Verena Maier-Kiener

101 - 146 out of 146Page size: 100

Research output

  1. 2016
  2. E-pub ahead of print

    Extraction of flow behavior and hall–petch parameters using a nanoindentation multiple sharp tip approach

    Leitner, A., Maier-Kiener, V. & Kiener, D., 29 Nov 2016, (E-pub ahead of print) In: Advanced engineering materials. 19.2017, 4, 9 p., 1600669.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Interplay between sample size and grain size: Single crystalline vs. ultrafine-grained chromium micropillars

    Fritz, R., Maier-Kiener, V., Lutz, D. & Kiener, D., 30 Sept 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674.2016, 30 September, p. 626-633 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Phase decomposition of a nanocrystalline AlNbTiV high-entropy alloy

    Schuh, B., Völker, B., Todt, J., Hohenwarter, A., Maier-Kiener, V. & Li, J., 5 Aug 2016.

    Research output: Contribution to conference › Presentation › Research

  5. Published

    Strain-rate sensitivity of ultrafine-grained materials and composites

    Kiener, D., Leitner, A. & Maier-Kiener, V., 4 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  6. Published

    Deformation behaviour of BCC metals investigated by small- and macro-scale testing techniques

    Fritz, R., Wimler, D., Famelton, J., Leitner, A., Maier-Kiener, V. & Kiener, D., 31 May 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  7. Published

    Phase Characterization of a Biocompatible Co-Cr-W Alloy by means of Correlative Microscopy

    Weißensteiner, I., Voigt, P., Clemens, H. & Maier-Kiener, V., 28 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  8. Published

    Deformation Characteristics of Ultra-fine Grained BCC Metals at Ambient and Elevated Temperatures

    Kiener, D., Fritz, R., Wimler, D., Leitner, A. & Maier-Kiener, V., 12 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  9. Published

    Small scale deformation behavior of Au – influence of microstructure and temperature

    Maier-Kiener, V., Kiener, D., Leitner, A. & Pippan, R., 18 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  10. Published

    In-situ investigation of rate dependent material properties under non-ambient conditions: Challenges, limitations & insights

    Fritz, R., Wimler, D., Leitner, A., Maier-Kiener, V. & Kiener, D., 16 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  11. Published

    Microstructural stability of a single-phase nanocrystalline CoCrFeMnNi high-entropy alloy

    Schuh, B., Hohenwarter, A., Maier-Kiener, V., Clemens, H., Völker, B., Mendez Martin, F. & George, E., 15 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  12. Published

    Thermally Activated Deformation Processes in Body-Centered Cubic Cr – How Microstructure Influences Strain-Rate Sensitivity

    Maier-Kiener, V., Kiener, D., Pippan, R. & Hohenwarter, A., 15 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  13. Published

    Microstrucural Investigations of a nanocrystalline CoCrNi alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Völker, B. & Maier-Kiener, V., 6 Feb 2016.

    Research output: Contribution to conference › Poster › Research

  14. Published

    Analyse einer Co-Cr-W Legierung mittels korrelativer Mikroskopie und Nanoindentation

    Weißensteiner, I., Voigt, P., Clemens, H. & Maier-Kiener, V., 2016.

    Research output: Contribution to conference › Presentation › Research

  15. Published

    Contribution of Free Surface and Dislocation Density to the Strength Scaling Behaviour in Ultrafine-grained BCC Chromium

    Fritz, R., Leitner, A., Maier-Kiener, V. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  16. Published

    Correlative study of grain boundary segregation in sintered molybdenum alloys

    Lutz, D., Leitner, K., Huber, K., Lorich, A., Maier-Kiener, V. & Clemens, H., 2016.

    Research output: Contribution to conference › Presentation › Research

  17. Published

    Deformation in the y-Mg17Al12 phase at 25-278 °C

    Mathur, H. N., Maier-Kiener, V. & Korte, S., 2016, In: Acta materialia. 113, p. 221-229 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Does dynamic nanoindentation testing influence the acquired mechanical properties?

    Leitner, A., Cordill, M. J., Maier-Kiener, V. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  19. Published

    Dynamic indentation testing: Is there an influence on mechanical properties?

    Leitner, A., Cordill, M. J., Maier-Kiener, V. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  20. Published

    Fracture and Material Behavior of Thin Film composites

    Kozic, D., Konetschnik, R., Maier-Kiener, V., Schöngrundner, R., Brunner, R., Kiener, D., Antretter, T. & Gänser, H.-P., 2016, 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) . Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Influence of Free Surface on the Deformation Behaviour of ufg Chromium at Ambient & Elevated Temperatures

    Fritz, R., Leitner, A., Maier-Kiener, V. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  22. Published

    Interface dominated mechanical properties of ultra-fine grained and nanoporous Au at elevated temperatures

    Leitner, A., Maier-Kiener, V., Jeong, J., Abad, M. D., Hosemann, P., Oh, S. H. & Kiener, D., 2016, In: Acta materialia. 121.2016, December, p. 104-116 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Nanoindentation testing as a tool for assessing the microstructure-property relationship of ultrafine grained and single crystalline HEAs

    Maier-Kiener, V., Schuh, B., George, E., Clemens, H. & Hohenwarter, A., 2016.

    Research output: Contribution to conference › Presentation › Research

  24. Published

    Nanokristalline High-Entropy Legierungen

    Hohenwarter, A., Schuh, B., Völker, B., Pippan, R., Maier-Kiener, V., Clemens, H. & George, E. P., 2016.

    Research output: Contribution to conference › Presentation › Research

  25. Published

    Phase Characterization of a Biocompatible Co-Cr-W Alloy Via Correlative Microscopy

    Weißensteiner, I., Voigt, P., Maier-Kiener, V. & Clemens, H., 2016, In: Practical metallography = Praktische Metallographie. 53, 7, p. 450-461 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Phasencharakterisierung mittels korrelativer Mikroskopie an einer biokompatiblen Co-Cr-W Legierung

    Weißensteiner, I., Voigt, P., Maier-Kiener, V. & Clemens, H., 2016, Sonderbände der Praktischen Metallographie: Fortschritte in der Metallographie. Vol. 48. p. 151-156 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Precipitation-strengthened high-temperature ferrites

    Godor, F., Liebscher, C., Stein, F., Palm, M., Rashkova, B., Maier-Kiener, V., Mayer, S. & Clemens, H., 2016.

    Research output: Contribution to conference › Presentation › Research

  28. Published

    Small scale deformation behavior of Au – influence of microstructure and temperature

    Maier-Kiener, V., Leitner, T., Kiener, D. & Pippan, R., 2016.

    Research output: Contribution to conference › Presentation › Research

  29. Published

    Strain-induced martensitic transformation in a Co-Cr-W alloy studied by in-situ HEXRD experiments

    Weißensteiner, I., Erdely, P., Voigt, P., Clemens, H. & Maier-Kiener, V., 2016.

    Research output: Contribution to conference › Poster › Research

  30. 2015
  31. Published

    Influence of Microstructure on the Deformation Behaviour of Chromium

    Fritz, R., Wimler, D., Krautgasser, C., Leitner, A., Maier, V. & Kiener, D., 9 Apr 2015.

    Research output: Contribution to conference › Poster › Research

  32. Published

    Thermally activated deformation processes in body-centered cubic Cr - How microstructure influences strain-rate sensitivity

    Maier, V., Hohenwarter, A., Pippan, R. & Kiener, D., 31 Mar 2015, In: Scripta materialia. 106, p. 42-45 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Deformation behavior of ultra-fine porous Au

    Leitner, A., Maier-Kiener, V., Hosemann, P. & Kiener, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  34. Published

    Elevated temperature mechanical properties of novel ultra-fine grained Cu-Nb composites

    Primorac, M.-M., Abad, M. D., Hosemann, P., Kreuzeder, M., Maier, V. & Kiener, D., 2015, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 625, p. 296-302

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Fabrication and thermo-mechanical behavior of ultra-fine porous copper

    Kreuzeder, M., Abad, M. D., Primorac, M.-M., Hosemann, P., Maier, V. & Kiener, D., 2015, In: Journal of materials science. 50, p. 634-643

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Probing thermally activated properties on a local scale

    Kiener, D., Leitner, A. & Maier-Kiener, V., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  37. Published

    Temperature-dependent deformation of ufg materials and composites

    Maier-Kiener, V., Leitner, A., Kreuzeder, M., Primorac, M.-M., Hosemann, P. & Kiener, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  38. Published

    Thermo-mechanical properties of fine grained materials: Porous vs. crystalline vs. Composite

    Kiener, D., Kreuzeder, M., Primorac, M.-M., Leitner, A., Abad, M. D., Hosemann, P. & Maier-Kiener, V., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  39. Published

    Thermo-mechanical properties of ultra-fine grained fcc-bcc composites

    Maier-Kiener, V., Primorac, M.-M., Leitner, A., Kreuzeder, M. & Kiener, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  40. 2014
  41. Published

    Final report PN 6019

    Maier, V. & Kiener, D., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Multicomponent materials from machining chips compacted by equal-channel angular pressing

    Lapovok, R., Qi, Y., Ng, H. P., Maier, V. & Estrin, Y., 2014, In: Journal of materials science. 49, p. 1193-1204

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    The Influence of Grain Boundaries and Loading Conditions on the Deformation Behavior of bcc-and fcc-Metals

    Maier, V., Scherwitzel, D. & Kiener, D., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    The influence of strain rate and critical temperature on the deformation behavior of W, V and Cr

    Fritz, R., Riegelnegg, E., Treml, R., Alfreider, M., Maier, V. & Kiener, D., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  45. Published

    The Strengthening Effect of Phase Boundaries in a Severely Plastically Deformed Ti-Al Composite Wire

    Marr, T., Maier, V., Freudenberger, J., Höppel, H. W., Göken, M. & Schultz, L., 2014, In: Metals : open access journal . 4, p. 37-54

    Research output: Contribution to journal › Article › Research › peer-review

  46. 2013
  47. Published

    Activation Parameters for Deformation of Ultrafine-Grained Aluminium as Determined by Indentation Strain Rate Jumps at Elevated Temperature

    Wheeler, J. M., Maier, V., Durst, K., Göken, M. & Michler, J., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, p. 108-113

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    An improved long-term nanoindentation creep testing approach for studying the local deformation processes in nanocrystalline metals at room and elevated temperatures

    Maier, V., Merle, B., Göken, M. & Durst, K., 2013, In: Journal of materials research (JMR). 28, p. 1177-1188

    Research output: Contribution to journal › Article › Research › peer-review

  49. 2010
  50. Published

    Verfahren zur Herstellung eines mehrlagigen metallischen Verbundblechs und Verbundblech

    Schmidt, C. (Inventor), Knieke, C. (Inventor), Peukert, W. (Inventor), Maier, V. (Inventor), Höppel, H. W. (Inventor) & Göken, M. (Inventor), 29 Jun 2010

    Research output: Patent

  51. Published

    Verfahren zur Herstellung eines mehrlagigen metallischen Verbundblechs unter Verwendung einer Partikel-Suspension; entsprechendes Verbundblech

    Schmidt, C. (Inventor), Knieke, C. (Inventor), Peukert, W. (Inventor), Maier, V. (Inventor), Höppel, H. W. (Inventor) & Göken, M. (Inventor), 10 May 2010

    Research output: Patent

Previous 1 2 Next
View graph of relations

Contact

Phone: 4206

Latest Research Output

View more (146)