Chair of Ferrous Metallurgy (220)

Organisational unit: Chair

351 - 400 out of 1,066Page size: 50

Research output

  1. 2018
  2. Published

    Beurteilung der Einflussgrößen auf die Verdüsbarkeit von Metallschmelzen

    Hirtler, M., 2018

    Research output: Thesis › Master's Thesis

  3. Published

    Correlation of evaluation methods of iron ore pellets with their performance in a direct reduction plant

    Schwarz, G., 2018

    Research output: Thesis › Master's Thesis

  4. Published

    Einschlusscharakterisierung über die Prozessstufen des Additive Manufacturing eines PH - Stahls

    Auer, M., 2018

    Research output: Thesis › Master's Thesis

  5. Published

    Energy efficiency in secondary cooling - New generation of air-mist nozzles with reduced air consumption and high cooling efficiency

    Wolff, R., Frick, J., Bernhard, C. & Taferner, M., 2018, AISTech 2018 Proceedings - Iron and Steel Technology Conference and Exposition. Association for Iron and Steel Technology, AISTECH, Vol. 2018-May. p. 145-152 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    H-carbide precipitation behaviour in a C-containing β-solidifying TiAl alloy

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Klein, T., Mayer, S. & Clemens, H., 2018.

    Research output: Contribution to conference › Poster › Research

  7. Published

    Investigation of particle attraction by steel/refractory and steel/gas interfaces and the associated relevance for clogging in casting processes

    Dieguez Salgado, U., 2018

    Research output: Thesis › Doctoral Thesis

  8. Published

    Investigation of the Precipitation Behavior of H-Carbides in a TiAl Alloy containing Carbon by means of in- and ex-situ Characterization

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 10, p. 693-703 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Kornfeinung ausscheidungsverfestigter Hochtemperaturferrite mittels Ce-haltiger Einschlüsse

    Godor, F. R., Mayerhofer, A., Presoly, P., Clemens, H., Mayer, S. & Bernhard, C., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 319-324

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Statistische Auswertung heißriss-relevanter Prozessparameter im schweren Stahlguss

    Berger, M., 2018

    Research output: Thesis › Master's Thesis

  11. Published

    Untersuchung der Beeinflussung des Erstarrungsgefüges von HSS-Werkstoffen

    Stöckl, M., 2018

    Research output: Thesis › Master's Thesis

  12. 2017
  13. Published

    Experimental Investigations on Spray Characteristics of Water-Air Nozzles

    Preuler, L., Bernhard, C., Ilie, S. & Six, J., 21 Dec 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 163.2018, 1, p. 29-36 8 p.

    Research output: Contribution to journal › Article › Research

  14. Published

    TOWARDS CO2 LEAN IRONMAKING – A REASONABLE WAY FOR INDIA´S STEEL INDUSTRY

    Schenk, J., 11 Dec 2017, 3rd nternational Conference on Science and Technology of Ironmaking & Steelmaking. Kanpur, India

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Calculation Model to Quantify the Amount of Carry-Over Slag From Primary Metallurgical Plants

    Schnalzger, G., Bundschuh, P., Rössler, R., Schenk, J. & Viertauer, A., Dec 2017, In: Bulletin. The Journal of Refractory Innovations. 1, Autumn, p. 76 - 81 6 p.

    Research output: Contribution to journal › Article › Research

  16. Published

    On the Formation Potential of Acicular Ferrite Microstructure in Different Steel Grades Focusing on the Influence of Carbon Content

    Loder, D., Mayerhofer, A. & Michelic, S. K., 1 Nov 2017, In: Iron and Steel Technology. 2017, 11, p. 78-85 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Chromium Stability in Steel Slags

    Cheremisina, E. & Schenk, J., Nov 2017, In: Steel research international. 88.2017, 11, 7 p., 1700206.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Modeling Inclusion Formation during Solidification of Steel: A Review

    You, D., Michelic, S. K., Presoly, P., Liu, J. & Bernhard, C., 17 Oct 2017, In: Metals : open access journal . 7.2017, 11, 1 p., 460.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Charakterisierung von azikularferritischen Phasenanteilen in HSLA- Stählen und deren Auswirkung auf die mechanischen Kennwerte bei Kleinstproben

    Mayerhofer, A., Bernhard, C. & Michelic, S. K., 13 Sept 2017, p. 125. 130 p.

    Research output: Contribution to conference › Paper › peer-review

  20. Published

    Experimental Study on the Behavior of TiN and Ti2O3 Inclusions in Contact with CaO-Al2O3-SiO2-MgO Slags

    Michelic, S. K. & Bernhard, C., 8 Aug 2017, In: Scanning. 2017, 15 p., 2326750.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Kein sechswertiges Chrom in Stahlwerksschlacken

    Cheremisina, E. & Schenk, J., Aug 2017, In: Stahl und Eisen. 137, 8, p. 33-34 2 p.

    Research output: Contribution to journal › Letter

  22. Published

    BOCAL PARA A INJEÇÃO DE GÁS CONTENDO OXIGÊNIO EM UM DISPOSITIVO DE FERRO GUSA DOTADO DE UM TUBO DE INSERÇÃO INJETOR

    Stefan, L. (Inventor), Marinko, L.-N. (Inventor), Georg, A. (Inventor), Franz, B. (Inventor), Johannes, L. S. (Inventor), Martin, S. (Inventor), Thomas, S. (Inventor), Bogdan, V. (Inventor), Wieder, K. (Inventor) & Wurm, J. (Inventor), 11 Jul 2017, IPC No. F27D 3/ 16 A I, Patent No. BRPI0922727, Priority date 5 Nov 2009, Priority No. WO2009EP64685

    Research output: Patent

  23. Published

    Further development and validation of IDS by means of selected experiments

    Presoly, P., Bernhard, C., Fuchs, N., Miettinen, J., Louhenkilpi, S. & Laine, J., 27 Jun 2017, Proceedings of 9th ECCC European Continuous Casting Conference - ECCC2017. Vienna: ASMET

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Effect of Scrap Composition on the Thermodynamics and Kinetic Modelling of BOF Converter

    Penz, F. M., Bundschuh, P., Schenk, J., Pastucha, K., Panhofer, H. & Paul, A., 11 Jun 2017, p. 1-10. 10 p.

    Research output: Contribution to conference › Paper › peer-review

  25. Published

    INVESTIGATION OF THE SPECIFIC SURFACE AREA AND PORE STRUCTURE OF BLAST FURNACE SINTERS

    Bhattacharyya, A., Schenk, J., Schaffer, C., Schadler, S. & Schuster, E., Jun 2017, European Steel Technology and Application Days ESTAD 2017: Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    The potential for grain refinement of a super austenitic stainless steel with a cerium grain refiner

    Baumgartner, K., Bernhard, C., Presoly, P., Hafok, M. & Leitner, H., 25 May 2017, ESSC and DUPLEX 2017 - 9th European Stainless Steel Conference - Science and Market and 5th European Duplex Stainless Steel Conference and Exhibition. Associazione Italiana di Metallurgia, Vol. 2017-May.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    The Effect of H2O on the Reactivity and Microstructure of Metallurgical Coke

    Wang, W., Bowen, D., Xu, R., Schenk, J., Wang, J. & Xu, Z., 24 May 2017, In: Steel research international. 88.2017, 8, p. 1-9 9 p., 1700063.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Calculation model to quantify the amount of carry-over slag from primary metallurgical aggregates

    Schnalzger, G., Bundschuh, P., Rössler, R., Schenk, J. & Viertauer, A., 11 May 2017, Proceedings of ISDM Conference 2017. p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    A New Experimental Setup for the Simulation of Surface Crack Formation in the Continuous Casting Process

    Krobath, R. & Bernhard, C., 8 May 2017, p. 1827 - 1837. 11 p.

    Research output: Contribution to conference › Paper › peer-review

  30. Published

    On the Capability of Nonmetallic Inclusions to Act as Nuclei for Acicular Ferrite in Different Steel Grades

    Loder, D., Michelic, S. K., Mayerhofer, A. & Bernhard, C., 4 May 2017, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 48.2017, 4, p. 1992-2006 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    A new method for the experimental simulation of surface crack formation in continuous casting

    Krobath, R., Bernhard, C., Ilie, S., Six, J. & Hahn, S., Apr 2017, In: Metallurgia Italiana. 109.2017, 4, p. 5-13 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Influence of Silicon and Manganese on the Peritectic Range for Steel Alloys

    Presoly, P. & Bernhard, C., Apr 2017, In: Iron and Steel Technology. 14.2017, 4, p. 100-108 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Metallurgical approach for the development of a hot crack-resistant metal-cored wire

    Holly, S., Schnitzer, R., Posch, G., Bruckner, J. & Presoly, P., 2 Mar 2017, In: Welding in the world. 61.2017, May, p. 423-434 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Modeling of manganese sulfide formation during the solidification of steel

    You, D., Michelic, S. K., Wieser, G. & Bernhard, C., Feb 2017, In: Journal of materials science. 52.2017, 3, p. 1797-1812 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Influence of Magnesium Oxide content on kinetics of lime dissolution in steelmaking slags

    Cheremisina, E., Schenk, J., Ludwig, N., Paul, A. & Wimmer, G., 17 Jan 2017, In: ISIJ international. 57.2017, 2, p. 304-313 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Influence of operation parameters on the cooling performance of water-air nozzles

    Preuler, L., Bernhard, C., Ilie, S. & Six, J., 1 Jan 2017, METAL 2017 - 26th International Conference on Metallurgy and Materials, Conference Proceedings. Vol. 2017-January. p. 45-51 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Acicular Ferrite Formation and Its Influencing Factors - A Review

    Loder, D., Michelic, S. K. & Bernhard, C., Jan 2017, In: Journal of Materials Science Research. 6.2017, 1, p. 24-43 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    A holistic approach for the characterization of coke for optimized usage in the blast furnace ironmaking process

    Bhattacharyya, A. & Schenk, J., 2017.

    Research output: Contribution to conference › Paper › peer-review

  39. Published

    Characterization of Coke and Char for Optimized Use in Ironmaking Processes

    Bhattacharyya, A., 2017

    Research output: Thesis › Doctoral Thesis

  40. Published

    Charakterisierung von nichtmetallischen Einschlüssen im System Fe-Ce-Al-O

    Schmid, F., 2017

    Research output: Thesis › Master's Thesis

  41. Published

    Einfluss der Schlackenführung in der Sekundärmetallurgie auf den Reinheitsgrad und das Clogging-Verhalten von ULC-Stählen

    Penz, A., 2017

    Research output: Thesis › Master's Thesis

  42. Published

    Einstellung des Phosphorgehaltes durch gezielte Nachbehandlung am Konverter

    Mairhofer, S. M., 2017

    Research output: Thesis › Master's Thesis

  43. Published

    Entwicklung und Evaluierung eines Pre-Prozessor Modells für LD-Konverter

    Zarl, M. A., 2017

    Research output: Thesis › Master's Thesis

  44. Published

    Kinetic model on manganese sulfide formation during solidification of steel

    You, D., Michelic, S. K., Presoly, P. & Bernhard, C., 2017, 6th Decennial International Conference on Solidification Processing (SP17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Modeling microsegregation and nonmetallic inclusion formation based on thermodynamic databases

    You, D., 2017

    Research output: Thesis › Doctoral Thesis

  46. Published

    Möglichkeiten und Grenzen von Modellen zur Vorhersage der Auslaugbarkeit von Stahlwerksschlacken

    Höllen, D., Neuhold, S., Mudersbach, D., Schüler, S., Sommerauer, H., Griessacher, T., Dijkstra, J., van Zomeren, A., Presoly, P., Schenk, J. & Pomberger, R., 2017, Mineralische Nebenprodukte und Abfälle: Aschen, Schlacken, Stäube und Baurestmassen. Vol. 4. p. 205-222

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    On the Relevance of Microsegregation Models for Process Control in Continuous Casting of Steel

    Bernhard, M. C., Presoly, P., Bernhard, C., Six, J. & Ilie, S., 2017, Conference Proceedings of the 26th Anniversary International Conference on Metallurgy and Materials - Metal 2017. Brno, Czech Republic

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Optimization of Coal Briquettes for Lower Reactivity and Higher Strength under Melter-gasifier Conditions

    Bhattacharyya, A., Heckmann, H., Schenk, J. & Wurm, J., 2017.

    Research output: Contribution to conference › Paper › peer-review

  49. Published

    Selected aspects of inclusion metallurgy in steelmaking

    Michelic, S. K., 2017

    Research output: Thesis › Habilitation thesis › peer-review

  50. Published

    Study of Clogging Deposit Buildup in Al-killed and Ca-Treated High-Sulfur Steels With Focus on the Steel/Refractory Interface

    Dorrer, P., Michelic, S., Klösch, G., Reiter, J., Paul, A. & Bernhard, C., 2017, AISTech 2017 Proceedings. p. 1555 - 1565

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Thermochemical modelling of the FINEX® process to determine the material flow of alkalis, halides and zinc

    Leitner, T., 2017

    Research output: Thesis › Master's Thesis

  52. Published

    Thermodynamische und kinetische Modellierung von LD-Konvertern

    Bundschuh, P., 2017

    Research output: Thesis › Doctoral Thesis

Previous 1...4 5 6 7 8 9 10 11 ...22 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 2201