Chair of Ferrous Metallurgy (220)

Organisational unit: Chair

151 - 200 out of 1,066Page size: 50

Research output

  1. 2022
  2. Published

    Different Approaches to Trace the Source of Non-Metallic Inclusions in Steel

    Thiele, K., Ilie, S., Rössler, R., Walkner, C., Meisel, T. C., Prohaska, T. & Michelic, S. K., Aug 2022, Proceedings ICS 2022, 8th International Congress on Science and Technology of Steelmaking. p. 88-94 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    A New Methodological Approach to the Characterization of Optimal Charging Rates at the Hydrogen Plasma Smelting Reduction Process Part 1: Method

    Zarl, M. A., Ernst, D., Cejka, J. & Schenk, J., 7 Jul 2022, In: Materials. 15.2022, 14, 23 p., 4767.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    A New Methodological Approach on the Characterization of Optimal Charging Rates at the Hydrogen Plasma Smelting Reduction Process Part 2: Results

    Ernst, D., Zarl, M. A., Cejka, J. & Schenk, J., 8 Jun 2022, In: Materials. 15.2022, 12, 22 p., 4065.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Using Iron Ore Ultra-Fines for Hydrogen-Based Fluidized Bed Direct Reduction—A Mathematical Evaluation

    Wolfinger, T., Spreitzer, D. & Schenk, J., 1 Jun 2022, In: Materials. 15.2022, 11, 17 p., 3943.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    70 Years of LD‐Steelmaking—Quo Vadis?

    Cappel, J., Ahrenhold, F., Egger, M. W., Hiebler, H. & Schenk, J., 26 May 2022, In: Metals. 12.2022, 6, 24 p., 912.

    Research output: Contribution to journal › Review article › peer-review

  7. Published

    High temperature thermodynamics of the Fe-C-Mn system; new experimental data for the Fe-C-10 and 20 wt.-% Mn system

    Presoly, P., Hahn, S., Ilie, S. & Bernhard, C., 25 May 2022, E-Book 5th International High Manganese Steel Conference. Linz: ASMET, p. 150-153

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Editorial: Inclusion/Precipitate Engineering and Thermo-Physical Properties in Liquid Steels and Alloys

    Mu, W., Michelic, S. K. & Wang, Q., 12 May 2022, In: Frontiers in Materials. 9.2022, May, 3 p., 922203.

    Research output: Contribution to journal › Editorial › peer-review

  9. Published

    Analysis of Non-Metallic Inclusions by Means of Chemical and Electrolytic Extraction—A Review

    Ramesh Babu, S. & Michelic, S. K., 7 May 2022, In: Materials. 15.2022, 9, 25 p., 3367.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Experimental thermodynamics for improving CALPHAD optimizations at the Chair of Ferrous Metallurgy

    Presoly, P., Bernhard, M. C. & Bernhard, C., May 2022.

    Research output: Contribution to conference › Poster › Research

  11. Published

    Hierarchical nature of hydrogen-based direct reduction of iron oxides

    Ma, Y., Souza Filho, I. R., Bai, Y., Schenk, J., Patisson, F., Beck, A., van Bokhoven, J. A., Willinger, M. G., Li, K., Xie, D., Ponge, D., Zaefferer, S., Gault, B., Mianroodi, J. R. & Raabe, D., May 2022, In: Scripta Materialia. 213.2022, May, 7 p., 114571.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    In-situ investigation on the effect of carbon and phosphorus on γ-Fe grain growth by High-Temperature Laser Scanning Confocal Microscope

    Kern, M., Bernhard, M. C., Presoly, P. & Bernhard, C., May 2022.

    Research output: Contribution to conference › Poster › Research

  13. Published

    Selected metallurgical models for computationally efficient prediction of quality-related issues in continuous slab casting of steel

    Bernhard, M. C., Presoly, P., Hahn, S., Ilie, S. & Bernhard, C., May 2022.

    Research output: Contribution to conference › Poster › Research

  14. Published

    Quantification of Critical Parameters for Prediction of Surface Crack Formation in Continuous Casting

    Krobath, R. & Bernhard, C., 30 Apr 2022, In: Metallurgia Italiana. 113.2022, 4, p. 29-38 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Primary carbide formation in tool steels - potential of selected laboratory methods for the generation of thermodynamic data

    Presoly, P., Gerstl, B., Hahn, S. & Bernhard, C., 27 Apr 2022, E-Book of the 12th Tooling Conference & Exhibition. ASMET, p. 405-415

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Analysis of the Usability of Iron Ore Ultra-Fines for Hydrogen-Based Fluidized Bed Direct Reduction—A Review

    Wolfinger, T., Spreitzer, D. & Schenk, J., 6 Apr 2022, In: Materials. 15.2022, 7, 15 p., 2687.

    Research output: Contribution to journal › Review article › peer-review

  17. Published

    A LOOK BACK ON THE 10TH EUROPEAN CONTINUOUS CASTING CONFERENCE

    Bernhard, C., Apr 2022, In: Metallurgia Italiana. 2022, 4, p. 4-5 2 p.

    Research output: Contribution to journal › Editorial

  18. Published

    A Near-Process 2D Heat-Transfer Model for Continuous Slab Casting of Steel

    Bernhard, M. C., Santos, G., Preuler, L., Taferner, M., Wieser, G., Laschinger, J., Ilie, S. & Bernhard, C., Apr 2022, In: Steel research international. 93.2022, 5, 11 p., 2200089.

    Research output: Contribution to journal › Article › Research › peer-review

  19. E-pub ahead of print

    Surface Morphology and Structural Evolution of Magnetite-Based Iron Ore Fines During the Oxidation

    Zheng, H., Schenk, J., Xu, R., Daghagheleh, O., Spreitzer, D., Wolfinger, T., Yang, D. & Kapelyushin, Y., 23 Mar 2022, (E-pub ahead of print) In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 53.2022, 3, p. 1644-1660 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Image Processing Procedure to Evaluate Inclusion Dissolution in a Slag Observed by High-Temperature Confocal Scanning Laser Microscopy

    Ramesh Babu, S., Preißer, N. & Michelic, S. K., 22 Mar 2022, In: Metals : open access journal . 12.2022, 4, 12 p., 531.

    Research output: Contribution to journal › Article › Research › peer-review

  21. E-pub ahead of print

    Significance of Non-Metallic Inclusions for the Clogging Phenomenon in Continuous Casting of Steel – A Review

    Michelic, S. K. & Bernhard, C., 19 Mar 2022, (E-pub ahead of print) In: Steel research international. 2022, 4, 18 p., 2100776.

    Research output: Contribution to journal › Review article › peer-review

  22. Published

    Investigation on the influence of wood pellets on the reactivity of coke with CO2 and its microstructure properties

    Kieush, L., Schenk, J., Pfeiffer, A., Koveria, A., Rantitsch, G. & Hopfinger, H., 1 Feb 2022, In: Fuel. 309.2022, 1 February, 12 p., 122151.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Metallurgical Coke Production with Biomass Additives: Study of Biocoke Properties for Blast Furnace and Submerged Arc Furnace Purposes

    Bazaluk, O., Kieush, L., Koveria, A., Schenk, J., Pfeiffer, A., Zheng, H. & Lozynskyi, V., 1 Feb 2022, In: Materials. 15.2022, 3, 17 p., 1147.

    Research output: Contribution to journal › Article › Research › peer-review

  24. E-pub ahead of print

    Calcination Condition of Dolomite-Based Materials Influencing Static Dissolution in Synthetic Electric Arc Furnace Slag

    Lesiak, S., Cheremisina, E., Rieger, J., Schenk, J., Firsbach, F., Johnson, W., Chopin, T. & Nispel, M., 12 Jan 2022, (E-pub ahead of print) In: Steel research international. 93.2022, 5, 9 p., 2100675.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    A Comprehensive Review of Characterization Methods for Metallurgical Coke Structures

    Zheng, H., Xu, R., Zhang, J., Daghagheleh, O., Schenk, J., Li, C. & Wang, W., 1 Jan 2022, In: Materials. 15.2022, 1, 24 p., 174.

    Research output: Contribution to journal › Review article › peer-review

  26. Published

    Bewertung des Erweichungs- und Aufschmelzverhaltens von DRI im Hochofen

    Kriebernegg, K., 2022

    Research output: Thesis › Master's Thesis

  27. Published

    Dissolution of Al2O3, MgO●Al2O3, and SiO2 in alkali oxide containing secondary metallurgical slags

    Preißer, N., Cejka, J., Ramesh Babu, S., Klösch, G. & Michelic, S. K., 2022, Proceedings of the Liquid Metal Processing & Casting Conference 2022. Philadelphia, Pennsylvania, USA, p. 87 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Einfluss der Ausscheidungselemente auf die mechanischen und physikalischen Eigenschaften von Maraging-Stählen

    Erber, S. J., 2022

    Research output: Thesis › Master's Thesis

  29. Published

    Einfluss von Anlagenparametern auf den durchschnittlichen Gießpulververbrauch an Brammenstranggießanlagen

    Haas, A., 2022

    Research output: Thesis › Master's Thesis

  30. Published

    Einstellung optimierter umwelt- und bautechnischer Eigenschaften von Elektroofenschlacken während ihrer Entstehung

    Vollprecht, D., Presoly, P., Griessacher, T., Sorger, C., Algermissen, D., Sokol, A., Gronen, L. & Pomberger, R., 2022, Berliner Konferenz Mineralische Nebenprodukte und Abfälle: Aschen, Schlacken, Stäube und Baurestmassen. Vol. 9. p. 316-339

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Evaluation Of Slag Mixture For Desulphurization Of Stainless Steel

    Qasim, I., 2022

    Research output: Thesis › Master's Thesis

  32. Published

    Grundlegende Untersuchungen zur Heißrissbildung in Stahlgusslegierungen

    Winkler, J., 2022

    Research output: Thesis › Master's Thesis

  33. Published

    Hochtemperaturoxidation von Stahl unter wasserdampfhaltigen Atmosphären

    Stelzer, L., 2022

    Research output: Thesis › Master's Thesis

  34. Published

    How to increase scrap recycling

    Häuselmann, M., Rieger, J., Schenk, J., Schnitzer, R., Sakic, A., Michelic, S. K. & Cejka, J., 2022, In: Steel times international. 46.2022, 8*December, p. 34-38 5 p.

    Research output: Contribution to journal › Article › Research

  35. Published

    IoT for clogging and refractory wear detection

    Polatschek, P., 2022

    Research output: Thesis › Master's Thesis

  36. Published

    Lokaler Wärmeübergang in der Kokille einer Brammenstranggießanlage auf Basis von Temperaturmessungen mittels Fiber-Bragg-Gitter

    Laschinger, J., 2022

    Research output: Thesis › Master's Thesis

  37. Published

    Methoden zur Herstellung und Charakterisierung von primären Karbiden in Fe-C-Cr-W-Mo Legierungen

    Gerstl, B., 2022

    Research output: Thesis › Master's Thesis

  38. Published

    On the role of sulfur in solidification processes for steel

    Bernhard, C., Bernhard, M. C. & You, D., 2022, Proceedings of XVI. International Symposium on the Desuphurization of Hot Metal and Steel. Salzburg, Austria

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    The metallurgical requirements to control sulfur in steel with the transformation to climate-neutral steelmaking

    Schenk, J., 2022. 10 p.

    Research output: Contribution to conference › Paper

  40. Published

    Thermodynamische Simulation zur Systemauslegung von zukünftigen HPSR-Anlagen

    Farkas, M., 2022

    Research output: Thesis › Master's Thesis

  41. Published

    Vergleich unterschiedlicher Methoden zur Charakterisierung von nichtmetallischen Einschlüssen in pulvermetallurgisch hergestellten Werkzeugstählen

    Schickbichler, M., 2022

    Research output: Thesis › Master's Thesis

  42. 2021
  43. Published

    Influence of a Prior Oxidation on the Reduction Behavior of Magnetite Iron Ore Ultra-Fines Using Hydrogen

    Wolfinger, T., Spreitzer, D., Zheng, H. & Schenk, J., 21 Dec 2021, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Tracing of Non-metallic Inclusions in Secondary Metallurgy by Means of Rare Earth Elements

    Thiele, K., Ilie, S., Rössler, R., Penz, A. & Michelic, S. K., 8 Dec 2021.

    Research output: Contribution to conference › Presentation › Research

  45. E-pub ahead of print

    The PIOLab: Building global physical input–output tables in a virtual laboratory

    Wieland, H., Lenzen, M., Geschke, A., Fry, J., Wiedenhofer, D., Eisenmenger, N., Schenk, J. & Giljum, S., 18 Nov 2021, (E-pub ahead of print) In: Journal of industrial ecology.

    Research output: Contribution to journal › Article › Research › peer-review

  46. E-pub ahead of print

    Mathematical Modeling of the Early Stage of Clogging of the SEN During Continuous Casting of Ti-ULC Steel

    Barati, H., Wu, M., Michelic, S., Ilie, S., Kharicha, A., Ludwig, A. & Kang, Y. B., 20 Oct 2021, (E-pub ahead of print) In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52.2021, 6, p. 4167-4178 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Quantification of Critical Parameters for Prediction of Surface Crack Formation in Continuous Casting

    Krobath, R. & Bernhard, C., 20 Oct 2021, Proceedings of the 10th European Conference on Continuous Casting. Mailand: Associazione Italiana di Metallurgia, 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Defect monitoring tool for CC strands

    Hahn, S., Kaltseis, R., Ilie, S., Six, J., Stechauner, G., Presoly, P., Krobath, R. & Bernhard, C., 5 Oct 2021, Proceedings of the 9th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking (STEELSIM 2021). 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Bending behavior of zinc-coated hot stamping steels

    Hofer, C., Stadler, M., Kurz, T., Maier-Kiener, V., Mayerhofer, A., Hebesberger, T. & Schnitzer, R., Oct 2021, In: Steel research international. 92, 10, p. 1-9 2100149.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Evaluation of Dissolution Rate and Behavior of MgO Carriers for Primary and Secondary Metallurgical Slags

    Cheremisina, E., Schenk, J., Viertauer, A., Nilica, R. & Roessler, R., Oct 2021, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52, 5, p. 2939-2950 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Investigations on hot tearing in a continuous slab caster: Numerical modelling combined with analysis of plant results

    Bernhard, M. C., Santos, G., Ilie, S., Preuler, L. & Bernhard, C., Oct 2021, Proceedings of the 10th European Conference on Continuous Casting (ECCC 2021). Bari, Italy

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Advanced Inclusion analytics for the detailed characterization of micro and sub-micro multiphase particles

    Michelic, S. K., Mayerhofer, A. & Thiele, K., 13 Sept 2021.

    Research output: Contribution to conference › Presentation › Research

Previous 1 2 3 4 5 6 7 8 ...22 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 2201