- Published
Charakterisierung und Simulation des Verformungsverhaltens von Kunststoffrollen aus POM und PEEK
Berer, M., 2007Research output: Thesis › Diploma Thesis
- Published
Charakterisierung von RTM-Laminaten unter Druckbelastung
Lintschinger, M. O. M., 2007Research output: Thesis › Master's Thesis
- Published
Charakterisierung von Schrumpffolien
Wallner, G. & Lang, R., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Compression tests on sandfilled UP-Resins
Pilz, G. & Lang, R., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Cyclic crack growth tests with CRB specimens for the evaluation of the long-term performance of PE pipe grades
Pinter, G., Haager, M., Balika, W. & Lang, R., 2007, In: Polymer Testing. 26, p. 180-188Research output: Contribution to journal › Article › Research › peer-review
- Published
Degradation behavior of polymeric materials for solar thermal applications
Wallner, G., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Degradation mechanisms of ethylene-vinyl-acetate copolymer - new studies including ultra fast cure foils
Bregulla, M., Köhl, M., Lampe, B., Oreski, G., Philipp, D., Wallner, G. & Weiß, K.-A., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Determination of time dependent Poisson's ratio values in monotonic and creep tensile experiments
Steinberger, R., Jerabek, M., Major, Z. & Lang, R., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Development of a compression tool for polymeric materials
Jerabek, M., Steinberger, R. & Major, Z., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 471-472Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
DSC-Analyse eines Spitzenmaterials
Wallner, G. & Lang, R., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Dynamisch-mechanische Charakterisierung (DMA) von Thermoplasten
Pilz, G. & Lang, R., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Einfluss ausgewählter Katalysatoren auf Verarbeitung und Eigenschaften von Polyurethanelastomerschaumstoffen
Zeipper, S., 2007Research output: Thesis › Diploma Thesis
- Published
Einfluss unterschiedlicher RTM-Harze und Fasertypen auf das mechanische Eigenschaftsprofil von NCF-Composites
Kitzmüller, W., 2007Research output: Thesis › Diploma Thesis
- Published
Eingangskontrolle von gefüllten und ungefüllten B-Stage Epoxidharzsystemen
Wamen Nana, E. M., 2007Research output: Thesis › Diploma Thesis
- Published
Experimental determination of fatigue crack growth behavior and surface strain distribution of 'faint waist pure shear' specimens with different crack tip radii
Feichter, C., Major, Z. & Lang, R., 2007, In: Rubber chemistry and technology. 79, p. 712-733Research output: Contribution to journal › Article › Research › peer-review
- Published
Feuchtigkeitseinfluss auf die Zugeigenschaften von gepressten E/P-Kraftzellstoff-Faservliesen
Pilz, G. & Rausch-Schott, O., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Flatwise Tension Test an Aluminiumkernverbunden
Pinter, G. & Lang, R., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Influence of glass bead and talc fillers on the time and temperature dependent tensile behavior of polypropylene compounds
Jerabek, M., Steinberger, R. & Major, Z., 2007, ATEM 2007. p. 0-0Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Influence of nonylphenol-polyglycol-ether environments on the results of the full notch creep test
Pinter, G., Haager, M. & Lang, R. W., 2007, In: Polymer Testing. p. 700-710Research output: Contribution to journal › Article › Research › peer-review
- Published
Influence of the curing degree on modulus, glass transition temperature and fracture energy of two epoxy resins for composites
Wolfahrt, M., Pilz, G. & Lang, R., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Infrared optical properties of polar ethylene copolymer films for transparent insulation and greenhouse applications
Oreski, G. & Wallner, G., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
In-Plane shear properties of reinforced composites with different fiber volume content
Pinter, G. & Lang, R., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
IR-Analyse von Gießharzprofilen
Wallner, G. & Lang, R., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Konfokalmikroskopische Vermessung einer strukturierten Sonnenschutzfolie
Wallner, G. & Lang, R., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Kunststoffe - Neue Möglichkeiten in der Solarthermie
Wallner, G. & Lang, R., 2007, In: VLK-News. p. 19-21Research output: Contribution to journal › Article › Research › peer-review
- Published
Kunststoffkollektoren mit integriertem Überhitzungsschutz
Resch, K., Hausner, R. & Wallner, G., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Lifetime and safety assessment of PE pressure pipes based on fracture mechanics fatigue tests
Pinter, G., Haager, M. & Lang, R., 2007, ANTEC 2007. p. 2921-2925Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Literaturrecherche zu viskoelastischen Flüssigkeiten für neuartige Dämpfungselemente
Major, Z. & Lang, R., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
