Chair of Ferrous Metallurgy (220)

Organisational unit: Chair

851 - 900 out of 1,066Page size: 50

Research output

  1. 2008
  2. Published

    On the Interrelation of Heat Withdrawal and Crack Formation in the Continuous Casting Mould

    Michelic, S., Bernhard, C., Rauter, W. & Sormann, A., 2008, ICASP-2 Second International Conference on Advances in Solidification Processes. ASMET, p. 7-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Reaction Mechanism and Kinetics for Scale Formation during the Reheating Process of Spring Steel

    Anghelina, D., Kienreich, R., Zamberger, S., Kozeschnik, E. & Schneider, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    Reaktionsorte und Abscheidungsmechanismen nichtmetallischer Einschlüsse beim ESU-Verfahren

    Penz, S., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  5. Published

    Representativeness of Automated SEM/EDX Analyses for Inclusion Characterisation

    Penz, S., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  6. Published

    The newly developed In-situ Material Characterization (IMC-) test: installation, start-up and first results

    Tubikanec, A., Chimani, C. & Bernhard, C., 2008, Proceedings of the 6th European Continuous Casting Conference. 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Über den Zusammenhang zwischen Primärstruktur und erstarrungsbedingten Fehlern am Beispiel der Heißrissbildung beim Stranggießen

    Reiter, J., Ilie, S., Pierer, R. & Bernhard, C., 2008, Fortschritte in der Metallographie. p. 185-190

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Why are some peritectic steels susceptible to surface crack formation in continuous slab casting?

    Xia, G., Bernhard, C., Ilie, S. & Fürst, C., 2008, Proceedings of the 6th European Continuous Casting Conference. p. Paper-22

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. 2007
  10. Published

    3D-Simulation der CC2 Stranggießanlage

    Babilli, Z., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    A Contribution to Hot Tearing in the Continuous Casting Process

    Pierer, R., Bernhard, C. & Chimani, C., 2007, In: Revue de métallurgie. p. 72-83

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    A Hot Tearing Criterion for the Continuous Casting Process

    Pierer, R., Michelic, S., Bernhard, C. & Chimani, C., 2007, A Hot Tearing Criterion for the Continuous Casting Process. Steel Institute VDEh, p. 893-900

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Behaviour of Non-Metallic-Inclusions in Maraging Steels During the VIM-VAR Process Route

    Hasenhündl, R., Graf, A., Tanzer, R., Reiter, G., Korp, J. & Schützenhöfer, W., 2007, Proceedings of the 7th International Conference on Clean Steel. OMBKE, p. 418-426

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Bestimmung der kritischen Dehnung der Heißrissbildung an Kohlenstoffstählen

    Pierer, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  15. Published

    Bestimmung der kritischen Dehnung von sauergasbeständigen Stählen

    Reiter, J., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. Published

    Bestimmung von Wärmeüberganskoeffizienten anhand eines in einem Pressstempel aufgezeichneten Temperaturverlaufs

    Michelic, S., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  17. Published

    Bewertungsmethoden der Brammenmittenseigerung zur Steuerung des Stranggießens mit Soft Reduction

    Ilie, S., Presslinger, H., Schiefermüller, A., Pissenberger, A. & Reisinger, P., 2007, In: Berg- und hüttenmännische Monatshefte : BHM. 152, p. 227-231

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Charakterisierung der Primärstruktur und des Reinheitsgrades eines im Vakuumlichtbogenofen umgeschmolzenen Maragingstahls X2 NiCoMo18 9 5

    Graf, A., 2007

    Research output: Thesis › Master's Thesis

  19. Published

    Charakterisierung des Reinheitsgrades eines Kunststoffformenstahles beim Umschmelzen in der DESU-Anlage mit unterschiedlichen Schlackenzusammensetzungen

    Herzer, H. & Korp, J., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Comparison of the Reduction Kinetics of Hematite with CO-rich and H2-rich gases at elevated pressure

    Sturn, J., Weiss, B., Schuster, S., Winter, F. & Schenk, J., 2007, Comparison of the Reduction Kinetics of Hematite with CO-rich and H2-rich gases at elevated pressure. p. 58-63

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Das Roheisen in der Römerzeit

    Presslinger, H., Cech, B. & Walach, G., 2007, In: Res montanarum : Zeitschrift des Montanhistorischen Vereins für Österreich. p. 49-50

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Der mittelalterliche Eisenschmelzplatz auf der Kreuztratte am Hüttenberger Erz

    Cech, B., Presslinger, H. & Walach, G., 2007, In: Res montanarum : Zeitschrift des Montanhistorischen Vereins für Österreich. p. 70-74

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Der Mythos über das Härten von Stahl

    Presslinger, H., 2007, In: Res montanarum : Zeitschrift des Montanhistorischen Vereins für Österreich. p. 60-64

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Determination of the nature of liquid steel - alumina interfacial interactions from sessile drop measurements: cases of Fe-Ti and Fe-P alloys

    Bernhard, C., Karasangabo, A., Presslinger, H. & Reisinger, P., 2007, Proceedings of the Chinese - European Exchange in Duesseldorf. p. 219-232

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Dokumentation und Bewertung der Raffinations-Phase und der Vakuumkohlenstoffdesoxidation im VIDP

    Presoly, P., 2007

    Research output: Thesis › Diploma Thesis

  26. Published

    Dünnbandgießen von Kohlenstoff-Stählen

    Linzer, B., 2007, 211 p.

    Research output: Thesis › Doctoral Thesis

  27. Published

    Einfluss ausgewählter Schlackenkomponenten auf den Energieverbrauch beim Elektroschlacke Umschmelzen (ESU)

    Korp, J., 2007, 260 p.

    Research output: Thesis › Doctoral Thesis

  28. Published

    Einfluss der Gießgeschwindigkeit und des Kohlenstoffgehalts auf den Wärmeübergangskoeffizienten und die Wärmestromdichte in einer Stranggießkokille.

    Babilli, Z., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    Einfluss von Mo und N auf die Benetzungs- und Haftungsvorgänge beim Stranggießen von Stahl

    Karasangabo, A., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. Published

    Einfluss von Spurenelementen auf die Heißrissbildung beim Stranggießen von Stahl

    Brombauer, M., Reiter, J. & Pierer, R., 2007, Proceedings des 14. Internationalen Studententags der Metallurgie. p. 22-27

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Electrical Conductivity of New MgO Containing ESR Slags and its Effect on Energy Consumption

    Korp, J., Schneider, R., Hasenhündl, R. & Presoly, P., 2007, Proceedings of the 16th Steelmaking Conference. p. 333-342

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Entwicklung des LD-Verfahrens

    Hiebler, H., 2007, Naturwissenschaften, Medizin und Technik aus Graz. p. 283-297

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  33. Published

    Erstellung eines numerischen Modells der CC2 - Teil I

    Michelic, S., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Evaluierung der HydroVAS - Messung und Implementierung als Standard - Messsystem im Elektrostahlwerk der Böhler Edelstahl GmbH

    Zettl, K. M., 2007, 129 p.

    Research output: Thesis › Master's Thesis

  35. Published

    Examination of the Development of Non-metallic Inclusions Depending on Deoxidation and Solidification Procedures in Certain Steels

    Wiener, J. & Gigacher, G., 2007, Conference Proceedings of the 7th International Conference on Clean Steel. OMBKE, p. 68-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Experimental Simulation of Defect Formation in the Continuous Casting Process

    Bernhard, C., Pierer, R., Tubikanec, A. & Chimani, C., 2007, SMEA Conference on the Effect of Melting, Refining and Casting on Product Quality and Properties. p. Session II-Paper 2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Formulation of a hot tearing criterion for the continuous casting process

    Pierer, R. F., 2007, 168 p.

    Research output: Thesis › Doctoral Thesis

  38. Published

    Heißrissbildungsmodel für das Stranggießen von Stahl und experimentelle Validierung

    Pierer, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  39. Published

    High temperature behaviour of directly reduced iron fines

    Anghelina, D., Brooks, G. A. & Irons, G. A., 2007, In: Canadian metallurgical quarterly. 46, p. 373-378

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Hot Toughness of Continuously Cast Steel Slabs during Reheating

    Yang, B., Degischer, H. P., Xia, G. & Presslinger, H., 2007, In: Steel research international. 78, p. 482-491

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Hydrogen Plasma Smelting Reduction of Iron Oxide and its Process Up-scaling

    Badr, K., Bäck, E. & Krieger, W., 2007, Forum für Metallurgie und Werkstofftechnik 2007. p. 23-24

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Hydrogen Plasma Smelting Reduction SWOT Analysis

    Badr, K., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Improvement of the Characterisation of Nonmetallic Inclusions Especially Focusing on High Purity Steels for Aeronautic Applications

    Penz, S. K., 2007, 103 p.

    Research output: Thesis › Master's Thesis

  44. Published

    Influence of Electromagnetic Stirring on the Amount of Equiaxed Solidification during Continuous Casting

    Michelic, S., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  45. Published

    Jahresbericht zum KnetMET Projekt "Neue Methoden zur Bewertung der Innenqualität von stranggegossenen High-Tech-Stahlgüten und deren mögliche Herstellrouten"

    Wiener, J., Linzbacher, S. & Krieger, W., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  46. Published

    Kinetics of scale formation, scale removal and surface decarburization of steels, Report 1, 2007

    Anghelina, D. & Schneider, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    Kinetics of scale formation, scale removal and surface decarburization of steels, Report 2, 2007

    Anghelina, D. & Schneider, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    Kinetics of scale formation, scale removal and surface decarburization of steels, Report 3, 2007

    Anghelina, D. & Schneider, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Metallografische Beurteilung einer römerzeitlichen Roheisenprobe aus Wörschach

    Presslinger, H., 2007, In: Schild von Steier. 20, p. 313-315

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Metallurgische Untersuchung von Laserauftragsschweißungen

    Hammer, M., Schneeberger, G., Steinlechner, S., Ernst, G. & Korp, J., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Norischer Stahl - Beurteilungsergebnisse römerzeitlicher Funde vom Magdalensberg in Kärnten

    Presslinger, H., Urban, O. H. & Ruprechtsberger, E. M., 2007, In: Res montanarum : Zeitschrift des Montanhistorischen Vereins für Österreich. p. 51-54

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Numeric Modelling of the Heat Transfer in the Continuous Casting Mould

    Michelic, S., Bernhard, C. & Pierer, R., 2007, Numeric Modelling of the Heat Transfer in the Continuous Casting Mould. p. 209-215

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...14 15 16 17 18 19 20 21 22 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 2201