Chair of Materials Physics (430)

Organisational unit: Chair

1801 - 1850 out of 1,985Page size: 50

Research output

  1. 2005
  2. Published

    Anisotropic intrinsic and extrinsic stresses in epitaxial wurzitic GaN thin film on γ-LiAlO2 (100)

    Eiper, E., Hofmann, A., Gerlach, J. W., Rauschenbach, B. & Keckes, J., 2005, In: Journal of crystal growth. 284, p. 561-566

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Application of severe plastic deformation to process a W-Cu nanocomposite

    Sabirov, I. & Pippan, R., 2005, Proceedings of 15th International Conference on Composite Materials. Centre for Composite and Smart Materials and Structures, p. 1-6 CD

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    A study of the deformation behavior of lamellar γ-TiAl by numeric modeling

    Schaden, T., Fischer, F. D., Clemens, H., Appel, F., Bartels, A. & Dehm, G., 2005, Materials Research Society Symposium Proceedings 842. Materials Research Society : MRS, p. 6.7.1-6.7.6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Biological and biomimetic formation of inorganic nanoparticles

    Aichmayer, B., 2005

    Research output: Thesis › Doctoral Thesis

  6. Published

    Can pure mode III fatigue loading contribute to crack propagation in metallic materials?

    Pokluda, J. & Pippan, R., 2005, In: Fatigue & fracture of engineering materials & structures : Fatigue and fracture of engineering materials and structures. 28, p. 179-185

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Combined elastic strain and macroscopic stress characterization in polycrystalline Cu thin films

    Eiper, E., Martinschitz, K.-J. & Keckes, J., 2005, In: Powder diffraction. 20, p. 1-5

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Combining Nanoindentation and qBEI for a better understanding bone strength

    Weber, M., Roschger, P., Schöberl, T., Klaushofer, K. & Fratzl, P., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  9. Published

    Comparison of cohesive zone parameters and crack tip sress states between two different specimen types

    Chen, C. R. & Kolednik, O., 2005, In: International Journal of Fracture. 132, p. 135-152

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Crack closure: Mechanisms, explanation and prediction

    Pippan, R. & Motz, C., 2005, Proceedings of ICF XI Turin 2005. Eigenverlag, p. ?-?

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Crack Tip Shielding or Anti-Shielding due to Smooth and Discontinuous Material Inhomogeneities

    Simha, N. K., Predan, J., Kolednik, O., Fischer, F. D. & Shan, G. X., 2005, In: International Journal of Fracture. 135, p. 73-93

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Creep Behaviour and Microstructural Stability of Ti-46Al-9Nb with Different Microstructures

    Bystrzanowski, S., Bartels, A., Clemens, H., Gerling, R., Schimansky, F.-P. & Dehm, G., 2005, Intergrative and Interdisciplinary Aspects of Intermetallics. Materials Research Society : MRS, p. S7.12.1-S7.12.6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Creep Behaviour and Related High Temperature Microstructural Stability of Ti-46Al-9Nb Sheet

    Bystrzanowski, S., Bartels, A., Clemens, H., Gerling, R., Schimansky, F. P., Dehm, G. & Kestler, H., 2005, In: Intermetallics. 13, p. 515-524

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Crystal restoration during severe plastic deformation

    Stüwe, H.-P., 2005, Proceedings of the 3rd International Conference on Nanomaterials by Severe Plastic Deformation. Trans Tech Publications, p. 175-178

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Das Erich-Schmid Institut für Materialwissenschaft (ESI) der Österreichischen Akademie der Wissenschaften

    Dehm, G., 2005, Handbuch der Nanoanalytik. p. 227-229

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  16. Published

    Differences in structural evolution in single- and dual-phase materials during severe plastic deformation

    Pippan, R., Vorhauer, A., Wetscher, F., Faleschini, M., Hafok, M. & Sabirov, I., 2005, Proceedings of the 3rd International Conference on Nanomaterials by Severe Plastic Deformation. Trans Tech Publications, p. 407-412

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Discrete dislocation simulation of nanoindentation: The effect of statistically distributed dislocations

    Kreuzer, H. G. M. & Pippan, R., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 400-401, p. 460-462

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Discrete dislocation simulation of nanoindentation: the influence of obstacles and a limited number of dislocation sources

    Kreuzer, H. G. M. & Pippan, R., 2005, In: Philosophical magazine. 28, p. 3301-3319

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Effect of residual stresses on the fatigue crack propagation in welded joints

    Gubeljak, N., Predan, J., Pippan, R. & Oblak, M., 2005, In: Journal of ASTM international. 2, p. 1-18

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Eigenspannungs-Charakterisierung mittels Röntgendiffraktometrie

    Keckes, J. & Eiper, E., 2005, Handbuch der Nanoanalytik. p. 147-149

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  21. Published

    Equal channel angular pressing of metal matrix composites: Effect on particle distribution and fracture toughness

    Sabirov, I., Kolednik, O., Valiev, R. Z. & Pippan, R., 2005, In: Acta materialia. 53, p. 4919-4930

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Experimental characterization of the deformation in metallic hollow spheres

    Friedl, O., Motz, C., Färber, J., Stoiber, M. & Pippan, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  23. Published

    Experimental investigation of the local deformation behaviour of MMCs

    Unterweger, K. & Kolednik, O., 2005, In: Materials Science Forum . 482, p. 211-214

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Fabrication of a nanostructured W-Cu composite by severe plastic deformation

    Sabirov, I. & Pippan, R., 2005, Proceedings of 16th International PLANSEE Seminar. Plansee AG, p. 291-299

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Fabrication of a W-25%Cu nanocomposite by high pressure torsion

    Sabirov, I., Schöberl, T. & Pippan, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    Fabrication of a W-25%Cu nanocomposite by high pressure torsion

    Sabirov, I., Schöberl, T. & Pippan, R., 2005, Proceedings of the 3rd International Conference on Nanomaterials by Severe Plastic Deformation. Trans Tech Publications, p. 561-566

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Fabrication of a W-Cu nanocomposite by high pressure torsion

    Sabirov, I., Schöberl, T. & Pippan, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    Fatigue crack propagation in cellular metals

    Motz, C., Friedl, O. & Pippan, R., 2005, In: International Journal of Fatigue. 27, p. 1571-1581

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Fokussierte Ionenstrahl-Technik (FIB) in der Mikro- und Nanomechanik

    Motz, C., Kiener, D., Schöberl, T., Pippan, R. & Dehm, G., 2005, Handbuch der Nanoanalytik. p. 162-163

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  30. Published

    Formation of a W-25%Cu nanocomposite during high pressure torsion

    Sabirov, I. & Pippan, R., 2005, In: Scripta materialia. 52, p. 354-357

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Formation of severly deformed surface layers: the effect of strain path

    Wetscher, F., Stock, R. & Pippan, R., 2005, Proceedings of 1st Vienna Conference Micro- and Nano-Technology. Österreichische Tribologische Gesellschaft, p. 357-365

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Fracture toughness investigations of tungsten alloys and severe plastic deformed tungsten alloys

    Faleschini, M., Kiener, D., Knabl, W. & Pippan, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Fracture toughness investigations of tungsten alloys and severe plastic deformed tungsten alloys

    Faleschini, M., Kiener, D., Knabl, W. & Pippan, R., 2005, International PLANSEE Seminar. p. 701-711

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Gefügeentwicklung in unter Druck hochverformten Metallen

    Stüwe, H.-P., 2005, In: Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. 96, p. 249-254

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Hardness Limits of SiC and Si3N4 Ceramic Materials

    Balog, M., Sajgalík, P., Lencés, Z., Hnatko, M. & Keckes, J., 2005, Key engineering materials. Vol. 59. p. 247-251 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  36. Published

    High pressure torsion of rail steels

    Wetscher, F., Tian, B., Stock, R. & Pippan, R., 2005, Proceedings of the 3rd International Conference on Nanomaterials by Severe Plastic Deformation. Trans Tech Publications, p. 455-460

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Hillock Formation and Thermal Stresses in Thin Au Films on Si Substrates

    Sauter, M., Balk, T. J., Dehm, G., Nucci, J. A. & Arzt, E., 2005, Mater. Res. Soc. Symp. Proc..

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Hochtemperatur-Röntgendiffraktion - Spannungen und Deformationen in dünnen Aluminium-Schichten auf Silizium

    Resch, C., Keckes, J., Eiper, E. & Resel, E., 2005, Handbuch der Nanoanalytik. p. 170-172

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  39. Published

    Homogenization of Metal Matrix Composites by high-pressure torsion

    Sabirov, I., Kolednik, O. & Pippan, R., 2005, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 36A, p. 2861-2870

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    HPT-Deformation of copper and nickel single crystals

    Hofak, M., Vorhauer, A., Keckes, J. & Pippan, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. Published

    HPT-Deformation of Copper and Nickel Single Crystals

    Hafok, M., Vorhauer, A., Keckes, J. & Pippan, R., 2005, 3rd International Conference on Nanomaterials by Severe Plastic Deformation. Trans Tech Publications, p. 621-626

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Influence of processing temperature on microstructural and mechanical properties of high alloyed single phase steels subjected to severe plastic deformation

    Vorhauer, A., Kleber, S. & Pippan, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Influences of the nitrogen content on the morphological, chemical and optical properies of pulsed laser deposited silicon nitride thin films

    Lackner, J., Waldhauser, W., Berghauser, R., Ebner, R., Beutl, M., Jakopic, G., Leising, G., Hutter, H., Rosner, M. & Schöberl, T., 2005, In: Surface & coatings technology. 192, p. 225-230

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    In-situ WAXS studies of structural changes in wood foils and in individual wood cells during microtrensile tests

    Keckes, J., Burgert, I., Müller, M., Kölln, K., Hamilton, M., Burghammer, M., Roth, S. V., Stanzl-Tschegg, S. E. & Fratzl, P., 2005, In: Fibre diffraction review. p. 48-51

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Internal Friction of a High-Nb Gamma-TiAl-Based Alloy with Different Microstructures

    Weller, M., Clemens, H., Dehm, G., Haneczok, G., Bystrzanowski, S., Bartels, A., Gerling, R. & Arzt, E., 2005, Intergrative and Interdisciplinary Aspects of Intermetallics. Materials Research Society : MRS, p. S7.13.1-S7.13.6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Lattice-constant and stress measurement in single crystals: a new method

    Ortner, B., 2005, In: Journal of applied crystallography. 38, p. 678-684

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Local and global fracture properties in Metal Matrix Composites

    Sabirov, I. & Kolednik, O., 2005, In: Materials Science Forum . 482, p. 215-218

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Magnetic properties and microstructure of a FeCo ferritic steel after severe plastic deformation

    Vorhauer, A., Rumpf, K., Granitzer, P., Kleber, S., Krenn, H. & Pippan, R., 2005, : Proceedings of the 3rd International Conference on Nanomaterials by Severe Plastic Deformation. Trans Tech Publications, p. 299-304

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Mechanical properties of micro-sized copper bending beams machined by the focused ion beam technique

    Motz, C., Schöberl, T. & Pippan, R., 2005, In: Acta materialia. 53, p. 4269-4279

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Mechanical Properties of the Collagen/Mineral Composite in Bone - Study of Osteoporosis and Osteogenesis Imperfecta by a Combination of Nanoindentation and Quantitative Electron Backscattering

    Weber, M., 2005

    Research output: Thesis › Doctoral Thesis

  51. Published

    Micromechanical evaluation of intergranular crack growth under continuous-casting conditions

    Chimani, C., Shan, G. X., Mörwald, K., Kolednik, O., Böhm, H. J., Duschlbauer, D. & Drabek, T., 2005, Proceedings of the 5th European Continuous Casting Conference. La Revue de Metallurgie, p. ?-?

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...33 34 35 36 37 38 39 40 Next
View graph of relations

Contact information

Jahnstrasse 12/I, 8700 Leoben
  • Main phone number: +43 3842 804 112