Chair of Casting Research (330)

Organisational unit: Chair

151 - 200 out of 434Page size: 50

Research output

  1. 2016
  2. Published

    Atomistic experimental and simulation investigation on the modification of Al-Si alloys

    Li, J., May 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  3. Published

    High resolution observation of solidification interfaces in Al-Si alloys

    Schumacher, P., 26 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  4. Published

    Mikrogefüge von Al-Si Legierungen: Kornfeinung und Porenbildung

    Schumacher, P., 14 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  5. Published

    Einfluss von Spurenelementen auf das Eigenschaftspotential einer Aluminium-Gusslegierung

    Pabel, T., Kneißl, C., Petkov, T. & Schumacher, P., 7 Apr 2016.

    Research output: Contribution to conference › Poster › Research

  6. Published

    Montanuniversität Leoben - Kompetenz durch Kooperation

    Schumacher, P., Apr 2016, In: Giesserei. 4, p. 30-33 4 p.

    Research output: Contribution to journal › Article › Research

  7. Published

    Heterogeneous nucleation of entrained eutectic Si in high purity melt spun Al-Si alloys investigated by entrained droplet technique and DSC

    Li, J. H., Albu, M., Ludwig, T. H., Hofer, F., Arnberg, L. & Schumacher, P., 31 Mar 2016, In: IOP Conference Series: Materials Science and Engineering. 117, 1, 012006.

    Research output: Contribution to journal › Conference article › peer-review

  8. Published

    Impurity effects on the solidification of primary Al3(Sc,Zr) phase in Al alloys

    Li, J. H. & Schumacher, P., 31 Mar 2016, In: IOP Conference Series: Materials Science and Engineering. 117, 1, 012020.

    Research output: Contribution to journal › Conference article › peer-review

  9. Published

    Atomistic Experimental and Simulation Investigation on the Modification of Al-Si alloys

    Schumacher, P. & Li, J., 17 Feb 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  10. Published

    Atomistic Experimental and Simulation Investigation on the Modification of Al-Si alloys

    Li, J., Hage, F., Romaner, L., Scheiber, D., Ramasse, Q. & Schumacher, P., 17 Feb 2016, Frontiers in solidification: Materials Processing & Manufacturing Division (MPMD) Symposium in Honor of Michel Rappaz.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Modification of eutectic Si and refinement of eutectic grain in Al-Si-Mag alloys by CrB2 and Sr addition

    Li, J. & Schumacher, P., 17 Feb 2016, Light Metals 2016. p. 711-714

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Preliminary Investigation of the Grain Refinement Mechanism in Cu Alloys

    Cziegler, A. & Schumacher, P., 17 Feb 2016, Shape Casting: 6th International Symposium, TMS 2016 145th Annual Meeting & Exhibition. Tiryakioğlu, M., Jolly, M. & Byczynski, G. (eds.). p. 159-166 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Effect of trace elements on material properties of an aluminium casting alloy

    Pabel, T., Kneißl, C., Petkov, T. & Schumacher, P., Feb 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    Simultaneously refining eutectic grain and modifying eutectic Si in Al-10Si-0.3Mg alloys by Sr and CrB2 additions

    Li, J. & Schumacher, P., Feb 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  15. Published

    Wolfram-Verbundwerkstoffe als Formenmaterial im Druckguss

    Hofer, P., Gössl, W., Tucan, K.-P., Schindelbacher, G. & Schumacher, P., 18 Jan 2016, In: Giesserei. 103.2016, 1, p. 76-83 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    A novel route to produce a homogeneous certified reference material for k0-neutron activation analysis: Application to the certification of gold mass fraction in an Al-0.1 % Au alloy

    Bacquart, T., Li, J., Ribeiro Guevara, S., Arribere, M. A., Gerganova, T., Sterckx, M., Schumacher, P. & Linsinger, T. P. J., 1 Jan 2016, In: Microchemical journal. 124, p. 159-166

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Aging Behavior of Nano-SiC/2014Al Composite Fabricated by Powder Metallurgy and Hot Extrusion Techniques

    Wang, Z., Li, C., Wang, H., Zhu, X., Wu, M., Li, J. & Jiang, Q., 2016, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 32 (10), p. 1008 1012 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Cluster formation at the Si / liquid interface in Sr and Na modified Al-Si alloys

    Barrirero, J., Li, J., Engstler, M., Ghafoor, N., Schumacher, P., Odén, M. & Mücklich, F., 2016, In: Scripta materialia. 117, p. 13-16 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Development and numerical simulation of a compound belt casting process

    Heugenhauser, S., Kaschnitz, E., Mittler, T., Pintore, M. & Schumacher, P., 2016, Proceedings, TMS 2016, Nashville, USA. p. 1017-1021

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Effects of trace elements (Y and Ca) on the eutectic Ge in Al–Ge based alloys

    Li, J., Wanderka, N., Balogh, Z., Stender, P., Kropf, H., Albu, M., Tsunekawa, Y., Hofer, F., Schmitz, G. & Schumacher, P., 2016, In: Acta materialia. 111, p. 85-95 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Effects of Yb additions on refinement of eutectic si in Al-5Si alloys

    Li, J. H. & Schumacher, P., 2016, In: Minerals, Metals and Materials Series. 210869, p. 1017-1022 6 p.

    Research output: Contribution to journal › Conference article › peer-review

  22. Published

    Energieeffiziente Wärmebehandlung der Gusslegierungen AlSi7Mg0,3 und AlSi9Cu3(Fe)

    Staggl, S., Bozorgi, S., Kretz, R. & Schumacher, P., 2016, In: Berg- und hüttenmännische Monatshefte : BHM. p. 116-125

    Research output: Contribution to journal › Article › Research

  23. Published

    Eutectic solidification microstructure of an Al-4Ni-2Mn alloy

    Yu, W., Hao, Q., Fan, L. & Li, J., 2016, In: Journal of alloys and compounds. 688, p. 798-803 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Grain refinement of hypoeutectic Al-Si alloys with B

    Chen, Z., Kang, H., Fan, G., Li, J., Lu, Y., Jie, J., Zhang, Y., Li, T., Jian, X. & Wang, T., 2016, In: Acta materialia. 120, p. 168 178 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Hochsiliziumhaltiges Gusseisen mit Kugelgraphit für Großmotoren-Zylinderkopfanwendungen

    Neuhauser, P., 2016

    Research output: Thesis › Master's Thesis

  26. Published

    Investigation of heterogeneous nucleation interface of TiB2 in Al alloys by atomic STEM-HAADF and EELS

    Li, J., Hage, F., Ramasse, Q. & Schumacher, P., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  27. Published

    Microstructure and mechanical properties of a nanocrystalline AlNbTiV high-entropy alloy

    Schuh, B., Völker, B., Li, J., Maier, V., Pippan, R. & Hohenwarter, A., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  28. Published

    Microstructure Evolution and Mechanical Properties of directionally solidified Mg-xGd (x¼0.8, 1.5,and2.5)alloys

    Luo, S., Yang, G., Liu, S., Wang, J., Li, J. & Jie, W., 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 662, p. 241-250 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Modification of the eutectic Mg2Si-phase of AlMgSi-cast alloys

    Pabel, T., Petkov, T., Kneissl, C. & Schumacher, P., 2016, In: Minerals, Metals and Materials Series. 210869, p. 303-304 2 p.

    Research output: Contribution to journal › Conference article › peer-review

  30. Published

    New Possibilities with Improved Green Sand Testing Facilities

    Kerber, H., Riegler, M., Schindelbacher, G. & Schumacher, P., 2016, In: Livarski vestnik. 1, p. 2-14 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Potential alternativer Formstoffe zur Kernherstellung

    Geraseva, O., 2016

    Research output: Thesis › Master's Thesis

  32. Published

    Precipitation hardening of an Mg-5Zn-2Gd-0.4Zr (wt. %) alloy

    Li, J., Barrirero, J., Sha, G., Aboulfadl, H., Mücklich, F. & Schumacher, P., 2016, In: Acta materialia. 108, p. 207-218 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Revealing heterogeneous nucleation of primary Si and eutectic Si by AlP in hypereutectic Al-Si alloys

    Li, J., Hage, F. S., Liu, X., Ramasse, Q. & Schumacher, P., 2016, In: Scientific reports (London : Nature Publishing Group). 6, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    The bulk and interfacial structures of the η (Al2Au) precipitate phase

    Bourgeois, L., Zhang, Z., Li, J. & Medhekar, N., 2016, In: Acta materialia. 105.2016, 15 February, p. 284-293 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Ultrasound degassing and computed tomography quality control

    Pabel, T., Petkov, T., Habe, D. & Schumacher, P., 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  36. Published

    Ultrasound degassing and computed tomography quality control

    Pabel, T., Petkov, T., Habe, D. & Schumacher, P., 2016, Conference Proceedings: 19th World Conference on Non-Destructive Testing.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Untersuchung der maßgebenden Einflüsse auf das Biegewechselverhalten moderner mischkristallverfestigter Sphärogusswerkstoffe

    Danesh Marnani, R., 2016

    Research output: Thesis › Master's Thesis

  38. Published

    Untersuchung der maßgebenden metallurgischen Einflussmöglichkeiten auf Eigenschaften und Gefüge moderner mischkristallverfestigter Sphärogusswerkstoffe

    Michel, D. C., 2016

    Research output: Thesis › Master's Thesis

  39. 2015
  40. Published

    Festschrift zum Jubiläum 175 Jahre Montanuniversität Leoben, 2015: Lehrstuhl für Giessereikunde

    Schumacher, P., Oct 2015, Die Entwicklung der Montanuniversität Leoben seit 1990: 175 Jahre. Vol. 1. p. 164-167 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Education

  41. Published

    Atomistic characaterization on the solute clustering and precipitation of Mg alloys

    Schumacher, P. & Li, J., 23 Sept 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  42. Published

    The roles of Eu during the growth of eutectic Si in Al-Si alloys

    Li, J., Hage, F., Wiessner, M., Romaner, L., Scheiber, D., Sartory, B., Ramasse, Q. & Schumacher, P., 2 Sept 2015, In: Scientific reports (London : Nature Publishing Group). 5, 13802 , p. 1-10 10 p., Scientific Reports | 5:13802 | DOI: 10.1038/srep13802.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Aspects of modern production methods of integrated high pressure die castings

    Tucan, K.-P., Hofer, P. & Schumacher, P., Sept 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  44. Published

    Verfahren zur Raffination und Gefügemodifukation Von AlMgSi-Legierungen

    Pabel, T. (Inventor) & Schumacher, P. (Inventor), 26 Aug 2015, IPC No. C22C1/02, C22C1/03, C22C21/08, Patent No. EP2705171 (B1), Priority date 3 May 2011, Priority No. AT20110000615 20110503

    Research output: Patent

  45. Published

    A benchmark for the validation of solidification modelling algorithms

    Kaschnitz, E., Heugenhauser, S. & Schumacher, P., 8 Jul 2015, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Aspects of grain refinement in copper alloys

    Cziegler, A., 16 Jun 2015.

    Research output: Contribution to conference › Poster › Research

  47. Published

    Sustainable Technology of Metal Materials

    Schumacher, P., 4 Jun 2015.

    Research output: Contribution to conference › Presentation › Education

  48. Published

    Potenziale von Standard-Druckgusslegierungen

    Tucan, K.-P., Hofer, P., Schindelbacher, G., Schumacher, P. & Gschwandtner, R., 2 Jun 2015, In: Giesserei. 6, p. 52-64

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Al solidification fundamentals, Grain refinement theory

    Schumacher, P., 12 May 2015.

    Research output: Contribution to conference › Presentation › Research

  50. Published

    Einfluss von Spurenelementen auf die Veredelung und die Größe von eutektischen Körnern in Al-Si Legierungen

    Li, J. H., Albu, M., Hofer, F. & Schumacher, P., 19 Mar 2015.

    Research output: Contribution to conference › Presentation › Research

  51. Published

    Key roles of impurities during solidification in Al alloys

    Schumacher, P., 17 Mar 2015.

    Research output: Contribution to conference › Presentation › Research

  52. Published

    Numerische Simulation und praktische Versuche zum Verbundgießen von Aluminiumlegerungen

    Heugenhauser, S., Kaschnitz, E., Langbein, F. & Schumacher, P., Mar 2015, In: Giesserei. 3, p. 40-47

    Research output: Contribution to journal › Article › Research

Previous 1 2 3 4 5 6 7 8 9 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 3301