Research output

1 - 50 out of 32,757Page size: 50

Sort by: 1st author

Published
The bulk and interfacial structures of the η (Al2Au) precipitate phase
Bourgeois, L., Zhang, Z., Li, J. & Medhekar, N., 2016, In: Acta materialia. 105.2016, 15 February, p. 284-293 10 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Effect of local loading on microstructure and enhanced mechanical property of large complex castings prepared by Al–Si–Fe–Mn–Mg–Cu alloy during squeeze casting
Meng, S., Gao, M., Liu, Y., Yang, L., Ma, H., LI, J., Wang, J. & Guan, R., 2024, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY.
Research output: Contribution to journal › Article › Research › peer-review
Published
Precipitation microstructure in Al-Si-Mg-Mn alloy with Zr additions
Vončina, M., Medved, J., Kores, S., Xie, P., Schumacher, P. & LI, J., Sept 2019, In: Materials characterization. 155.2019, September, 8 p., 109820.
Research output: Contribution to journal › Article › Research › peer-review
Published
Microstructure, texture evolution and tensile properties of extruded Mg-4.58Zn-2.6Gd-0.16Zr alloy
Xiao, L., Yang, G., Chen, J., Luo, S. F., Li, J. & Jie, W., 28 Jan 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 744.2019, January, p. 277-289 13 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Microstructure and Tensile Properties of AZ61 Alloy Sheets Processed by High-Ratio Extrusion with Subsequent Direct Aging Treatment
Zhang, C-C., Wang, H-Y., Zha, M., Wang, C., Li, J-H., Yang, Z-Z. & Jiang, Q-C., 26 May 2018, In: Materials. 11.2018, 6, 11 p., 895.
Research output: Contribution to journal › Article › Research › peer-review
Published
Microstructure and mechanical properties of Cu_xNb_1- _x alloys prepared by ball milling and high pressure torsion compacting
Abad, M. D., Parker, S., Kiener, D., Primorac, M. M. & Hosemann, P., 5 May 2015, In: Journal of alloys and compounds. 630, p. 117-125 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Microstructure and mechanical properties of novel CuNb alloys prepared by ball milling and high pressure torsion
Abad, M. D., Parker, S., Kiener, D., Primorac, M-M. & Hosemann, P., 2014.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Chemically induced fracturing in alkali feldspar
Abart, R., Schäffer, A. K., Scheidl, K. & Fischer, F. D., 2012.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Thermodynamic Model for Diffusion controlled Reaction Rim Growth in a Binary System: Application to the Forsterite-Enstatite-Quartz System
Abart, R., Petrishcheva, E., Fischer, F. D. & Svoboda, J., 2009, In: American Journal of Science. 309, p. 114-131
Research output: Contribution to journal › Article › Research › peer-review
Published
Evolution of chemically induced cracks in alkali feldspar: thermodynamic analysis
Abart, R., Petrishcheva, E., Habler, G., Sutter, C., Fischer, F-D., Predan, J., Kegl, M. & Rammerstorfer, F. G., 3 May 2022, In: Physics and Chemistry of Minerals. 49.2022, 14, 15 p., 14.
Research output: Contribution to journal › Article › Research › peer-review
Published
Production and characterization of a polysaccharide/polyamide blend from Pseudomonas atacamensis M7D1 strain for enhanced oil recovery application
Abbaspour, A., Jafari, A., Tarahomi, D. S., Mousavi, S. M. & Kharrat, R., 15 Jun 2023, In: International Journal of Biological Macromolecules. 240.2023, 15 June, 11 p., 124421.
Research output: Contribution to journal › Article › Research › peer-review
Published
A new method for polychromatic X-ray μLaue diffraction on a Cu pillar using an energy-dispersive pn-junction charge-coupled device
Abboud, A., Kirchlechner, C., Send, S., Micha, J. S., Ulrich, O., Pashniak, N., Strüder, L. W. J., Keckes, J. & Pietsch, U., 2014, In: Review of scientific instruments. 85, p. 1139011-1139018
Research output: Contribution to journal › Article › Research › peer-review
Published
Identification of potential candidates for Linear Rod Pump (LRP) applications in OMV PETROM and definition of standard LRP types
Abdalla, H., 2013
Research output: Thesis › Master's Thesis
Published
Differentiation of the Artificial Rocks in Mechanical Cutting Based on the Acoustic Emission Signals
Abdallah, A. S. M., 2021
Research output: Thesis › Master's Thesis
E-pub ahead of print
Large-scale underground hydrogen storage: Integrated modeling of reservoir-wellbore system
Abdellatif, M. M., Hashemi, M. & Azizmohammadi, S., 24 Feb 2023, (E-pub ahead of print) In: International Journal of Hydrogen Energy . 48.2023, 50, p. 19160-19171 12 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Integrated Modeling of Underground Hydrogen Storage: Viking A Field, the North Sea
Abdellatif, M. M., 2022
Research output: Thesis › Master's Thesis
Published
Development of a Sand Prediction Model for a Gas Field Located in South Tunisia
Abdellatif, M., 2017
Research output: Thesis › Master's Thesis
Published
Feasibility of Surfactant-Based EOR Mechanisms in Microfluidics
Abdellatif, S., 2018
Research output: Thesis › Master's Thesis
Published
Suitability of Self-Reducing and Slag-Forming Briquettes for Electric Arc Furnace Use Based on Laboratory Tests
Abdelrahim, A., Aula, M., Iljana, M., Willms, T., Echterhof, T., Steinlechner, S., Mombelli, D., Mapelli, C., Omran, M., Preiss, S. & Fabritius, T., 26 Oct 2021, In: Steel research international.
Research output: Contribution to journal › Article › Research › peer-review
Published
Regular graphs with minimum spectral gap
Abdi, M., Ghorbani, E. & Imrich, W., Jun 2021, In: European journal of combinatorics . 95, 18 p., 103328.
Research output: Contribution to journal › Article › Research › peer-review
Published
Designing new biocompatible glass-forming Ti_75- _xZr₁₀Nb_xSi₁₅ (x = 0, 15) alloys: Corrosion, passivity, and apatite formation
Abdi, S., Oswald, S., Gostin, P. F., Helth, A., Sort, J., Barõ, M. D., Calin, M., Schultz, L., Eckert, J. & Gebert, A., 1 Jan 2016, In: Journal of Biomedical Materials Research - Part B Applied Biomaterials. 104, 1, p. 27-38 12 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Thermal oxidation behavior of glass-forming Ti-Zr-(Nb)-Si alloys
Abdi, S., Bönisch, M., Oswald, S., Khoshkhoo, M. S., Gruner, W., Lorenzetti, M., Wolff, U., Calin, M., Eckert, J. & Gebert, A., 1 May 2016, In: Journal of materials research (JMR). 31.2016, 9, p. 1264-1274 11 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Ab initio study of martensitic and ordering transformations in intermetallic TiAl-alloys
Abdoshahi, N., 2021
Research output: Thesis › Doctoral Thesis
E-pub ahead of print
On the energetics of the cubic-to-hexagonal transformations in TiAl+Mo alloys
Abdoshahi, N., Dehghani, M., Ruban, A. V., Friák, M., Šob, M., Spitaler, J. & Holec, D., 24 Aug 2022, (E-pub ahead of print) In: Acta materialia. 240.2022, November, p. 118268 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Ordering and diffusionless transformations in TiAl
Abdoshahi, N. & Holec, D., 2018.
Research output: Contribution to conference › Poster › Research
Published
Structural stability and mechanical properties of TiAl+Mo alloys: A comprehensive ab initio study
Abdoshahi, N., Dehghani, M., Hatzenbichler, L., Spörk-Erdely, P., Ruban, A. V., Musi, M., Mayer, S., Spitaler, J. & Holec, D., Dec 2021, In: Acta materialia. 221.2021, December, 14 p., 117427.
Research output: Contribution to journal › Article › Research › peer-review
Published
Ab initio study of chemical disorder as an effective stabilizing mechanism of bcc-based TiAl(+Mo)
Abdoshahi, N., Spörk-Erdely, P., Friák, M., Mayer, S., Šob, M. & Holec, D., 2 Oct 2020, In: Physical review materials . 24.020, 10, 14 p., 103604.
Research output: Contribution to journal › Article › Research › peer-review
Published
Condensate Bank Modelling of Gas Condensate Reservoirs
Abdul-Jaliel, H-E. M., 2010
Research output: Thesis › Master's Thesis
Published
A comprehensive review of nanoparticles: Effect on water-based drilling fluids and wellbore stability
Abdullah, A. H., Ridha, S., Mohshim, D. F., Yusuf, M., Kamyab, H., Krishna, S. & Maoinser, M. A., 1 Sept 2022, In: Chemosphere. 308.2022, December, Part 1, 17 p., 136274.
Research output: Contribution to journal › Article › Research › peer-review
Study the effect of fracture inclination, spacing and intensity on polymer flooding efficiency
Abedi, B. & Kharrat, R., 9 Jul 2016, (E-pub ahead of print) In: Journal of Natural Gas Science and Engineering. 34.2016, August, p. 645-649 5 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Experimental study of polymer flooding in fractured systems using five-spot glass micromodel: The role of fracture geometrical properties
Abedi, B., Ghazanfari, M. & Kharrat, R., 1 Oct 2012, In: Energy exploration & exploitation. 30, 5, p. 689-706 18 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Fused Filament Fabrication (FFF) of Metal-Ceramic Components
Abel, J., Scheithauer, U., Janics, T., Hampel, S., Cano Cano, S., Müller-Köhn, A., Günther, A., Kukla, C. & Moritz, T., 11 Jan 2019, In: JoVE. 2019, 143, p. 1-13
Research output: Contribution to journal › Article › Research › peer-review
Published
Digitalisation of manual sorting through Artificial Intelligence, Machine Learning and Human Machine Interaction
Aberger, J. & Sarc, R., 18 Sept 2023.
Research output: Contribution to conference › Poster › Research
Published
Potentials in Hand-Sorting of Plastic Waste and Further Developments with HMIs in the Hand-Sorting Process
Aberger, J., Khodier, K. & Sarc, R., 24 Sept 2023.
Research output: Contribution to conference › Paper
Published
Digitalisierung der Handsortierung durch künstliche Intelligenz, Machine Learning und Human Machine Interaction
Aberger, J. & Sarc, R., 19 Apr 2023.
Research output: Contribution to conference › Poster › Research
Published
Recyclingfähigkeit phosphorhaltiger Metallschleifschlämme
Aberger, J., 2022
Research output: Thesis › Master's Thesis
E-pub ahead of print
Digitalisierung der Handsortierung durch Künstliche Intelligenz, Machine Learning und Human Machine Interaction
Aberger, J., Khodier, K. & Sarc, R., 15 Nov 2023, (E-pub ahead of print) In: Österreichische Wasser- und Abfallwirtschaft : ÖWAW . 2023, ??? Stand: 4. Dezember 2023, 7 p.
Research output: Contribution to journal › Article › Research
Published
RecAlcle: Supporting manual sorting workers with Aritifical Intelligence and Machine Learning - Framework and Data Acquisition
Aberger, J., Khodier, K. & Sarc, R., 6 Oct 2023, Proceedings of Sardinia 2023.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Vergleichende Betrachtung zur Klimarelevanz bei der Aufreinigung schwermetallbelasteter Wässer
Abi Fadel-Gampersberger, A. J. P., 2022
Research output: Thesis › Master's Thesis
Published
Viskositätsbestimmung von nicht newtonschen Schmelzen
Ablasser, M., 2021
Research output: Thesis › Master's Thesis
Published
Studying the Effect of Cellulose Nanocrystals on Oil Well Cement Properties
Abou Askar, I., 2021
Research output: Thesis › Master's Thesis
E-pub ahead of print
The bin covering with delivery problem, extended investigations for the online case
Abraham, G., Auer, P., Dosa, G., Dulai, T., Tuza, Z. & Werner-Stark, Á., 30 Apr 2022, (E-pub ahead of print) In: Central European Journal of Operations Research. 31.2023, March, p. 21-47 27 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
A New Approach to History Matching of Water Driven Oil Reservoirs
Abrahem, F., 2010
Research output: Thesis › Doctoral Thesis
Published
Recovery Optimization in Commingled Produced Reservoir Units: A Case Study on Lower GIR
Abrahem, F., 2006, 120 p.
Research output: Thesis › Master's Thesis
Published
Mineralogical Characterization of Dilband Iron Ore Deposits of Balochistan, Pakistan
Abro, M. I. & Böhm, A., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. p. 206-210
Research output: Contribution to journal › Article › Research › peer-review
Published
Electronic properties of YBa2Cu306.5 compared to YBa2Cu307 in Anharmonic Properties of High-Tc Cuprates
Abt, R., Kouba, R. & Draxl, C., 1995, Proceedings of the International Workshop on Anharmonic Properties of High-Tc Cuprates . p. 236-239
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Optical response of high temperature superconductors by full potential LAPW band structure calculations
Abt, R., Draxl, C. & Knoll, P., 1994, In: Physica B: Condensed Matter. 194-196, 2, p. 1451-1452
Research output: Contribution to journal › Article › Research › peer-review
Published
Piezoelectric Properties of Zinc Oxide Thin Films Grown by Plasma-Enhanced Atomic Layer Deposition
Abu Ali, T., Pilz, J., Schäffner, P., Kratzer, M., Teichert, C., Stadlober, B. & Coclite, A. M., Nov 2020, In: Physica Status Solidi / A, Applications and Materials Science. 217, 21, 2000319.
Research output: Contribution to journal › Article › Research › peer-review
Published
Characterization of technologically produced carbon (CMP) applied in agriculture
Abu Zahra, N., Prohaska, T., Bandoniene, D., Fernández Balado, C., Hood-Nowotny, R., Soja, G., Obenaus-Emler, R., Wagner, S. & Puschenreiter, M., 2 Feb 2023.
Research output: Contribution to conference › Poster › Research
Published
Carbon produced by methane plasmalysis - a potential soil amendment?
Abu Zahra, N., Bandoniene, D., Fernández Balado, C., Kanzler, V., Hood-Nowotny, R., Soja, G., Obenaus-Emler, R., Wagner, S., Puschenreiter, M. & Prohaska, T., 10 Jul 2023.
Research output: Contribution to conference › Poster › Research

Previous 1 2 3 4 5 6 7 8 ...656 Next

Research Portal

Research output

Advanced filters