Chair of Materials Physics (430)

Organisational unit: Chair

101 - 200 out of 1,985Page size: 100

Research output

  1. 2023
  2. Published

    Nanoscale printed tunable specimen geometry enables high-throughput miniaturized fracture testing

    Jelinek, A., Žák, S., Cordill, M. J., Kiener, D. & Alfreider, M., Oct 2023, In: Materials and Design. 234.2023, October, 17 p., 112329.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    The suitability of common reed (Phragmites australis) for load-bearing structural materials

    Albrecht, K., Neudecker, F., Veigel, S., Bodner, S., Keckes, J. & Gindl-Altmutter, W., Oct 2023, In: Journal of materials science. 58.2023, 39, p. 15411-15420 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. E-pub ahead of print

    Recent advances in nanomechanical and in situ testing techniques: Towards extreme conditions

    Kiener, D., Wurmshuber, M., Alfreider, M., Schaffar, G. J. K. & Maier-Kiener, V., 30 Sept 2023, (E-pub ahead of print) In: Current opinion in solid state & materials science. 27.2023, 6, 25 p., 101108.

    Research output: Contribution to journal › Article › Research › peer-review

  5. E-pub ahead of print

    Mapping strain across Co80Ta7B13 / Co62Ta6B32 glassy interfaces

    Evertz, S., Zalesak, J., Hans, M., Jansen, H. C., Keckes, J., Sheng, H., Eckert, J. & Gammer, C., 15 Sept 2023, (E-pub ahead of print) In: Materials and Design. 234.2023, October, 7 p., 112327.

    Research output: Contribution to journal › Article › Research › peer-review

  6. E-pub ahead of print

    Design of high-strength martensitic steels by novel mixed-metal nanoprecipitates for high toughness and suppressed hydrogen embrittlement

    Moshtaghi, M., Maawad, E., Bendo, A., Krause, A., Todt, J., Keckes, J. & Safyari, M., 14 Sept 2023, (E-pub ahead of print) In: Materials & design. 234.2023, October, 15 p., 112323.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Measurement of residual stresses in surrogate coated nuclear fuel particles using ring-core focussed ion beam digital image correlation

    Leide, A. J., Haynes, T. A., Tzelepi, N., Payne, J., Jordan, M., Knol, S., Vreeling, J. A., Davies, M., Goddard, D. T., Pfeifenberger, M. J., Alfreider, M., Kiener, D. & Liu, D., Sept 2023, In: Nuclear Materials and Energy. 36.2023, September, 101470.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Synergistic enhancement of hydrogen interactions in palladium-gold-silicon metallic glass on multilayered graphene

    Sarac, B., Ivanov, Y. P., Putz, B., Karazehir, T., Mitterer, C., Greer, A. L., Sarac, A. S. & Eckert, J., 16 Aug 2023, In: Journal of Materials Chemistry A. 11, p. 19396-19407

    Research output: Contribution to journal › Article › Research › peer-review

  9. E-pub ahead of print

    Ti40Zr10Cu36Pd14 bulk metallic glass as oral implant material

    Rezvan, A., Sharifikolouei, E., Soprunyuk, V., Schranz, W., Todt, J., Lassnig, A., Gammer, C., Sifferlinger, N. A., Asci, A., Okulov, I., Schlögl, S., Keckes, J., Najmi, Z., Cochis, A., Scalia, A. C., Rimondini, L., Sarac, B. & Eckert, J., 16 Aug 2023, (E-pub ahead of print) In: Materials and Design. 233.2023, 10 p., 112256.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Accepted/In press

    The Influence of Phase Formation on Irradiation Tolerance in a Nanocrystalline TiZrNbHfTa Refractory High-Entropy Alloy

    Moschetti, M., Xu, A., Hohenwarter, A., Wei, T., Davis, J., Short, K., Thorogood, G. J., Kong, C., Couzinié, J.-P., Bhattacharyya, D., Kruzic, J. J. & Gludovatz, B. P., 9 Aug 2023, (Accepted/In press) In: Advanced Engineering Materials. 26.2024, 4, 11 p., 2300863.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Magnetic Properties of a High-Pressure Torsion Deformed Co-Zr Alloy

    Stückler, M., Wurster, S., Alfreider, M., Zawodzki, M., Krenn, H. & Bachmaier, A., 8 Aug 2023, In: Nanomaterials. 13.2023, 16, 10 p., 2280.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Short-range order patterns in Mg66Zn29Ca5 metallic glass: Phase transformations and crystallization kinetics

    Naghdali, S., Shabestari, S. G., Saghafian, H., Ramasamy, P., Spieckermann, F., Chen, Z., Zhang, Z. & Eckert, J., 1 Aug 2023, In: Journal of non-crystalline solids. 613.2023, 1 August, 10 p., 122390.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Toxic element-free Ti-based metallic glass ribbons with precious metal additions

    Yüce, E., Spieckermann, F., Asci, A., Wurster, S., Ramasamy, P., Xi, L., Sarac, B. & Eckert, J., Aug 2023, In: Materials today advances. 19.2023, August, 11 p., 100392.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Intragranular thermal fatigue of Cu thin films: Near-grain boundary hardening, strain localization and voiding

    Hlushko, K., Ziegelwanger, T., Reisinger, M., Todt, J., Meindlhumer, M., Beuer, S., Rommel, M., Greving, I., Flenner, S., Kopecek, J., Keckes, J., Detlefs, C. & Yildirim, C., 1 Jul 2023, In: Acta Materialia. 253.2023, 1 July, 10 p., 118961.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Deformation and fatigue behaviour of additively manufactured Scalmalloy® with bimodal microstructure

    Schimbäck, D., Kaserer, L., Mair, P., Palm, F., Leichtfried, G. J., Pogatscher, S. & Hohenwarter, A., Jul 2023, In: International Journal of Fatigue. 172.2023, July, 14 p., 107592.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Hydrogen Evolution Reaction on Ultra-Smooth Sputtered Nanocrystalline Ni Thin Films in Alkaline Media—From Intrinsic Activity to the Effects of Surface Oxidation

    Neumüller, D., Rafailović, L. D., Jovanović, A. Z., Skorodumova, N. V., Pašti, I. A., Lassnig, A., Grießer, T., Gammer, C. & Eckert, J., Jul 2023, In: Nanomaterials. 13.2023, 14, 18 p., 2085.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Effect of wire-arc directed energy deposition on the microstructural formation and age-hardening response of the Mg-9Al-1Zn (AZ91) alloy

    Graf, G., Spörk-Erdely, P., Maawad, E., Burtscher, M., Kiener, D., Clemens, H. & Klein, T., 30 Jun 2023, In: Journal of magnesium and alloys. 11.2023, 6, p. 1944-1958 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Revealing dynamic-mechanical properties of precipitates in a nanostructured thin film using micromechanical spectroscopy

    Alfreider, M., Meindlhumer, M., Ziegelwanger, T., Daniel, R., Keckes, J. & Kiener, D., 25 Jun 2023, In: MRS Bulletin. 49.2024, 1, p. 49-58 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Manufacturing size effect on the structural and mechanical properties of additively manufactured Ti-6Al-4V microbeams

    Yin, K., Cao, B., Todt, J., Gutmann, F., Tunçay, H. F., Roth, A., Fischer, F., Grübel, N., Pfaff, A., Ganzenmüller, G. C., Keckes, J., Hiermaier, S. & Eberl, C., 20 Jun 2023, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 149.2023, 20 June, p. 18-30 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Precious metal amorphous AgAuSi: Alloy design by swapping gold for silver

    Weniger, L.-M., Gammer, C., Niewczas, M., Cordill, M. J., Spieckermann, F., Djemia, P., Faurie, D., Li, C.-H., Lassnig, A., Terziyska, V., Mitterer, C., Eckert, J. & Glushko, O., 17 Jun 2023, In: Materials and Design. 232.2023, August, 11 p., 112099.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Fatigue life assessment of metal foils in multifunctional composites via combined experiments and simulations

    Trost, C. O. W., Žák, S., Ruderes, K., Hammer, R., Rosc, J., Krivec, T., Schell, N., Gänser, H.-P., Hohenwarter, A. & Cordill, M. J., 15 Jun 2023, In: Composites Part B: Engineering. 259.2023, 15 June, 110715.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Crystal-Orientation-Dependent Oxygen Exchange Kinetics on Mixed Conducting Thin-Film Surfaces Investigated by In Situ Studies

    Siebenhofer, M., Riedl, C., Nenning, A., Raznjevic, S., Fellner, F., Artner, W., Zhang, Z., Rameshan, C., Fleig, J. & Kubicek, M., 13 Jun 2023, In: ACS Applied Energy Materials. 6.2023, 12, p. 6712-6720 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    In situ fragmentation of Al/Al2O3 multilayers on flexible substrates in biaxial tension

    Putz, B., Edwards, T. E. J., Huszar, E., Pethö, L., Kreiml, P., Cordill, M. J., Thiaudière, D., Chiroli, S., Faurie, D., Renault, P.-O. & Michler, J., 12 Jun 2023, In: Materials and Design. 232.2023, August, 15 p., 112081.

    Research output: Contribution to journal › Article › Research › peer-review

  24. E-pub ahead of print

    On the stability of Ti(Mn,Al)2 C14 Laves phase in an intermetallic Ti–42Al–5Mn alloy

    Graf, G., Seyffertitz, M., Spörk-Erdely, P., Clemens, H., Stark, A., Hatzenbichler, L., Holec, D., Burtscher, M., Kiener, D., Li, X. & Liu, K., 11 Jun 2023, (E-pub ahead of print) In: Intermetallics. 161.2023, October, 9 p., 107962.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Delignification and Densification as a Route to Enable the Use of Wheat Straw for Structural Materials

    Neudecker, F., Jakob, M., Bodner, S., Keckes, J., Buerstmayr, H. & Gindl-Altmutter, W., 4 May 2023, In: ACS Sustainable Chemistry and Engineering. 11.2023, 19, p. 7596-7604 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. E-pub ahead of print

    Lower hardness than strength: The auxetic composite microstructure of limpet tooth

    Wurmshuber, M., Wilmers, J., Kim, J., Oh, S. H., Bargmann, S. & Kiener, D., 29 Apr 2023, (E-pub ahead of print) In: Acta biomaterialia. 166.2023, August, p. 447-453 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Effect of pulse-current-based protocols on the lithium dendrite formation and evolution in all-solid-state batteries

    Reisecker, V., Flatscher, F., Porz, L., Fincher, C., Todt, J., Hanghofer, I., Hennige, V., Linares-Moreau, M., Falcaro, P., Ganschow, S., Wenner, S., Chiang, Y. M., Keckes, J., Fleig, J. & Rettenwander, D., 27 Apr 2023, In: Nature Communications. 14.2023, 12 p., 2432.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Local gradients of microstructure and residual stresses in Si device sidewalls separated by laser dicing

    Ziegelwanger, T., Meindlhumer, M., Todt, J., Reisinger, M., Matoy, K. & Keckes, J., 24 Apr 2023.

    Research output: Contribution to conference › Poster › Research

  29. Published

    Microstructure formation and mechanical performance of micro-nanoscale ceramic reinforced aluminum matrix composites manufactured by laser powder bed fusion

    Xi, L., Feng, L., Gu, D., Prashanth, K. G., Kaban, I., Wang, R., Xiong, K., Sarac, B. & Eckert, J., 5 Apr 2023, In: Journal of alloys and compounds. 939.2023, 5 April, 12 p., 168803.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    High-Throughput Micromechanical Testing Enabled by Optimized Direct Laser Writing

    Jelinek, A., Žák, S., Alfreider, M. & Kiener, D., 3 Apr 2023, In: Advanced engineering materials. 25.2023, 7, 10 p., 2200288.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Enhancement of hydrogen storage properties from amorphous Mg85Ni5Y10 alloy

    Zhou, H., Ding, Z., Chen, Y. A., Lan, Z., Guo, S., Spieckermann, F., Zadorozhnyy, V., Tan, J., Pan, F. & Eckert, J., 1 Apr 2023, In: Journal of non-crystalline solids. 605.2023, 1 April, 9 p., 122167.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Decomposition of CrN induced by laser-assisted atom probe tomography

    Waldl, H., Hans, M., Schiester, M., Primetzhofer, D., Burtscher, M., Schalk, N. & Tkadletz, M., Apr 2023, In: Ultramicroscopy. 246.2023, April, 8 p., 113673.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Strength determination for rough substrate-coating interfaces with three-dimensional defect structure

    Klünsner, T., Krobath, M., Konetschnik, R., Tritremmel, C., Maier-Kiener, V., Samardzic, D., Ecker, W., Czettl, C., Mitterer, C. & Kiener, D., Apr 2023, In: International journal of refractory metals & hard materials. 112.2023, April, 10 p., 106149.

    Research output: Contribution to journal › Article › Research › peer-review

  34. E-pub ahead of print

    Small-scale fracture mechanical investigations on grain boundary doped ultrafine-grained tungsten

    Wurmshuber, M., Alfreider, M., Wurster, S., Burtscher, M., Pippan, R. & Kiener, D., 28 Mar 2023, (E-pub ahead of print) In: Acta Materialia. 250.2023, 15 May, 12 p., 118878.

    Research output: Contribution to journal › Article › Research › peer-review

  35. E-pub ahead of print

    Fatigue crack growth behavior of a nanocrystalline low Young's modulus β-type Ti–Nb alloy

    Pillmeier, S., Pippan, R., Eckert, J. & Hohenwarter, A., 4 Mar 2023, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 871.2023, 26 April, 12 p., 144868.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Deformation Induced Structure and Property Changes in a Nanostructured Multiphase CrMnFeCoNi High-Entropy Alloy

    Schuh, B., Issa, I., Müller, T., Kremmer, T., Gammer, C., Pippan, R. & Hohenwarter, A., 2 Mar 2023, In: Nanomaterials. 13.2023, 5, 12 p., 924.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Effect of boron doping on grain boundary cohesion in technically pure molybdenum investigated via meso-scale three-point-bending tests

    Jakob, S., Hohenwarter, A., Lorich, A., Knabl, W., Pippan, R., Clemens, H. & Maier-Kiener, V., 2 Mar 2023, In: International journal of refractory metals & hard materials. 113.2023, June, 4 p., 106173.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    In-situ transmission electron microscopy analysis of the degree of heterogeneities in a metallic glass

    Zhang, N. Z., Sun, K., Şopu, D., Spieckermann, F., Ma, X., Geng, C., Bian, X., Jia, Y., Wang, Q., Wang, G. & Eckert, J., Mar 2023, In: Intermetallics. 154.2023, March, 10 p., 107807.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Novel Structural and Functional Material Properties Enabled by Nanocomposite Design

    Eckert, J. (Editor) & Kiener, D. (Editor), Mar 2023, Multidisciplinary Digital Publishing Institute (MDPI).

    Research output: Book/Report › Book › Research

  40. E-pub ahead of print

    Microstructural influences on fatigue threshold behavior and fracture toughness of an additively manufactured γ-titanium aluminide

    Zeiler, S., Lintner, A., Schloffer, M., Pippan, R. & Hohenwarter, A., 22 Feb 2023, (E-pub ahead of print) In: Intermetallics. 156.2023, May, 9 p., 107852.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Exploring the anneal hardening phenomenon in nanocrystalline Pt-Ru alloys

    Renk, O., Hohenwarter, A., Maier-Kiener, V. & Pippan, R., 15 Feb 2023, In: Journal of alloys and compounds. 935.2023, Part 1, 15 February, 11 p., 168005.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Probing the composition dependence of residual stress distribution in tungsten-titanium nanocrystalline thin films

    Sinojiya, R. J., Paulachan, P., Falah Chamasemani, F., Bodlos, R., Hammer, R., Zalesak, J., Reisinger, M., Scheiber, D., Keckes, J., Romaner, L. & Brunner, R., 15 Feb 2023, In: Communications materials. 2023, 4, 12 p., 11.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Analyse der Prozesskostenzusammensetzung bei der Herstellung additiv gefertigter, metallischer Bauteile in Kleinst- und Kleinserien durch pulverbettbasiertes Laserstrahlschmelzen

    Bodner, S. C., 12 Feb 2023, 103 p.

    Research output: Thesis › Master's Thesis

  44. E-pub ahead of print

    Inverse parameter determination for metal foils in multifunctional composites

    Trost, C. O. W., Krobath, M., Žák, S., Hammer, R., Krivec, T., Gänser, H.-P., Trost, T. W., Hohenwarter, A. & Cordill, M. J., 9 Feb 2023, (E-pub ahead of print) In: Materials and Design. 227.2023, March, 13 p., 111711.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Can Severe Plastic Deformation Tune Nanocrystallization in Fe-Based Metallic Glasses?

    Antoni, M., Spieckermann, F., Plutta, N., Gammer, C., Kapp, M., Ramasamy, P., Polak, C., Pippan, R., Zehetbauer, M. J. & Eckert, J., 1 Feb 2023, In: Materials. 16.2023, 3, 14 p., 1260.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Special Issue “Novel Structural and Functional Material Properties Enabled by Nanocomposite Design”

    Eckert, J. & Kiener, D., 1 Feb 2023, In: Nanomaterials. 13.2023, 3, 3 p., 586.

    Research output: Contribution to journal › Editorial › peer-review

  47. Published

    Enhancing mechanical properties of ultrafine-grained tungsten for fusion applications

    Wurmshuber, M., Doppermann, S., Wurster, S., Jakob, S., Balooch, M., Alfreider, M., Schmuck, K. S., Bodlos, R., Romaner, L., Hosemann, P., Clemens, H., Maier-Kiener, V. & Kiener, D., Feb 2023, In: International journal of refractory metals & hard materials. 111.2023, February, 7 p., 106125.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Novel Approach for Assessing Cyclic Thermomechanical Behavior of Multilayered Structures

    Seligmann, B., Alfreider, M., Wurmshuber, M. & Kiener, D., Feb 2023, In: Advanced engineering materials. 25.2023, 3, 10 p., 2201209.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Reactive interdiffusion of an Al film and a CoCrFeNi high-entropy alloy at elevated temperatures

    Zhang, Z.-Q., Fellner, S., Ketov, S. V., Cordill, M., Sheng, H., Mitterer, C., Song, K., Gammer, C. & Eckert, J., Feb 2023, In: Intermetallics. 153.2023, February, p. 1-11 11 p., 107797.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Investigation of the microstructure of a graded ZrN/Ti0.33Al0.67N multilayer coating using cross-sectional characterization methods

    Frank, F., Tkadletz, M., Saringer, C., Czettl, C., Pohler, M., Burghammer, M., Todt, J., Zalesak, J., Keckes, J. & Schalk, N., 25 Jan 2023, In: Surface & coatings technology. 453.2023, 25 January, 8 p., 129126.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Micro-mechanisms of failure in nano-structured maraging steels characterised through in situ mechanical tests

    Jacob, K., Sahasrabuddhe, H., Hohenwarter, A., Dixit, S. & Jaya, B. N., 8 Jan 2023, In: Nanotechnology. 34.2023, 2, 025703.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Data-mining of in-situ TEM experiments: Towards understanding nanoscale fracture

    Steinberger, D., Issa, I., Strobl, R., Imrich, P. J., Kiener, D. & Sandfeld, S., 5 Jan 2023, In: Computational materials science. 216.2023, 5 January, 9 p., 111830.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Direct Formation of Hard-Magnetic Tetrataenite in Bulk Alloy Castings

    Ivanov, Y. P., Sarac, B., Ketov, S. V., Eckert, J. & Greer, A. L., 4 Jan 2023, In: Advanced science. 10.2023, 1, 8 p., 2204315.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Modeling of Fatigue Crack Growth: Dislocation Models

    Pippan, R. & Hohenwarter, A., 1 Jan 2023, Comprehensive Structural Integrity. Elsevier, p. V4-56-V4-70

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  55. Published

    Influence of Processing Route on the Fracture Resistance of Equal Channel Angular Pressing Deformed Iron

    Hohenwarter, A. & Pippan, R., Jan 2023, In: Advanced engineering materials. 25.2023, 1, 9 p., 2201011.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Additive Manufacturing of Fe-Si Soft Magnets

    Strauss, R., 2023

    Research output: Thesis › Master's Thesis

  57. Published

    Advancing Mechanical Property Characterisation for Metallic Foils using Experiments, Simulations, and Machine Learning

    Trost, C. O. W., 2023

    Research output: Thesis › Doctoral Thesis

  58. Published

    Cross-Sectional Characterization of Functionally Graded Materials

    Bodner, S., 2023, 182 p.

    Research output: Thesis › Doctoral Thesis

  59. Published

    How tight are top seals? Insights from a comprehensive characterization workflow

    Shi, X., Misch, D., Cordill, M., Zak, S., Siedl, W., Sachsenhofer, R. & Kiener, D., 2023, 84th EAGE Annual Conference and Exhibition. p. 232-236 5 p. (84th EAGE Annual Conference and Exhibition; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Impactverhalten und Schadenstoleranz ausgewählter g-TiAl Legierungen

    Lintner, A., 2023

    Research output: Thesis › Doctoral Thesis

  61. Published

    Improving the mechanical properties of metallic glasses through structure and stress engineering: A molecular dynamics simulations study

    Yuan, X., 2023

    Research output: Thesis › Doctoral Thesis

  62. Published

    In-situ thermo-mechanical fatigue of copper metallizations

    Zernatto, G. N., 2023

    Research output: Thesis › Master's Thesis

  63. Published

    Interface adhesion measurement of industrially processed layers on polyimide

    Gutnik, D., 2023

    Research output: Thesis › Master's Thesis

  64. Published

    Microstructural characterization and mechanical properties of nanocomposite AlCrSiN thin films

    Kutlesa, K., 2023

    Research output: Thesis › Master's Thesis

  65. Published

    Microstructural characterization and mechanical properties of nanocomposite AlCrSiN thin films

    Kutlesa, K., Meindlhumer, M. & Keckes, J., 2023.

    Research output: Contribution to conference › Poster › Research

  66. Published

    Microstructure Variation of a Secondary Hardening Tool Steel through Heat Treatments

    Nistelberger, D., 2023

    Research output: Thesis › Master's Thesis

  67. Published

    Realistic structural properties of amorphous SiNx from machine-learning-assisted molecular dynamics

    Nayak, G. K., Prashanth, S., Todt, J., Daniel, R. & Holec, D., 2023.

    Research output: Contribution to conference › Poster › Research

  68. Published

    Reliability of copper-fiber reinforced laminates

    Ruderes, K., 2023

    Research output: Thesis › Master's Thesis

  69. Published

    Simultaneously increasing strength and ductility of nano-crystalline Cu-Zn-alloys made from powderous raw materials

    Holub, G., 2023

    Research output: Thesis › Master's Thesis

  70. Published

    SPD Deformation of Pearlitic, Bainitic and Martensitic Steels

    Kapp, M. W., Hohenwarter, A., Bachmaier, A., Müller, T. & Pippan, R., 2023, In: Materials transactions. 64.2023, 7, p. 1353-1363 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Strain Engineering in Trench Power MOSFETs: Characterization and Optimization of Mechanical and Electrical Transistor Properties

    Karner, S., 2023

    Research output: Thesis › Doctoral Thesis

  72. Published

    Structural and Mechanical Property Investigation of Metallic Glasses

    Rezvan, A., 2023

    Research output: Thesis › Doctoral Thesis

  73. Published

    Synchrotron-Based Characterization of Bulk Metallic Glasses

    Rovira Ferrer, D., 2023

    Research output: Thesis › Master's Thesis

  74. 2022
  75. Published

    Transformation of amorphous passive oxide film on Zr65Cu17.5Ni10Al7.5 metallic glass ribbons

    Sarac, B., Kvaratskheliya, A., Zadorozhnyy, V., Ivanov, Y. P., Klyamkin, S., Xi, L., Berdonosova, E., Kaloshkin, S., Zadorozhnyy, M. & Eckert, J., 25 Dec 2022, In: Journal of alloys and compounds. 929.2022, 25 December, 8 p., 167265.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Advances in multi-scale mechanical characterization

    Mangalampalli, K., Ghosh, P., Volpi, F., Kiener, D. & Useinov, A., 8 Dec 2022, In: Journal of applied physics. 132:2022, 22, 4 p., 220401.

    Research output: Contribution to journal › Editorial › peer-review

  77. Published

    Enhanced mechanical performance of gradient-structured CoCrFeMnNi high-entropy alloys induced by industrial shot-blasting

    Zhang, M. Z., Zhang, K., Song, K., Zou, X. Y., Song, W. D., Li, K. F., Hu, L.-N., Zhang, Z.-Q. & Eckert, J., 7 Dec 2022, In: Rare Metals. 42.2023, March, p. 982-993 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Iron oxide - poly(m-anthranilic acid)-poly(ϵ-caprolactone) electrospun composite nanofibers: fabrication and properties

    Huner, K., Sarac, B., Yüce, E., Rezvan, A., Micusik, M., Omastova, M., Eckert, J. & Sarac, A. S., 2 Dec 2022, In: Molecular Systems Design and Engineering. 8.2023, 3, p. 394-406 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Limpet teeth microstructure unites auxeticity with extreme strength and high stiffness

    Oh, S. H., Kim, J.-K., Liu, Y., Wurmshuber, M., Peng, X.-L., Seo, J., Jeong, J., Wang, Z., Wilmers, J., Soyarslan, C., Kim, J., Kittiwirayanon, B., Jeong, J., Kim, H.-J., Huh, Y. H., Kiener, D., Bargmann, S. & Gao, H., 2 Dec 2022, In: Science Advances. 8.2022, 48, 10 p., eadd4644.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Degradation of regenerated cellulose filaments by hydrogen chloride under aqueous and non-aqueous conditions

    Ungerer, B., Sulaeva, I., Bodner, S., Potthast, A., Keckes, J., Müller, U. & Veigel, S., Dec 2022, In: Carbohydrate polymer technologies and applications. 4.2022, December, 9 p., 100238.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Probing the stability, adhesion strength, and fracture mechanism of Mg/Al2Y interfaces via first-principles calculations

    Zhou, Y., Wang, H., Dong, Q., Tan, J., Chen, X., Jiang, B., Pan, F. & Eckert, J., Dec 2022, In: Materials Today Communications. 33.2022, December, 11 p., 104612.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Shear-band blunting governs superior mechanical properties of shape memory metallic glass composites

    Zhang, L., Yan, T., Şopu, D., Wu, Y., Jiang, B., Du, K., Zhang, H. & Eckert, J., Dec 2022, In: Acta Materialia. 241.2022, December, 12 p., 118422.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Phase Transformation Induced by High Pressure Torsion in the High-Entropy Alloy CrMnFeCoNi

    Chulist, R., Pukenas, A., Chekhonin, P., Hohenwarter, A., Pippan, R., Schell, N. & Skrotzki, W., 25 Nov 2022, In: Materials. 2022, 15, 18 p., 8407.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Graded Inconel-stainless steel multi-material structure by inter- and intralayer variation of metal alloys

    Bodner, S., Hlushko, K., van de Vorst, L. T. G., Meindlhumer, M., Todt, J., Nielsen, M. A., Hooijmans, J. W., Saurwalt, J. J., Mirzaei, S. & Keckes, J., 19 Nov 2022, In: Journal of Materials Research and Technology. 21.2022, November-December, p. 4846-4859 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Publisher Correction: In situ fracture observations of distinct interface types within a fully lamellar intermetallic TiAl alloy (Journal of Materials Research, (2021), 36, 12, (2465-2478), 10.1557/s43578-020-00088-z)

    Burtscher, M., Alfreider, M., Schmuck, K. S., Clemens, H., Mayer, S. & Kiener, D., 14 Nov 2022, In: Journal of Materials Research. 37.2021, p. 3855 1 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  86. E-pub ahead of print

    Effect of cold deformation on the stress corrosion cracking resistance of a high-strength stainless steel

    Truschner, M., Janda, A., Bodner, S. C., Keplinger, A. & Mori, G. K., 6 Nov 2022, (E-pub ahead of print) In: Journal of materials science. 57.2022, November, p. 20447–20461 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Surmounting the thermal processing limits: Patterning TiZrCuPdSn bulk metallic glass even with nanocrystallization

    Cai, F.-F., Sarac, B., Chen, Z., Czibula, C. M., Spieckermann, F. & Eckert, J., 4 Nov 2022, In: Materials today advances. 16.2022, December, 8 p., 100316.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Mechanical performance of doped W–Cu nanocomposites

    Wurmshuber, M., Burtscher, M., Doppermann, S., Bodlos, R., Scheiber, D., Romaner, L. & Kiener, D., 1 Nov 2022, In: Materials Science and Engineering A. 857.2022, 1 November, 12 p., 144102.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Optimal tensile properties of laser powder bed fusion hereditary basket-weave microstructure in additive manufactured Ti6Al4V

    Lu, S., Zhang, Z., Liu, R., Zhou, X., Wang, X., Zhang, B. N., Zhao, X., Eckert, J. & Zhang, Z., Nov 2022, In: Additive Manufacturing. 59.2022, November Part A, 14 p., 103092.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Mechanical Properties and Microstructural Evolution of Ti-25Nb-6Zr Alloy Fabricated by Spark Plasma Sintering at Different Temperatures

    Zhu, Q., Chen, P., Xiao, Q., Li, F., Yi, J., Prashanth, K. G. & Eckert, J., 27 Oct 2022, In: Metals. 12.2022, 11, 13 p., 1824.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Designing lightweight multicomponent magnesium alloys with exceptional strength and high stiffness

    Gu, Z., Zhou, Y., Dong, Q., He, G., Cui, J., Tan, J., Chen, X., Jiang, B., Pan, F. & Eckert, J., 10 Oct 2022, In: Materials Science and Engineering A. 855.2022, 10 October, 10 p., 143901.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Enhancement in strength and thermal stability of selective laser melted Al–12Si by introducing titanium nanoparticles

    Qi, J., Liu, C. Y., Chen, Z. W., Liu, Z. Y., Tian, J. S., Feng, J., Okulov, I. V., Eckert, J. & Wang, P., 10 Oct 2022, In: Materials Science and Engineering A. 855.2022, 10 October, 12 p., 143833.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Accepted/In press

    Experimental and theoretical studies on two-dimensional vanadium carbide hybrid nanomaterials derived from V4AlC3 as excellent catalyst for MgH2

    Lan, Z., Liang, H., Wen, X., Hu, J., Ning, H., Zeng, L., Liu, H., Tan, J., Eckert, J. & Guo, J., 7 Oct 2022, (Accepted/In press) In: Journal of magnesium and alloys. 11.2023, October, p. 3790-3799 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  94. E-pub ahead of print

    Enhanced mechanical properties of Zr65Cu15Ni10Al10bulk metallic glass by simultaneously introducing surface grooves and multiple shear bands

    Yuan, X., Zhang, Z., Gao, Q., Zhou, L., Song, K., Zou, X., Şopu, D., Hu, L., Sun, B. & Eckert, J., 4 Oct 2022, (E-pub ahead of print) In: Journal of Materials Research and Technology. 21.2022, November-December, p. 1490-1506 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Crack path investigations in a pearlitic rail steel after pre-deformation under cyclic Mode-II loading

    Schnalzger, G., Daves, W., Pippan, R., Maierhofer, J. & Hohenwarter, A., Oct 2022, In: Engineering Failure Analysis. 140.2022, October, 14 p., 106567.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Effect of a single overload on the cyclic R-curve behaviour of a γ-TiAl TNM alloy

    Lintner, A., Pippan, R., Schloffer, M. & Hohenwarter, A., Oct 2022, In: International Journal of Fatigue. 163.2022, October, 8 p., 107083.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Hydrogen Storage in Porous Metalhydrid - Polymer Hybride Materials

    Schweiger, L., Spieckermann, F., Kiener, D., Mori, G. K. & Eckert, J., 27 Sept 2022.

    Research output: Contribution to conference › Poster › Research

  98. Published

    Local microstructural evolution and the role of residual stresses in the phase stability of a laser powder bed fused cold-work tool steel

    Platl, J., Bodner, S. C., Harald, L., Turk, C., Nielsen, M.-A., Keckes, J. & Schnitzer, R., 22 Sept 2022, In: Materials characterization. 193.2022, November, 11 p., 112318.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Interface-related deformation phenomena in metallic glass/high entropy nanolaminates

    Xu, Q., Şopu, D., Yuan, X., Kiener, D. & Eckert, J., 15 Sept 2022, In: Acta Materialia. 237.2022, 15 September, 9 p., 118191.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Precipitation-based grain boundary design alters Inter- to Trans-granular Fracture in AlCrN Thin Films

    Meindlhumer, M., Ziegelwanger, T., Zalesak, J., Hans, M., Löfler, L., Spor, S., Jäger, N., Stark, A., Hruby, H., Daniel, R., Holec, D., Schneider, J. M., Mitterer, C. & Keckes, J., 15 Sept 2022, In: Acta materialia. 237.2022, 15 September, 18 p., 118156.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Crack length estimations for small-scale fracture experiments via image processing techniques

    Schmuck, K., Alfreider, M. & Kiener, D., 14 Sept 2022, In: Journal of Materials Research. 37.2022, 17, p. 2848-2861 14 p., 17.

    Research output: Contribution to journal › Article › Research › peer-review

  102. E-pub ahead of print

    Interface mediated deformation and fracture of an elastic–plastic bimaterial system resolved by in situ transmission scanning electron microscopy

    Alfreider, M., Balbus, G., Wang, F., Zechner, J., Gianola, D. S. & Kiener, D., 14 Sept 2022, (E-pub ahead of print) In: Materials and Design. 223.2022, November, 17 p., 111136.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...20 Next
View graph of relations

Contact information

Jahnstrasse 12/I, 8700 Leoben
  • Main phone number: +43 3842 804 112