Chair of Chemistry of Polymeric Materials (231)

Organisational unit: Chair

601 - 700 out of 1,029Page size: 100

Research output

  1. 2015
  2. Published

    Entwicklung funktioneller Polymerblends mit maßgeschneiderten Barriereeigenschaften

    Schmidt, M., 2015

    Research output: Thesis › Master's Thesis

  3. Published

    Epoxy-anhydride based thermosets reinforced by surface modified inorganic nanoparticles: Effects on cure kinetics, thermal and thermo-mechanical properties

    Wanner, A. J., Moser, A., Brasch, M., Porubsky, T., Feuchter, M., Pinter, G. & Kern, W., 2015.

    Research output: Contribution to conference › Presentation › Research

  4. Published

    Epoxy anhydride based therosets reinforced by surface modified inorganic nanoparticles: effects on cure kinetics, thermal and thermo-mechanical properties

    Wanner, A. J., Moser, A., Brasch, M., Porubsky, T., Feuchter, M., Pinter, G. & Kern, W., 2015, PPS2015 - Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Exploring thiol-based chemistry for photopolymerizable inkjet inks and for advanced surface functionalization

    Mostegel, F., 2015

    Research output: Thesis › Doctoral Thesis

  6. Published

    Flexible Epoxy-Based Composites with Enhanced Delamination Resistance

    Schlögl, S., Lenko, D., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W. & Kern, W., 2015.

    Research output: Contribution to conference › Presentation › Research

  7. Published

    Flexible Epoxy-Based Composites with Enhanced Delamination Resistance

    Lenko, D., Schlögl, S., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W. & Kern, W., 2015, In: Polymer Composites. 36, p. 2238-2247

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Grafting of vinyl phosphoric acid monomers for the crosslinking of polypropylene

    Mattausch, H., Spörk, M., Rieß, G. & Holzer, C., 2015.

    Research output: Contribution to conference › Poster › Research

  9. Published

    Grafting of vinyl phosphoric acid monomers for the crosslinking of polypropylene

    Mattausch, H., Spörk, M., Rieß, G. & Holzer, C., 2015, PPS Graz - Konferenzbeitrag.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    High voltage insulations with enhanced delamination resistance

    Schlögl, S. & Lenko, D., 2015, In: Rubber, fibres, plastics international. p. 260-262 4.

    Research output: Contribution to journal › Article › Research

  11. Published

    Hochspannungsisolation mit verbesserter Delaminationsbeständigkeit

    Schlögl, S. & Lenko, D., 2015, In: GAK : Gummi, Fasern, Kunststoffe. p. 108-110 2.

    Research output: Contribution to journal › Article › Research

  12. Published

    Investigation of the Rubber-Brass Adhesion Layer Using the Olefin-Metathesis Method

    Leimgruber, S., Kern, W., Hochenauer, R., M., M., Holzner, A. & Trimmel, G., 2015, In: Rubber chemistry and technology. 88, p. 219-233

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Investigations on the flame retardant and crosslinking properties of polypropylene compounds grafted with nitrogen and phosphorus containing monomers

    Spörk, M., 2015

    Research output: Thesis › Master's Thesis

  14. Published

    Irreversible and reversible crosslinking of carboxylated acrylonitrile butadiene rubber

    Fleischmann, D. D., 2015

    Research output: Thesis › Master's Thesis

  15. Published

    Low Migration Photoinitiators for Thiol-ene and Water Based Systems

    Roth, M., 2015

    Research output: Thesis › Doctoral Thesis

  16. Published

    Marine, Waterborne, and Water-Resistant Polymers: Chemistry and Applications

    Fink, J., 2015, Burlington, MA: Elsevier.

    Research output: Book/Report › Book › Research

  17. Published

    (Nano)Composite mit hoher Wärmeleitfähigkeit

    Wanner, A. J., Moser, A., Feuchter, M. & Kern, W., 2015.

    Research output: Contribution to conference › Presentation › Research

  18. Published

    New strategies towards reversible and mendable epoxy based materials employing [4πs+4πs] photocycloaddition and thermal cycloreversion of pendant anthracene groups

    Radl, S., Kreimer, M., Grießer, T., Oesterreicher, A., Moser, A., Kern, W. & Schlögl, S., 2015, In: Polymer. p. 76-87 80.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Olefin-Metathesis Method: A useful Fool for the Investigation of Rubber-Brass Adhesion Interfaces

    Leimgruber, S., Kern, W., Hochenauer, R., Holzner, A. & Trimmel, G., 2015.

    Research output: Contribution to conference › Poster › Research

  20. Published

    Olefin-Metathesis Method: A valuable Tool for the Investigation of Rubber-Metal Adhesion Interfaces

    Leimgruber, S., Kern, W., Hochenauer, R., Holzner, A. & Trimmel, G., 2015.

    Research output: Contribution to conference › Poster › Research

  21. Published

    Olefin-Metathesis Method h A practical Tool for the Investigation of Elastomer-Metal Adhesion Interfaces

    Leimgruber, S., Kern, W., Hochenauer, R., Holzner, A. & Trimmel, G., 2015.

    Research output: Contribution to conference › Presentation › Research

  22. Published

    Photochemical Patterning of Green Fluorescent Protein on Molecular Layers

    Mostegel, F., Ducker, R. E., Rieger, P., El Zubir, O., Xia, S., Radl, S., Edler, M., Cartron, M. L., Leggett, G. J. & Grießer, T., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  23. Published

    Photo-patterned natural rubber surfaces with tunable tribological properties

    Manhart, J., Lenko, D., Mühlbacher, I., Hausberger, A., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 2015, In: European polymer journal. p. 236-246

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Radical induced Cationic Frontal Polymerization

    D., B., P., K., Kern, W. & Liska, R., 2015.

    Research output: Contribution to conference › Presentation › Research

  25. Published

    Schaltbare intelligente Polymere für Selbstheilungs- und Recyclingstrategien

    Radl, S., 2015

    Research output: Thesis › Doctoral Thesis

  26. Published

    Strategies for the surface functionalization of (nano)-particles and their application in (nano)-composites

    Kern, W., Wanner, A. J., Rieß, G., Andraschek, N., Brasch, M., Moser, A., Bergmann, I., Ladstätter, W., Stecher, H., Zenz, C., Wallner, A., Fischer, K. & Ochs, C., 2015.

    Research output: Contribution to conference › Presentation › Research

  27. Published

    The influence of nanoscale particles on the mechanical, thermal and thermo-mechanical properties of anhydride based epoxy systems

    Feuchter, M., Moser, A., Wanner, A. J., Kern, W. & Pinter, G., 2015, EPF 2015 - Book of abstracts. p. 163 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Thermo-mechanical and dielectric properties of epoxy nanocomposites containing inorganic nanoparticles

    Kern, W., Wanner, A. J., Moser, A., Tsekmes, I. A., Kochetov, R. & Smit, J. J., 2015.

    Research output: Contribution to conference › Poster › Research

  29. Published

    UV-Induced Modulation of Tribological Characteristics: Elastomeric Materials Featuring Controlles Anisotropic Friction Properties

    Manhart, J., Hausberger, A., Mühlbacher, I., Lenko, D., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 2015.

    Research output: Contribution to conference › Presentation › Research

  30. Published

    Versatile thiol-based reactions for micrometer- and nanometer-scale photopatterning of polymers and biomolecules

    Mostegel, F., Ducker, R. E., Rieger, P., El Zubir, O., Xia, S., Radl, S. V., Edler, M., Cartron, M. L., Hunter, C. N., Leggett, G. J. & Grießer, T., 2015, In: Journal of Materials Chemistry B. 3, 21, p. 4431–4438

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Water-Based Chemicals and Technology for Drilling, Completion, and Workover Fluids

    Fink, J., 2015, Burlington, MA: Elsevier.

    Research output: Book/Report › Book › Research

  32. 2014
  33. Published

    Photolithographic patterning of cellulose: a versatile dual-tone photoresist for advanced applications

    Wolfberger, A., Petritz, A., Fian, A., Herka, J., Schmidt, V., Stadlober, B., Kargl, R., Spirk, S. & Grießer, T., 16 Oct 2014, In: Cellulose. Volume 22, Issue 1, p. 717-727 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Mehrdimensional photostrukturierte Substrate auf der Grundlage von Monosaccharidderivaten, deren Oligomere und deren Polymere, und Herstellungsverfahren dafür

    Stana Kleinschek, K. (Inventor), Spirk, S. (Inventor), Griesser, T. (Inventor), Kern, W. (Inventor), Kargl, R. (Inventor) & Ribitsch, V. (Inventor), 1 Oct 2014, IPC No. G03F 7/ 039 A I, Patent No. EP2784586, Priority date 27 Mar 2013, Priority No. EP20130002404

    Research output: Patent

  35. Published

    Photoregeneration of Trimethylsilyl Cellulose as a Tool for Microstructuring Ultrathin Cellulose Supports

    Wolfberger, A., Kargl, R., Grießer, T. & Spirk, S., Oct 2014, In: Molecules. 19, 10, p. 16266-16273

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Elastomerprodukt mit kovalent gebundenen Partikel

    Holzner, A. (Inventor), Kern, W. (Inventor), Lenko, D. (Inventor), Manhart, J. C. (Inventor), Schaller, R. (Inventor) & Schloegl, S. (Inventor), 16 Apr 2014, IPC No. C08K 9/ 08 A I, Patent No. EP2719710, Priority date 9 Oct 2012, Priority No. AT20120001087

    Research output: Patent

  37. Published

    Elastomerprodukt mit kovalent gebundenen Partikeln

    Schlögl, S. (Inventor), Lenko, D. (Inventor), Holzner, A. (Inventor), Kern, W. (Inventor), Schaller, R. (Inventor) & Manhart, J. (Inventor), 16 Apr 2014, Patent No. EP20130187847

    Research output: Patent

  38. Published

    Verfahren zur Modifizierung der Oberfläche eines Elastomerproduktes

    Schlögl, S. (Inventor), Holzner, A. (Inventor), Lenko, D. (Inventor), Schaller, R. (Inventor), Manhart, J. (Inventor) & Kern, W. (Inventor), 16 Apr 2014, Patent No. EP20130187837

    Research output: Patent

  39. Published

    3D Optical Waveguides Produced by Two Photon Photopolymerisation of a Flexible Silanol Terminated Polysiloxane Containing Acrylate Functional Groups

    Woods, R., Feldbacher, S., Zidar, D., Langer, G., Satzinger, V., Schmidt, V., Pucher, N., Liska, R. & Kern, W., 1 Mar 2014, In: Optical Materials Express. 4, 3, p. 486-498 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Migrationsarme Photoinitiatoren für Thiol-En / Thiol-In Systeme

    Grießer, T. (Inventor), 1 Jan 2014

    Research output: Patent

  41. Published

    Multidimensionally photopatterned substates on the basis of monosaccaride derivatives, their oligomers and their polymers and a method of production there of

    Grießer, T. (Inventor), 1 Jan 2014

    Research output: Patent

  42. Published

    Resin composition suitable for printing and printing mehtod utilizing the same, Patent application

    Grießer, T. (Inventor), 1 Jan 2014

    Research output: Patent

  43. Published

    Verfahren zur Herstellung eines epoxidbasierten Harzes und damit hergestelltes Harz

    Grießer, T. (Inventor), 1 Jan 2014

    Research output: Patent

  44. Published

    Adjustment of Organic Electronic Device Performance by Means of UV-Light

    Edler, M., Grießer, T., Teichert, C., Zojer, E. & Marchl, M., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  45. Published

    Cellulose based thin films as a platform for drug release studies to minick wound dressing materials

    Maver, T., Maver, U., Mostegel, F., Grießer, T., Spirk, S., Smrke, D. M. & Stana-Kleinschek, K., 2014, In: Cellulose.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Charakterisierung und Evaluierung von Schlüsselparametern für die Herstellung defektfreier Isolationsverbundmaterialien

    Weingrill, H., 2014

    Research output: Thesis › Master's Thesis

  47. Published

    Christian Doppler Laboratory for Functional and Polymer Based Ink-Jet Inks

    Grießer, T. & Edler, M., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. p. 50-54

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Dissolution Testing of Hardly Soluble Materials by Surface Sensitive Techniques: Clotrimazole from an Insoluble Matrix

    Ehmann, H. M. A., Winter, S., Grießer, T., Keimel, R., Schrank, S., Zimmer, A. & Werzer, O., 2014, In: Pharmaceutical Research. p. 2708-2708

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Entanglement Effects in Elastomers: Macroscopic vs Microscopic Properties

    Schlögl, S., Rieß, G., Chassé, W., Saalwächter, K. & Trutschel, M.-L., 2014, In: Macromolecules. 47, p. 2759-2773

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Epoxidharze und anorganische Füllstoffe mit photochemisch steuerbaren Eigenschaften: Neue Strategien für die Herstellung von Verbundwerkstoffen mit verbesserter Rezyklierbarkeit

    Kreimer, M., 2014

    Research output: Thesis › Master's Thesis

  51. Published

    Epoxy-Based Composites with Modified Elastomeric Damping Layers: New Approaches for the Manufacture of High Voltage Insulations with Improved Delamination Resistance

    Manhart, J., Hausberger, A., Mühlbacher, I., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 2014, 22nd Annual International Conference on Composites/Nanoengineering (ICCE-22). p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Evaluation of Selected Characterization Techniques to Determine Failure Mechanisms of Epoxy-Based Composite Materials

    Kreimer, M., Lenko, D., Schlögl, S., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W. & Kern, W., 2014, 33nd Annual International Conference on Composites/Nanoenginering. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Ex situ and In situ Characterization of Patterned Photoreactive Thin Organic Surface Layers Using Friction Force Microscopy

    Shen, Q., Edler, M., Grießer, T., Knall, A.-C., Trimmel, G., Kern, W. & Teichert, C., 2014, In: Scanning. 36, p. 590-598

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Härtung von Composit-Werkstoffen durch strahlungsbasierte Prozesse

    Kern, W., Muhr, N., Rieß, G. & Schauberger, J., 2014, Hocheffiziente Verbundwerkstoffe. p. 115-123

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    High Performance Polymers, 2nd Edition

    Fink, J., 2014

    Research output: Book/Report › Book › Research

  56. Published

    Increase of the Thermal Stability of Polymers based on Renewable Resources

    Laske, S., Ziegler, W. & Holzer, C., 2014, Proceedings of the 30th Annual Meeting of the Polymer Processing Society. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Influence of TiOx and Ti cathode interlayers on the performance and stability of hybrid solar cells

    Dunst, S., Rath, T., Moscher, S., Troi, L., Edler, M., Grießer, T. & Trimmel, G., 2014, In: Solar energy materials and solar cells. 130, p. 217-224

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Maschinenbau, Werkstoffkompetenz und Werkstoffanwendung - Tribologische Aufgabenstellungen

    Grün, F., Galler, R., Prenner, M., Supancic, P., Mitterer, C., Ebner, R., Hausberger, A., Schlögl, S., Buchmayr, B., Godor, I., Leitner, M. & Krampl, H., 2014.

    Research output: Contribution to conference › Presentation › Research

  59. Published

    Nanoparticles bearing a photoreactive shell: interactions with polymer matrices and polymer surfaces

    Kern, W., Muhr, N., Rieß, G. & Schauberger, J., 2014, ESPS 2014. p. IL14-IL14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    New approaches towards the investigation on defects and failure mechanisms of insulating composites used in high voltage applications

    Lenko, D., Schlögl, S., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W., Rosc, J. & Kern, W., 2014, In: Composites Part B: Engineering. 58, p. 83-90

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    New Epoxy-Based Resins and Functional Inorganic Fillers with Tunable Mechanical Properties for the Preparation of Composite Materials with Enhanced Recyclability

    Radl, S. V., Grießer, T., Kreimer, M., Oesterreicher, A., Kern, W. & Schlögl, S., 2014, 22nd Annual International Conference on Composites/Nanoengineering (ICCE-22). p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    Photochemical Patterning of Proteins in Thiol-terminated Monolayers

    Mostegel, F., Rieger, P., Edler, M. & Grießer, T., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  63. Published

    Photo-induced crosslinking and thermal de-crosslinking in polynorbornenes bearing pendant anthracene groups

    Radl, S. V., Roth, M., Gassner, M., Wolfberger, A., Lang, A., Hirschmann, B., Trimmel, G., Kern, W. & Grießer, T., 2014, In: European polymer journal. 52, p. 98-104

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Photo-Induced Polymer Brush Growth on Thiol Terminated Self-Assembled Monolayers

    Mostegel, F., Rieger, P., Edler, M. & Grießer, T., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  65. Published

    Photoreactive Materials for Applications in Organic Electronics

    Wolfberger, A., 2014, 125 p.

    Research output: Thesis › Doctoral Thesis

  66. Published

    Photoreversible Crosslinking of Elastomer Materials

    Manhart, J., Fleischmann, D. D., Ayalur-Karunakaran, S., Grießer, T., Oesterreicher, A., Kern, W. & Schlögl, S., 2014, Photoreversible Crosslinking of Elastomer Materials. p. 60-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Photosensitive polymers for optical devices and organic electronics

    Grießer, T., 2014

    Research output: Thesis › Habilitation thesis › peer-review

  68. Published

    Photo-Vulcanization using thiol-ene chemistry: Film formation, morphology and network characteristics of UV crosslinked rubber latices

    Schlögl, S., Trutschel, M., Chassé, W., Letofsky-Papst, I., Schaller, R., Holzner, A., Rieß, G., Kern, W. & Saalwächter, K., 2014, In: Polymer. 55, p. 5584-5595

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Physical properteis of polyoxymethylene

    Fink, J., 2014, Polyoxymethylene handbook: Structure, properties, applications and its nanocomposites. p. 227-240

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  70. Published

    Polymerization and manufacture of polyoxymethylene

    Fink, J., 2014, Polyoxymethylene handbook: Structure, properties, applications and its nanocomposites. p. 53-106

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  71. Published

    Preparation of PDMS ultrathin films and patterned surface modification with cellulose

    Bracic, M., Mohan, T., Kargl, R., Grießer, T., Doliska, A., Ribitsch, V., Stana-Kleinschek, K. & Fras-Zemljica, L., 2014, In: RSC Advances. 4, 23, p. 11955-11961

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Silica nanoparticles bearing a photoreactive shell: interactions with polymer matrices and polymer surfaces

    Kern, W., Muhr, N., Rieß, G. & Schauberger, J., 2014, Symposium Polymerblends & Nanocomposites: Programme & Kurzreferate. Radusch, H.-J. (ed.). Halle (Saale), p. 31-31

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Silika-Nanopartikel in Glas-Glimmer Verbundwerkstoffen

    Wanner, A. J., Moser, A., Reichmann, A., Wewerka, K., Feuchter, M., Pinter, G. & Kern, W., 2014, Leobener Kunststoff-Kolloquium. p. 201-206

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Smart composite materials bearing photoswitchable crosslinks

    Radl, S. V., Grießer, T., Kreimer, M., Oesterreicher, A., Kern, W. & Schlögl, S., 2014, 3rd European Symposium of Photopolymer Science. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Structured and Functional Elastomer-Based Composites with Tailored Friction Properties

    Manhart, J., Hausberger, A., Mühlbacher, I., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 2014, 22nd Annual International Conference of Composites/Nanoengineering (ICCE-22). p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Synthesis, characterization, and properties of isocyanate-free urethane coatings from renewable resources

    Aust, N., 2014, In: Journal of Coatings Technology and Research. 11, p. 329-339

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    The Chemistry of Bio-based Polymers

    Fink, J., 2014

    Research output: Book/Report › Book › Research

  78. Published

    UV assisted microcellular foaming - A new approach towards the formation of 3D structures in offset printing techniques

    Schlögl, S., Reischl, M., Ribitsch, V. & Kern, W., 2014, UV assisted microcellular foaming - A new approach towards the formation of 3D structures in offset printing techniques. p. 50-50

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    UV-crosslinking of poly(vinyl alcohol) using cation exchanged montmorillonite

    Rieß, G., Schauberger, J. & Kern, W., 2014, 15. Problemseminar Polymerblends und Nanocomposites. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. 2013
  81. Published

    Photoinitiator

    Roth, M. (Inventor), Mostegel, F. (Inventor), Grießer, T. (Inventor), Edler, M. (Inventor), Oesterreicher, A. (Inventor), Gassner, M. (Inventor) & Billiani, J. (Inventor), 9 Sept 2013

    Research output: Patent

  82. Published

    Wavelength selective refractive index modulation in a ROMP derived polymer bearing phenyl- and ortho-nitrobenzyl ester groups

    Edler, M., Mayrbrugger, S., Fian, A., Trimmel, G., Radl, S., Kern, W. & Griesser, T., 7 Jul 2013, In: Journal of Materials Chemistry C. 1, 25, p. 3931-3938 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Accelerator free crosslinking of XNBR-latex using UV techniques

    Lenko, D., Schlögl, S., Schaller, R., Holzner, A. & Kern, W., 2013, Conference Proceedings: Latex and Synthetic Polymer Dispersions 2013.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Advanced characterization techniques to determine tribological end properties of elastomeric products in contract with human skin forgoing living tissue

    Manhart, J., Lenko, D., Hausberger, A., Schloegl, S., Holzner, A., Schaller, R. & Kern, W., 2013, Book of Abstracts. p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    ADVANCED UV-CURABLE RESINS FOR ADHESION APPLICATION

    Kramer, R., Ling, Y., Puchleitner, R., Rieß, G. & Kern, W., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  86. Published

    Alternative methods for the crosslinking of poly(vinyl alcohol) by the use of functionalised inorganic particles - A water-based approach towards environmentally benign coating materials

    Schauberger, J. G., 2013, 219 p.

    Research output: Thesis › Doctoral Thesis

  87. Published

    Anchoring of alkylsilanes and alkylphosphonic dericates on copper surfaces

    Nothdurft, P., Feldbacher, S. & Kern, W., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  88. Published

    Bio-Based Resins and Green Composites from Renewable Resources

    Mahendran, A.-R., 2013, 184 p.

    Research output: Thesis › Doctoral Thesis

  89. Published

    Cellulose as biodegradable high-k dielectric layer in organic complementary inverters

    Petritz, A., Wolfberger, A., Fian, A., Irimia-Vladu, M., Haase, A., Gold, H., Rothländer, T., Grießer, T. & Stadlober, B., 2013, In: Applied physics letters. 103, p. 153303-153303

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Cross-linking of ROMP derived polymers using the two-photon induced thiol-ene reaction: towards the fabrication of 3D-polymer microstructures

    Grießer, T., Wolfberger, A., Daschiel, U., Schmidt, V., Fian, A., Jerrar, A., Teichert, C. & Kern, W., 2013, In: Polymer Chemistry. 4, p. 1708-1714

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Development and characterization of optoelectronic circuit boards produced by two-photon polymerization using a polysiloxane containing acrylate functional groups

    Woods, R., Feldbacher, S., Langer, G., Satzinger, V., Schmid, G., Leeb, W., Kern, W. & Zidar, D., 2013, In: Applied Optics. 52, p. 388-393

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Direct extreme UV-lithographic conversion of metal xanthates into nanostructured metal sulfide layers for hybrid photovoltaics

    Rath, T., Padeste, C., Vockenhuber, M., Fradler, C., Edler, M., Reichmann, A., Letofsky-Papst, I., Hofer, F., Ekinci, Y. & Grießer, T., 2013, In: Journal of materials chemistry. 37, p. 11135-11140

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Dual cross-linking of carboxylated nitrile butadiene rubber latex employing the thiol-ene photoreaction

    Lenko, D., Schloegl, S., Temel, A., Kern, W., Schaller, R. & Holzner, A., 2013, In: Journal of Applied Polymer Science. 129, p. 2735-2743

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Dual crosslinking of carboxylated nitrile butadiene rubber latex employing the thiol-ene photoreaction

    Schlögl, S., Kern, W., Holzner, A., Schaller, R. & Lenko, D., 2013, In: Journal of Applied Polymer Science. 129, p. 2735-2743

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    High performance p-type organic thin film transistors with an intrinsically photopatternable, ultrathin polymer dielectric layer

    Petritz, A., Wolfberger, A., Fian, A., Krenn, J. R., Grießer, T. & Stadlober, B., 2013, In: Organic electronics. 14, p. 3070-3082

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Hydraulic Fracturing Chemicals and Fluids Technology

    Fink, J., 2013

    Research output: Book/Report › Book › Research

  97. Published

    Inhomogeneities and local chain stretching in partially swollen network

    Schlögl, S., Rieß, G., Saalwächter, K. & Chassé, W., 2013, In: Soft Matter. 9, p. 6943-6954

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Inhomogeneities and local chain stretching in partially swollen networks

    Chasse, W., Schlögl, S., Rieß, G. & Saalwächter, K., 2013, In: Soft Matter. 9, p. 6943-6954

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Interactions of a cationic cellulose dervative with an ultrathin cellulose support

    Mohan, T., Zarth, C. S. P., Doliska, A., Kargl, R., Grießer, T., Spirk, S., Heinze, T. & Stana-Kleinschek, K., 2013, In: Carbohydrate Polymers. 92, p. 1046-1053

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Investigation of the Rubber-Brass-Interface ursing the Olefin-Matathesis Method

    Leimgruber, S., Kern, W., Hochenauer, R., Holzner, A. & Trimmel, G., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  101. Published

    Isocyanate Free Urethane Coatings from Renewable Resources

    Mahendran, A. R., Wuzella, G., Aust, N., Kandelbauer, A. & Müller, U., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  102. Published

    Lichtinduzierte Kopplungsreaktionen zwischen Nanopartikeln und Polymeroberflächen

    Muhr, N., 2013

    Research output: Thesis › Doctoral Thesis

  103. Published

    Microcellular foaming with UV light – new strategies for the formation of 3D structures in offset printing techniques

    Schlögl, S., Reischl, M., Ribitsch, V. & Kern, W., 2013, The proceedings of the Austrian - Slovenian Polymer Meeting.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...3 4 5 6 7 8 9 10 11 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/IV, 8700 Leoben
  • Main phone number: +43 3842 402 2301