Thomas Griesser

101 - 200 out of 290Page size: 100

Research output

  1. 2018
  2. Published

    Comparison of the photolytic versus the hydrolytic degradation of dual-responsive polydimethylsiloxane network

    Giebler, M., Radl, S. V., Ast, M., Grießer, T., Kern, W. & Schlögl, S., 2018.

    Research output: Contribution to conference › Poster › Research

  3. Published

    Reversible Cycloadditionsreaktion von Anthracenen: Über einstellbare Materialeigenschaften, Selbstheilungsstrategien und Rissdetektion

    Radl, S., Schlögl, S., Grießer, T. & Kern, W., 2018.

    Research output: Contribution to conference › Paper

  4. Published

    Reversible Cycloadditionsreaktion von Anthracenen: Über einstellbare Materialeigenschaften, Selbstheilungsstrategien und Rissdetektion

    Radl, S., Schlögl, S., Grießer, T. & Kern, W., 2018.

    Research output: Contribution to conference › Poster › Research

  5. Published

    Reversible Cycloadditionsreaktion von Anthracenen: Über einstellbare Materialeigenschaften, Selbstheilungsstrategien und Rissdetektion

    Radl, S., Schlögl, S., Grießer, T. & Kern, W., 2018, Tagungsband des 27. Leobener Kunststoff-Kolloquiums.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Reversible Cycloadditionsreaktion von Anthracenen: Über einstellbare Materialeigenschaften, Selbstheilunsstrategien und Rissdetektion

    Radl, S., Schlögl, S., Grießer, T. & Kern, W., 2018.

    Research output: Contribution to conference › Poster › Research

  7. Published

    Study of photocleavable epoxy-anhydride networks using photosensitive o-nitrobenzyl ester links

    Giebler, M., Radl, S., Ast, M., Grießer, T., Kern, W. & Schlögl, S., 2018, Tagungsband des 27. Leobener Kunststoff-Kolloquiums, 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Study of photocleavable epoxy-anhydride networks using photosensitive o-nitrobenzylester links

    Giebler, M., Radl, S. V., Ast, M., Grießer, T. & Kern, W., 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat - Polymere in Druck- und Beschichtungstechnologien. Vol. 8.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Study of photocleavable epoxy-anhydride networks using photosensitive o-nitrobenzylester links

    Giebler, M., Radl, S., Ast, M., Grießer, T., Kern, W. & Schlögl, S., 2018.

    Research output: Contribution to conference › Poster › Research

  10. Published

    Switching "on" and "off" the adhesion in stimuli-responsive elastomers

    Kaiser, S., Radl, S. V., Manhart, J., Ayalur-Karunakaran, S., Griesser, T., Moser, A., Ganser, C., Teichert, C., Kern, W. & Schlögl, S., 2018, In: Soft Matter. 14, 13, p. 2547-2559 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Switching on and off the Adhesion in Stimuli-responsive Elastomers

    Kaiser, S., Radl, S. V., Schlögl, S., Grießer, T. & Kern, W., 2018.

    Research output: Contribution to conference › Poster › Research

  12. Published

    Synthesis and Applications of Stimuli-Responsive Elastomers

    Schlögl, S., Radl, S., Grießer, T. & Kern, W., 2018, Tagungsband Deutsche Kautschuktagung 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. 2017
  14. Published

    One-Step Noncovalent Surface Functionalization of PDMS with Chitosan-Based Bioparticles and Their Protein-Repellent Properties

    Bracic, M., Mohan, T., Grießer, T., Stana-Kleinschek, K., Strnad, S. & Fras-Zemlijc, L., 9 Nov 2017, In: Advanced Materials Interfaces. 4.2017, 21, 11 p., 1700416.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Branched poly(ethyleneimine): a versatile scaffold for patterning polymer brushes by means of remote photocatalytic lithography

    Panzarasa, G., Dübner, M., Soliveri, G., Edler, M. & Grießer, T., 8 Sept 2017, In: Nanotechnology. 28.2017, 39, 395302.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Photo-Reversible Elastomeric Materials as Shape Memory Polymers and Reversible Adhesives

    Kaiser, S., Radl, S. V. (Co-editor), Grießer, T. (Co-editor), Kern, W. & Schlögl, S. (Co-editor), 6 Sept 2017.

    Research output: Contribution to conference › Poster › Research

  17. Published

    Study of photocleavable epoxy-anhydride networks using photosensitive o-nitrobenzyl ester links

    Giebler, M., Radl, S. V. (Co-editor), Ast, M. (Co-editor), Grießer, T., Kern, W. (Co-editor) & Schlögl, S. (Co-editor), 6 Sept 2017.

    Research output: Contribution to conference › Poster › Research

  18. Published

    Exploring photo-curable thiol-yne resins for the 3D printing of biomedical devices

    Griesser, H., Oesterreicher, A. (Co-editor), Moser, A. (Co-editor), Schlögl, S. (Co-editor), Pichelmayer, M. (Co-editor) & Grießer, T. (Co-editor), 22 Aug 2017.

    Research output: Contribution to conference › Poster › Research

  19. Published

    Light triggered formation of photo-responsive epoxy based networks

    Rinaldi, R., Radl, S. V. (Co-editor), Roppolo, I. (Co-editor), Pölzl, K. (Co-editor), Ast, M. (Co-editor), Spreitz, J. (Co-editor), Grießer, T. (Co-editor), Kern, W. (Co-editor), Schlögl, S. (Co-editor) & Sangermano, M. (Co-editor), 22 Aug 2017.

    Research output: Contribution to conference › Poster › Research

  20. Published

    Simple method for the quantitative analysis of thin copolymer films on substrates by infrared spectroscopy using direct calibration

    Tazreiter, M., Christian, P., Schennach, R., Grießer, T. & Coclite, A. M., 21 Aug 2017, In: Analytical Methods. 9.2017, 36, p. 5266-5273 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    composição de resina adequada para impressão e método de impressão com o uso da mesma

    Andreas, O. (Inventor), Florian, M. (Inventor), Janine, B. (Inventor), Martina, G. (Inventor), Matthias, E. (Inventor), Meinhart, R. (Inventor) & Thomas, G. (Inventor), 15 Aug 2017, IPC No. C08L 101/ 16 A I, Patent No. BR112016023872, Priority date 14 Apr 2015, Priority No. WO2015EP58082

    Research output: Patent

  22. Published

    PRINTABLE ESTER BASED RESIN COMPOSITIONS AND PRINTING METHOD UTILIZING THE SAME

    Oesterreicher, A. (Inventor), GRIEßER, T. (Inventor), Edler, M. (Inventor), Mostegel, F. (Inventor) & Roth, M. (Inventor), 20 Apr 2017, IPC No. C08L 101/ 00 A I, Patent No. WO2017064145, Priority date 12 Oct 2015, Priority No. GB20150018033

    Research output: Patent

  23. Published

    Highly Water-soluble alpha-Hydroxyalkylphenone Based Photoinitiator for Low-migration Applications

    Roth, M., Hennen, D., Oesterreicher, A., Mostegel, F., Samusjew, A., Edler, M., Maier, E. & Grießer, T., 18 Apr 2017, In: Macromolecular chemistry and physics. 218.2017, 14, 6 p., 1700022.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    RESIN COMPOSITION SUITABLE FOR PRINTING AND PRINTING METHOD UTILIZING THE SAME

    Oesterreicher, A. (Inventor), GRIEßER, T. (Inventor), Edler, M. (Inventor), Mostegel, F. (Inventor), Gassner, M. (Inventor), Roth, M. (Inventor) & Billiani, J. (Inventor), 23 Feb 2017, IPC No. C09D 181/ 02 A I, Patent No. US2017051112, Priority date 14 Apr 2015, Priority No. WO2015EP58082

    Research output: Patent

  25. Published

    Resin composition suitable for printing and printing method utilizing the same

    安德烈亚斯·厄斯特赖歇尔, A. (Inventor), 托马斯·格里塞尔, T. (Inventor), 马蒂亚斯·埃德勒, M. (Inventor), 弗洛里安·莫斯特格尔, F. (Inventor), 马丁娜·加斯纳, M. (Inventor), 迈因巴尔特·罗特, M. (Inventor) & 亚尼内·比利亚尼, J. (Inventor), 22 Feb 2017, IPC No. C08G 75/ 14 A I, Patent No. CN106456831, Priority date 14 Apr 2015, Priority No. WO2015EP58082

    Research output: Patent

  26. Published

    ZUM DRUCKEN GEEIGNETE HARZZUSAMMENSETZUNG UND DRUCKVERFAHREN DAMIT

    Oesterreicher, A. (Inventor), Griesser, T. (Inventor), Edler, M. (Inventor), Mostegel, F. (Inventor), Gassner, M. (Inventor), Roth, M. (Inventor) & Billiani, J. (Inventor), 22 Feb 2017, IPC No. C08L 101/ 16 A I, Patent No. EP3131952, Priority date 14 Apr 2015, Priority No. WO2015EP58082

    Research output: Patent

  27. Published

    Enhancing the stability of UV‐curable thiol/vinyl carbonate resins

    Edler, M., Mostegel, F., Roth, M., Österreicher, A. & Kappaun, S., 20 Feb 2017, In: Journal of Applied Polymer Science. 134.2017, 24, 7 p., 44934.

    Research output: Contribution to journal › Article › Research

  28. Published

    RESIN COMPOSITION SUITABLE FOR PRINTING AND PRINTING METHOD UTILIZING THE SAME

    Oesterreicher, A. (Inventor), Edler, M. (Inventor), Mostegel, F. (Inventor), Billiani, J. (Inventor), Roth, M. (Inventor), Hartmann, D. G. (Inventor) & Grießer, T. (Inventor), 17 Feb 2017, IPC No. C08G75/14,A61F2/02,C08F38/00 , Patent No. IN201617038522

    Research output: Patent

  29. Published

    Ammoxidized Fenton-Activated Pine Kraft Lignin Accelerates Synthesis and Curing of Resole Resins

    Ghorbani, M., Konnerth, J., Budjav, E., Requejo Silva, A., Zinovyev, G., van Herwijnen, H. W. G., Edler, M., Grießer, T. & Liebner, F., 28 Jan 2017, In: Polymers. 9.2017, 2, 17 p., 43.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    RESIN COMPOSITION SUITABLE FOR PRINTING AND PRINTING METHOD UTILIZING THE SAME

    외스터라이허안드레아스 (Inventor), 그리쎄어토마스 (Inventor), 에들러마티아스 (Inventor), 모스테겔플로리안 (Inventor), 가스너마르티나 (Inventor), 로스마인하트 (Inventor) & 빌리아니야니네 (Inventor), 26 Jan 2017, IPC No. C09D 4/ 00 A I, Patent No. KR20170010309, Priority date 14 Apr 2015, Priority No. WO2015EP58082

    Research output: Patent

  31. Published

    Inkjet Printing of Soft, Stretchable Optical Waveguides through the Photopolymerization of High-Profile Linear Patterns

    Samusjew, A., Kratzer, M., Moser, A., Teichert, C. & Krawczyk, K., 17 Jan 2017, In: ACS Applied Materials & Interfaces. 9.2017, 5, p. 4941-4947 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Investigating Photocurable Thiol-Yne Resins for Biomedical Materials

    Oesterreicher, A., Moser, A., Edler, M., Griesser, H., Schlögl, S., Pichelmayer, M. & Grießer, T., 2017, In: Macromolecular materials and engineering. 302.2017, 5, 9 p., 1600450.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Investigationg Photocurable Thiol-Yne Resins for Biomedical Materials

    Oesterreicher, A., Moser, A., Edler, M., Griesser, H., Schlögl, S., Pichelmayer, M. & Grießer, T., 2017

    Research output: Non-textual form › Web publication/site › Research

  34. Published

    Light triggered formation of photo-responsive epoxy based networks

    Radl, S. V., Roppolo, I., Pölzl, K., Ast, M., Spreitz, J., Grießer, T., Kern, W., Schlögl, S. & Sangermano, M., 2017, In: Polymer. 109.2017, 27 January, p. 349-357 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Reduced polarity and improved dispersion of microfibrillated cellulose in poly(lactic-acid) provided by residual lignin and hemicellulose

    Winter, A., Andorfer, L., Herzele, S., Zimmermann, T., Saake, B., Edler, M., Grießer, T., Konnerth, J. & Gindl-Altmutter, W., 2017, In: Journal of materials science. 52.2017, 1, p. 60-72 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Suzuki-Miyaura coupling reactions using novel metal oxide supported ionic palladium catalysts

    Lichtenegger, G. J., Maier, M. C., Hackl, M., Khinast, J. G., Gössler, W., Grießer, T., Phani Kumar, V. S., Gruber-Woelfler, H. & Deshpande, P. A., 2017, In: Journal of molecular catalysis / A. 426.2017, 39, p. 39-51 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. 2016
  38. Published

    Resin composition suitable for printing and printing method utilizing the same

    Oesterreicher, A. (Inventor), Griesser, T. (Inventor), Edler, M. (Inventor), Mostegel, F. (Inventor), Gassner, M. (Inventor), Roth, M. (Inventor) & Billiani, J. (Inventor), 17 Nov 2016, IPC No. C08L 101/ 16 A I, Patent No. AU2015248910, Priority date 14 Apr 2015, Priority No. WO2015EP58082

    Research output: Patent

  39. E-pub ahead of print

    Exploring functionalized benzophenones as low-migration photoinitiators for vinyl carbonate/thiol formulations

    Roth, M., Hennen, D., Oesterreicher, A., Mostegel, F., Kappaun, S., Edler, M. & Grießer, T., 3 Nov 2016, (E-pub ahead of print) In: European polymer journal. 88.2017, March, p. 407-411 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Tough and Biocompatible Thiol-yne Based Photopolymers for 3D Printing of Biomedical Materials

    Grießer, T., 29 Sept 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  41. Published

    Application of Vinyl Carbonates as Low-Toxic Monomers in Digital Inkjet Inks

    Edler, M., Mostegel, F. & Grießer, T., 12 Sept 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  42. Published

    Thiol-Yne Based Low-Cytotoxic Monomers: Towards Biocompatible and Tough Photopolymers for 3D Printing;

    Grießer, T., 11 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  43. Published

    Cantilever bending based on humidity-actuated mesoporous silica/silicon bilayers

    Ganser, C., Popovski, G., Morak, R., Sharifi Rajabi, P., Marmiroli, B., Sartori, B., Amenitsch, H., Grießer, T., Teichert, K. C. & Paris, O., 28 Apr 2016, In: Beilstein journal of nanotechnology . 7.2016, April, p. 637-644 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Photopolymerisierbare Monomere für den 3D Druck von biokompatiblen Strukturen

    Oesterreicher, A., Wiener, J., Roth, M., Moser, A., Mostegel, F., Edler, M., Pinter, G. & Grießer, T., Apr 2016, Schriftenreihe Kunststofftechnik Leoben: 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt. Vol. 6. p. 127-131

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Adsorption Studies of Organophosphonic Acids on Differently Activated Gold Surfaces

    Niegelhell, K., Leimgruber, S., Grießer, T., Brandl, C., Chernev, B., Schennach, R., Trimmel, G. & Spirk, S., 26 Jan 2016, In: Langmuir. 32.2016, 6, p. 1550-1559 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Reactive cellulose-based thin films-a concept for multifunctional polysaccharide surfaces

    Elschner, T., Reishofer, D., Kargl, R., Grießer, T., Heinze, T. & Kleinschek, K. S., 1 Jan 2016, In: RSC Advances. 6, 76, p. 72378-72385 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    A Novel UV Tunable and Patternable Polyaniline Derivate as a Charge Injection Layer in OLEDs

    Simone, R., Grießer, T., Edler, M., Kern, W., Rath, T., Trimmel, G., Pavitschitz, A., Teichert, C., Simbrunner, C., Schwabegger, G. & Sitter, H., 2016.

    Research output: Contribution to conference › Poster › Research

  48. Published

    Data on synthesis and thermo-mechanical properties of stimuli-responsive rubber materials bearing pendant anthracene groups

    Manhart, J. C., Ayalur Karunakaran, S., Radl, S., Oesterreicher, A., Moser, A., Ganser, C., Teichert, C., Pinter, G. G., Kern, W., Grießer, T. & Schlögl, S., 2016, In: Data in Brief. 2016, 9, p. 524-529

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Data on synthesis and thermo-mechanical properties of stimuli-responsive rubber materials of pendant anthracene groups

    Manhart, J., Ayalur-Karunakaran, S., Radl, S. V., Oesterreicher, A., Moser, A., Ganser, C., Teichert, C., Pinter, G., Kern, W., Grießer, T. & Schlögl, S., 2016, In: Data in Brief. 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Design and application of photo-reversible elastomer networks by using the [4πs+4πs] cycloaddition reaction of pendant anthracene groups

    Manhart, J., Ayalur-Karunakaran, S., Oesterreicher, A., Radl, S. V., Moser, A., Ganser, C., Teichert, C., Pinter, G., Kern, W., Grießer, T. & Schlögl, S., 2016, In: Polymer. 102.2016, October, p. 10-20 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Exploring Network Formation of Tough and Biocompatible Thiol-yne Based Photopolymers

    Oesterreicher, A., Gorsche, C., Ayalur-Karunakaran, S., Moser, A., Edler, M., Pinter, G., Schlögl, S., Liska, R. & Grießer, T., 2016, In: Macromolecular rapid communications. 37

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Exploring thiol-yne based monomers as low cytotoxic building blocks for radical photopolymerization

    Oesterreicher, A., Ayalur-Karunakaran, S., Moser, A., Mostegel, F., Edler, M., Kaschnitz, P., Pinter, G., Trimmel, G., Schlögl, S. & Grießer, T., 2016, In: Journal of polymer science : A, Polymer chemistry. 54, p. 3484-3494

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Exploring thiol-yne based monomers as low cytotoxic building blocks for radical photopolymerization;

    Oesterreicher, A.; Ayalur-Karunakaran, S.; Moser, A.; Mostegel, F.H.; Edler, M.; Kaschnitz, P.; Pinter, G.; Trimmel, G.; Schlögl, S.; Griesser, T., 2016, In: Journal of polymer science : A, Polymer chemistry. 54, , 21, p. 3484-3494.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Lignocellulose Nanofiber-Reinforced Polystyrene Produced from Composite Microspheres Obtained in Suspension Polymerization Shows Superior Mechanical Performance

    Ballner, D., Herzele, S., Keckes, J., Edler, M., Griesser, T., Saake, B., Liebner, F., Potthast, A., Paulik, C. & Gindl-Altmutter, W., 2016, In: ACS Applied Materials & Interfaces. 8, 21, p. 13520-13525 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Low migration type I photoinitiators for biocompatible thiol-ene formulations

    Oesterreicher, A., Roth, M., Hennen, D., Mostegel, F., Edler, M., Kappaun, S. & Grießer, T., 2016, In: European polymer journal. 88, 3, p. 393 - 402 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Microfibrillated Lignocellulose Enables the Suspension-Polymerisation of Unsaturated Polyester Resin for Novel Composite Applications

    Yutao Yan 1, Sabine Herzele 2, Arunjunai Raj Mahendran 2, Matthias Edler 3, Thomas Griesser 3, Bodo Saake 4, Jianzhang Li 1,* and Wolfgang Gindl-Altmutter 5,*, 2016, In: Polymers. 8, 255

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Photoreversible Crosslinking of Elastomeric Materials Comprising Spatially Resolved Switchable Characteristics

    Kaiser, S., Manhart, J. C., Ayalur Karunakaran, S., Moser, A., Oesterreicher, A., Pinter, G. G., Teichert, C., Grießer, T., Kern, W. & Schlögl, S., 2016.

    Research output: Contribution to conference › Poster › Research

  58. Published

    Thiol-Yne Derived Photopolymers from Low-Cytotoxic 3D-Printing Resins

    Hartmann, D., Oesterreicher, A., Edler, M., Moser, A., Pinter, G. & Grießer, T., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  59. Published

    Tough and degradable photopolymers derived from alkyne monomers for 3D printing of biomedical materials

    Oesterreicher, A., Wiener, J., Roth, M., Moser, A., Gmeiner , R., Edler, M., Pinter, G. & Grießer, T., 2016, In: Polymer Chemistry. 7, p. 5169-5180

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Vinylcarbonates as low-toxic monomers for digital ink-jet inks: Promising alternatives to acrylate based systems

    Mostegel, F., Roth, M., Gassner, M., Oesterreicher, A., Piock, R., Edler, M. & Grießer, T., 2016, In: Progress in organic coatings.

    Research output: Contribution to journal › Article › Research › peer-review

  61. 2015
  62. Published

    From Photosensitive Polymers for Advanced Applications to High-performance Photopolymers

    Grießer, T., 10 Dec 2015.

    Research output: Contribution to conference › Presentation › Research

  63. Published

    New strategies towards reversible and mendable epoxy based materials employing [4πs + 4πs] photocycloaddition and thermal cycloreversion of pendant anthracene groups

    Radl, S.a, Kreimer, M.a, Griesser, T.bc, Oesterreicher, A.c, Moser, A.d, Kern, W.ab, Schlögl, S.a, 2 Dec 2015, In: Polymer. Volume 80, p. Pages 76-87

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Multidimensionally photopatterned substrates on the basis of monosaccharide derivatives, their oligomers and their polymers and a method of production thereof

    Stana, K. K. (Inventor), Spirk, S. (Inventor), Griesser, T. (Inventor), Kern, W. (Inventor), Kargl, R. (Inventor) & Ribitsch, V. (Inventor), 30 Nov 2015, IPC No. G03F 7/ 00 C I, Patent No. SI2784586 (T1), 30 Nov 2015, Priority date 27 Mar 2013, Priority No. EP20130002404

    Research output: Patent

  65. Published

    Verfahren zur Herstellung eines epoxidbasierten Duromers und damit hergestelltes Duromer

    Griesser, T. T. (Inventor), Kern, W. M. T. (Inventor), Radl, S. (Inventor) & Schlögl, S. T. (Inventor), 15 Nov 2015, IPC No. C08G 59/ 40 A I, Patent No. AT515711, Priority date 23 Apr 2014, Priority No. AT20140050295

    Research output: Patent

  66. Published

    RESIN COMPOSITION SUITABLE FOR PRINTING AND PRINTING METHOD UTILIZING THE SAME

    Oesterreicher, A. (Inventor), Griesser, T. (Inventor), Edler, M. (Inventor), Mostegel, F. (Inventor), Gassner, M. (Inventor), Roth, M. (Inventor) & Billiani, J. (Inventor), 22 Oct 2015, IPC No. C08L 101/ 16 A I, Patent No. CA2979581, 22 Oct 2015, Priority date 14 Apr 2014, Priority No. EP2015058082W·2015-04-14; GB201406683A·2014-04-14

    Research output: Patent

  67. Published

    RESIN COMPOSITION SUITABLE FOR PRINTING AND PRINTING METHOD UTILIZING THE SAME

    Oesterreicher, A. (Inventor), Griesser, T. (Inventor), Edler, M. (Inventor), Mostegel, F. (Inventor), Gassner, M. (Inventor), Roth, M. (Inventor) & Billiani, J. (Inventor), 22 Oct 2015, IPC No. C08L 101/ 16 A I, Patent No. WO2015158718, Priority date 14 Apr 2014, Priority No. GB20140006683

    Research output: Patent

  68. Published

    Microwave-Assisted Syntheses in Recyclable Ionic Liquids: Photoresists Based on Renewable Resources

    Petit, C.a, Luef, K.P.bc, Edler, M.d, Griesser, T.d, Kremsner, J.M.e, Stadler, A.e, Grassl, B.a, Reynaud, S.a , Wiesbrock, F.b, Edler, M. & Wiesbrock, F., 1 Oct 2015, In: ChemSusChem. Volume 8, Issue 20 , p. Pages 3401-3404

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Promising Biocompatible Monomers for Thiol-yne Based Photopolymers

    Oesterreicher, A., Wiener, J., Roth, M., Moser, A., Mostegel, F., Samusjew, A., Edler, M., Pinter, G. & Grießer, T., 21 Sept 2015, Regional Conference Polymer Processing Society Graz 2015 - Book of Abstracts. p. 295 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    Silicon-based mercaptans: High-performance monomers for thiol-ene photopolymerization

    Roth, M., Oesterreicher, A., Mostegel, F., Moser, A., Pinter, G., Edler, M., Piock, R. & Grießer, T., 17 Aug 2015, In: Journal of polymer science : A, Polymer chemistry. 54, 3, p. 418-424 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Photocleavable epoxy based materials

    Radl, S. V., Kreimer, M., Manhart, J., Grießer, T., Moser, A., Pinter, G., Kalinka, G., Kern, W. & Schlögl, S., 15 Jun 2015, In: Polymer. 2015, Vol.69, July, p. 159-168

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    METHOD OF MANUFACTURING AN ELECTRICALLY CONDUCTIVE OR SEMICONDUCTIVE STRUCTURE AND ELECTRONIC DEVICE COMPRISING THE SAME

    Griesser, T. (Inventor) & Wolfberger, A. (Inventor), 7 May 2015, IPC No. H05K 3/ 02 A I, Patent No. WO2015062892, Priority date 31 Oct 2013, Priority No. GB20130019263

    Research output: Patent

  73. Published

    Comparative investigation of different silane surface functionalizations of fullerene-like WS2

    Haba, D., Griesser, T., Müller, U. & Brunner, A. J., 6 May 2015, In: Journal of materials science. 50, 15, p. 5125-5135 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    New water-based sol-gel synthesis routes for LaNi0.6Fe0.4O3-δ thin films

    Perz, M.a , Bucher, E.a, Sitte, W.a, Griesser, T.b , 1 May 2015, In: Solid State Ionics. Volume 273, p. Pages 30-34 Article number 13512.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Cellulose-Derivative-Based Gate Dielectric for High-Performance Organic Complementary Inverters

    Petritz, A., Wolfberger, A., Fian, A., Griesser, T., Irimia-Vladu, M. & Stadlober, B., 1 Jan 2015, In: Advanced materials. 27, 46, p. 7645-7656 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Dielectrics: Cellulose-Derivative-Based Gate Dielectric for High-Performance Organic Complementary Inverters (Adv. Mater. 46/2015)

    Petritz, A., Wolfberger, A., Fian, A., Griesser, T., Irimia-Vladu, M. & Stadlober, B., 1 Jan 2015, In: Advanced materials. 27, 46, 1 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  77. Published

    Cellulose based thin films as a platform for drug release studies to mimick wound dressing materials

    Maver, T., Maver, U., Mostegel, F., Grießer, T., Spirk, S., Smrke, D. M. & Stana-Kleinschek, K., 2015, In: Cellulose. 22.2015, February, p. 749-761 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Design of Stimuli Triggered Smart Composite Materials with Enhanced Recyclability and Selfhealing Properties

    Radl, S. V., Grießer, T., Kreimer, M., Oesterreicher, A., Kern, W. & Schlögl, S., 2015.

    Research output: Contribution to conference › Presentation › Research

  79. Published

    Digital Inkjet Inks Based on Biocompatible Vinylcarbonates: An Alternative to Acrylates

    Mostegel, F., Roth, M., Gassner, M., Oesterreicher, A., Piock, R., Edler, M. & Grießer, T., 2015.

    Research output: Contribution to conference › Poster › Research

  80. Published

    New strategies towards reversible and mendable epoxy based materials employing [4πs+4πs] photocycloaddition and thermal cycloreversion of pendant anthracene groups

    Radl, S., Kreimer, M., Grießer, T., Oesterreicher, A., Moser, A., Kern, W. & Schlögl, S., 2015, In: Polymer. p. 76-87 80.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Photochemical Patterning of Green Fluorescent Protein on Molecular Layers

    Mostegel, F., Ducker, R. E., Rieger, P., El Zubir, O., Xia, S., Radl, S., Edler, M., Cartron, M. L., Leggett, G. J. & Grießer, T., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  82. Published

    Versatile thiol-based reactions for micrometer- and nanometer-scale photopatterning of polymers and biomolecules

    Mostegel, F., Ducker, R. E., Rieger, P., El Zubir, O., Xia, S., Radl, S. V., Edler, M., Cartron, M. L., Hunter, C. N., Leggett, G. J. & Grießer, T., 2015, In: Journal of Materials Chemistry B. 3, 21, p. 4431–4438

    Research output: Contribution to journal › Article › Research › peer-review

  83. 2014
  84. Published

    Photolithographic patterning of cellulose: a versatile dual-tone photoresist for advanced applications

    Wolfberger, A., Petritz, A., Fian, A., Herka, J., Schmidt, V., Stadlober, B., Kargl, R., Spirk, S. & Grießer, T., 16 Oct 2014, In: Cellulose. Volume 22, Issue 1, p. 717-727 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Mehrdimensional photostrukturierte Substrate auf der Grundlage von Monosaccharidderivaten, deren Oligomere und deren Polymere, und Herstellungsverfahren dafür

    Stana Kleinschek, K. (Inventor), Spirk, S. (Inventor), Griesser, T. (Inventor), Kern, W. (Inventor), Kargl, R. (Inventor) & Ribitsch, V. (Inventor), 1 Oct 2014, IPC No. G03F 7/ 039 A I, Patent No. EP2784586, Priority date 27 Mar 2013, Priority No. EP20130002404

    Research output: Patent

  86. Published

    Photoregeneration of Trimethylsilyl Cellulose as a Tool for Microstructuring Ultrathin Cellulose Supports

    Wolfberger, A., Kargl, R., Grießer, T. & Spirk, S., Oct 2014, In: Molecules. 19, 10, p. 16266-16273

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Migrationsarme Photoinitiatoren für Thiol-En / Thiol-In Systeme

    Grießer, T. (Inventor), 1 Jan 2014

    Research output: Patent

  88. Published

    Multidimensionally photopatterned substates on the basis of monosaccaride derivatives, their oligomers and their polymers and a method of production there of

    Grießer, T. (Inventor), 1 Jan 2014

    Research output: Patent

  89. Published

    Resin composition suitable for printing and printing mehtod utilizing the same, Patent application

    Grießer, T. (Inventor), 1 Jan 2014

    Research output: Patent

  90. Published

    Verfahren zur Herstellung eines epoxidbasierten Harzes und damit hergestelltes Harz

    Grießer, T. (Inventor), 1 Jan 2014

    Research output: Patent

  91. Published

    Adjustment of Organic Electronic Device Performance by Means of UV-Light

    Edler, M., Grießer, T., Teichert, C., Zojer, E. & Marchl, M., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  92. Published

    Cellulose based thin films as a platform for drug release studies to minick wound dressing materials

    Maver, T., Maver, U., Mostegel, F., Grießer, T., Spirk, S., Smrke, D. M. & Stana-Kleinschek, K., 2014, In: Cellulose.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Christian Doppler Laboratory for Functional and Polymer Based Ink-Jet Inks

    Grießer, T. & Edler, M., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. p. 50-54

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Dissolution Testing of Hardly Soluble Materials by Surface Sensitive Techniques: Clotrimazole from an Insoluble Matrix

    Ehmann, H. M. A., Winter, S., Grießer, T., Keimel, R., Schrank, S., Zimmer, A. & Werzer, O., 2014, In: Pharmaceutical Research. p. 2708-2708

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Ex situ and In situ Characterization of Patterned Photoreactive Thin Organic Surface Layers Using Friction Force Microscopy

    Shen, Q., Edler, M., Grießer, T., Knall, A.-C., Trimmel, G., Kern, W. & Teichert, C., 2014, In: Scanning. 36, p. 590-598

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Influence of TiOx and Ti cathode interlayers on the performance and stability of hybrid solar cells

    Dunst, S., Rath, T., Moscher, S., Troi, L., Edler, M., Grießer, T. & Trimmel, G., 2014, In: Solar energy materials and solar cells. 130, p. 217-224

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    New Epoxy-Based Resins and Functional Inorganic Fillers with Tunable Mechanical Properties for the Preparation of Composite Materials with Enhanced Recyclability

    Radl, S. V., Grießer, T., Kreimer, M., Oesterreicher, A., Kern, W. & Schlögl, S., 2014, 22nd Annual International Conference on Composites/Nanoengineering (ICCE-22). p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    New water-based sol-gel synthesis routes for LaNi 0.6 Fe 0.4 O3-& thin films

    Perz, M., Bucher, E., Sitte, W. & Grießer, T., 2014, In: Solid State Ionics.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Photochemical Patterning of Proteins in Thiol-terminated Monolayers

    Mostegel, F., Rieger, P., Edler, M. & Grießer, T., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  100. Published

    Photo-induced crosslinking and thermal de-crosslinking in polynorbornenes bearing pendant anthracene groups

    Radl, S. V., Roth, M., Gassner, M., Wolfberger, A., Lang, A., Hirschmann, B., Trimmel, G., Kern, W. & Grießer, T., 2014, In: European polymer journal. 52, p. 98-104

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Photo-Induced Polymer Brush Growth on Thiol Terminated Self-Assembled Monolayers

    Mostegel, F., Rieger, P., Edler, M. & Grießer, T., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  102. Published

    Photoreversible Crosslinking of Elastomer Materials

    Manhart, J., Fleischmann, D. D., Ayalur-Karunakaran, S., Grießer, T., Oesterreicher, A., Kern, W. & Schlögl, S., 2014, Photoreversible Crosslinking of Elastomer Materials. p. 60-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    Photosensitive polymers for optical devices and organic electronics

    Grießer, T., 2014

    Research output: Thesis › Habilitation thesis › peer-review

  104. Published

    Preparation of PDMS ultrathin films and patterned surface modification with cellulose

    Bracic, M., Mohan, T., Kargl, R., Grießer, T., Doliska, A., Ribitsch, V., Stana-Kleinschek, K. & Fras-Zemljica, L., 2014, In: RSC Advances. 4, 23, p. 11955-11961

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    Smart composite materials bearing photoswitchable crosslinks

    Radl, S. V., Grießer, T., Kreimer, M., Oesterreicher, A., Kern, W. & Schlögl, S., 2014, 3rd European Symposium of Photopolymer Science. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 Next
View graph of relations

Contact

Phone: 2358

Latest Research Output

View more (290)