Chair of Ceramics (320)

Organisational unit: Chair

301 - 400 out of 534Page size: 100

Research output

  1. 2013
  2. Published

    Marangoni Convection as a Contribution to Refractory Corrosion - CFD Simulation and Analytical Approaches

    Vollmann, S. & Harmuth, H., 2013, Marangoni Convection as a Contribution to Refractory Corrosion - CFD Simulation and Analytical Approaches. p. 000781-000786

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Metrology of flocculated systems

    Haider, M., 2013, 69 p.

    Research output: Thesis › Master's Thesis

  4. Published

    Optimization of the method for determination of the single periclase crystal size

    Ye, H., 2013

    Research output: Thesis › Master's Thesis

  5. Published

    Simulation of the steel ladle preheating process

    Drozd-Rys, M., Harmuth, H. & Rössler, R., 2013, Simulation of the steel ladle preheating process. p. 764-769

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Tensile behaviour of magnesia-spinel refractories: Comparison of tensile and wedge splitting tests

    Grasset-Bourdel, R., Alzina, A., Huger, M., Chotard, T., Obenaus-Emler, R., Gruber, D. & Harmuth, H., 2013, In: Journal of the European Ceramic Society. 33, p. 913-923

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Thermochemischer Angriff von Rauchgaskomponenten auf die Feuerfestausmauerung und den Stahlmantel metallurgischer Anlagen

    Rieger, J., Drozd-Rys, M., Weiß, C. & Harmuth, H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 466-467

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Thermomechanical Behaviour of Steel Ladle Linings and the Influence of Insulations

    Gruber, D. & Harmuth, H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 470-471

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    The Role of Turbulence Modelling in Picturing Gas Stirred Steel Ladle Flow

    Doletschek, M., Pirker, S. & Harmuth, H., 2013, The Role of Turbulence Modelling in Picturing Gas Stirred Steel Ladle Flow. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Towards Modelling of Slag Entrainment in Gas Stirred Ladles by LES

    Huang, A., Vollmann, S. & Harmuth, H., 2013, Towards Modelling of Slag Entrainment in Gas Stirred Ladles by LES. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. 2012
  12. Published

    In situ formation of carbon nanotubes and ceramic whiskers in Al2O3-C refractories with addition of Ni-catalyzed phenolic resin

    Luo, M., Li, Y., Sang, S., Zhao, L., Jin, S. & Li, Y., 15 Dec 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 558, p. 533-542

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Microstructure and mechanical properties of MgO-C refractories containing expanded graphite

    Zhu, T., Li, Y., Jin, S., Sang, S., Wang, Q., Zhao, L., Li, Y. & Li, S., 27 Nov 2012, In: Ceramics International : CI. 39.2013, 4, p. 4529-4537 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Microstructural Evolution and Oxidation Resistance of Multi-walled Carbon Nanotubes in the Presence of Silicon Powder at High Temperatures

    Luo, M., Li, Y., Jin, S., Sang, S. & Zhao, L., Jul 2012, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 28, 7, p. 599-605

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Microstructural evolution of multi-walled carbon nanotubes in the presence of mixture of silicon and silica powders at high temperatures

    Li, Y., Luo, M., Jin, S., Sang, S. & Zhao, L., Jul 2012, In: Ceramics International : CI. 38, 5, p. 4105-4110

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Microstructures and mechanical properties of Al2O3-C refractories with addition of multi-walled carbon nanotubes

    Luo, M., Li, Y., Jin, S., Sang, S., Zhao, L. & Li, Y., 30 Jun 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 548, p. 134-141

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Investigation of Calcium Aluminate based Mold Slag Compositions

    Marschall, I., 21 Feb 2012, E-Proceedings of The 11th International Conference on Molten Slags, Fluxes and Salts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    CFD Simulation of Mass Transfer Coefficients Relevant for Refractory Wear

    Vollmann, S. & Harmuth, H., 2012, In: Interceram / Refractories manual. p. 19-21

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Characterisation of refractory failure under combined hydrostatic and shear loading at elevated temperatures

    Dahlem, E., 2012, 58 p.

    Research output: Thesis › Doctoral Thesis

  20. Published

    Charakterisierung des Kristallisationsverhaltens einer Gießschlacke und zugehöriger Schlackenfilme

    Dobrowsky, M., 2012, 53 p.

    Research output: Thesis › Diploma Thesis

  21. Published

    Charakterisierung und Gegenüberstellung des Aufschmelz- und Erstarrungsverhaltens zweier Gießpulver

    Kircher, V., 2012, 71 p.

    Research output: Thesis › Diploma Thesis

  22. Published

    Comparison of High Temperature Methods for the Investigation of Melting and Crystallisation Behaviour of Mould Powders

    Kölbl, N., Marschall, I., Harmuth, H., Buchberger, B. & Reiter, J., 2012, FRAY INTERNATIONAL SYMPOSIUM. p. 381-394

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  23. Published

    Corrosion mechanisms of SEN slagband materials

    Harmuth, H., Kölbl, N., Rollinger, B. & Xia, G., 2012, Proceedings of the 6th international symposium on refractories. p. 477-480

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    For an Educational and Industrial Partnership in a Coopetitive World: FIRE

    Rigaud, M., Zhou, N. & Harmuth, H., 2012, Proceedings of the 6th international symposium on refractories. p. 61-63

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Fractographic and fracture mechanical investigations of refractories under different loading conditions

    Harmuth, H. & Tschegg, E. K., 2012, Proceedings of the 6th international symposium on refractories. p. 485-488

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Influence of Marangoni convection on refractory wear

    Vollmann, S., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    Influence of thermal damage occurrence at microstructural scale on the thermomechanical behaviour of magnesia-spinel refractories

    Grasset-Bourdel, R., Alzina, A., Huger, M., Chotard, T., Gruber, D. & Harmuth, H., 2012, In: Journal of the European Ceramic Society. 32, p. 989-999

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Investigation of continuous casting slag films sampled on site and comparison with laboratory results

    Marschall, I., Kölbl, N., Harmuth, H. & Xia, G., 2012, Ninth International Conference on Molten Slags, Fluxes and Salts (Molten 12). p. 1-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Investigation of MgALON formation under different conditions and refractory application

    Gschiel, S., Harmuth, H., Lences, Z., Sajgalik, P. & Ye, G., 2012, Proceedings of the 6th international symposium on refractories. p. 489-492

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Microstructure of solidified mold slag and comparison with laboratory specimens

    Marschall, I., Kölbl, N., Harmuth, H. & Xia, G., 2012, Fray International Symposium. Vol. 2. p. 213-224

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Preliminary investigations of the production of MgAlON bonded refractories

    Pichlbauer, S., Harmuth, H., Lenčéš, Z. & Šajgalîk, P., 2012, In: Journal of the European Ceramic Society. 32, 9, p. 2013-2018

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Production of MgAlON Bonded Alumina Refractories

    Gschiel, S., Harmuth, H., Lenčéš, Z. & Šajgalîk, P., 2012, In: Interceram / Refractories manual. 1, p. 48-51

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    SIMULATION OF MOULDING – INFLUENCING FACTORS AND RESULTS FOR COLLECTOR NOZZLES

    Gruber, D., Harmuth, H. & Michelitsch, A., 2012, Proceedings of International Colloquium on Refractories . p. 112-115

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Thermomechanical Modelling of a Channel Induction Furnace

    Jin, S., Gruber, D., Harmuth, H., Soudier, J., Meunier, P. & Lemaistre, H., 2012, Proceedings of ALAFAR Congress 2012. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Thermo-Mechanical Modelling of Steel Ladle Process Cycles

    Jin, S., Auer, T., Gruber, D., Harmuth, H., Fréchette, M. H. & Li, Y., 2012, In: Interceram / Refractories manual. p. 37-41

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Thermomechanical Steel Ladle Simulation Including a Mohr-Coulomb Plasticity Failure Model

    Jin, S., Gruber, D., Harmuth, H. & Fréchette, M.-H., 2012, In: RHI bulletin : the journal of refractory innovations. 1, p. 39-43

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Untersuchung von Purzementmörtel in Hinblick auf die Anwendung in der Erdölindustrie

    Moser, L., 2012

    Research output: Thesis › Master's Thesis

  38. Published

    Untersuchung von synthetischen Gießschlacken mit reduzierten SiO2-Gehalten

    Thalhammer, T., 2012

    Research output: Thesis › Master's Thesis

  39. Published

    Zum Gedenken an Felix Trojer

    Harmuth, H., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. 157, p. 459-467

    Research output: Contribution to journal › Article › Research › peer-review

  40. 2011
  41. Published

    Oxidation resistance of multi-walled carbon nanotubes coated with polycarbosilane-derived SiCxOy ceramic

    Luo, M., Li, Y., Jin, S., Sang, S. & Zhao, L., Dec 2011, In: Ceramics International : CI. 37, 8, p. 3055-3062

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Classification of thermomechnical impact factors and prediction model for ladle preheating

    Jin, S., Harmuth, H., Gruber, D., Auer, T. & Li, Y., 2011, In: Journal of Wuhan University of Technology. 34, 1, p. 28-31

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Corrosion Mechanisms of Refractory Materials Used in Secondary Metallurgy

    Melcher, F. & Harmuth, H., 2011, In: Refractories worldforum. 3, p. 99-104

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Corrosive wear of refractories in steel ladles - Part I: Fundamentals

    Harmuth, H., Vollmann, S. & Rössler, R., 2011, Refractories-Technology to Sustain the Global Environment. p. 74-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Corrosive wear of refractories in steel ladles - Part II: Influence of Fluid Flow

    Vollmann, S., Harmuth, H. & Kronthaler, A., 2011, Refractories-Technology to Sustain the Global Environment. p. 75-75

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Evaluation of the Drucker-Prager parameters at elevated temperatures of two refractories

    Dahlem, E., Gruber, D., Auer, T., Harmuth, H., Huger, M. & Chotard, T., 2011, Evaluation of the Drucker-Prager parameters at elevated temperatures of two refractories. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Evaluation of the Drucker-Prager Parameters (Cohesion and Friction Angle) at Elevated Temperature for two Refractories

    Dahlem, E., Gruber, D., Auer, T., Harmuth, H., Huger, M. & Chotard, T., 2011, Refractories-Technology to Sustain the Global Environment. p. 93-93

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Investigation of mold powder crystallization – evaluation and interpretation of measurements from laboratory and production site

    Harmuth, H., Kölbl, N., Marschall, I. & Brandl, W., 2011, Investigation of mold powder crystallization – evaluation and interpretation of measurements from laboratory and production site. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Magnesia refractories with non-oxide components

    Pichlbauer, S., 2011

    Research output: Thesis › Doctoral Thesis

  50. Published

    Melt corrosion of refractories in the nonferrous industry and the electric arc furnace: A thermochemical approach

    Reiter, V. & Harmuth, H., 2011, In: Pure and Applied Chemistry. p. 1093-1104

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Micromechanical modelling of magnesia-spinel refractories: from thermal damage to damaging elastic behaviour

    Grasset-Bourdel, R., Alzina, A., Huger, M., Chotard, T., Gruber, D. & Harmuth, H., 2011, Micromechanical modelling of magnesia-spinel refractories: from thermal damage to damaging elastic behaviour. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Modélisation micro-mécanique de réfractaires magnésie-spinelle: de l'endommagement dû au différentiel de dilatation pendant l'étape de refroidissement au comportement élastique endommageable en traction

    Grasset-Bourdel, R., Alzina, A., Huger, M., Chotard, T., Gruber, D. & Harmuth, H., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  53. Published

    Naturwissenschaftliche Untersuchungsergebnisse an Gebrauchskeramiken vom mittelbronzezeitlichen Arbeits- und Siedlungsplatz Schlosser/KG Schwarzenbach/OG Trieben

    Presslinger, H., Eibner, C. & Harmuth, H., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. p. 28-33

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    New methods for the determination of cohesion and friction angle of refractories at elevated temperatures

    Dahlem, E., Gruber, D., Auer, T., Harmuth, H., Huger, M. & Chotard, T., 2011, In: Interceram. p. 129-134

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Optimisation d'une géométrie d'éprouvette pour l'évaluation à haute température des paramétres de Drucker-Prager sur des matériaux réfractaires

    Dahlem, E., Gruber, D., Auer, T., Harmuth, H., Huger, M. & Chotard, T., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  56. Published

    Optimization of 3D RVE for anisotropy index reduction in modelling thermoelastic properties of two-phase composites using a periodic homogenisation method

    Grasset-Bourdel, R., Alzina, A., Tessier-Doyen, N., Huger, M., Chotard, T., Schmitt, N., Gruber, D. & Harmuth, H., 2011, In: Computational materials science. 50, p. 3136-3144

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Permeabilität von feuerfesten Baustoffen während des Pressvorganges

    Atzenhofer, C., 2011

    Research output: Thesis › Master's Thesis

  58. Published

    Simulation of the Thermomechanical Behaviour of Magnesia-Spinel Refractories

    Grasset-Bourdel, R., Alzina, A., Huger, M., Chotard, T., Gruber, D. & Harmuth, H., 2011, Refractories-Technology to Sustain the Global Environment. p. 111-111

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Single Hot Thermocouple Technique for the Characterization of the Crystallization Behavior of Transparent or Translucent Liquids

    Kölbl, N., Marschall, I. & Harmuth, H., 2011, In: Journal of materials science. 46, p. 6248-6254

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Structure/property relations of magnesia-spinel refractories: experimental determination and simulation

    Grasset-Bourdel, R., 2011

    Research output: Thesis › Doctoral Thesis

  61. Published

    The fracture resistance of refractories

    Bradt, R. C. & Harmuth, H., 2011, In: Refractories worldforum. 3, p. 129-135

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Thermochemical and Fluid-Dynamical Investigations of Refractory Wear by Ladle Slags

    Harmuth, H. & Vollmann, S., 2011, In: Interceram. p. 88-90

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Thermo-mechanical Modeling of a Complete Steel Ladle Process

    Jin, S., Auer, T., Gruber, D., Harmuth, H., Fréchette, M. H. & Li, Y., 2011, Refractories-Technology to Sustain the Global Environment. p. 10-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Thermo-mechanical simulation of a steel ladle process cycle with special emphasis on the preheating process

    Auer, T., Gruber, D., Harmuth, H., Jin, S. & Kronthaler, A., 2011, Refractories for Industrials. p. 39-41

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Untersuchungen an Magnesiaspinellsteinen mittels der Impulse Excitation Technique bei Raumtemperatur und bei hohen Temperaturen

    Mairitsch, E., 2011

    Research output: Thesis › Master's Thesis

  66. 2010
  67. Published

    Microstructures and Properties of Carbon Refractories for Blast Furnaces with SiO2 and Al Additions

    Li, Y., Chen, X., Sang, S., Li, Y., Jin, S., Zhao, L. & Ge, S., Aug 2010, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 41A, 8, p. 2085-2092

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Properties and microstructures of blast furnace carbon refractories with Al additions

    Chen, X., Li, Y., Sang, S., Zhao, L., Jin, S. & Li, S., Aug 2010, In: Ironmaking and steelmaking. 37, 6, p. 398-406

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Effect of Carbon Aggregates on the Properties of Carbon Refractories for a Blast Furnace

    Chen, X., Li, Y., Li, Y., Sang, S., Zhao, L., Li, S., Jin, S. & Ge, S., Apr 2010, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 41, 2, p. 420-429

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Assessment of Alkali Salt Infiltration into Refractories in Cement Rotary Kilns by Means of Process Simulation

    Emler, R., 2010, In: RHI bulletin : the journal of refractory innovations. 1, p. 21-24

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Characterisation of the fracture path in ‘flexible’ refractories

    Harmuth, H., 2010, Refractories: recent developments in materials, production and use : selected papers from the 12th International Ceramics Congress, part of CIMTEC 2010-12th International Ceramics Congress and 5th Forum on New Materials, Montecatini Terme, Italy, June 6 - 11, 2010 ; part I including Symposium CL . p. 30-36 (Advances in science and technology; vol. 70).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Comparison of the slag rim formation of two different mould powders

    Marschall, I., Kölbl, N. & Harmuth, H., 2010, Proceedings of the International Conference on Materials Science & Technology (MS&T'10) . p. 1591-1600

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Computational fluid dynamics simulations of mass transfer coefficients in gas purged steel ladles.

    Vollmann, S. & Harmuth, H., 2010, Computational fluid dynamics simulations of mass transfer coefficients in gas purged steel ladles.. p. 441-451

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Corrosive mass transfer in steel ladles.

    Vollmann, S. & Harmuth, H., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  75. Published

    Der Verschleiß von feuerfesten Schieberplatten durch Korrosion

    Müller, M. A., 2010

    Research output: Thesis › Doctoral Thesis

  76. Published

    Development of a Microstructural Methodology to Establish Structur/Property Relations of Refractories and First Results for Magnesia Spinel Materials

    Grasset-Bourdel, R., Gruber, D., Harmuth, H., Huger, M., Emler, R. & Chotard, T., 2010, Proceedings of the 49th Conference of Metallurgists; Advances in Refractories V. p. 425-440

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Die Single Hot Thermocouple Technique zur Charakterisierung des Kristallisationsverhaltens transparenter Schmelzen

    Kölbl, N., Marschall, I. & Harmuth, H., 2010, Stranggießen. p. 81-86

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Direkte Untersuchung des Aufschmelz- und Erstarrungsverhaltens von Gießpulvern und Gießschlacken unter Anwendung von Hochtemperaturverfahren

    Kölbl, N., 2010

    Research output: Thesis › Doctoral Thesis

  79. Published

    Einfluss der Strömungsmechanik auf den Verschleiß feuerfester Baustoffe

    Vollmann, S., 2010

    Research output: Thesis › Doctoral Thesis

  80. Published

    "Flexibility" of refractories - fracture mechanical and microscopic investigations

    Harmuth, H., 2010, Proceedings of the International Scientific Conference Refractories, Furnaces and Thermal Insulations. p. 36-41

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    Investigation of Refractory Brittleness by Fracture Mechanical and Fractographic Methods

    Harmuth, H. & Bradt, R. C., 2010, In: Interceram / Refractories manual. p. 6-10

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Investigation of Refractory Corrosion of a Gas-stirred Steel Ladle by Simulation.

    Vollmann, S. & Harmuth, H., 2010, 12th International Ceramics Congress Part I. p. 199-204

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Investigation of Refractory Corrosion of a Gas-stirred Steel Ladle by Simulation.

    Vollmann, S. & Harmuth, H., 2010, Refractories: recent developments in materials, production and use : selected papers from the 12th International Ceramics Congress, part of CIMTEC 2010-12th International Ceramics Congress and 5th Forum on New Materials, Montecatini Terme, Italy, June 6 - 11, 2010 ; part I including Symposium CL . p. 199-204 (Advances in science and technology; vol. 70).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Investigation of the rotary slagging test by computational fluid dynamics calculations

    Vollmann, S. & Harmuth, H., 2010, In: Journal of the Technical Association of Refractories. 30, p. 10-18

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Melt corrosion of refractories in the non-ferrous industry and the electric arc furnace: A thermochemical approach

    Reiter, V. & Harmuth, H., 2010, 14th International Symposium on Solubility Phenomena ISSP 2010. p. 34-34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Microstructural and thermochemical analysis of spinel castables used in steel ladles

    Melcher, F. & Harmuth, H., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  87. Published

    Modélisation des propriétés d'élasticité de matériaux réfractaires modéles par homogénéisation périodique

    Grasset-Bourdel, R., Gruber, D., Harmuth, H., Schmitt, N., Alzina, A., Huger, M. & Chotard, T., 2010, Modélisation des propriétés d'élasticité de matériaux réfractaires modéles par homogénéisation périodique. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    New methode to Determine the Cohesion and the Friction Angle of Refractory Materials ar Room Temperature and at Elevated Temperature

    Dahlem, E., Gruber, D., Auer, T., Harmuth, H., Huger, M. & Chotard, T., 2010, Proceedings of the 49th Conference of Metallurgists; Advances in Refractories V. p. 497-504

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    Optimisation d’une géométrie d’éprouvette pour essai sous sollicitation combinée compression-cisaillement de matériaux réfractaires

    Dahlem, E., Gruber, D., Auer, T., Harmuth, H., Huger, M. & Chotard, T., 2010, Materiaux 2010. p. 97-99

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Predicition of volatile recirculation in cement clinker burning systems by means of process simulation

    Emler, R. & Harmuth, H., 2010, 14th International Symposium on Solubility Phenomena ISSP 2010. p. 35-35

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Propriétés thermomécaniques de réfractaires magnésie/spinelle modèles

    Grasset-Bourdel, R., Emler, R., Gruber, D., Harmuth, H., Huger, M. & Chotard, T., 2010, Propriétés thermomécaniques de réfractaires magnésie/spinelle modèles. p. 100-102

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. Published

    Relevance of numerical simulation for refractory corrosion in steel industry

    Harmuth, H., Vollmann, S., Melcher, F., Gruber, D. & Majcenovic, C., 2010, Advances in Refractories V, 5th International Symposium, The Michel Rigaud Symposium. p. 453-463

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Simulation of moulding of refractory bricks

    Gruber, D. & Harmuth, H., 2010, Refractories: recent developments in materials, production and use : selected papers from the 12th International Ceramics Congress, part of CIMTEC 2010-12th International Ceramics Congress and 5th Forum on New Materials, Montecatini Terme, Italy, June 6 - 11, 2010 ; part I including Symposium CL . p. 167-172 (Advances in science and technology; vol. 70).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Simulation of moulding of Refractory bricks

    Gruber, D. & Harmuth, H., 2010, CIMTEC, 12th International Ceramics Congress Part I. p. 167-172

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Thermomechanical Failure Modes of Steel Ladles

    Gruber, D., Auer, T. & Harmuth, H., 2010, Proceedings of the 49th Conference of Metallurgists; Advances in Refractories V,. p. 465-476

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Thermo-mechanical simulation of two alternative steel ladle linings

    Auer, T., Gruber, D. & Harmuth, H., 2010, Refractories for Metallurgy. p. 94-97

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Untersuchung der Sprödigkeit feuerfester Baustoffe mit bruchmechanischen und fraktographischen Methoden

    Harmuth, H. & Bradt, R. C., 2010, In: Keramische Zeitschrift. 62, p. 264-269

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Untersuchungen zur Bindung keramischer Schleifkörper

    Akcay, C., 2010, 47 p.

    Research output: Thesis › Master's Thesis

  99. 2009
  100. Published

    Behavior of magnesium and silicon in the formation of MgO/AlN composite

    Li, Y., Jin, S., Liu, G., Zhang, W., Ao, J. & Li, Z., Aug 2009, In: Journal of materials science. 44, 15, p. 4155-4161

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Microstructural evolution in MgOp/AlN composites

    Li, Y. W., Jin, S. L., Li, Y. B., Zhao, L. & Li, Z. Y., Aug 2009, In: Ceramics International : CI. 35, 6, p. 2241-2247

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Effect of Temperature on the Properties and Microstructures of Carbon Refractories for Blast Furnace

    Chen, X., Li, Y., Li, Y., Jin, S., Zhao, L. & Ge, S., Jul 2009, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 40A, 7, p. 1675-1683

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    An Austrian experience with identification and assessment of alkali-aggregate reaction in motorways

    Fischböck, E. K. & Harmuth, H., 2009, Proceedings of the international conference on concrete repair, rehabilitation and retrofitting 2008. p. 441-447

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  104. Published

    Application of attenuation of resonant frequencies for characterisation of alkali-silica reaction

    Fischböck, E., Harmuth, H. & Eberl, S., 2009, Concrete Durability and Service Life Planning -ConcreteLife'09. p. 196-203

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  105. Published

    Basic understanding of wear of refractories in metallurgical vessels

    Gruber, D. & Harmuth, H., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1 2 3 4 5 6 Next
View graph of relations

Contact information

Peter-Tunner-Straße 5, 8700 Leoben
  • Main phone number: +43 3842 402 3201